[net-next,PATCH v2 2/3] dt-bindings: net: realtek,rtl82xx: Document realtek,ssc-enable property

[Marek Vasut <marek.vasut@mailbox.org>]

Document support for spread spectrum clocking (SSC) on RTL8211F(D)(I)-CG,
RTL8211FS(I)(-VS)-CG, RTL8211FG(I)(-VS)-CG PHYs. Introduce DT properties
'realtek,clkout-ssc-enable', 'realtek,rxc-ssc-enable' and
'realtek,sysclk-ssc-enable' which control CLKOUT, RXC and SYSCLK
SSC spread spectrum clocking enablement on these signals. These
clock are not exposed via the clock API, therefore assigned-clock-sscs
property does not apply.

Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
---
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Aleksander Jan Bajkowski <olek2@wp.pl>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Ivan Galkin <ivan.galkin@axis.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Michael Klein <michael@fossekall.de>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: devicetree@vger.kernel.org
Cc: netdev@vger.kernel.org
---
V2: Split SSC clock control for each CLKOUT, RXC, SYSCLK signal
---
 .../devicetree/bindings/net/realtek,rtl82xx.yaml  | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
index eafcc2f3e3d66..45033c31a2d51 100644
--- a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
+++ b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
@@ -50,6 +50,21 @@ properties:
     description:
       Disable CLKOUT clock, CLKOUT clock default is enabled after hardware reset.
 
+  realtek,clkout-ssc-enable:
+    type: boolean
+    description:
+      Enable CLKOUT SSC mode, CLKOUT SSC mode default is disabled after hardware reset.
+
+  realtek,rxc-ssc-enable:
+    type: boolean
+    description:
+      Enable RXC SSC mode, RXC SSC mode default is disabled after hardware reset.
+
+  realtek,sysclk-ssc-enable:
+    type: boolean
+    description:
+      Enable SYSCLK SSC mode, SYSCLK SSC mode default is disabled after hardware reset.
+
   wakeup-source:
     type: boolean
     description:
-- 
2.51.0