netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Jason A. Donenfeld" <Jason@zx2c4.com>
To: netdev@vger.kernel.org, kuba@kernel.org, pabeni@redhat.com
Cc: "Asbjørn Sloth Tønnesen" <ast@fiberby.net>,
	"Jason A. Donenfeld" <Jason@zx2c4.com>
Subject: [PATCH net-next 10/11] tools: ynl: add sample for wireguard
Date: Mon,  1 Dec 2025 03:28:48 +0100	[thread overview]
Message-ID: <20251201022849.418666-11-Jason@zx2c4.com> (raw)
In-Reply-To: <20251201022849.418666-1-Jason@zx2c4.com>

From: Asbjørn Sloth Tønnesen <ast@fiberby.net>

Add a sample application for WireGuard, using the generated C library.

The main benefit of this is to exercise the generated library,
which might be useful for future selftests.

In order to support usage with a pre-YNL wireguard.h in /usr/include,
the former header guard is added to Makefile.deps as well.

Example:
  $ make -C tools/net/ynl/lib
  $ make -C tools/net/ynl/generated
  $ make -C tools/net/ynl/samples wireguard
  $ ./tools/net/ynl/samples/wireguard
  usage: ./tools/net/ynl/samples/wireguard <ifindex|ifname>
  $ sudo ./tools/net/ynl/samples/wireguard wg-test
  Interface 3: wg-test
      Peer 6adfb183a4a2c94a2f92dab5ade762a4788[...]:
          Data: rx: 42 / tx: 42 bytes
          Allowed IPs:
              0.0.0.0/0
              ::/0

Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 MAINTAINERS                       |   1 +
 tools/net/ynl/Makefile.deps       |   2 +
 tools/net/ynl/samples/.gitignore  |   1 +
 tools/net/ynl/samples/wireguard.c | 104 ++++++++++++++++++++++++++++++
 4 files changed, 108 insertions(+)
 create mode 100644 tools/net/ynl/samples/wireguard.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 8b44a380642c..660ff0306bad 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -27675,6 +27675,7 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/netlink/specs/wireguard.yaml
 F:	drivers/net/wireguard/
+F:	tools/net/ynl/samples/wireguard.c
 F:	tools/testing/selftests/wireguard/
 
 WISTRON LAPTOP BUTTON DRIVER
diff --git a/tools/net/ynl/Makefile.deps b/tools/net/ynl/Makefile.deps
index 865fd2e8519e..a9a5348b31a3 100644
--- a/tools/net/ynl/Makefile.deps
+++ b/tools/net/ynl/Makefile.deps
@@ -48,3 +48,5 @@ CFLAGS_tc:= $(call get_hdr_inc,__LINUX_RTNETLINK_H,rtnetlink.h) \
 	$(call get_hdr_inc,_TC_SKBEDIT_H,tc_act/tc_skbedit.h) \
 	$(call get_hdr_inc,_TC_TUNNEL_KEY_H,tc_act/tc_tunnel_key.h)
 CFLAGS_tcp_metrics:=$(call get_hdr_inc,_LINUX_TCP_METRICS_H,tcp_metrics.h)
+CFLAGS_wireguard:=$(call get_hdr_inc,_LINUX_WIREGUARD_H,wireguard.h) \
+	-D _WG_UAPI_WIREGUARD_H # alternate pre-YNL guard
diff --git a/tools/net/ynl/samples/.gitignore b/tools/net/ynl/samples/.gitignore
index 05087ee323ba..6fbed294feac 100644
--- a/tools/net/ynl/samples/.gitignore
+++ b/tools/net/ynl/samples/.gitignore
@@ -8,3 +8,4 @@ rt-link
 rt-route
 tc
 tc-filter-add
+wireguard
diff --git a/tools/net/ynl/samples/wireguard.c b/tools/net/ynl/samples/wireguard.c
new file mode 100644
index 000000000000..43f3551eb101
--- /dev/null
+++ b/tools/net/ynl/samples/wireguard.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <arpa/inet.h>
+#include <string.h>
+#include <stdio.h>
+#include <errno.h>
+#include <ynl.h>
+
+#include "wireguard-user.h"
+
+static void print_allowed_ip(const struct wireguard_wgallowedip *aip)
+{
+	char addr_out[INET6_ADDRSTRLEN];
+
+	if (!inet_ntop(aip->family, aip->ipaddr, addr_out, sizeof(addr_out))) {
+		addr_out[0] = '?';
+		addr_out[1] = '\0';
+	}
+	printf("\t\t\t%s/%u\n", addr_out, aip->cidr_mask);
+}
+
+/* Only printing public key in this demo. For better key formatting,
+ * use the constant-time implementation as found in wireguard-tools.
+ */
+static void print_peer_header(const struct wireguard_wgpeer *peer)
+{
+	unsigned int i;
+	uint8_t *key = peer->public_key;
+	unsigned int len = peer->_len.public_key;
+
+	if (len != 32)
+		return;
+	printf("\tPeer ");
+	for (i = 0; i < len; i++)
+		printf("%02x", key[i]);
+	printf(":\n");
+}
+
+static void print_peer(const struct wireguard_wgpeer *peer)
+{
+	unsigned int i;
+
+	print_peer_header(peer);
+	printf("\t\tData: rx: %llu / tx: %llu bytes\n",
+	       peer->rx_bytes, peer->tx_bytes);
+	printf("\t\tAllowed IPs:\n");
+	for (i = 0; i < peer->_count.allowedips; i++)
+		print_allowed_ip(&peer->allowedips[i]);
+}
+
+static void build_request(struct wireguard_get_device_req *req, char *arg)
+{
+	char *endptr;
+	int ifindex;
+
+	ifindex = strtol(arg, &endptr, 0);
+	if (endptr != arg + strlen(arg) || errno != 0)
+		ifindex = 0;
+	if (ifindex > 0)
+		wireguard_get_device_req_set_ifindex(req, ifindex);
+	else
+		wireguard_get_device_req_set_ifname(req, arg);
+}
+
+int main(int argc, char **argv)
+{
+	struct wireguard_get_device_list *devs;
+	struct wireguard_get_device_req *req;
+	struct ynl_sock *ys;
+
+	if (argc < 2) {
+		fprintf(stderr, "usage: %s <ifindex|ifname>\n", argv[0]);
+		return 1;
+	}
+
+	req = wireguard_get_device_req_alloc();
+	build_request(req, argv[1]);
+
+	ys = ynl_sock_create(&ynl_wireguard_family, NULL);
+	if (!ys)
+		return 2;
+
+	devs = wireguard_get_device_dump(ys, req);
+	if (!devs)
+		goto err_close;
+
+	ynl_dump_foreach(devs, d) {
+		unsigned int i;
+
+		printf("Interface %d: %s\n", d->ifindex, d->ifname);
+		for (i = 0; i < d->_count.peers; i++)
+			print_peer(&d->peers[i]);
+	}
+	wireguard_get_device_list_free(devs);
+	wireguard_get_device_req_free(req);
+	ynl_sock_destroy(ys);
+
+	return 0;
+
+err_close:
+	fprintf(stderr, "YNL (%d): %s\n", ys->err.code, ys->err.msg);
+	wireguard_get_device_req_free(req);
+	ynl_sock_destroy(ys);
+	return 3;
+}
-- 
2.52.0


  parent reply	other threads:[~2025-12-01  2:29 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-12-01  2:28 [PATCH net-next 00/11] wireguard updates for 6.19 Jason A. Donenfeld
2025-12-01  2:28 ` [PATCH net-next 01/11] wireguard: netlink: enable strict genetlink validation Jason A. Donenfeld
2025-12-01  2:28 ` [PATCH net-next 02/11] wireguard: netlink: validate nested arrays in policy Jason A. Donenfeld
2025-12-01  2:28 ` [PATCH net-next 03/11] wireguard: netlink: use WG_KEY_LEN in policies Jason A. Donenfeld
2025-12-01  2:28 ` [PATCH net-next 04/11] wireguard: netlink: convert to split ops Jason A. Donenfeld
2025-12-01  2:28 ` [PATCH net-next 05/11] wireguard: netlink: lower .maxattr for WG_CMD_GET_DEVICE Jason A. Donenfeld
2025-12-01  2:28 ` [PATCH net-next 06/11] netlink: specs: add specification for wireguard Jason A. Donenfeld
2025-12-01  2:28 ` [PATCH net-next 07/11] wireguard: uapi: move enum wg_cmd Jason A. Donenfeld
2025-12-01  2:28 ` [PATCH net-next 08/11] wireguard: uapi: move flag enums Jason A. Donenfeld
2025-12-01  2:28 ` [PATCH net-next 09/11] wireguard: uapi: generate header with ynl-gen Jason A. Donenfeld
2025-12-01  2:28 ` Jason A. Donenfeld [this message]
2025-12-01 21:00   ` [PATCH net-next 10/11] tools: ynl: add sample for wireguard Asbjørn Sloth Tønnesen
2025-12-02  3:09     ` Jason A. Donenfeld
2025-12-01  2:28 ` [PATCH net-next 11/11] wireguard: netlink: generate netlink code Jason A. Donenfeld
2025-12-01 23:07 ` [PATCH net-next 00/11] wireguard updates for 6.19 Jakub Kicinski
2025-12-02  3:19   ` Jason A. Donenfeld
2025-12-02  4:37     ` Jakub Kicinski
2025-12-04 17:43       ` Jason A. Donenfeld
2025-12-02  4:40 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251201022849.418666-11-Jason@zx2c4.com \
    --to=jason@zx2c4.com \
    --cc=ast@fiberby.net \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).