[PATCH net-next v3 1/4] gve: Decouple header split from RX buffer length

[joshwash@google.com]

From: Ankit Garg <nktgrg@google.com>

Previously, enabling header split via `gve_set_hsplit_config` also
implicitly changed the RX buffer length to 4K (if supported by the
device). This coupled two settings that should be orthogonal; this patch
removes that side effect.

After this change, `gve_set_hsplit_config` only toggles the header
split configuration. The RX buffer length is no longer affected and
must be configured independently.

Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
---
 drivers/net/ethernet/google/gve/gve.h         |  3 ---
 drivers/net/ethernet/google/gve/gve_ethtool.c |  2 --
 drivers/net/ethernet/google/gve/gve_main.c    | 10 ----------
 3 files changed, 15 deletions(-)

diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
index ac325ab..872dae6 100644
--- a/drivers/net/ethernet/google/gve/gve.h
+++ b/drivers/net/ethernet/google/gve/gve.h
@@ -59,8 +59,6 @@
 
 #define GVE_DEFAULT_RX_BUFFER_SIZE 2048
 
-#define GVE_MAX_RX_BUFFER_SIZE 4096
-
 #define GVE_XDP_RX_BUFFER_SIZE_DQO 4096
 
 #define GVE_DEFAULT_RX_BUFFER_OFFSET 2048
@@ -1247,7 +1245,6 @@ void gve_rx_free_rings_gqi(struct gve_priv *priv,
 			   struct gve_rx_alloc_rings_cfg *cfg);
 void gve_rx_start_ring_gqi(struct gve_priv *priv, int idx);
 void gve_rx_stop_ring_gqi(struct gve_priv *priv, int idx);
-u16 gve_get_pkt_buf_size(const struct gve_priv *priv, bool enable_hplit);
 bool gve_header_split_supported(const struct gve_priv *priv);
 int gve_set_hsplit_config(struct gve_priv *priv, u8 tcp_data_split,
 			  struct gve_rx_alloc_rings_cfg *rx_alloc_cfg);
diff --git a/drivers/net/ethernet/google/gve/gve_ethtool.c b/drivers/net/ethernet/google/gve/gve_ethtool.c
index b030a84..db6fc85 100644
--- a/drivers/net/ethernet/google/gve/gve_ethtool.c
+++ b/drivers/net/ethernet/google/gve/gve_ethtool.c
@@ -606,8 +606,6 @@ static int gve_set_ringparam(struct net_device *netdev,
 	} else {
 		/* Set ring params for the next up */
 		priv->header_split_enabled = rx_alloc_cfg.enable_header_split;
-		priv->rx_cfg.packet_buffer_size =
-			rx_alloc_cfg.packet_buffer_size;
 		priv->tx_desc_cnt = tx_alloc_cfg.ring_size;
 		priv->rx_desc_cnt = rx_alloc_cfg.ring_size;
 	}
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index 347391a..453e40a 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -2041,14 +2041,6 @@ static void gve_tx_timeout(struct net_device *dev, unsigned int txqueue)
 	priv->tx_timeo_cnt++;
 }
 
-u16 gve_get_pkt_buf_size(const struct gve_priv *priv, bool enable_hsplit)
-{
-	if (enable_hsplit && priv->max_rx_buffer_size >= GVE_MAX_RX_BUFFER_SIZE)
-		return GVE_MAX_RX_BUFFER_SIZE;
-	else
-		return GVE_DEFAULT_RX_BUFFER_SIZE;
-}
-
 /* Header split is only supported on DQ RDA queue format. If XDP is enabled,
  * header split is not allowed.
  */
@@ -2080,8 +2072,6 @@ int gve_set_hsplit_config(struct gve_priv *priv, u8 tcp_data_split,
 		return 0;
 
 	rx_alloc_cfg->enable_header_split = enable_hdr_split;
-	rx_alloc_cfg->packet_buffer_size =
-		gve_get_pkt_buf_size(priv, enable_hdr_split);
 
 	return 0;
 }
-- 
2.51.2.997.g839fc31de9-goog