[PATCH net-next v2] amd-xgbe: let the MAC manage PHY PM

[Raju Rangoju <Raju.Rangoju@amd.com>]

Use the MAC managed PM flag to indicate that MAC driver takes care of
suspending/resuming the PHY, and reset it when the device is brought up.

Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
---
Changes since v1:
 - remove the first call to xgbe_phy_reset() in .ndo_open

 drivers/net/ethernet/amd/xgbe/xgbe-drv.c    | 14 +++++++++-----
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c |  1 +
 2 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
index f3adf29b222b..0653e69f0ef7 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
@@ -1259,6 +1259,11 @@ static int xgbe_start(struct xgbe_prv_data *pdata)
 
 	udp_tunnel_nic_reset_ntf(netdev);
 
+	/* Reset the phy settings */
+	ret = xgbe_phy_reset(pdata);
+	if (ret)
+		goto err_txrx;
+
 	netif_tx_start_all_queues(netdev);
 
 	xgbe_start_timers(pdata);
@@ -1268,6 +1273,10 @@ static int xgbe_start(struct xgbe_prv_data *pdata)
 
 	return 0;
 
+err_txrx:
+	hw_if->disable_rx(pdata);
+	hw_if->disable_tx(pdata);
+
 err_irqs:
 	xgbe_free_irqs(pdata);
 
@@ -1574,11 +1583,6 @@ static int xgbe_open(struct net_device *netdev)
 		goto err_dev_wq;
 	}
 
-	/* Reset the phy settings */
-	ret = xgbe_phy_reset(pdata);
-	if (ret)
-		goto err_an_wq;
-
 	/* Enable the clocks */
 	ret = clk_prepare_enable(pdata->sysclk);
 	if (ret) {
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index 35a381a83647..a68757e8fd22 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -989,6 +989,7 @@ static int xgbe_phy_find_phy_device(struct xgbe_prv_data *pdata)
 		return ret;
 	}
 	phy_data->phydev = phydev;
+	phy_data->phydev->mac_managed_pm = true;
 
 	xgbe_phy_external_phy_quirks(pdata);
 
-- 
2.34.1