From: joshwash@google.com
To: netdev@vger.kernel.org
Cc: Joshua Washington <joshwash@google.com>,
Harshitha Ramamurthy <hramamurthy@google.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Alexei Starovoitov <ast@kernel.org>,
Daniel Borkmann <daniel@iogearbox.net>,
Jesper Dangaard Brouer <hawk@kernel.org>,
John Fastabend <john.fastabend@gmail.com>,
Stanislav Fomichev <sdf@fomichev.me>,
Willem de Bruijn <willemb@google.com>,
Praveen Kaligineedi <pkaligineedi@google.com>,
Ziwei Xiao <ziweixiao@google.com>,
John Fraker <jfraker@google.com>,
"Dr. David Alan Gilbert" <linux@treblig.org>,
Ankit Garg <nktgrg@google.com>,
linux-kernel@vger.kernel.org, bpf@vger.kernel.org
Subject: [PATCH net-next v3 2/4] gve: Use extack to log xdp config verification errors
Date: Thu, 6 Nov 2025 11:27:44 -0800 [thread overview]
Message-ID: <20251106192746.243525-3-joshwash@google.com> (raw)
In-Reply-To: <20251106192746.243525-1-joshwash@google.com>
From: Ankit Garg <nktgrg@google.com>
Plumb extack as it allows us to send more detailed error messages back
and append 'gve' suffix to method name per convention.
NL_SET_ERR_MSG_FMT_MOD doesn't support format string longer than 80
chars so keeping netdev warning with actual queue count details.
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
---
Changes in v3:
* Removed newline from extack messages (Jakub Kicinski)
Changes in v2:
* Add this patch to the series for RX buffer length management
(Jakub Kicinski)
---
drivers/net/ethernet/google/gve/gve_main.c | 24 +++++++++++++++---------
1 file changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index 453e40a..c1d9916 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -1707,18 +1707,21 @@ static int gve_xsk_wakeup(struct net_device *dev, u32 queue_id, u32 flags)
return 0;
}
-static int verify_xdp_configuration(struct net_device *dev)
+static int gve_verify_xdp_configuration(struct net_device *dev,
+ struct netlink_ext_ack *extack)
{
struct gve_priv *priv = netdev_priv(dev);
u16 max_xdp_mtu;
if (dev->features & NETIF_F_LRO) {
- netdev_warn(dev, "XDP is not supported when LRO is on.\n");
+ NL_SET_ERR_MSG_MOD(extack,
+ "XDP is not supported when LRO is on.");
return -EOPNOTSUPP;
}
if (priv->header_split_enabled) {
- netdev_warn(dev, "XDP is not supported when header-data split is enabled.\n");
+ NL_SET_ERR_MSG_MOD(extack,
+ "XDP is not supported when header-data split is enabled.");
return -EOPNOTSUPP;
}
@@ -1727,17 +1730,20 @@ static int verify_xdp_configuration(struct net_device *dev)
max_xdp_mtu -= GVE_RX_PAD;
if (dev->mtu > max_xdp_mtu) {
- netdev_warn(dev, "XDP is not supported for mtu %d.\n",
- dev->mtu);
+ NL_SET_ERR_MSG_FMT_MOD(extack,
+ "XDP is not supported for mtu %d.",
+ dev->mtu);
return -EOPNOTSUPP;
}
if (priv->rx_cfg.num_queues != priv->tx_cfg.num_queues ||
(2 * priv->tx_cfg.num_queues > priv->tx_cfg.max_queues)) {
- netdev_warn(dev, "XDP load failed: The number of configured RX queues %d should be equal to the number of configured TX queues %d and the number of configured RX/TX queues should be less than or equal to half the maximum number of RX/TX queues %d",
- priv->rx_cfg.num_queues,
- priv->tx_cfg.num_queues,
+ netdev_warn(dev,
+ "XDP load failed: The number of configured RX queues %d should be equal to the number of configured TX queues %d and the number of configured RX/TX queues should be less than or equal to half the maximum number of RX/TX queues %d.",
+ priv->rx_cfg.num_queues, priv->tx_cfg.num_queues,
priv->tx_cfg.max_queues);
+ NL_SET_ERR_MSG_MOD(extack,
+ "XDP load failed: The number of configured RX queues should be equal to the number of configured TX queues and the number of configured RX/TX queues should be less than or equal to half the maximum number of RX/TX queues");
return -EINVAL;
}
return 0;
@@ -1748,7 +1754,7 @@ static int gve_xdp(struct net_device *dev, struct netdev_bpf *xdp)
struct gve_priv *priv = netdev_priv(dev);
int err;
- err = verify_xdp_configuration(dev);
+ err = gve_verify_xdp_configuration(dev, xdp->extack);
if (err)
return err;
switch (xdp->command) {
--
2.51.2.997.g839fc31de9-goog
next prev parent reply other threads:[~2025-11-06 19:28 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-06 19:27 [PATCH net-next v3 0/4] gve: Improve RX buffer length management joshwash
2025-11-06 19:27 ` [PATCH net-next v3 1/4] gve: Decouple header split from RX buffer length joshwash
2025-11-06 19:27 ` joshwash [this message]
2025-11-06 19:27 ` [PATCH net-next v3 3/4] gve: Allow ethtool to configure rx_buf_len joshwash
2025-11-06 19:27 ` [PATCH net-next v3 4/4] gve: Default to max_rx_buffer_size for DQO if device supported joshwash
2025-11-11 1:40 ` [PATCH net-next v3 0/4] gve: Improve RX buffer length management patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251106192746.243525-3-joshwash@google.com \
--to=joshwash@google.com \
--cc=andrew+netdev@lunn.ch \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hawk@kernel.org \
--cc=hramamurthy@google.com \
--cc=jfraker@google.com \
--cc=john.fastabend@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@treblig.org \
--cc=netdev@vger.kernel.org \
--cc=nktgrg@google.com \
--cc=pabeni@redhat.com \
--cc=pkaligineedi@google.com \
--cc=sdf@fomichev.me \
--cc=willemb@google.com \
--cc=ziweixiao@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).