[PATCH 1/2] arm64: dts: imx94: add basic NETC related nodes

[Wei Fang <wei.fang@nxp.com>]

The NETC related nodes for i.MX94, this NETC has two PCIe buses, the bus
0 has 1 ENETC instance, one PTP timer, one RCEC and a switch, currently,
the switch is not added due to the DT binding and the driver is not
ready at the moment. The bus 1 has three ENETC instances, 2 PTP timers,
1 RCEC and one EMDIO.

Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx94.dtsi | 138 +++++++++++++++++++++++
 1 file changed, 138 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx94.dtsi b/arch/arm64/boot/dts/freescale/imx94.dtsi
index 73184f03f8a3..4fdec712307f 100644
--- a/arch/arm64/boot/dts/freescale/imx94.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx94.dtsi
@@ -1191,6 +1191,144 @@ wdog3: watchdog@49220000 {
 			};
 		};
 
+		netc_blk_ctrl: system-controller@4ceb0000 {
+			compatible = "nxp,imx94-netc-blk-ctrl";
+			reg = <0x0 0x4ceb0000 0x0 0x10000>,
+			      <0x0 0x4cec0000 0x0 0x10000>,
+			      <0x0 0x4c810000 0x0 0x7C>;
+			reg-names = "ierb", "prb", "netcmix";
+			ranges;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			clocks = <&scmi_clk IMX94_CLK_ENET>;
+			clock-names = "ipg";
+			power-domains = <&scmi_devpd IMX94_PD_NETC>;
+			status = "disabled";
+
+			netc_bus0: pcie@4ca00000 {
+				compatible = "pci-host-ecam-generic";
+				reg = <0x0 0x4ca00000 0x0 0x100000>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				linux,pci-domain = <0>;
+				bus-range = <0x0 0x0>;
+				msi-map = <0x00 &its 0x68 0x1>, //ENETC3 PF
+					  <0x01 &its 0x61 0x1>, //Timer0
+					  <0x02 &its 0x64 0x1>, //Switch
+					  <0x40 &its 0x69 0x1>, //ENETC3 VF0
+					  <0x80 &its 0x6a 0x1>, //ENETC3 VF1
+					  <0xC0 &its 0x6b 0x1>; //ENETC3 VF2
+					 /* Switch BAR0 - non-prefetchable memory */
+				ranges = <0x02000000 0x0 0x4cc00000  0x0 0x4cc00000  0x0 0x80000
+					 /* ENETC 3 and Timer 0 BAR0 - non-prefetchable memory */
+					 0x02000000 0x0 0x4cd40000  0x0 0x4cd40000  0x0 0x60000
+					 /* Switch and Timer 0 BAR2 - prefetchable memory */
+					 0x42000000 0x0 0x4ce00000  0x0 0x4ce00000  0x0 0x20000
+					 /* ENETC 3 VF0-2 BAR0 - non-prefetchable memory */
+					 0x02000000 0x0 0x4ce50000  0x0 0x4ce50000  0x0 0x30000
+					 /* ENETC 3 VF0-2 BAR2 - prefetchable memory */
+					 0x42000000 0x0 0x4ce80000  0x0 0x4ce80000  0x0 0x30000>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0000 0 0 1 &gic 0 0
+						 GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+				enetc3: ethernet@0,0 {
+					compatible = "pci1131,e110";
+					reg = <0x0 0 0 0 0>;
+					phy-mode = "internal";
+					status = "disabled";
+
+					fixed-link {
+						speed = <2500>;
+						full-duplex;
+						pause;
+					};
+				};
+
+				netc_timer0: ptp-timer@0,1 {
+					compatible = "pci1131,ee02";
+					reg = <0x100 0 0 0 0>;
+					status = "disabled";
+				};
+
+				rcec@1,0 {
+					reg = <0x800 0 0 0 0>;
+					interrupts = <1>;
+				};
+			};
+
+			netc_bus1: pcie@4cb00000 {
+				compatible = "pci-host-ecam-generic";
+				reg = <0x0 0x4cb00000 0x0 0x100000>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				linux,pci-domain = <1>;
+				bus-range = <0x1 0x1>;
+				msi-map = <0x100 &its 0x65 0x1>, //ENETC0 PF
+					  <0x101 &its 0x62 0x1>, //Timer1
+					  <0x140 &its 0x66 0x1>, //ENETC1 PF
+					  <0x180 &its 0x67 0x1>, //ENETC2 PF
+					  <0x181 &its 0x63 0x1>, //Timer2
+					  <0x1C0 &its 0x60 0x1>; //EMDIO
+					 /* ENETC 0-2 BAR0 - non-prefetchable memory */
+				ranges = <0x02000000 0x0 0x4cC80000  0x0 0x4cc80000  0x0 0xc0000
+					 /* Timer 1-2 and EMDIO BAR0 - non-prefetchable memory */
+					 0x02000000 0x0 0x4cda0000  0x0 0x4cda0000  0x0 0x60000
+					 /* Timer 1-2 and EMDIO BAR2 - prefetchable memory */
+					 0x42000000 0x0 0x4ce20000  0x0 0x4ce20000  0x0 0x30000>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0000 0 0 1 &gic 0 0
+						 GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+
+				enetc0: ethernet@0,0 {
+					compatible = "pci1131,e101";
+					reg = <0x10000 0 0 0 0>;
+					status = "disabled";
+				};
+
+				netc_timer1: ptp-timer@0,1 {
+					compatible = "pci1131,ee02";
+					reg = <0x10100 0 0 0 0>;
+					status = "disabled";
+				};
+
+				rcec@1,0 {
+					reg = <0x10800 0 0 0 0>;
+					interrupts = <1>;
+				};
+
+				enetc1: ethernet@8,0 {
+					compatible = "pci1131,e101";
+					reg = <0x14000 0 0 0 0>;
+					status = "disabled";
+				};
+
+				enetc2: ethernet@10,0 {
+					compatible = "pci1131,e101";
+					reg = <0x18000 0 0 0 0>;
+					status = "disabled";
+				};
+
+				netc_timer2: ptp-timer@10,1 {
+					compatible = "pci1131,ee02";
+					reg = <0x18100 0 0 0 0>;
+					status = "disabled";
+				};
+
+				netc_emdio: mdio@18,0 {
+					compatible = "pci1131,ee00";
+					reg = <0x1c000 0 0 0 0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+				};
+			};
+		};
+
 		ddr-pmu@4e090dc0 {
 			compatible = "fsl,imx94-ddr-pmu", "fsl,imx93-ddr-pmu";
 			reg = <0x0 0x4e090dc0 0x0 0x200>;
-- 
2.34.1