From: Yao Zi <ziyao@disroot.org>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Yanteng Si <si.yanteng@linux.dev>,
Huacai Chen <chenhuacai@kernel.org>,
"Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>,
Philipp Stanner <phasta@kernel.org>,
Tiezhu Yang <yangtiezhu@loongson.cn>,
Qunqin Zhao <zhaoqunqin@loongson.cn>, Yao Zi <ziyao@disroot.org>,
Vladimir Oltean <vladimir.oltean@nxp.com>,
Furong Xu <0x1207@gmail.com>,
Kunihiko Hayashi <hayashi.kunihiko@socionext.com>,
Jacob Keller <jacob.e.keller@intel.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next v4 1/3] net: stmmac: Add generic suspend/resume helper for PCI-based controllers
Date: Tue, 11 Nov 2025 10:07:26 +0000 [thread overview]
Message-ID: <20251111100727.15560-3-ziyao@disroot.org> (raw)
In-Reply-To: <20251111100727.15560-2-ziyao@disroot.org>
Most glue driver for PCI-based DWMAC controllers utilize similar
platform suspend/resume routines. Add a generic implementation to reduce
duplicated code.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/stmicro/stmmac/Kconfig | 8 ++++
drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
.../ethernet/stmicro/stmmac/stmmac_libpci.c | 48 +++++++++++++++++++
.../ethernet/stmicro/stmmac/stmmac_libpci.h | 12 +++++
4 files changed, 69 insertions(+)
create mode 100644 drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.c
create mode 100644 drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.h
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 87c5bea6c2a2..1350f16f7138 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -349,6 +349,14 @@ config DWMAC_VISCONTI
endif
+config STMMAC_LIBPCI
+ tristate "STMMAC PCI helper library"
+ depends on PCI
+ default y
+ help
+ This selects the PCI bus helpers for the stmmac driver. If you
+ have a controller with PCI interface, say Y or M here.
+
config DWMAC_INTEL
tristate "Intel GMAC support"
default X86
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index 1681a8a28313..7bf528731034 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_DWMAC_VISCONTI) += dwmac-visconti.o
stmmac-platform-objs:= stmmac_platform.o
dwmac-altr-socfpga-objs := dwmac-socfpga.o
+obj-$(CONFIG_STMMAC_LIBPCI) += stmmac_libpci.o
obj-$(CONFIG_STMMAC_PCI) += stmmac-pci.o
obj-$(CONFIG_DWMAC_INTEL) += dwmac-intel.o
obj-$(CONFIG_DWMAC_LOONGSON) += dwmac-loongson.o
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.c
new file mode 100644
index 000000000000..5c5dd502f79a
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.c
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PCI bus helpers for STMMAC driver
+ * Copyright (C) 2025 Yao Zi <ziyao@disroot.org>
+ */
+
+#include <linux/device.h>
+#include <linux/pci.h>
+
+#include "stmmac_libpci.h"
+
+int stmmac_pci_plat_suspend(struct device *dev, void *bsp_priv)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ int ret;
+
+ ret = pci_save_state(pdev);
+ if (ret)
+ return ret;
+
+ pci_disable_device(pdev);
+ pci_wake_from_d3(pdev, true);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(stmmac_pci_plat_suspend);
+
+int stmmac_pci_plat_resume(struct device *dev, void *bsp_priv)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ int ret;
+
+ pci_restore_state(pdev);
+ pci_set_power_state(pdev, PCI_D0);
+
+ ret = pci_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ pci_set_master(pdev);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(stmmac_pci_plat_resume);
+
+MODULE_DESCRIPTION("STMMAC PCI helper library");
+MODULE_AUTHOR("Yao Zi <ziyao@disroot.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.h
new file mode 100644
index 000000000000..71553184f982
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2025 Yao Zi <ziyao@disroot.org>
+ */
+
+#ifndef __STMMAC_LIBPCI_H__
+#define __STMMAC_LIBPCI_H__
+
+int stmmac_pci_plat_suspend(struct device *dev, void *bsp_priv);
+int stmmac_pci_plat_resume(struct device *dev, void *bsp_priv);
+
+#endif /* __STMMAC_LIBPCI_H__ */
--
2.51.2
next prev parent reply other threads:[~2025-11-11 10:09 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-11 10:07 [PATCH net-next v4 0/3] Unify platform suspend/resume routines for PCI DWMAC glue Yao Zi
2025-11-11 10:07 ` Yao Zi [this message]
2025-11-12 1:22 ` [PATCH net-next v4 1/3] net: stmmac: Add generic suspend/resume helper for PCI-based controllers Yanteng Si
2025-11-12 14:57 ` Jakub Kicinski
2025-11-12 15:15 ` Russell King (Oracle)
2025-11-15 9:37 ` Yao Zi
2025-11-11 10:07 ` [PATCH net-next v4 2/3] net: stmmac: loongson: Use generic PCI suspend/resume routines Yao Zi
2025-11-11 10:23 ` Russell King (Oracle)
2025-11-12 1:23 ` Yanteng Si
2025-11-11 10:11 ` [PATCH net-next v4 3/3] net: stmmac: pci: " Yao Zi
2025-11-11 10:24 ` Russell King (Oracle)
2025-11-12 1:24 ` Yanteng Si
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251111100727.15560-3-ziyao@disroot.org \
--to=ziyao@disroot.org \
--cc=0x1207@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=chenhuacai@kernel.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hayashi.kunihiko@socionext.com \
--cc=jacob.e.keller@intel.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=phasta@kernel.org \
--cc=rmk+kernel@armlinux.org.uk \
--cc=si.yanteng@linux.dev \
--cc=vladimir.oltean@nxp.com \
--cc=yangtiezhu@loongson.cn \
--cc=zhaoqunqin@loongson.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).