[PATCH RFC/RFT net-next v2 1/5] net: dsa: deny bridge VLAN with existing 8021q upper on any port

[Jonas Gorski <jonas.gorski@gmail.com>]

Currently adding a bridge vlan to a port only checks for an 8021q upper
of that vlan on the port, but does not check for matching 8021q uppers
on other ports.

This leads to the possibility of configuring shared vlans on ports after
adding uppers.

E.g. adding the upper after configuring the vlan would be rejected

$ ip link add br0 type bridge vlan filtering 1
$ ip link set swp1 master br0
$ ip link set swp2 master br0
$ bridge vlan add dev swp2 vid 100
$ ip link add swp1.100 link swp1 type vlan id 100
RTNETLINK answers: Resource busy

But the other way around would currently be accepted:

$ ip link add br0 type bridge vlan filtering 1
$ ip link set swp1 master br0
$ ip link set swp2 master br0
$ ip link add swp1.100 link swp1 type vlan id 100
$ bridge vlan add dev swp2 vid 100
$ bridge vlan
port              vlan-id
swp2              1 PVID Egress Untagged
                  100
swp1              1 PVID Egress Untagged
br0               1 PVID Egress Untagged

Fix this by checking all members of the bridge for a matching vlan
upper, and not the port itself.

After:

$ ip link add br0 type bridge vlan filtering 1
$ ip link set swp1 master br0
$ ip link set swp2 master br0
$ ip link add swp1.100 link swp1 type vlan id 100
$ bridge vlan add dev swp2 vid 100
RTNETLINK answers: Resource busy

Fixes: 1ce39f0ee8da ("net: dsa: convert denying bridge VLAN with existing 8021q upper to PRECHANGEUPPER")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
v1 -> v2:
* no changes

 net/dsa/user.c | 31 ++++++++++++++++++++-----------
 1 file changed, 20 insertions(+), 11 deletions(-)

diff --git a/net/dsa/user.c b/net/dsa/user.c
index f59d66f0975d..fa1fe0f1493a 100644
--- a/net/dsa/user.c
+++ b/net/dsa/user.c
@@ -653,21 +653,30 @@ static int dsa_user_port_attr_set(struct net_device *dev, const void *ctx,
 
 /* Must be called under rcu_read_lock() */
 static int
-dsa_user_vlan_check_for_8021q_uppers(struct net_device *user,
+dsa_user_vlan_check_for_8021q_uppers(struct dsa_port *dp,
 				     const struct switchdev_obj_port_vlan *vlan)
 {
-	struct net_device *upper_dev;
-	struct list_head *iter;
+	struct dsa_switch *ds = dp->ds;
+	struct dsa_port *other_dp;
 
-	netdev_for_each_upper_dev_rcu(user, upper_dev, iter) {
-		u16 vid;
+	dsa_switch_for_each_user_port(other_dp, ds) {
+		struct net_device *user = other_dp->user;
+		struct net_device *upper_dev;
+		struct list_head *iter;
 
-		if (!is_vlan_dev(upper_dev))
+		if (!dsa_port_bridge_same(dp, other_dp))
 			continue;
 
-		vid = vlan_dev_vlan_id(upper_dev);
-		if (vid == vlan->vid)
-			return -EBUSY;
+		netdev_for_each_upper_dev_rcu(user, upper_dev, iter) {
+			u16 vid;
+
+			if (!is_vlan_dev(upper_dev))
+				continue;
+
+			vid = vlan_dev_vlan_id(upper_dev);
+			if (vid == vlan->vid)
+				return -EBUSY;
+		}
 	}
 
 	return 0;
@@ -693,11 +702,11 @@ static int dsa_user_vlan_add(struct net_device *dev,
 	 */
 	if (br_vlan_enabled(dsa_port_bridge_dev_get(dp))) {
 		rcu_read_lock();
-		err = dsa_user_vlan_check_for_8021q_uppers(dev, vlan);
+		err = dsa_user_vlan_check_for_8021q_uppers(dp, vlan);
 		rcu_read_unlock();
 		if (err) {
 			NL_SET_ERR_MSG_MOD(extack,
-					   "Port already has a VLAN upper with this VID");
+					   "This VLAN already has an upper configured on a bridge port");
 			return err;
 		}
 	}
-- 
2.43.0