From: Rohan G Thomas via B4 Relay <devnull+rohan.g.thomas.altera.com@kernel.org>
To: Maxime Chevallier <maxime.chevallier@bootlin.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Richard Cochran <richardcochran@gmail.com>,
Steffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Rohan G Thomas <rohan.g.thomas@altera.com>
Subject: [PATCH net-next v2 1/4] net: stmmac: socfpga: Agilex5 EMAC platform configuration
Date: Sat, 01 Nov 2025 01:27:07 +0800 [thread overview]
Message-ID: <20251101-agilex5_ext-v2-1-a6b51b4dca4d@altera.com> (raw)
In-Reply-To: <20251101-agilex5_ext-v2-0-a6b51b4dca4d@altera.com>
From: Rohan G Thomas <rohan.g.thomas@altera.com>
Agilex5 HPS EMAC uses the dwxgmac-3.10a IP, unlike previous socfpga
platforms which use dwmac1000 IP. Due to differences in platform
configuration, Agilex5 requires a distinct setup.
Introduce a setup_plat_dat() callback in socfpga_dwmac_ops to handle
platform-specific setup. This callback is invoked before
stmmac_dvr_probe() to ensure the platform data is correctly
configured. Also, implemented separate setup_plat_dat() callback for
current socfpga platforms and Agilex5.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
.../net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 30 +++++++++++++++++++---
1 file changed, 27 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index 2ff5db6d41ca08a1652d57f3eb73923b9a9558bf..5666b01723643984f21b996e7653a36f4dc22e30 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -44,6 +44,7 @@
struct socfpga_dwmac;
struct socfpga_dwmac_ops {
int (*set_phy_mode)(struct socfpga_dwmac *dwmac_priv);
+ void (*setup_plat_dat)(struct socfpga_dwmac *dwmac_priv);
};
struct socfpga_dwmac {
@@ -441,6 +442,23 @@ static int socfpga_dwmac_init(struct platform_device *pdev, void *bsp_priv)
return dwmac->ops->set_phy_mode(dwmac);
}
+static void socfpga_gen5_setup_plat_dat(struct socfpga_dwmac *dwmac)
+{
+ struct plat_stmmacenet_data *plat_dat = dwmac->plat_dat;
+
+ plat_dat->core_type = DWMAC_CORE_GMAC;
+
+ /* Rx watchdog timer in dwmac is buggy in this hw */
+ plat_dat->riwt_off = 1;
+}
+
+static void socfpga_agilex5_setup_plat_dat(struct socfpga_dwmac *dwmac)
+{
+ struct plat_stmmacenet_data *plat_dat = dwmac->plat_dat;
+
+ plat_dat->core_type = DWMAC_CORE_XGMAC;
+}
+
static int socfpga_dwmac_probe(struct platform_device *pdev)
{
struct plat_stmmacenet_data *plat_dat;
@@ -497,25 +515,31 @@ static int socfpga_dwmac_probe(struct platform_device *pdev)
plat_dat->pcs_init = socfpga_dwmac_pcs_init;
plat_dat->pcs_exit = socfpga_dwmac_pcs_exit;
plat_dat->select_pcs = socfpga_dwmac_select_pcs;
- plat_dat->core_type = DWMAC_CORE_GMAC;
- plat_dat->riwt_off = 1;
+ ops->setup_plat_dat(dwmac);
return devm_stmmac_pltfr_probe(pdev, plat_dat, &stmmac_res);
}
static const struct socfpga_dwmac_ops socfpga_gen5_ops = {
.set_phy_mode = socfpga_gen5_set_phy_mode,
+ .setup_plat_dat = socfpga_gen5_setup_plat_dat,
};
static const struct socfpga_dwmac_ops socfpga_gen10_ops = {
.set_phy_mode = socfpga_gen10_set_phy_mode,
+ .setup_plat_dat = socfpga_gen5_setup_plat_dat,
+};
+
+static const struct socfpga_dwmac_ops socfpga_agilex5_ops = {
+ .set_phy_mode = socfpga_gen10_set_phy_mode,
+ .setup_plat_dat = socfpga_agilex5_setup_plat_dat,
};
static const struct of_device_id socfpga_dwmac_match[] = {
{ .compatible = "altr,socfpga-stmmac", .data = &socfpga_gen5_ops },
{ .compatible = "altr,socfpga-stmmac-a10-s10", .data = &socfpga_gen10_ops },
- { .compatible = "altr,socfpga-stmmac-agilex5", .data = &socfpga_gen10_ops },
+ { .compatible = "altr,socfpga-stmmac-agilex5", .data = &socfpga_agilex5_ops },
{ }
};
MODULE_DEVICE_TABLE(of, socfpga_dwmac_match);
--
2.43.7
next prev parent reply other threads:[~2025-10-31 17:27 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-31 17:27 [PATCH net-next v2 0/4] net: stmmac: socfpga: Add Agilex5 platform support and enhancements Rohan G Thomas via B4 Relay
2025-10-31 17:27 ` Rohan G Thomas via B4 Relay [this message]
2025-10-31 17:27 ` [PATCH net-next v2 2/4] net: stmmac: socfpga: Enable TBS support for Agilex5 Rohan G Thomas via B4 Relay
2025-10-31 17:27 ` [PATCH net-next v2 3/4] net: stmmac: socfpga: Enable TSO for Agilex5 platform Rohan G Thomas via B4 Relay
2025-10-31 17:27 ` [PATCH net-next v2 4/4] net: stmmac: socfpga: Add hardware supported cross-timestamp Rohan G Thomas via B4 Relay
2025-11-06 2:40 ` [PATCH net-next v2 0/4] net: stmmac: socfpga: Add Agilex5 platform support and enhancements patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251101-agilex5_ext-v2-1-a6b51b4dca4d@altera.com \
--to=devnull+rohan.g.thomas.altera.com@kernel.org \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=maxime.chevallier@bootlin.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=rohan.g.thomas@altera.com \
--cc=s.trumtrar@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).