From: Hangbin Liu <liuhangbin@gmail.com>
To: netdev@vger.kernel.org
Cc: Jay Vosburgh <jv@jvosburgh.net>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Simon Horman <horms@kernel.org>, Shuah Khan <shuah@kernel.org>,
linux-kselftest@vger.kernel.org,
Hangbin Liu <liuhangbin@gmail.com>
Subject: [PATCHv3 net 2/2] selftests: bonding: add vlan over bond testing
Date: Wed, 10 Sep 2025 03:19:46 +0000 [thread overview]
Message-ID: <20250910031946.400430-2-liuhangbin@gmail.com> (raw)
In-Reply-To: <20250910031946.400430-1-liuhangbin@gmail.com>
Add a vlan over bond testing to make sure arp/ns target works.
Also change all the configs to mudules.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
---
v3: do not switch all configs to module (Jakub Kicinski)
redirect slowwait_for_counter output to /dev/null
v2: split the patch into 2 parts, the kernel change and test update (Jay Vosburgh)
---
.../drivers/net/bonding/bond_options.sh | 59 +++++++++++++++++++
.../selftests/drivers/net/bonding/config | 1 +
2 files changed, 60 insertions(+)
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_options.sh b/tools/testing/selftests/drivers/net/bonding/bond_options.sh
index 7bc148889ca7..699bb41aae83 100755
--- a/tools/testing/selftests/drivers/net/bonding/bond_options.sh
+++ b/tools/testing/selftests/drivers/net/bonding/bond_options.sh
@@ -7,6 +7,7 @@ ALL_TESTS="
prio
arp_validate
num_grat_arp
+ vlan_over_bond
"
lib_dir=$(dirname "$0")
@@ -376,6 +377,64 @@ num_grat_arp()
done
}
+vlan_over_bond_arp()
+{
+ local mode="$1"
+ RET=0
+
+ bond_reset "mode $mode arp_interval 100 arp_ip_target 192.0.3.10"
+ ip -n "${s_ns}" link add bond0.3 link bond0 type vlan id 3
+ ip -n "${s_ns}" link set bond0.3 up
+ ip -n "${s_ns}" addr add 192.0.3.1/24 dev bond0.3
+ ip -n "${s_ns}" addr add 2001:db8::3:1/64 dev bond0.3
+
+ slowwait_for_counter 5 5 tc_rule_handle_stats_get \
+ "dev eth0.3 ingress" 101 ".packets" "-n ${c_ns}" &> /dev/null || RET=1
+ log_test "vlan over bond arp" "$mode"
+}
+
+vlan_over_bond_ns()
+{
+ local mode="$1"
+ RET=0
+
+ if skip_ns; then
+ log_test_skip "vlan_over_bond ns" "$mode"
+ return 0
+ fi
+
+ bond_reset "mode $mode arp_interval 100 ns_ip6_target 2001:db8::3:10"
+ ip -n "${s_ns}" link add bond0.3 link bond0 type vlan id 3
+ ip -n "${s_ns}" link set bond0.3 up
+ ip -n "${s_ns}" addr add 192.0.3.1/24 dev bond0.3
+ ip -n "${s_ns}" addr add 2001:db8::3:1/64 dev bond0.3
+
+ slowwait_for_counter 5 5 tc_rule_handle_stats_get \
+ "dev eth0.3 ingress" 102 ".packets" "-n ${c_ns}" &> /dev/null || RET=1
+ log_test "vlan over bond ns" "$mode"
+}
+
+vlan_over_bond()
+{
+ # add vlan 3 for client
+ ip -n "${c_ns}" link add eth0.3 link eth0 type vlan id 3
+ ip -n "${c_ns}" link set eth0.3 up
+ ip -n "${c_ns}" addr add 192.0.3.10/24 dev eth0.3
+ ip -n "${c_ns}" addr add 2001:db8::3:10/64 dev eth0.3
+
+ # Add tc rule to check the vlan pkts
+ tc -n "${c_ns}" qdisc add dev eth0.3 clsact
+ tc -n "${c_ns}" filter add dev eth0.3 ingress protocol arp \
+ handle 101 flower skip_hw arp_op request \
+ arp_sip 192.0.3.1 arp_tip 192.0.3.10 action pass
+ tc -n "${c_ns}" filter add dev eth0.3 ingress protocol ipv6 \
+ handle 102 flower skip_hw ip_proto icmpv6 \
+ type 135 src_ip 2001:db8::3:1 action pass
+
+ vlan_over_bond_arp "active-backup"
+ vlan_over_bond_ns "active-backup"
+}
+
trap cleanup EXIT
setup_prepare
diff --git a/tools/testing/selftests/drivers/net/bonding/config b/tools/testing/selftests/drivers/net/bonding/config
index 4d16a69ffc65..832fa1caeb66 100644
--- a/tools/testing/selftests/drivers/net/bonding/config
+++ b/tools/testing/selftests/drivers/net/bonding/config
@@ -10,3 +10,4 @@ CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_SCH_INGRESS=y
CONFIG_NLMON=y
CONFIG_VETH=y
+CONFIG_VLAN_8021Q=m
--
2.50.1
next prev parent reply other threads:[~2025-09-10 3:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-10 3:19 [PATCHv3 net 1/2] bonding: don't set oif to bond dev when getting NS target destination Hangbin Liu
2025-09-10 3:19 ` Hangbin Liu [this message]
2025-09-16 7:05 ` [PATCHv3 net 2/2] selftests: bonding: add vlan over bond testing Paolo Abeni
2025-09-16 8:01 ` Hangbin Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250910031946.400430-2-liuhangbin@gmail.com \
--to=liuhangbin@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=jv@jvosburgh.net \
--cc=kuba@kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=shuah@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).