From: Christian Marangi <ansuelsmth@gmail.com>
To: Florian Fainelli <florian.fainelli@broadcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@broadcom.com>,
Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Christian Marangi <ansuelsmth@gmail.com>
Subject: [net-next PATCH 2/3] net: phy: broadcom: Convert to phy_id_compare_model()
Date: Tue, 9 Sep 2025 22:28:11 +0200 [thread overview]
Message-ID: <20250909202818.26479-2-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20250909202818.26479-1-ansuelsmth@gmail.com>
Convert driver to phy_id_compare_model() helper instead of the custom
BRCM_PHY_MODEL macro.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
drivers/net/phy/broadcom.c | 42 ++++++++++++++++++--------------------
1 file changed, 20 insertions(+), 22 deletions(-)
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index a60e58ef90c4..46ca739dcd4a 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -23,9 +23,6 @@
#include <linux/irq.h>
#include <linux/gpio/consumer.h>
-#define BRCM_PHY_MODEL(phydev) \
- ((phydev)->drv->phy_id & (phydev)->drv->phy_id_mask)
-
#define BRCM_PHY_REV(phydev) \
((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask))
@@ -249,8 +246,8 @@ static int bcm54xx_phydsp_config(struct phy_device *phydev)
if (err < 0)
return err;
- if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
- BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) {
+ if (phy_id_compare_model(phydev->drv->phy_id, PHY_ID_BCM50610) ||
+ phy_id_compare_model(phydev->drv->phy_id, PHY_ID_BCM50610M)) {
/* Clear bit 9 to fix a phy interop issue. */
err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP08,
MII_BCM54XX_EXP_EXP08_RJCT_2MHZ);
@@ -264,7 +261,7 @@ static int bcm54xx_phydsp_config(struct phy_device *phydev)
}
}
- if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM57780) {
+ if (phy_id_compare_model(phydev->drv->phy_id, PHY_ID_BCM57780)) {
int val;
val = bcm_phy_read_exp(phydev, MII_BCM54XX_EXP_EXP75);
@@ -292,12 +289,12 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
bool clk125en = true;
/* Abort if we are using an untested phy. */
- if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 &&
- BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 &&
- BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M &&
- BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54210E &&
- BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54810 &&
- BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54811)
+ if (!(phy_id_compare_model(phydev->drv->phy_id, PHY_ID_BCM57780) ||
+ phy_id_compare_model(phydev->drv->phy_id, PHY_ID_BCM50610) ||
+ phy_id_compare_model(phydev->drv->phy_id, PHY_ID_BCM50610M) ||
+ phy_id_compare_model(phydev->drv->phy_id, PHY_ID_BCM54210E) ||
+ phy_id_compare_model(phydev->drv->phy_id, PHY_ID_BCM54810) ||
+ phy_id_compare_model(phydev->drv->phy_id, PHY_ID_BCM54811)))
return;
val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3);
@@ -306,8 +303,8 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
orig = val;
- if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
- BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) &&
+ if ((phy_id_compare_model(phydev->drv->phy_id, PHY_ID_BCM50610) ||
+ phy_id_compare_model(phydev->drv->phy_id, PHY_ID_BCM50610M)) &&
BRCM_PHY_REV(phydev) >= 0x3) {
/*
* Here, bit 0 _disables_ CLK125 when set.
@@ -316,7 +313,8 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
clk125en = false;
} else {
if (phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) {
- if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54811) {
+ if (!phy_id_compare_model(phydev->drv->phy_id,
+ PHY_ID_BCM54811)) {
/* Here, bit 0 _enables_ CLK125 when set */
val &= ~BCM54XX_SHD_SCR3_DEF_CLK125;
}
@@ -330,9 +328,9 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
if (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) {
- if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54210E ||
- BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810 ||
- BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54811)
+ if (phy_id_compare_model(phydev->drv->phy_id, PHY_ID_BCM54210E) ||
+ phy_id_compare_model(phydev->drv->phy_id, PHY_ID_BCM54810) ||
+ phy_id_compare_model(phydev->drv->phy_id, PHY_ID_BCM54811))
val |= BCM54XX_SHD_SCR3_RXCTXC_DIS;
else
val |= BCM54XX_SHD_SCR3_TRDDAPD;
@@ -461,14 +459,14 @@ static int bcm54xx_config_init(struct phy_device *phydev)
if (err < 0)
return err;
- if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
- BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) &&
+ if ((phy_id_compare_model(phydev->drv->phy_id, PHY_ID_BCM50610) ||
+ phy_id_compare_model(phydev->drv->phy_id, PHY_ID_BCM50610M)) &&
(phydev->dev_flags & PHY_BRCM_CLEAR_RGMII_MODE))
bcm_phy_write_shadow(phydev, BCM54XX_SHD_RGMII_MODE, 0);
bcm54xx_adjust_rxrefclk(phydev);
- switch (BRCM_PHY_MODEL(phydev)) {
+ switch (phydev->drv->phy_id & PHY_ID_MATCH_MODEL_MASK) {
case PHY_ID_BCM50610:
case PHY_ID_BCM50610M:
err = bcm54xx_config_clock_delay(phydev);
@@ -693,7 +691,7 @@ static int bcm5481x_read_abilities(struct phy_device *phydev)
* So we must read the bcm54811 as unable to auto-negotiate
* in BroadR-Reach mode.
*/
- if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54811)
+ if (phy_id_compare_model(phydev->drv->phy_id, PHY_ID_BCM54811))
aneg = 0;
else
aneg = val & LRESR_LDSABILITY;
--
2.51.0
next prev parent reply other threads:[~2025-09-09 20:28 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-09 20:28 [net-next PATCH 1/3] net: phy: introduce phy_id_compare_model() PHY ID helper Christian Marangi
2025-09-09 20:28 ` Christian Marangi [this message]
2025-09-09 21:30 ` [net-next PATCH 2/3] net: phy: broadcom: Convert to phy_id_compare_model() Andrew Lunn
2025-09-09 21:35 ` Florian Fainelli
2025-09-09 20:28 ` [net-next PATCH 3/3] net: phy: broadcom: Convert to PHY_ID_MATCH_MODEL macro Christian Marangi
2025-09-09 21:31 ` Andrew Lunn
2025-09-09 21:36 ` Florian Fainelli
2025-09-09 21:27 ` [net-next PATCH 1/3] net: phy: introduce phy_id_compare_model() PHY ID helper Andrew Lunn
2025-09-09 21:35 ` Florian Fainelli
2025-09-11 13:00 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250909202818.26479-2-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=andrew@lunn.ch \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=florian.fainelli@broadcom.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).