From: Buday Csaba <buday.csaba@prolan.hu>
To: Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: Buday Csaba <buday.csaba@prolan.hu>
Subject: [PATCH 1/2] net: mdio: common handling of phy reset properties
Date: Mon, 13 Oct 2025 15:55:56 +0200 [thread overview]
Message-ID: <20251013135557.62949-1-buday.csaba@prolan.hu> (raw)
Reset properties of an `mdio_device` are initialized in multiple
source files and multiple functions:
- `reset_assert_delay` and `reset_deassert_delay` are in
fwnode_mdio.c
- `reset_gpio` and `reset_ctrl` are in mdio_bus.c, but handled by
different functions
This patch unifies the handling of all these properties into two
functions.
mdiobus_register_gpiod() and mdiobus_register_reset() are removed,
while mdio_device_register_reset() and mdio_device_unregister_reset()
are introduced instead.
These functions handle both reset-controllers and reset-gpios, and
also read the corresponding properties from the device tree.
These changes should make tracking the reset properties easier.
The reset logic is unaltered, and should work as it did before.
Signed-off-by: Buday Csaba <buday.csaba@prolan.hu>
---
drivers/net/mdio/fwnode_mdio.c | 5 ----
drivers/net/phy/mdio_bus.c | 39 ++-----------------------
drivers/net/phy/mdio_device.c | 52 ++++++++++++++++++++++++++++++++++
include/linux/mdio.h | 2 ++
4 files changed, 56 insertions(+), 42 deletions(-)
diff --git a/drivers/net/mdio/fwnode_mdio.c b/drivers/net/mdio/fwnode_mdio.c
index 9b41d4697..ba7091518 100644
--- a/drivers/net/mdio/fwnode_mdio.c
+++ b/drivers/net/mdio/fwnode_mdio.c
@@ -92,11 +92,6 @@ int fwnode_mdiobus_phy_device_register(struct mii_bus *mdio,
if (fwnode_property_read_bool(child, "broken-turn-around"))
mdio->phy_ignore_ta_mask |= 1 << addr;
- fwnode_property_read_u32(child, "reset-assert-us",
- &phy->mdio.reset_assert_delay);
- fwnode_property_read_u32(child, "reset-deassert-us",
- &phy->mdio.reset_deassert_delay);
-
/* Associate the fwnode with the device structure so it
* can be looked up later
*/
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index cad6ed3aa..cc3f9cfb1 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -33,33 +33,6 @@
#define CREATE_TRACE_POINTS
#include <trace/events/mdio.h>
-static int mdiobus_register_gpiod(struct mdio_device *mdiodev)
-{
- /* Deassert the optional reset signal */
- mdiodev->reset_gpio = gpiod_get_optional(&mdiodev->dev,
- "reset", GPIOD_OUT_LOW);
- if (IS_ERR(mdiodev->reset_gpio))
- return PTR_ERR(mdiodev->reset_gpio);
-
- if (mdiodev->reset_gpio)
- gpiod_set_consumer_name(mdiodev->reset_gpio, "PHY reset");
-
- return 0;
-}
-
-static int mdiobus_register_reset(struct mdio_device *mdiodev)
-{
- struct reset_control *reset;
-
- reset = reset_control_get_optional_exclusive(&mdiodev->dev, "phy");
- if (IS_ERR(reset))
- return PTR_ERR(reset);
-
- mdiodev->reset_ctrl = reset;
-
- return 0;
-}
-
int mdiobus_register_device(struct mdio_device *mdiodev)
{
int err;
@@ -68,16 +41,9 @@ int mdiobus_register_device(struct mdio_device *mdiodev)
return -EBUSY;
if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY) {
- err = mdiobus_register_gpiod(mdiodev);
+ err = mdio_device_register_reset(mdiodev);
if (err)
return err;
-
- err = mdiobus_register_reset(mdiodev);
- if (err)
- return err;
-
- /* Assert the reset signal */
- mdio_device_reset(mdiodev, 1);
}
mdiodev->bus->mdio_map[mdiodev->addr] = mdiodev;
@@ -91,8 +57,7 @@ int mdiobus_unregister_device(struct mdio_device *mdiodev)
if (mdiodev->bus->mdio_map[mdiodev->addr] != mdiodev)
return -EINVAL;
- gpiod_put(mdiodev->reset_gpio);
- reset_control_put(mdiodev->reset_ctrl);
+ mdio_device_unregister_reset(mdiodev);
mdiodev->bus->mdio_map[mdiodev->addr] = NULL;
diff --git a/drivers/net/phy/mdio_device.c b/drivers/net/phy/mdio_device.c
index f64176e0e..e72bfa5a7 100644
--- a/drivers/net/phy/mdio_device.c
+++ b/drivers/net/phy/mdio_device.c
@@ -74,6 +74,58 @@ struct mdio_device *mdio_device_create(struct mii_bus *bus, int addr)
}
EXPORT_SYMBOL(mdio_device_create);
+/**
+ * mdio_device_register_reset - Read and initialize the reset properties of
+ * an mdio device
+ * @mdiodev: mdio_device structure
+ */
+int mdio_device_register_reset(struct mdio_device *mdiodev)
+{
+ struct reset_control *reset;
+
+ /* Read optional firmware properties */
+ fwnode_property_read_u32(dev_fwnode(&mdiodev->dev), "reset-assert-us",
+ &mdiodev->reset_assert_delay);
+ fwnode_property_read_u32(dev_fwnode(&mdiodev->dev), "reset-deassert-us",
+ &mdiodev->reset_deassert_delay);
+
+ /* reset-gpio, bring up deasserted */
+ mdiodev->reset_gpio = gpiod_get_optional(&mdiodev->dev, "reset",
+ GPIOD_OUT_LOW);
+
+ if (IS_ERR(mdiodev->reset_gpio))
+ return PTR_ERR(mdiodev->reset_gpio);
+
+ if (mdiodev->reset_gpio)
+ gpiod_set_consumer_name(mdiodev->reset_gpio, "PHY reset");
+
+ reset = reset_control_get_optional_exclusive(&mdiodev->dev, "phy");
+ if (IS_ERR(reset))
+ return PTR_ERR(reset);
+
+ mdiodev->reset_ctrl = reset;
+
+ /* Assert the reset signal */
+ mdio_device_reset(mdiodev, 1);
+
+ return 0;
+}
+EXPORT_SYMBOL(mdio_device_register_reset);
+
+/**
+ * mdio_device_unregister_reset - uninitialize the reset properties of
+ * an mdio device
+ * @mdiodev: mdio_device structure
+ */
+int mdio_device_unregister_reset(struct mdio_device *mdiodev)
+{
+ gpiod_put(mdiodev->reset_gpio);
+ reset_control_put(mdiodev->reset_ctrl);
+
+ return 0;
+}
+EXPORT_SYMBOL(mdio_device_unregister_reset);
+
/**
* mdio_device_register - Register the mdio device on the MDIO bus
* @mdiodev: mdio_device structure to be added to the MDIO bus
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index c640ba44d..e6023cf13 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -90,6 +90,8 @@ static inline void *mdiodev_get_drvdata(struct mdio_device *mdio)
void mdio_device_free(struct mdio_device *mdiodev);
struct mdio_device *mdio_device_create(struct mii_bus *bus, int addr);
+int mdio_device_register_reset(struct mdio_device *mdiodev);
+int mdio_device_unregister_reset(struct mdio_device *mdiodev);
int mdio_device_register(struct mdio_device *mdiodev);
void mdio_device_remove(struct mdio_device *mdiodev);
void mdio_device_reset(struct mdio_device *mdiodev, int value);
--
2.39.5
next reply other threads:[~2025-10-13 14:05 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-13 13:55 Buday Csaba [this message]
2025-10-13 13:55 ` [PATCH 2/2] net: mdio: reset PHY before attempting to access registers in fwnode_mdiobus_register_phy Buday Csaba
2025-10-13 14:31 ` Maxime Chevallier
2025-10-15 9:07 ` Buday Csaba
2025-10-15 9:48 ` Russell King (Oracle)
2025-10-13 14:13 ` [PATCH 1/2] net: mdio: common handling of phy reset properties Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251013135557.62949-1-buday.csaba@prolan.hu \
--to=buday.csaba@prolan.hu \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).