From: Vadim Fedorenko <vadim.fedorenko@linux.dev>
To: Manish Chopra <manishc@marvell.com>,
Marco Crivellari <marco.crivellari@suse.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Sunil Goutham <sgoutham@marvell.com>,
Vadim Fedorenko <vadim.fedorenko@linux.dev>
Cc: Richard Cochran <richardcochran@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Vladimir Oltean <vladimir.oltean@nxp.com>,
Simon Horman <horms@kernel.org>,
Jacob Keller <jacob.e.keller@intel.com>,
Kory Maincent <kory.maincent@bootlin.com>,
linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org
Subject: [PATCH net-next v2 5/7] net: thunderx: convert to use ndo_hwtstamp callbacks
Date: Mon, 3 Nov 2025 15:09:50 +0000 [thread overview]
Message-ID: <20251103150952.3538205-6-vadim.fedorenko@linux.dev> (raw)
In-Reply-To: <20251103150952.3538205-1-vadim.fedorenko@linux.dev>
The driver implemented SIOCSHWTSTAMP ioctl command only, but it also
stores configuration in private data, so it's possible to report it back
to users. Implement both ndo_hwtstamp_set and ndo_hwtstamp_get
callbacks.
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
---
.../net/ethernet/cavium/thunder/nicvf_main.c | 45 ++++++++++---------
1 file changed, 25 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
index 1be2dc40a1a6..0b6e30a8feb0 100644
--- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
@@ -1899,18 +1899,18 @@ static int nicvf_xdp(struct net_device *netdev, struct netdev_bpf *xdp)
}
}
-static int nicvf_config_hwtstamp(struct net_device *netdev, struct ifreq *ifr)
+static int nicvf_hwtstamp_set(struct net_device *netdev,
+ struct kernel_hwtstamp_config *config,
+ struct netlink_ext_ack *extack)
{
- struct hwtstamp_config config;
struct nicvf *nic = netdev_priv(netdev);
- if (!nic->ptp_clock)
+ if (!nic->ptp_clock) {
+ NL_SET_ERR_MSG_MOD(extack, "HW timestamping is not supported");
return -ENODEV;
+ }
- if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
- return -EFAULT;
-
- switch (config.tx_type) {
+ switch (config->tx_type) {
case HWTSTAMP_TX_OFF:
case HWTSTAMP_TX_ON:
break;
@@ -1918,7 +1918,7 @@ static int nicvf_config_hwtstamp(struct net_device *netdev, struct ifreq *ifr)
return -ERANGE;
}
- switch (config.rx_filter) {
+ switch (config->rx_filter) {
case HWTSTAMP_FILTER_NONE:
nic->hw_rx_tstamp = false;
break;
@@ -1937,7 +1937,7 @@ static int nicvf_config_hwtstamp(struct net_device *netdev, struct ifreq *ifr)
case HWTSTAMP_FILTER_PTP_V2_SYNC:
case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
nic->hw_rx_tstamp = true;
- config.rx_filter = HWTSTAMP_FILTER_ALL;
+ config->rx_filter = HWTSTAMP_FILTER_ALL;
break;
default:
return -ERANGE;
@@ -1946,20 +1946,24 @@ static int nicvf_config_hwtstamp(struct net_device *netdev, struct ifreq *ifr)
if (netif_running(netdev))
nicvf_config_hw_rx_tstamp(nic, nic->hw_rx_tstamp);
- if (copy_to_user(ifr->ifr_data, &config, sizeof(config)))
- return -EFAULT;
-
return 0;
}
-static int nicvf_ioctl(struct net_device *netdev, struct ifreq *req, int cmd)
+static int nicvf_hwtstamp_get(struct net_device *netdev,
+ struct kernel_hwtstamp_config *config)
{
- switch (cmd) {
- case SIOCSHWTSTAMP:
- return nicvf_config_hwtstamp(netdev, req);
- default:
- return -EOPNOTSUPP;
- }
+ struct nicvf *nic = netdev_priv(netdev);
+
+ if (!nic->ptp_clock)
+ return -ENODEV;
+
+ /* TX timestamping is technically always on */
+ config->tx_type = HWTSTAMP_TX_ON;
+ config->rx_filter = nic->hw_rx_tstamp ?
+ HWTSTAMP_FILTER_ALL :
+ HWTSTAMP_FILTER_NONE;
+
+ return 0;
}
static void __nicvf_set_rx_mode_task(u8 mode, struct xcast_addr_list *mc_addrs,
@@ -2081,8 +2085,9 @@ static const struct net_device_ops nicvf_netdev_ops = {
.ndo_fix_features = nicvf_fix_features,
.ndo_set_features = nicvf_set_features,
.ndo_bpf = nicvf_xdp,
- .ndo_eth_ioctl = nicvf_ioctl,
.ndo_set_rx_mode = nicvf_set_rx_mode,
+ .ndo_hwtstamp_get = nicvf_hwtstamp_get,
+ .ndo_hwtstamp_set = nicvf_hwtstamp_set,
};
static int nicvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
--
2.47.3
next prev parent reply other threads:[~2025-11-03 15:10 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-03 15:09 [PATCH net-next v2 0/7] convert drivers to use ndo_hwtstamp callbacks part 3 Vadim Fedorenko
2025-11-03 15:09 ` [PATCH net-next v2 1/7] bnx2x: convert to use ndo_hwtstamp callbacks Vadim Fedorenko
2025-11-05 1:37 ` Jakub Kicinski
2025-11-05 13:33 ` Vadim Fedorenko
2025-11-05 18:46 ` Jakub Kicinski
2025-11-05 19:12 ` Vadim Fedorenko
2025-11-03 15:09 ` [PATCH net-next v2 2/7] net: liquidio: " Vadim Fedorenko
2025-11-03 15:09 ` [PATCH net-next v2 3/7] net: liquidio_vf: " Vadim Fedorenko
2025-11-03 15:09 ` [PATCH net-next v2 4/7] net: octeon: mgmt: " Vadim Fedorenko
2025-11-03 15:09 ` Vadim Fedorenko [this message]
2025-11-03 15:09 ` [PATCH net-next v2 6/7] net: pch_gbe: " Vadim Fedorenko
2025-11-03 19:20 ` Kory Maincent
2025-11-03 15:09 ` [PATCH net-next v2 7/7] qede: " Vadim Fedorenko
2025-11-05 1:43 ` Jakub Kicinski
2025-11-05 13:36 ` Vadim Fedorenko
2025-11-05 1:50 ` [PATCH net-next v2 0/7] convert drivers to use ndo_hwtstamp callbacks part 3 patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251103150952.3538205-6-vadim.fedorenko@linux.dev \
--to=vadim.fedorenko@linux.dev \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=jacob.e.keller@intel.com \
--cc=kory.maincent@bootlin.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=manishc@marvell.com \
--cc=marco.crivellari@suse.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=sgoutham@marvell.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).