From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: "Rob Herring (Arm)" <robh@kernel.org>
Cc: "Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Stephen Boyd" <sboyd@kernel.org>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Bartosz Golaszewski" <brgl@bgdev.pl>,
"Shawn Guo" <shawnguo@kernel.org>,
"Fabio Estevam" <festevam@gmail.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Lars-Peter Clausen" <lars@metafoo.de>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"Andy Shevchenko" <andy@kernel.org>,
"Jassi Brar" <jassisinghbrar@gmail.com>,
"Mauro Carvalho Chehab" <mchehab@kernel.org>,
"Lee Jones" <lee@kernel.org>, "Joel Stanley" <joel@jms.id.au>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Andrew Lunn" <andrew@lunn.ch>,
"Vladimir Oltean" <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
"Eric Dumazet" <edumazet@google.com>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"Daire McNamara" <daire.mcnamara@microchip.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Vinod Koul" <vkoul@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Bjorn Andersson" <andersson@kernel.org>,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
"Nicolas Ferre" <nicolas.ferre@microchip.com>,
"Claudiu Beznea" <claudiu.beznea@tuxon.dev>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Tony Lindgren" <tony@atomide.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-iio@vger.kernel.org,
linux-media@vger.kernel.org, netdev@vger.kernel.org,
linux-pci@vger.kernel.org, linux-phy@lists.infradead.org
Subject: Re: [PATCH] dt-bindings: Fix inconsistent quoting
Date: Thu, 16 Oct 2025 08:49:13 +0200 [thread overview]
Message-ID: <2025101606491337a4fffe@mail.local> (raw)
In-Reply-To: <20251015232015.846282-1-robh@kernel.org>
On 15/10/2025 18:16:24-0500, Rob Herring (Arm) wrote:
> yamllint has gained a new check which checks for inconsistent quoting
> (mixed " and ' quotes within a file). Fix all the cases yamllint found
> so we can enable the check (once the check is in a release). Use
> whichever quoting is dominate in the file.
>
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> ---
> .../arm/altera/socfpga-clk-manager.yaml | 4 ++--
> .../bindings/clock/nvidia,tegra124-car.yaml | 8 ++++----
> .../bindings/clock/nvidia,tegra20-car.yaml | 6 +++---
> .../devicetree/bindings/gpio/gpio-mxs.yaml | 9 +++++----
> .../bindings/gpio/snps,dw-apb-gpio.yaml | 4 ++--
> .../bindings/iio/temperature/adi,ltc2983.yaml | 20 +++++++++----------
> .../mailbox/qcom,apcs-kpss-global.yaml | 16 +++++++--------
> .../mailbox/xlnx,zynqmp-ipi-mailbox.yaml | 2 +-
> .../bindings/media/fsl,imx6q-vdoa.yaml | 2 +-
> .../devicetree/bindings/mfd/aspeed-lpc.yaml | 4 ++--
> .../devicetree/bindings/mfd/ti,twl.yaml | 4 ++--
> .../bindings/net/ethernet-switch.yaml | 2 +-
> .../pci/plda,xpressrich3-axi-common.yaml | 2 +-
> .../bindings/phy/motorola,cpcap-usb-phy.yaml | 4 ++--
> .../pinctrl/microchip,sparx5-sgpio.yaml | 12 +++++------
> .../bindings/pinctrl/qcom,pmic-gpio.yaml | 10 +++++-----
> .../bindings/pinctrl/qcom,pmic-mpp.yaml | 6 +++---
> .../bindings/pinctrl/renesas,pfc.yaml | 4 ++--
> .../bindings/pinctrl/renesas,rza1-ports.yaml | 2 +-
> .../pinctrl/renesas,rzg2l-pinctrl.yaml | 2 +-
> .../pinctrl/renesas,rzv2m-pinctrl.yaml | 2 +-
> .../bindings/power/renesas,sysc-rmobile.yaml | 4 ++--
> .../soc/microchip/atmel,at91rm9200-tcb.yaml | 8 ++++----
> .../soc/tegra/nvidia,tegra20-pmc.yaml | 12 +++++------
> 24 files changed, 75 insertions(+), 74 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
> index a758f4bb2bb3..275554bfedce 100644
> --- a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
> +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
> @@ -39,7 +39,7 @@ properties:
>
> "^[a-z0-9,_]+(clk|pll|clk_gate|clk_divided)(@[a-f0-9]+)?$":
> type: object
> - $ref: '#/$defs/clock-props'
> + $ref: "#/$defs/clock-props"
> unevaluatedProperties: false
>
> properties:
> @@ -67,7 +67,7 @@ properties:
> patternProperties:
> "^[a-z0-9,_]+(clk|pll)(@[a-f0-9]+)?$":
> type: object
> - $ref: '#/$defs/clock-props'
> + $ref: "#/$defs/clock-props"
> unevaluatedProperties: false
>
> properties:
> diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
> index a9ba21144a56..13bb616249a1 100644
> --- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
> +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
> @@ -37,7 +37,7 @@ properties:
> '#clock-cells':
> const: 1
>
> - "#reset-cells":
> + '#reset-cells':
> const: 1
>
> nvidia,external-memory-controller:
> @@ -46,7 +46,7 @@ properties:
> phandle of the external memory controller node
>
> patternProperties:
> - "^emc-timings-[0-9]+$":
> + '^emc-timings-[0-9]+$':
> type: object
> properties:
> nvidia,ram-code:
> @@ -56,7 +56,7 @@ patternProperties:
> this timing set is used for
>
> patternProperties:
> - "^timing-[0-9]+$":
> + '^timing-[0-9]+$':
> type: object
> properties:
> clock-frequency:
> @@ -94,7 +94,7 @@ required:
> - compatible
> - reg
> - '#clock-cells'
> - - "#reset-cells"
> + - '#reset-cells'
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
> index bee2dd4b29bf..73cccc0df424 100644
> --- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
> +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
> @@ -39,11 +39,11 @@ properties:
> '#clock-cells':
> const: 1
>
> - "#reset-cells":
> + '#reset-cells':
> const: 1
>
> patternProperties:
> - "^(sclk)|(pll-[cem])$":
> + '^(sclk)|(pll-[cem])$':
> type: object
> properties:
> compatible:
> @@ -76,7 +76,7 @@ required:
> - compatible
> - reg
> - '#clock-cells'
> - - "#reset-cells"
> + - '#reset-cells'
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
> index aaf97124803f..4b5b8e794613 100644
> --- a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
> +++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
> @@ -26,9 +26,10 @@ properties:
> # Devices. Keep it as it to be compatible existed dts files.
> - const: simple-bus
>
> - '#address-cells':
> + "#address-cells":
> const: 1
> - '#size-cells':
> +
> + "#size-cells":
> const: 0
>
> reg:
> @@ -132,8 +133,8 @@ patternProperties:
> required:
> - compatible
> - reg
> - - '#address-cells'
> - - '#size-cells'
> + - "#address-cells"
> + - "#size-cells"
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
> index ab2afc0e4153..bba6f5b6606f 100644
> --- a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
> @@ -111,8 +111,8 @@ additionalProperties: false
> required:
> - compatible
> - reg
> - - "#address-cells"
> - - "#size-cells"
> + - '#address-cells'
> + - '#size-cells'
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> index 312febeeb3bb..ee0b558bb866 100644
> --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> @@ -88,7 +88,7 @@ properties:
> const: 0
>
> patternProperties:
> - "^thermocouple@":
> + '^thermocouple@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
>
> @@ -146,7 +146,7 @@ patternProperties:
> required:
> - adi,custom-thermocouple
>
> - "^diode@":
> + '^diode@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
>
> @@ -191,7 +191,7 @@ patternProperties:
> $ref: /schemas/types.yaml#/definitions/uint32
> default: 0
>
> - "^rtd@":
> + '^rtd@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
> description: RTD sensor.
> @@ -280,7 +280,7 @@ patternProperties:
> type: boolean
>
> dependencies:
> - adi,current-rotate: [ "adi,rsense-share" ]
> + adi,current-rotate: [ 'adi,rsense-share' ]
>
> - if:
> properties:
> @@ -290,7 +290,7 @@ patternProperties:
> required:
> - adi,custom-rtd
>
> - "^thermistor@":
> + '^thermistor@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
> description: Thermistor sensor.
> @@ -364,7 +364,7 @@ patternProperties:
> - adi,rsense-handle
>
> dependencies:
> - adi,current-rotate: [ "adi,rsense-share" ]
> + adi,current-rotate: [ 'adi,rsense-share' ]
>
> allOf:
> - if:
> @@ -392,7 +392,7 @@ patternProperties:
> required:
> - adi,custom-thermistor
>
> - "^adc@":
> + '^adc@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
> description: Direct ADC sensor.
> @@ -407,7 +407,7 @@ patternProperties:
> description: Whether the sensor is single-ended.
> type: boolean
>
> - "^temp@":
> + '^temp@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
> description: Active analog temperature sensor.
> @@ -437,7 +437,7 @@ patternProperties:
> required:
> - adi,custom-temp
>
> - "^rsense@":
> + '^rsense@':
> $ref: '#/$defs/sensor-node'
> unevaluatedProperties: false
> description: Sense resistor sensor.
> @@ -476,7 +476,7 @@ allOf:
> - adi,ltc2984
> then:
> patternProperties:
> - "^temp@": false
> + '^temp@': false
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
> index 615ed103b7e6..f40dc9048327 100644
> --- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
> +++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
> @@ -187,10 +187,10 @@ allOf:
> enum:
> - qcom,msm8916-apcs-kpss-global
> then:
> - $ref: "#/$defs/msm8916-apcs-clock-controller"
> + $ref: '#/$defs/msm8916-apcs-clock-controller'
> properties:
> clock-controller:
> - $ref: "#/$defs/msm8916-apcs-clock-controller"
> + $ref: '#/$defs/msm8916-apcs-clock-controller'
>
> - if:
> properties:
> @@ -199,10 +199,10 @@ allOf:
> enum:
> - qcom,msm8939-apcs-kpss-global
> then:
> - $ref: "#/$defs/msm8939-apcs-clock-controller"
> + $ref: '#/$defs/msm8939-apcs-clock-controller'
> properties:
> clock-controller:
> - $ref: "#/$defs/msm8939-apcs-clock-controller"
> + $ref: '#/$defs/msm8939-apcs-clock-controller'
>
> - if:
> properties:
> @@ -211,10 +211,10 @@ allOf:
> enum:
> - qcom,sdx55-apcs-gcc
> then:
> - $ref: "#/$defs/sdx55-apcs-clock-controller"
> + $ref: '#/$defs/sdx55-apcs-clock-controller'
> properties:
> clock-controller:
> - $ref: "#/$defs/sdx55-apcs-clock-controller"
> + $ref: '#/$defs/sdx55-apcs-clock-controller'
>
> - if:
> properties:
> @@ -223,10 +223,10 @@ allOf:
> enum:
> - qcom,ipq6018-apcs-apps-global
> then:
> - $ref: "#/$defs/ipq6018-apcs-clock-controller"
> + $ref: '#/$defs/ipq6018-apcs-clock-controller'
> properties:
> clock-controller:
> - $ref: "#/$defs/ipq6018-apcs-clock-controller"
> + $ref: '#/$defs/ipq6018-apcs-clock-controller'
>
> - if:
> properties:
> diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
> index fe83b5cb1278..04d6473d666f 100644
> --- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
> +++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
> @@ -142,7 +142,7 @@ patternProperties:
> - compatible
> - reg
> - reg-names
> - - "#mbox-cells"
> + - '#mbox-cells'
> - xlnx,ipi-id
>
> required:
> diff --git a/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml b/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml
> index 511ac0d67a7f..988a5b3a62bd 100644
> --- a/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml
> +++ b/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml
> @@ -16,7 +16,7 @@ maintainers:
>
> properties:
> compatible:
> - const: "fsl,imx6q-vdoa"
> + const: fsl,imx6q-vdoa
>
> reg:
> maxItems: 1
> diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
> index f329223cec07..0adfeef149e7 100644
> --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
> +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
> @@ -111,12 +111,12 @@ patternProperties:
> reg:
> maxItems: 1
>
> - '#reset-cells':
> + "#reset-cells":
> const: 1
>
> required:
> - compatible
> - - '#reset-cells'
> + - "#reset-cells"
>
> "^lpc-snoop@[0-9a-f]+$":
> type: object
> diff --git a/Documentation/devicetree/bindings/mfd/ti,twl.yaml b/Documentation/devicetree/bindings/mfd/ti,twl.yaml
> index 776b04e182cb..1611b1581a8e 100644
> --- a/Documentation/devicetree/bindings/mfd/ti,twl.yaml
> +++ b/Documentation/devicetree/bindings/mfd/ti,twl.yaml
> @@ -400,7 +400,7 @@ properties:
> - '#pwm-cells'
>
> patternProperties:
> - "^regulator-":
> + '^regulator-':
> type: object
> unevaluatedProperties: false
> $ref: /schemas/regulator/regulator.yaml
> @@ -429,7 +429,7 @@ required:
> - reg
> - interrupts
> - interrupt-controller
> - - "#interrupt-cells"
> + - '#interrupt-cells'
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
> index b3b7e1a1b127..03001ba40e0f 100644
> --- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml
> +++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
> @@ -72,7 +72,7 @@ additionalProperties: true
> $defs:
> ethernet-ports:
> description: An ethernet switch without any extra port properties
> - $ref: '#'
> + $ref: "#"
>
> patternProperties:
> "^(ethernet-)?ports$":
> diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
> index 039eecdbd6aa..fe2e8beb5bab 100644
> --- a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
> +++ b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
> @@ -72,7 +72,7 @@ required:
> - reg-names
> - interrupts
> - msi-controller
> - - "#interrupt-cells"
> + - '#interrupt-cells'
> - interrupt-map-mask
> - interrupt-map
>
> diff --git a/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml b/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
> index 0febd04a61f4..dd345cbd0a0b 100644
> --- a/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
> @@ -67,8 +67,8 @@ properties:
> mode-gpios:
> description: Optional GPIOs for configuring alternate modes
> items:
> - - description: "mode selection GPIO #0"
> - - description: "mode selection GPIO #1"
> + - description: mode selection GPIO#0
> + - description: mode selection GPIO#1
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
> index 0df4e114fdd6..fa47732d7cef 100644
> --- a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
> @@ -18,7 +18,7 @@ description: |
>
> properties:
> $nodename:
> - pattern: "^gpio@[0-9a-f]+$"
> + pattern: '^gpio@[0-9a-f]+$'
>
> compatible:
> enum:
> @@ -26,10 +26,10 @@ properties:
> - mscc,ocelot-sgpio
> - mscc,luton-sgpio
>
> - "#address-cells":
> + '#address-cells':
> const: 1
>
> - "#size-cells":
> + '#size-cells':
> const: 0
>
> reg:
> @@ -76,7 +76,7 @@ properties:
> - const: switch
>
> patternProperties:
> - "^gpio@[0-1]$":
> + '^gpio@[0-1]$':
> type: object
> properties:
> compatible:
> @@ -132,8 +132,8 @@ required:
> - reg
> - clocks
> - microchip,sgpio-port-ranges
> - - "#address-cells"
> - - "#size-cells"
> + - '#address-cells'
> + - '#size-cells'
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
> index 5e6dfcc3fe9b..6632bcd037ba 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
> @@ -424,13 +424,13 @@ allOf:
> patternProperties:
> '-state$':
> oneOf:
> - - $ref: "#/$defs/qcom-pmic-gpio-state"
> + - $ref: '#/$defs/qcom-pmic-gpio-state'
> - patternProperties:
> - "(pinconf|-pins)$":
> - $ref: "#/$defs/qcom-pmic-gpio-state"
> + '(pinconf|-pins)$':
> + $ref: '#/$defs/qcom-pmic-gpio-state'
> additionalProperties: false
>
> - "-hog(-[0-9]+)?$":
> + '-hog(-[0-9]+)?$':
> type: object
> required:
> - gpio-hog
> @@ -503,7 +503,7 @@ $defs:
> - gpio1-gpio12 for pmxr2230
>
> items:
> - pattern: "^gpio([0-9]+)$"
> + pattern: '^gpio([0-9]+)$'
>
> function:
> items:
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
> index 9364ae05f3e6..daf4c1c03712 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
> @@ -74,10 +74,10 @@ required:
> patternProperties:
> '-state$':
> oneOf:
> - - $ref: "#/$defs/qcom-pmic-mpp-state"
> + - $ref: '#/$defs/qcom-pmic-mpp-state'
> - patternProperties:
> '-pins$':
> - $ref: "#/$defs/qcom-pmic-mpp-state"
> + $ref: '#/$defs/qcom-pmic-mpp-state'
> additionalProperties: false
>
> $defs:
> @@ -100,7 +100,7 @@ $defs:
> - mpp1-mpp4 for pma8084
>
> items:
> - pattern: "^mpp([0-9]+)$"
> + pattern: '^mpp([0-9]+)$'
>
> function:
> items:
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
> index cfe004573366..ab1cfe9dcde5 100644
> --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
> @@ -129,7 +129,7 @@ additionalProperties:
>
> - type: object
> additionalProperties:
> - $ref: "#/additionalProperties/anyOf/0"
> + $ref: '#/additionalProperties/anyOf/0'
>
> examples:
> - |
> @@ -190,7 +190,7 @@ examples:
>
> sdhi0_pins: sd0 {
> groups = "sdhi0_data4", "sdhi0_ctrl";
> - function = "sdhi0";
> + function = "sdhi0';
> power-source = <3300>;
> };
> };
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
> index 2bd7d47d0fdb..737eb4e14090 100644
> --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
> @@ -118,7 +118,7 @@ additionalProperties:
>
> - type: object
> additionalProperties:
> - $ref: "#/additionalProperties/anyOf/0"
> + $ref: '#/additionalProperties/anyOf/0'
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
> index 5156d54b240b..00c05243b9a4 100644
> --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
> @@ -135,7 +135,7 @@ additionalProperties:
>
> - type: object
> additionalProperties:
> - $ref: "#/additionalProperties/anyOf/0"
> + $ref: '#/additionalProperties/anyOf/0'
>
> allOf:
> - $ref: pinctrl.yaml#
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
> index 5fa5d31f8866..88b2fa5e684d 100644
> --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
> @@ -88,7 +88,7 @@ additionalProperties:
>
> - type: object
> additionalProperties:
> - $ref: "#/additionalProperties/anyOf/0"
> + $ref: '#/additionalProperties/anyOf/0'
>
> allOf:
> - $ref: pinctrl.yaml#
> diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml
> index fba6914ec40d..948a9da111df 100644
> --- a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml
> +++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml
> @@ -45,7 +45,7 @@ properties:
> const: 0
>
> additionalProperties:
> - $ref: "#/$defs/pd-node"
> + $ref: '#/$defs/pd-node'
>
> required:
> - compatible
> @@ -83,7 +83,7 @@ $defs:
> - '#power-domain-cells'
>
> additionalProperties:
> - $ref: "#/$defs/pd-node"
> + $ref: '#/$defs/pd-node'
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
> index 2c7275c4503b..abf1adca0773 100644
> --- a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
> +++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
> @@ -57,7 +57,7 @@ properties:
> const: 0
>
> patternProperties:
> - "^timer@[0-2]$":
> + '^timer@[0-2]$':
> description: The timer block channels that are used as timers or counters.
> type: object
> additionalProperties: false
> @@ -80,7 +80,7 @@ patternProperties:
> - compatible
> - reg
>
> - "^pwm@[0-2]$":
> + '^pwm@[0-2]$':
> description: The timer block channels that are used as PWMs.
> $ref: /schemas/pwm/pwm.yaml#
> type: object
> @@ -92,7 +92,7 @@ patternProperties:
> TCB channel to use for this PWM.
> enum: [ 0, 1, 2 ]
>
> - "#pwm-cells":
> + '#pwm-cells':
> description:
> The only third cell flag supported by this binding is
> PWM_POLARITY_INVERTED.
> @@ -101,7 +101,7 @@ patternProperties:
> required:
> - compatible
> - reg
> - - "#pwm-cells"
> + - '#pwm-cells'
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml
> index 7140c312d898..f516960dbbef 100644
> --- a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml
> +++ b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml
> @@ -133,12 +133,12 @@ properties:
> property. The supported-hw is a bitfield indicating SoC speedo or
> process ID mask.
>
> - "#power-domain-cells":
> + '#power-domain-cells':
> const: 0
>
> required:
> - operating-points-v2
> - - "#power-domain-cells"
> + - '#power-domain-cells'
>
> i2c-thermtrip:
> type: object
> @@ -220,7 +220,7 @@ properties:
> xusbc USB Partition C Tegra114/124/210
>
> patternProperties:
> - "^[a-z0-9]+$":
> + '^[a-z0-9]+$':
> type: object
> additionalProperties: false
> properties:
> @@ -365,9 +365,9 @@ allOf:
> additionalProperties: false
>
> dependencies:
> - nvidia,suspend-mode: ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
> - nvidia,core-pwr-off-time: ["nvidia,core-pwr-good-time"]
> - nvidia,cpu-pwr-off-time: ["nvidia,cpu-pwr-good-time"]
> + nvidia,suspend-mode: ['nvidia,core-pwr-off-time', 'nvidia,cpu-pwr-off-time']
> + nvidia,core-pwr-off-time: ['nvidia,core-pwr-good-time']
> + nvidia,cpu-pwr-off-time: ['nvidia,cpu-pwr-good-time']
>
> examples:
> - |
> --
> 2.51.0
>
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next prev parent reply other threads:[~2025-10-16 6:49 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-15 23:16 [PATCH] dt-bindings: Fix inconsistent quoting Rob Herring (Arm)
2025-10-16 0:26 ` Rob Herring (Arm)
2025-10-16 6:49 ` Alexandre Belloni [this message]
2025-10-16 6:57 ` Krzysztof Kozlowski
2025-10-16 7:56 ` Geert Uytterhoeven
2025-10-16 11:46 ` Rob Herring
2025-10-16 12:06 ` Geert Uytterhoeven
2025-10-16 10:53 ` Jonathan Cameron
2025-10-16 15:38 ` Frank Li
2025-10-16 16:06 ` Rob Herring
2025-10-17 6:26 ` Andrew Jeffery
2025-10-18 19:05 ` Jassi Brar
2025-10-20 21:35 ` Linus Walleij
2025-10-21 10:37 ` Lee Jones
2025-10-21 12:40 ` Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2025101606491337a4fffe@mail.local \
--to=alexandre.belloni@bootlin.com \
--cc=Michael.Hennerich@analog.com \
--cc=andersson@kernel.org \
--cc=andrew@codeconstruct.com.au \
--cc=andrew@lunn.ch \
--cc=andy@kernel.org \
--cc=bhelgaas@google.com \
--cc=brgl@bgdev.pl \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=daire.mcnamara@microchip.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=festevam@gmail.com \
--cc=geert+renesas@glider.be \
--cc=jassisinghbrar@gmail.com \
--cc=jic23@kernel.org \
--cc=joel@jms.id.au \
--cc=kishon@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=lars@metafoo.de \
--cc=lee@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=mchehab@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=nuno.sa@analog.com \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=tony@atomide.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).