[PATCH net-next 1/5] net: fec: remove useless conditional preprocessor directives

[Wei Fang <wei.fang@nxp.com>]

The conditional preprocessor directive "#if !defined(CONFIG_M5272)" was
added due to build errors on MCF5272 platform, see commit d13919301d9a
("net: fec: Fix build for MCF5272"). The compilation error was caused by
some register macros not being defined on the MCF5272 platform. However,
this preprocessor directive is not needed in some parts of the driver.
First, removing it will not cause compilation errors. Second, these parts
will check quirks, which do not exist on the MCF7527 platform. Therefore,
we can safely delete these useless preprocessor directives.

Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
 drivers/net/ethernet/freescale/fec_main.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 742f3e81cc7c..e0e84f2979c8 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1773,7 +1773,6 @@ fec_enet_rx_queue(struct net_device *ndev, u16 queue_id, int budget)
 	__fec32 cbd_bufaddr;
 	u32 sub_len = 4;
 
-#if !defined(CONFIG_M5272)
 	/*If it has the FEC_QUIRK_HAS_RACC quirk property, the bit of
 	 * FEC_RACC_SHIFT16 is set by default in the probe function.
 	 */
@@ -1781,7 +1780,6 @@ fec_enet_rx_queue(struct net_device *ndev, u16 queue_id, int budget)
 		data_start += 2;
 		sub_len += 2;
 	}
-#endif
 
 #if defined(CONFIG_COLDFIRE) && !defined(CONFIG_COLDFIRE_COHERENT_DMA)
 	/*
@@ -2515,9 +2513,7 @@ static int fec_enet_mii_probe(struct net_device *ndev)
 		phy_set_max_speed(phy_dev, 1000);
 		phy_remove_link_mode(phy_dev,
 				     ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
-#if !defined(CONFIG_M5272)
 		phy_support_sym_pause(phy_dev);
-#endif
 	}
 	else
 		phy_set_max_speed(phy_dev, 100);
@@ -4400,11 +4396,9 @@ fec_probe(struct platform_device *pdev)
 	fep->num_rx_queues = num_rx_qs;
 	fep->num_tx_queues = num_tx_qs;
 
-#if !defined(CONFIG_M5272)
 	/* default enable pause frame auto negotiation */
 	if (fep->quirks & FEC_QUIRK_HAS_GBIT)
 		fep->pause_flag |= FEC_PAUSE_FLAG_AUTONEG;
-#endif
 
 	/* Select default pin state */
 	pinctrl_pm_select_default_state(&pdev->dev);
-- 
2.34.1