From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Richard Cochran <richardcochran@gmail.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Vinod Koul <vkoul@kernel.org>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Jose Abreu <joabreu@synopsys.com>,
Chen-Yu Tsai <wens@kernel.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
Matthew Gerlach <matthew.gerlach@altera.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Keguang Zhang <keguang.zhang@gmail.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Jan Petrous <jan.petrous@oss.nxp.com>,
s32@nxp.com, Romain Gantois <romain.gantois@bootlin.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
Heiko Stuebner <heiko@sntech.de>,
Chen Wang <unicorn_wang@outlook.com>,
Inochi Amaoto <inochiama@gmail.com>,
Emil Renner Berthing <kernel@esmil.dk>,
Minda Chen <minda.chen@starfivetech.com>,
Drew Fustini <fustini@kernel.org>, Guo Ren <guoren@kernel.org>,
Fu Wei <wefu@redhat.com>,
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.x90@mail.toshiba>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Maxime Ripard <mripard@kernel.org>,
Shuang Liang <liangshuang@eswincomputing.com>,
Zhi Li <lizhi2@eswincomputing.com>,
Shangjuan Wei <weishangjuan@eswincomputing.com>,
"G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>,
Clark Wang <xiaoning.wang@nxp.com>,
Linux Team <linux-imx@nxp.com>, Frank Li <Frank.Li@nxp.com>,
David Wu <david.wu@rock-chips.com>,
Samin Guo <samin.guo@starfivetech.com>,
Christophe Roullier <christophe.roullier@foss.st.com>,
Swathi K S <swathi.ks@samsung.com>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
Drew Fustini <dfustini@tenstorrent.com>,
linux-sunxi@lists.linux.dev, linux-amlogic@lists.infradead.org,
linux-mips@vger.kernel.org, imx@lists.linux.dev,
linux-renesas-soc@vger.kernel.org,
linux-rockchip@lists.infradead.org, sophgo@lists.linux.dev,
linux-riscv@lists.infradead.org,
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Subject: [PATCH v4 6/8] net: stmmac: qcom-ethqos: split power management context into a separate struct
Date: Tue, 04 Nov 2025 14:08:57 +0100 [thread overview]
Message-ID: <20251104-qcom-sa8255p-emac-v4-6-f76660087cea@linaro.org> (raw)
In-Reply-To: <20251104-qcom-sa8255p-emac-v4-0-f76660087cea@linaro.org>
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
With match data split into general and power-management sections, let's
now do the same with runtime device data.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
.../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 46 ++++++++++++----------
1 file changed, 25 insertions(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 1f00556bbad997e2ec76b521cffe2eb14fabb79e..09f122062dec87aa11804af2769ddff4964e6596 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -105,17 +105,21 @@ struct ethqos_emac_match_data {
const struct ethqos_emac_pm_data *pm_data;
};
+struct ethqos_emac_pm_ctx {
+ struct clk *link_clk;
+ unsigned int link_clk_rate;
+ struct phy *serdes_phy;
+};
+
struct qcom_ethqos {
struct platform_device *pdev;
void __iomem *rgmii_base;
void __iomem *mac_base;
int (*configure_func)(struct qcom_ethqos *ethqos, int speed);
- unsigned int link_clk_rate;
- struct clk *link_clk;
- struct phy *serdes_phy;
- int serdes_speed;
+ struct ethqos_emac_pm_ctx pm;
phy_interface_t phy_mode;
+ int serdes_speed;
const struct ethqos_emac_por *por;
unsigned int num_por;
@@ -181,9 +185,9 @@ ethqos_update_link_clk(struct qcom_ethqos *ethqos, int speed)
rate = rgmii_clock(speed);
if (rate > 0)
- ethqos->link_clk_rate = rate * 2;
+ ethqos->pm.link_clk_rate = rate * 2;
- clk_set_rate(ethqos->link_clk, ethqos->link_clk_rate);
+ clk_set_rate(ethqos->pm.link_clk, ethqos->pm.link_clk_rate);
}
static void
@@ -639,7 +643,7 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos, int speed)
static void ethqos_set_serdes_speed(struct qcom_ethqos *ethqos, int speed)
{
if (ethqos->serdes_speed != speed) {
- phy_set_speed(ethqos->serdes_phy, speed);
+ phy_set_speed(ethqos->pm.serdes_phy, speed);
ethqos->serdes_speed = speed;
}
}
@@ -708,23 +712,23 @@ static int qcom_ethqos_serdes_powerup(struct net_device *ndev, void *priv)
struct qcom_ethqos *ethqos = priv;
int ret;
- ret = phy_init(ethqos->serdes_phy);
+ ret = phy_init(ethqos->pm.serdes_phy);
if (ret)
return ret;
- ret = phy_power_on(ethqos->serdes_phy);
+ ret = phy_power_on(ethqos->pm.serdes_phy);
if (ret)
return ret;
- return phy_set_speed(ethqos->serdes_phy, ethqos->serdes_speed);
+ return phy_set_speed(ethqos->pm.serdes_phy, ethqos->serdes_speed);
}
static void qcom_ethqos_serdes_powerdown(struct net_device *ndev, void *priv)
{
struct qcom_ethqos *ethqos = priv;
- phy_power_off(ethqos->serdes_phy);
- phy_exit(ethqos->serdes_phy);
+ phy_power_off(ethqos->pm.serdes_phy);
+ phy_exit(ethqos->pm.serdes_phy);
}
static int ethqos_clks_config(void *priv, bool enabled)
@@ -733,7 +737,7 @@ static int ethqos_clks_config(void *priv, bool enabled)
int ret = 0;
if (enabled) {
- ret = clk_prepare_enable(ethqos->link_clk);
+ ret = clk_prepare_enable(ethqos->pm.link_clk);
if (ret) {
dev_err(ðqos->pdev->dev, "link_clk enable failed\n");
return ret;
@@ -746,7 +750,7 @@ static int ethqos_clks_config(void *priv, bool enabled)
*/
ethqos_set_func_clk_en(ethqos);
} else {
- clk_disable_unprepare(ethqos->link_clk);
+ clk_disable_unprepare(ethqos->pm.link_clk);
}
return ret;
@@ -843,9 +847,9 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
ethqos->has_emac_ge_3 = drv_data->has_emac_ge_3;
ethqos->needs_sgmii_loopback = drv_data->needs_sgmii_loopback;
- ethqos->link_clk = devm_clk_get(dev, clk_name);
- if (IS_ERR(ethqos->link_clk))
- return dev_err_probe(dev, PTR_ERR(ethqos->link_clk),
+ ethqos->pm.link_clk = devm_clk_get(dev, clk_name);
+ if (IS_ERR(ethqos->pm.link_clk))
+ return dev_err_probe(dev, PTR_ERR(ethqos->pm.link_clk),
"Failed to get link_clk\n");
ret = ethqos_clks_config(ethqos, true);
@@ -856,9 +860,9 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
if (ret)
return ret;
- ethqos->serdes_phy = devm_phy_optional_get(dev, "serdes");
- if (IS_ERR(ethqos->serdes_phy))
- return dev_err_probe(dev, PTR_ERR(ethqos->serdes_phy),
+ ethqos->pm.serdes_phy = devm_phy_optional_get(dev, "serdes");
+ if (IS_ERR(ethqos->pm.serdes_phy))
+ return dev_err_probe(dev, PTR_ERR(ethqos->pm.serdes_phy),
"Failed to get serdes phy\n");
ethqos->serdes_speed = SPEED_1000;
@@ -880,7 +884,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
if (drv_data->dma_addr_width)
plat_dat->host_dma_width = drv_data->dma_addr_width;
- if (ethqos->serdes_phy) {
+ if (ethqos->pm.serdes_phy) {
plat_dat->serdes_powerup = qcom_ethqos_serdes_powerup;
plat_dat->serdes_powerdown = qcom_ethqos_serdes_powerdown;
}
--
2.51.0
next prev parent reply other threads:[~2025-11-04 13:09 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-04 13:08 [PATCH v4 0/8] net: stmmac: qcom-ethqos: add support for SCMI power domains Bartosz Golaszewski
2025-11-04 13:08 ` [PATCH v4 1/8] dt-bindings: net: qcom: document the ethqos device for SCMI-based systems Bartosz Golaszewski
2025-11-05 8:33 ` Krzysztof Kozlowski
2025-11-04 13:08 ` [PATCH v4 2/8] net: stmmac: qcom-ethqos: use generic device properties Bartosz Golaszewski
2025-11-04 13:08 ` [PATCH v4 3/8] net: stmmac: qcom-ethqos: improve typing in devres callback Bartosz Golaszewski
2025-11-04 13:08 ` [PATCH v4 4/8] net: stmmac: qcom-ethqos: wrap emac driver data in additional structure Bartosz Golaszewski
2025-11-04 13:08 ` [PATCH v4 5/8] net: stmmac: qcom-ethqos: split power management fields into a separate structure Bartosz Golaszewski
2025-11-04 13:08 ` Bartosz Golaszewski [this message]
2025-11-04 13:08 ` [PATCH v4 7/8] net: stmmac: qcom-ethqos: define a callback for setting the serdes speed Bartosz Golaszewski
2025-11-04 13:08 ` [PATCH v4 8/8] net: stmmac: qcom-ethqos: add support for sa8255p Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251104-qcom-sa8255p-emac-v4-6-f76660087cea@linaro.org \
--to=brgl@bgdev.pl \
--cc=Frank.Li@nxp.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andersson@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=bartosz.golaszewski@linaro.org \
--cc=christophe.roullier@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=david.wu@rock-chips.com \
--cc=devicetree@vger.kernel.org \
--cc=dfustini@tenstorrent.com \
--cc=edumazet@google.com \
--cc=festevam@gmail.com \
--cc=fustini@kernel.org \
--cc=geert+renesas@glider.be \
--cc=guoren@kernel.org \
--cc=heiko@sntech.de \
--cc=imx@lists.linux.dev \
--cc=inochiama@gmail.com \
--cc=jan.petrous@oss.nxp.com \
--cc=jbrunet@baylibre.com \
--cc=jernej.skrabec@gmail.com \
--cc=joabreu@synopsys.com \
--cc=keguang.zhang@gmail.com \
--cc=kernel@esmil.dk \
--cc=kernel@pengutronix.de \
--cc=khilman@baylibre.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=liangshuang@eswincomputing.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=lizhi2@eswincomputing.com \
--cc=magnus.damm@gmail.com \
--cc=martin.blumenstingl@googlemail.com \
--cc=matthew.gerlach@altera.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=minda.chen@starfivetech.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=netdev@vger.kernel.org \
--cc=nobuhiro.iwamatsu.x90@mail.toshiba \
--cc=pabeni@redhat.com \
--cc=peppe.cavallaro@st.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=richardcochran@gmail.com \
--cc=robh@kernel.org \
--cc=romain.gantois@bootlin.com \
--cc=s.hauer@pengutronix.de \
--cc=s32@nxp.com \
--cc=samin.guo@starfivetech.com \
--cc=samuel@sholland.org \
--cc=shawnguo@kernel.org \
--cc=sophgo@lists.linux.dev \
--cc=swathi.ks@samsung.com \
--cc=unicorn_wang@outlook.com \
--cc=vineetha.g.jaya.kumaran@intel.com \
--cc=vkoul@kernel.org \
--cc=wefu@redhat.com \
--cc=weishangjuan@eswincomputing.com \
--cc=wens@kernel.org \
--cc=xiaoning.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).