From: Rob Herring <robh@kernel.org>
To: Chen-Yu Tsai <wens@kernel.org>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej@kernel.org>,
Samuel Holland <samuel@sholland.org>,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
Andre Przywara <andre.przywara@arm.com>
Subject: Re: [PATCH net-next v4 01/10] dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Date: Tue, 9 Sep 2025 21:22:30 -0500 [thread overview]
Message-ID: <20250910022230.GA3646514-robh@kernel.org> (raw)
In-Reply-To: <20250908181059.1785605-2-wens@kernel.org>
On Tue, Sep 09, 2025 at 02:10:50AM +0800, Chen-Yu Tsai wrote:
> From: Chen-Yu Tsai <wens@csie.org>
>
> The Allwinner A523 SoC family has a second Ethernet controller, called
> the GMAC200 in the BSP and T527 datasheet, and referred to as GMAC1 for
> numbering. This controller, according to BSP sources, is fully
> compatible with a slightly newer version of the Synopsys DWMAC core.
> The glue layer around the controller is the same as found around older
> DWMAC cores on Allwinner SoCs. The only slight difference is that since
> this is the second controller on the SoC, the register for the clock
> delay controls is at a different offset. Last, the integration includes
> a dedicated clock gate for the memory bus and the whole thing is put in
> a separately controllable power domain.
>
> Add a compatible string entry for it, and work in the requirements for
> a second clock and a power domain.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
> Changes since v2:
> - Added "select" to avoid matching against all dwmac entries
> Changes since v1:
> - Switch to generic (tx|rx)-internal-delay-ps properties
> ---
> .../net/allwinner,sun8i-a83t-emac.yaml | 96 ++++++++++++++++++-
> 1 file changed, 94 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
> index 2ac709a4c472..9d205c5d93ca 100644
> --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
> +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
> @@ -10,6 +10,21 @@ maintainers:
> - Chen-Yu Tsai <wens@csie.org>
> - Maxime Ripard <mripard@kernel.org>
>
> +# We need a select here so we don't match all nodes with 'snps,dwmac'
> +select:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - allwinner,sun8i-a83t-emac
> + - allwinner,sun8i-h3-emac
> + - allwinner,sun8i-r40-gmac
> + - allwinner,sun8i-v3s-emac
> + - allwinner,sun50i-a64-emac
> + - allwinner,sun55i-a523-gmac200
> + required:
> + - compatible
> +
> properties:
> compatible:
> oneOf:
> @@ -26,6 +41,9 @@ properties:
> - allwinner,sun50i-h616-emac0
> - allwinner,sun55i-a523-gmac0
> - const: allwinner,sun50i-a64-emac
> + - items:
> + - const: allwinner,sun55i-a523-gmac200
> + - const: snps,dwmac-4.20a
>
> reg:
> maxItems: 1
> @@ -37,14 +55,19 @@ properties:
> const: macirq
>
> clocks:
> - maxItems: 1
> + minItems: 1
> + maxItems: 2
>
> clock-names:
> - const: stmmaceth
> + minItems: 1
> + maxItems: 2
minItems: 1
items:
- const: stmmaceth
- const: mbus
>
> phy-supply:
> description: PHY regulator
>
> + power-domains:
> + maxItems: 1
> +
> syscon:
> $ref: /schemas/types.yaml#/definitions/phandle
> description:
> @@ -191,6 +214,45 @@ allOf:
> - mdio-parent-bus
> - mdio@1
>
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: allwinner,sun55i-a523-gmac200
> + then:
> + properties:
> + clocks:
> + minItems: 2
> + clock-names:
> + items:
> + - const: stmmaceth
> + - const: mbus
Just 'minItems: 2' here.
> + tx-internal-delay-ps:
> + default: 0
> + minimum: 0
> + maximum: 700
> + multipleOf: 100
> + description:
> + External RGMII PHY TX clock delay chain value in ps.
> + rx-internal-delay-ps:
> + default: 0
> + minimum: 0
> + maximum: 3100
> + multipleOf: 100
> + description:
> + External RGMII PHY TX clock delay chain value in ps.
> + required:
> + - power-domains
> + else:
> + properties:
> + clocks:
> + maxItems: 1
> + clock-names:
> + items:
> + - const: stmmaceth
maxItems: 1
> + power-domains: false
> +
> +
> unevaluatedProperties: false
>
> examples:
> @@ -323,4 +385,34 @@ examples:
> };
> };
>
> + - |
> + ethernet@4510000 {
> + compatible = "allwinner,sun55i-a523-gmac200",
> + "snps,dwmac-4.20a";
> + reg = <0x04510000 0x10000>;
> + clocks = <&ccu 117>, <&ccu 79>;
> + clock-names = "stmmaceth", "mbus";
> + resets = <&ccu 43>;
> + reset-names = "stmmaceth";
> + interrupts = <0 47 4>;
> + interrupt-names = "macirq";
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmii1_pins>;
> + power-domains = <&pck600 4>;
> + syscon = <&syscon>;
> + phy-handle = <&ext_rgmii_phy_1>;
> + phy-mode = "rgmii-id";
> + snps,fixed-burst;
> + snps,axi-config = <&gmac1_stmmac_axi_setup>;
> +
> + mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ext_rgmii_phy_1: ethernet-phy@1 {
> + reg = <1>;
> + };
> + };
> + };
> ...
> --
> 2.39.5
>
next prev parent reply other threads:[~2025-09-10 2:22 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-08 18:10 [PATCH net-next v4 00/10] net: stmmac: Add support for Allwinner A523 GMAC200 Chen-Yu Tsai
2025-09-08 18:10 ` [PATCH net-next v4 01/10] dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible Chen-Yu Tsai
2025-09-10 2:22 ` Rob Herring [this message]
2025-09-08 18:10 ` [PATCH net-next v4 02/10] net: stmmac: Add support for Allwinner A523 GMAC200 Chen-Yu Tsai
2025-09-11 18:09 ` Russell King (Oracle)
2025-09-11 18:17 ` Chen-Yu Tsai
2025-09-12 4:09 ` Muhammed Subair
2025-09-12 4:22 ` Chen-Yu Tsai
2025-09-08 18:10 ` [PATCH net-next v4 03/10] soc: sunxi: sram: add entry for a523 Chen-Yu Tsai
2025-09-08 18:10 ` [PATCH net-next v4 04/10] soc: sunxi: sram: register regmap as syscon Chen-Yu Tsai
2025-09-08 18:10 ` [PATCH net-next v4 05/10] arm64: dts: allwinner: a523: Add GMAC200 ethernet controller Chen-Yu Tsai
2025-09-08 18:10 ` [PATCH net-next v4 06/10] arm64: dts: allwinner: a527: cubie-a5e: Add ethernet PHY reset setting Chen-Yu Tsai
2025-09-08 18:10 ` [PATCH net-next v4 07/10] arm64: dts: allwinner: a527: cubie-a5e: Enable second Ethernet port Chen-Yu Tsai
2025-09-08 18:10 ` [PATCH net-next v4 08/10] arm64: dts: allwinner: t527: avaota-a1: Add ethernet PHY reset setting Chen-Yu Tsai
2025-09-08 18:10 ` [PATCH net-next v4 09/10] arm64: dts: allwinner: t527: avaota-a1: enable second Ethernet port Chen-Yu Tsai
2025-09-08 18:10 ` [PATCH net-next v4 10/10] arm64: dts: allwinner: t527: orangepi-4a: Enable " Chen-Yu Tsai
2025-09-10 12:52 ` (subset) [PATCH net-next v4 00/10] net: stmmac: Add support for Allwinner A523 GMAC200 Chen-Yu Tsai
2025-09-10 15:50 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250910022230.GA3646514-robh@kernel.org \
--to=robh@kernel.org \
--cc=andre.przywara@arm.com \
--cc=andrew+netdev@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=jernej@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).