[PATCH] net: usb: lan78xx: Fix lost EEPROM write timeout error(-ETIMEDOUT) in lan78xx_write_raw_eeprom

[PATCH] net: usb: lan78xx: Fix lost EEPROM write timeout error(-ETIMEDOUT) in lan78xx_write_raw_eeprom

[Bhanu Seshu Kumar Valluri]

The function lan78xx_write_raw_eeprom failed to properly propagate EEPROM
write timeout errors (-ETIMEDOUT). In the timeout  fallthrough path, it first
attempted to restore the pin configuration for LED outputs and then
returned only the status of that restore operation, discarding the
original timeout error saved in ret.

As a result, callers could mistakenly treat EEPROM write operation as
successful even though the EEPROM write had actually timed out with no
or partial data write.

To fix this, handle errors in restoring the LED pin configuration separately.
If the restore succeeds, return any prior EEPROM write timeout error saved
in ret to the caller.

Suggested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Fixes: 8b1b2ca83b20 ("net: usb: lan78xx: Improve error handling in EEPROM and OTP operations")
cc: stable@vger.kernel.org
Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com>
---
 Note:
 The patch is compiled and tested using EVB-LAN7800LC.
 The patch was suggested by Oleksij Rempel while reviewing a fix to a bug
 found by syzbot earlier.
 The review mail chain where this fix was suggested is given below.
 https://lore.kernel.org/all/aNzojoXK-m1Tn6Lc@pengutronix.de/

 ChangeLog:
 v1->v2:
  Added cc:stable tag as asked during v1 review.
  V1 Link : https://lore.kernel.org/all/20251004040722.82882-1-bhanuseshukumar@gmail.com/

 drivers/net/usb/lan78xx.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index d75502ebbc0d..5ccbe6ae2ebe 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -1174,10 +1174,13 @@ static int lan78xx_write_raw_eeprom(struct lan78xx_net *dev, u32 offset,
 	}
 
 write_raw_eeprom_done:
-	if (dev->chipid == ID_REV_CHIP_ID_7800_)
-		return lan78xx_write_reg(dev, HW_CFG, saved);
-
-	return 0;
+	if (dev->chipid == ID_REV_CHIP_ID_7800_) {
+		int rc = lan78xx_write_reg(dev, HW_CFG, saved);
+		/* If USB fails, there is nothing to do */
+		if (rc < 0)
+			return rc;
+	}
+	return ret;
 }
 
 static int lan78xx_read_raw_otp(struct lan78xx_net *dev, u32 offset,
-- 
2.34.1

Re: [PATCH] net: usb: lan78xx: Fix lost EEPROM write timeout error(-ETIMEDOUT) in lan78xx_write_raw_eeprom

[Bhanu Seshu Kumar Valluri]

On 09/10/25 11:00, Bhanu Seshu Kumar Valluri wrote:
> The function lan78xx_write_raw_eeprom failed to properly propagate EEPROM
> write timeout errors (-ETIMEDOUT). In the timeout  fallthrough path, it first
> attempted to restore the pin configuration for LED outputs and then
> returned only the status of that restore operation, discarding the
> original timeout error saved in ret.
> 
> As a result, callers could mistakenly treat EEPROM write operation as
> successful even though the EEPROM write had actually timed out with no
> or partial data write.
> 
> To fix this, handle errors in restoring the LED pin configuration separately.
> If the restore succeeds, return any prior EEPROM write timeout error saved
> in ret to the caller.
> 
> Suggested-by: Oleksij Rempel <o.rempel@pengutronix.de>
> Fixes: 8b1b2ca83b20 ("net: usb: lan78xx: Improve error handling in EEPROM and OTP operations")
> cc: stable@vger.kernel.org
> Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com>
> ---
>  Note:
>  The patch is compiled and tested using EVB-LAN7800LC.
>  The patch was suggested by Oleksij Rempel while reviewing a fix to a bug
>  found by syzbot earlier.
>  The review mail chain where this fix was suggested is given below.
>  https://lore.kernel.org/all/aNzojoXK-m1Tn6Lc@pengutronix.de/
> 
>  ChangeLog:
>  v1->v2:
>   Added cc:stable tag as asked during v1 review.
>   V1 Link : https://lore.kernel.org/all/20251004040722.82882-1-bhanuseshukumar@gmail.com/
> 
>  drivers/net/usb/lan78xx.c | 11 +++++++----
>  1 file changed, 7 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
> index d75502ebbc0d..5ccbe6ae2ebe 100644
> --- a/drivers/net/usb/lan78xx.c
> +++ b/drivers/net/usb/lan78xx.c
> @@ -1174,10 +1174,13 @@ static int lan78xx_write_raw_eeprom(struct lan78xx_net *dev, u32 offset,
>  	}
>  
>  write_raw_eeprom_done:
> -	if (dev->chipid == ID_REV_CHIP_ID_7800_)
> -		return lan78xx_write_reg(dev, HW_CFG, saved);
> -
> -	return 0;
> +	if (dev->chipid == ID_REV_CHIP_ID_7800_) {
> +		int rc = lan78xx_write_reg(dev, HW_CFG, saved);
> +		/* If USB fails, there is nothing to do */
> +		if (rc < 0)
> +			return rc;
> +	}
> +	return ret;
>  }
>  
>  static int lan78xx_read_raw_otp(struct lan78xx_net *dev, u32 offset,

Hi,

The subject prefix must be [PATCH v2] instead. I overlooked it. Should I resend it?

Regards,
Bhanu Seshu Kumar Valluri

Re: [PATCH] net: usb: lan78xx: Fix lost EEPROM write timeout error(-ETIMEDOUT) in lan78xx_write_raw_eeprom

[Paolo Abeni]

Hello,

On 10/9/25 7:41 AM, Bhanu Seshu Kumar Valluri wrote:
> On 09/10/25 11:00, Bhanu Seshu Kumar Valluri wrote:
>> The function lan78xx_write_raw_eeprom failed to properly propagate EEPROM
>> write timeout errors (-ETIMEDOUT). In the timeout  fallthrough path, it first
>> attempted to restore the pin configuration for LED outputs and then
>> returned only the status of that restore operation, discarding the
>> original timeout error saved in ret.
>>
>> As a result, callers could mistakenly treat EEPROM write operation as
>> successful even though the EEPROM write had actually timed out with no
>> or partial data write.
>>
>> To fix this, handle errors in restoring the LED pin configuration separately.
>> If the restore succeeds, return any prior EEPROM write timeout error saved
>> in ret to the caller.
>>
>> Suggested-by: Oleksij Rempel <o.rempel@pengutronix.de>
>> Fixes: 8b1b2ca83b20 ("net: usb: lan78xx: Improve error handling in EEPROM and OTP operations")
>> cc: stable@vger.kernel.org
>> Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com>
>> ---
>>  Note:
>>  The patch is compiled and tested using EVB-LAN7800LC.
>>  The patch was suggested by Oleksij Rempel while reviewing a fix to a bug
>>  found by syzbot earlier.
>>  The review mail chain where this fix was suggested is given below.
>>  https://lore.kernel.org/all/aNzojoXK-m1Tn6Lc@pengutronix.de/
>>
>>  ChangeLog:
>>  v1->v2:
>>   Added cc:stable tag as asked during v1 review.
>>   V1 Link : https://lore.kernel.org/all/20251004040722.82882-1-bhanuseshukumar@gmail.com/
>>
>>  drivers/net/usb/lan78xx.c | 11 +++++++----
>>  1 file changed, 7 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
>> index d75502ebbc0d..5ccbe6ae2ebe 100644
>> --- a/drivers/net/usb/lan78xx.c
>> +++ b/drivers/net/usb/lan78xx.c
>> @@ -1174,10 +1174,13 @@ static int lan78xx_write_raw_eeprom(struct lan78xx_net *dev, u32 offset,
>>  	}
>>  
>>  write_raw_eeprom_done:
>> -	if (dev->chipid == ID_REV_CHIP_ID_7800_)
>> -		return lan78xx_write_reg(dev, HW_CFG, saved);
>> -
>> -	return 0;
>> +	if (dev->chipid == ID_REV_CHIP_ID_7800_) {
>> +		int rc = lan78xx_write_reg(dev, HW_CFG, saved);
>> +		/* If USB fails, there is nothing to do */
>> +		if (rc < 0)
>> +			return rc;
>> +	}
>> +	return ret;
>>  }
>>  
>>  static int lan78xx_read_raw_otp(struct lan78xx_net *dev, u32 offset,
> 
> Hi,
> 
> The subject prefix must be [PATCH v2] instead. I overlooked it. Should I resend it?

This is not a review, and given the current amount of queued patches a
real one will not follow soon, but please do not send a new version just
for this.

Thanks,

Paolo

Re: [PATCH] net: usb: lan78xx: Fix lost EEPROM write timeout error(-ETIMEDOUT) in lan78xx_write_raw_eeprom

[Simon Horman]

On Thu, Oct 09, 2025 at 11:00:09AM +0530, Bhanu Seshu Kumar Valluri wrote:
> The function lan78xx_write_raw_eeprom failed to properly propagate EEPROM
> write timeout errors (-ETIMEDOUT). In the timeout  fallthrough path, it first
> attempted to restore the pin configuration for LED outputs and then
> returned only the status of that restore operation, discarding the
> original timeout error saved in ret.
> 
> As a result, callers could mistakenly treat EEPROM write operation as
> successful even though the EEPROM write had actually timed out with no
> or partial data write.
> 
> To fix this, handle errors in restoring the LED pin configuration separately.
> If the restore succeeds, return any prior EEPROM write timeout error saved
> in ret to the caller.
> 
> Suggested-by: Oleksij Rempel <o.rempel@pengutronix.de>
> Fixes: 8b1b2ca83b20 ("net: usb: lan78xx: Improve error handling in EEPROM and OTP operations")
> cc: stable@vger.kernel.org
> Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com>
> ---
>  Note:
>  The patch is compiled and tested using EVB-LAN7800LC.
>  The patch was suggested by Oleksij Rempel while reviewing a fix to a bug
>  found by syzbot earlier.
>  The review mail chain where this fix was suggested is given below.
>  https://lore.kernel.org/all/aNzojoXK-m1Tn6Lc@pengutronix.de/
> 
>  ChangeLog:
>  v1->v2:
>   Added cc:stable tag as asked during v1 review.
>   V1 Link : https://lore.kernel.org/all/20251004040722.82882-1-bhanuseshukumar@gmail.com/

Thanks,

This patch seems consistent with the discussion at the link under Note.
I believe it addresses the review of v1.
And that the Fixes tag corresponds to the commit that introduced this problem.

Reviewed-by: Simon Horman <horms@kernel.org>

Re: [PATCH] net: usb: lan78xx: Fix lost EEPROM write timeout error(-ETIMEDOUT) in lan78xx_write_raw_eeprom

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net.git (main)
by David S. Miller <davem@davemloft.net>:

On Thu,  9 Oct 2025 11:00:09 +0530 you wrote:
> The function lan78xx_write_raw_eeprom failed to properly propagate EEPROM
> write timeout errors (-ETIMEDOUT). In the timeout  fallthrough path, it first
> attempted to restore the pin configuration for LED outputs and then
> returned only the status of that restore operation, discarding the
> original timeout error saved in ret.
> 
> As a result, callers could mistakenly treat EEPROM write operation as
> successful even though the EEPROM write had actually timed out with no
> or partial data write.
> 
> [...]

Here is the summary with links:
  - net: usb: lan78xx: Fix lost EEPROM write timeout error(-ETIMEDOUT) in lan78xx_write_raw_eeprom
    https://git.kernel.org/netdev/net/c/d5d790ba1558

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

[PATCH] net: usb: lan78xx: Fix lost EEPROM write timeout error(-ETIMEDOUT) in lan78xx_write_raw_eeprom

[Bhanu Seshu Kumar Valluri]

The function lan78xx_write_raw_eeprom failed to properly propagate EEPROM
write timeout errors (-ETIMEDOUT). In the timeout  fallthrough path, it first
attempted to restore the pin configuration for LED outputs and then
returned only the status of that restore operation, discarding the
original timeout error saved in ret.

As a result, callers could mistakenly treat EEPROM write operation as
successful even though the EEPROM write had actually timed out with no
or partial data write.

To fix this, handle errors in restoring the LED pin configuration separately.
If the restore succeeds, return any prior EEPROM write timeout error saved
in ret to the caller.

Suggested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Fixes: 8b1b2ca83b20 ("net: usb: lan78xx: Improve error handling in EEPROM and OTP operations")
Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com>
---
 Note:
 The patch is compiled and tested.
 The patch was suggested by Oleksij Rempel while reviewing a fix to a bug
 found by syzbot earlier.
 The review mail chain where this fix was suggested is given below.
 https://lore.kernel.org/all/aNzojoXK-m1Tn6Lc@pengutronix.de/

 drivers/net/usb/lan78xx.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index d75502ebbc0d..5ccbe6ae2ebe 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -1174,10 +1174,13 @@ static int lan78xx_write_raw_eeprom(struct lan78xx_net *dev, u32 offset,
 	}
 
 write_raw_eeprom_done:
-	if (dev->chipid == ID_REV_CHIP_ID_7800_)
-		return lan78xx_write_reg(dev, HW_CFG, saved);
-
-	return 0;
+	if (dev->chipid == ID_REV_CHIP_ID_7800_) {
+		int rc = lan78xx_write_reg(dev, HW_CFG, saved);
+		/* If USB fails, there is nothing to do */
+		if (rc < 0)
+			return rc;
+	}
+	return ret;
 }
 
 static int lan78xx_read_raw_otp(struct lan78xx_net *dev, u32 offset,
-- 
2.34.1

Re: [PATCH] net: usb: lan78xx: Fix lost EEPROM write timeout error(-ETIMEDOUT) in lan78xx_write_raw_eeprom

[Greg KH]

On Sat, Oct 04, 2025 at 09:37:22AM +0530, Bhanu Seshu Kumar Valluri wrote:
> The function lan78xx_write_raw_eeprom failed to properly propagate EEPROM
> write timeout errors (-ETIMEDOUT). In the timeout  fallthrough path, it first
> attempted to restore the pin configuration for LED outputs and then
> returned only the status of that restore operation, discarding the
> original timeout error saved in ret.
> 
> As a result, callers could mistakenly treat EEPROM write operation as
> successful even though the EEPROM write had actually timed out with no
> or partial data write.
> 
> To fix this, handle errors in restoring the LED pin configuration separately.
> If the restore succeeds, return any prior EEPROM write timeout error saved
> in ret to the caller.
> 
> Suggested-by: Oleksij Rempel <o.rempel@pengutronix.de>
> Fixes: 8b1b2ca83b20 ("net: usb: lan78xx: Improve error handling in EEPROM and OTP operations")
> Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com>
> ---
>  Note:
>  The patch is compiled and tested.
>  The patch was suggested by Oleksij Rempel while reviewing a fix to a bug
>  found by syzbot earlier.
>  The review mail chain where this fix was suggested is given below.
>  https://lore.kernel.org/all/aNzojoXK-m1Tn6Lc@pengutronix.de/
> 
>  drivers/net/usb/lan78xx.c | 11 +++++++----
>  1 file changed, 7 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
> index d75502ebbc0d..5ccbe6ae2ebe 100644
> --- a/drivers/net/usb/lan78xx.c
> +++ b/drivers/net/usb/lan78xx.c
> @@ -1174,10 +1174,13 @@ static int lan78xx_write_raw_eeprom(struct lan78xx_net *dev, u32 offset,
>  	}
>  
>  write_raw_eeprom_done:
> -	if (dev->chipid == ID_REV_CHIP_ID_7800_)
> -		return lan78xx_write_reg(dev, HW_CFG, saved);
> -
> -	return 0;
> +	if (dev->chipid == ID_REV_CHIP_ID_7800_) {
> +		int rc = lan78xx_write_reg(dev, HW_CFG, saved);
> +		/* If USB fails, there is nothing to do */
> +		if (rc < 0)
> +			return rc;
> +	}
> +	return ret;
>  }
>  
>  static int lan78xx_read_raw_otp(struct lan78xx_net *dev, u32 offset,
> -- 
> 2.34.1
> 
> 

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- You have marked a patch with a "Fixes:" tag for a commit that is in an
  older released kernel, yet you do not have a cc: stable line in the
  signed-off-by area at all, which means that the patch will not be
  applied to any older kernel releases.  To properly fix this, please
  follow the documented rules in the
  Documentation/process/stable-kernel-rules.rst file for how to resolve
  this.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot

Re: [PATCH] net: usb: lan78xx: Fix lost EEPROM write timeout error(-ETIMEDOUT) in lan78xx_write_raw_eeprom

[Bhanu Seshu Kumar Valluri]

On 04/10/25 11:21, Greg KH wrote:
> Hi,
> 
> This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
> a patch that has triggered this response.  He used to manually respond
> to these common problems, but in order to save his sanity (he kept
> writing the same thing over and over, yet to different people), I was
> created.  Hopefully you will not take offence and will fix the problem
> in your patch and resubmit it so that it can be accepted into the Linux
> kernel tree.
> 
> You are receiving this message because of the following common error(s)
> as indicated below:
> 
> - You have marked a patch with a "Fixes:" tag for a commit that is in an
>   older released kernel, yet you do not have a cc: stable line in the
>   signed-off-by area at all, which means that the patch will not be
>   applied to any older kernel releases.  To properly fix this, please
>   follow the documented rules in the
>   Documentation/process/stable-kernel-rules.rst file for how to resolve
>   this.
> 

Hi,

Sent a v2 with cc: stable tag.
v2 Link https://lore.kernel.org/all/20251009053009.5427-1-bhanuseshukumar@gmail.com/

Regards,
Bhanu Seshu Kumar Valluri

Re: [PATCH] net: usb: lan78xx: Fix lost EEPROM write timeout error(-ETIMEDOUT) in lan78xx_write_raw_eeprom

[Khalid Aziz]

On 10/3/25 10:07 PM, Bhanu Seshu Kumar Valluri wrote:
> The function lan78xx_write_raw_eeprom failed to properly propagate EEPROM
> write timeout errors (-ETIMEDOUT). In the timeout  fallthrough path, it first
> attempted to restore the pin configuration for LED outputs and then
> returned only the status of that restore operation, discarding the
> original timeout error saved in ret.
> 
> As a result, callers could mistakenly treat EEPROM write operation as
> successful even though the EEPROM write had actually timed out with no
> or partial data write.
> 
> To fix this, handle errors in restoring the LED pin configuration separately.
> If the restore succeeds, return any prior EEPROM write timeout error saved
> in ret to the caller.
> 
> Suggested-by: Oleksij Rempel <o.rempel@pengutronix.de>
> Fixes: 8b1b2ca83b20 ("net: usb: lan78xx: Improve error handling in EEPROM and OTP operations")
> Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com>
> ---
>   Note:
>   The patch is compiled and tested.
>   The patch was suggested by Oleksij Rempel while reviewing a fix to a bug
>   found by syzbot earlier.
>   The review mail chain where this fix was suggested is given below.
>   https://lore.kernel.org/all/aNzojoXK-m1Tn6Lc@pengutronix.de/
> 
>   drivers/net/usb/lan78xx.c | 11 +++++++----
>   1 file changed, 7 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
> index d75502ebbc0d..5ccbe6ae2ebe 100644
> --- a/drivers/net/usb/lan78xx.c
> +++ b/drivers/net/usb/lan78xx.c
> @@ -1174,10 +1174,13 @@ static int lan78xx_write_raw_eeprom(struct lan78xx_net *dev, u32 offset,
>   	}
>   
>   write_raw_eeprom_done:
> -	if (dev->chipid == ID_REV_CHIP_ID_7800_)
> -		return lan78xx_write_reg(dev, HW_CFG, saved);
> -
> -	return 0;
> +	if (dev->chipid == ID_REV_CHIP_ID_7800_) {
> +		int rc = lan78xx_write_reg(dev, HW_CFG, saved);
> +		/* If USB fails, there is nothing to do */
> +		if (rc < 0)
> +			return rc;
> +	}
> +	return ret;
>   }
>   
>   static int lan78xx_read_raw_otp(struct lan78xx_net *dev, u32 offset,

You were able to test the change to read eeprom code by forcing a 
timeout while doing probe on EVB-LAN7800LC. Were you able to test this 
code change the same way just to make sure callers of the write function 
handle the new ETIMEDOUT return value correctly?

Thanks,
Khalid

Re: [PATCH] net: usb: lan78xx: Fix lost EEPROM write timeout error(-ETIMEDOUT) in lan78xx_write_raw_eeprom

[Bhanu Seshu Kumar Valluri]

On 07/10/25 00:30, Khalid Aziz wrote:
> On 10/3/25 10:07 PM, Bhanu Seshu Kumar Valluri wrote:
>> The function lan78xx_write_raw_eeprom failed to properly propagate EEPROM
>> write timeout errors (-ETIMEDOUT). In the timeout  fallthrough path, it first
>> attempted to restore the pin configuration for LED outputs and then
>> returned only the status of that restore operation, discarding the
>> original timeout error saved in ret.
>>
>> As a result, callers could mistakenly treat EEPROM write operation as
>> successful even though the EEPROM write had actually timed out with no
>> or partial data write.
>>
>> To fix this, handle errors in restoring the LED pin configuration separately.
>> If the restore succeeds, return any prior EEPROM write timeout error saved
>> in ret to the caller.
>>
>> Suggested-by: Oleksij Rempel <o.rempel@pengutronix.de>
>> Fixes: 8b1b2ca83b20 ("net: usb: lan78xx: Improve error handling in EEPROM and OTP operations")
>> Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com>
>> ---
>>   Note:
>>   The patch is compiled and tested.
>>   The patch was suggested by Oleksij Rempel while reviewing a fix to a bug
>>   found by syzbot earlier.
>>   The review mail chain where this fix was suggested is given below.
>>   https://lore.kernel.org/all/aNzojoXK-m1Tn6Lc@pengutronix.de/
>>
>>   drivers/net/usb/lan78xx.c | 11 +++++++----
>>   1 file changed, 7 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
>> index d75502ebbc0d..5ccbe6ae2ebe 100644
>> --- a/drivers/net/usb/lan78xx.c
>> +++ b/drivers/net/usb/lan78xx.c
>> @@ -1174,10 +1174,13 @@ static int lan78xx_write_raw_eeprom(struct lan78xx_net *dev, u32 offset,
>>       }
>>     write_raw_eeprom_done:
>> -    if (dev->chipid == ID_REV_CHIP_ID_7800_)
>> -        return lan78xx_write_reg(dev, HW_CFG, saved);
>> -
>> -    return 0;
>> +    if (dev->chipid == ID_REV_CHIP_ID_7800_) {
>> +        int rc = lan78xx_write_reg(dev, HW_CFG, saved);
>> +        /* If USB fails, there is nothing to do */
>> +        if (rc < 0)
>> +            return rc;
>> +    }
>> +    return ret;
>>   }
>>     static int lan78xx_read_raw_otp(struct lan78xx_net *dev, u32 offset,
> 
> You were able to test the change to read eeprom code by forcing a timeout while doing probe on EVB-LAN7800LC. Were you able to test this code change the same way just to make sure callers of the write function handle the new ETIMEDOUT return value correctly?
> 
> Thanks,

Hi Khalid,

This function is only invoked from user's ethtool operations.  The ethtool handles errors returned from the driver callback functions. 
I tested it with ethtool -E option by forcing a ETIMEDOUT error early in the lan78xx_write_raw_eeprom temporarily. The ethtool 
reported error with "Cannot set EEPROM data" message. The ethtool version used is 5.16.

Regards,
Bhanu Seshu Kumar Valluri