[PATCH] fix uninit value using in tg3_setup_fiber_mii_phy()

[Alexandr Sapozhnkiov <alsp705@gmail.com>]

From: Alexandr Sapozhnikov <alsp705@gmail.com>

There is a way when we go to the goto fiber_setup_done label 
and the condition current_link_up && current_duplex == DUPLEX_FULL 
is met, then the tg3_setup_flow_control() function is executed with 
undefined values of local_adv and remote_adv.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Alexandr Sapozhnikov <alsp705@gmail.com>
---
 drivers/net/ethernet/broadcom/tg3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 1589a49b876c..1fa61328c1b9 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -5802,7 +5802,7 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, bool force_reset)
 	u32 current_speed = SPEED_UNKNOWN;
 	u8 current_duplex = DUPLEX_UNKNOWN;
 	bool current_link_up = false;
-	u32 local_adv, remote_adv, sgsr;
+	u32 local_adv = 0, remote_adv = 0, sgsr;
 
 	if ((tg3_asic_rev(tp) == ASIC_REV_5719 ||
 	     tg3_asic_rev(tp) == ASIC_REV_5720) &&
-- 
2.43.0