[PATCH 00/15] net: ftgmac100: Various probe cleanups

[PATCH 00/15] net: ftgmac100: Various probe cleanups

[Jacky Chou]

The probe function of the ftgmac100 is rather complex, due to the way
it has evolved over time, dealing with poor DT descriptions, and new
variants of the MAC.

Make use of DT match data to identify the MAC variant, rather than
looking at the compatible string all the time.

Make use of devm_ calls to simplify cleanup. This indirectly fixes
inconsistent goto label names.

Always probe the MDIO bus, when it exists. This simplifies the logic a
bit.

Move code into helpers to simply probe.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
Andrew Lunn (15):
      net: ftgmac100: List all compatibles
      net: ftgmac100: Add match data containing MAC ID
      net: ftgmac100: Replace all of_device_is_compatible()
      net: ftgmac100: Use devm_alloc_etherdev()
      net: ftgmac100: Use devm_request_memory_region/devm_ioremap
      net: ftgmac100: Use devm_clk_get_enabled
      net: ftgmac100: Simplify error handling for ftgmac100_initial_mac
      net: ftgmac100: Move NCSI probe code into a helper
      net: ftgmac100: Always register the MDIO bus when it exists
      net: ftgmac100: Simplify legacy MDIO setup
      net: ftgmac100: Move DT probe into a helper
      net: ftgmac100: Remove redundant PHY_POLL
      net: ftgmac100: Simplify error handling for ftgmac100_setup_mdio
      net: ftgmac100: Simplify condition on HW arbitration
      net: ftgmac100: Fix wrong netif_napi_del in release

 drivers/net/ethernet/faraday/ftgmac100.c | 302 +++++++++++++++++--------------
 1 file changed, 169 insertions(+), 133 deletions(-)
---
base-commit: c303e8b86d9dbd6868f5216272973292f7f3b7f1
change-id: 20251208-ftgmac-cleanup-20b223bf4681

Best regards,
-- 
Jacky Chou <jacky_chou@aspeedtech.com>

[PATCH 01/15] net: ftgmac100: List all compatibles

[Jacky Chou]

From: Andrew Lunn <andrew@lunn.ch>

As a step towards cleanup the probe function, list each compatible the
driver supports.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index a863f7841210..bd768a93b9e6 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -2091,6 +2091,9 @@ static void ftgmac100_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id ftgmac100_of_match[] = {
+	{ .compatible = "aspeed,ast2400-mac" },
+	{ .compatible = "aspeed,ast2500-mac" },
+	{ .compatible = "aspeed,ast2600-mac" },
 	{ .compatible = "faraday,ftgmac100" },
 	{ }
 };

-- 
2.34.1

[PATCH 02/15] net: ftgmac100: Add match data containing MAC ID

[Jacky Chou]

From: Andrew Lunn <andrew@lunn.ch>

The driver supports 4 different versions of the FTGMAC core.  Extend
the compatible matching to include match data, which indicates the
version of the MAC. Default to the initial Faraday device if DT is not
being used. Lookup the match data early in probe to keep error handing
simple.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 55 +++++++++++++++++++++++++++++---
 1 file changed, 50 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index bd768a93b9e6..104eb7b1f5bb 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -33,6 +33,17 @@
 
 #define DRV_NAME	"ftgmac100"
 
+enum ftgmac100_mac_id {
+	FTGMAC100_FARADAY = 1,
+	FTGMAC100_AST2400,
+	FTGMAC100_AST2500,
+	FTGMAC100_AST2600
+};
+
+struct ftgmac100_match_data {
+	enum ftgmac100_mac_id mac_id;
+};
+
 /* Arbitrary values, I am not sure the HW has limits */
 #define MAX_RX_QUEUE_ENTRIES	1024
 #define MAX_TX_QUEUE_ENTRIES	1024
@@ -66,6 +77,8 @@ struct ftgmac100 {
 	struct resource *res;
 	void __iomem *base;
 
+	enum ftgmac100_mac_id mac_id;
+
 	/* Rx ring */
 	unsigned int rx_q_entries;
 	struct ftgmac100_rxdes *rxdes;
@@ -1835,6 +1848,8 @@ static bool ftgmac100_has_child_node(struct device_node *np, const char *name)
 
 static int ftgmac100_probe(struct platform_device *pdev)
 {
+	const struct ftgmac100_match_data *match_data;
+	enum ftgmac100_mac_id mac_id;
 	struct resource *res;
 	int irq;
 	struct net_device *netdev;
@@ -1843,6 +1858,16 @@ static int ftgmac100_probe(struct platform_device *pdev)
 	struct device_node *np;
 	int err = 0;
 
+	np = pdev->dev.of_node;
+	if (np) {
+		match_data = of_device_get_match_data(&pdev->dev);
+		if (!match_data)
+			return -EINVAL;
+		mac_id = match_data->mac_id;
+	} else {
+		mac_id = FTGMAC100_FARADAY;
+	}
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
 		return -ENXIO;
@@ -1870,6 +1895,7 @@ static int ftgmac100_probe(struct platform_device *pdev)
 	priv = netdev_priv(netdev);
 	priv->netdev = netdev;
 	priv->dev = &pdev->dev;
+	priv->mac_id = mac_id;
 	INIT_WORK(&priv->reset_task, ftgmac100_reset_task);
 
 	/* map io memory */
@@ -1900,7 +1926,6 @@ static int ftgmac100_probe(struct platform_device *pdev)
 	if (err)
 		goto err_phy_connect;
 
-	np = pdev->dev.of_node;
 	if (np && (of_device_is_compatible(np, "aspeed,ast2400-mac") ||
 		   of_device_is_compatible(np, "aspeed,ast2500-mac") ||
 		   of_device_is_compatible(np, "aspeed,ast2600-mac"))) {
@@ -2090,11 +2115,31 @@ static void ftgmac100_remove(struct platform_device *pdev)
 	free_netdev(netdev);
 }
 
+static const struct ftgmac100_match_data ftgmac100_match_data_ast2400 = {
+	.mac_id = FTGMAC100_AST2400
+};
+
+static const struct ftgmac100_match_data ftgmac100_match_data_ast2500 = {
+	.mac_id = FTGMAC100_AST2500
+};
+
+static const struct ftgmac100_match_data ftgmac100_match_data_ast2600 = {
+	.mac_id = FTGMAC100_AST2600
+};
+
+static const struct ftgmac100_match_data ftgmac100_match_data_faraday = {
+	.mac_id = FTGMAC100_FARADAY
+};
+
 static const struct of_device_id ftgmac100_of_match[] = {
-	{ .compatible = "aspeed,ast2400-mac" },
-	{ .compatible = "aspeed,ast2500-mac" },
-	{ .compatible = "aspeed,ast2600-mac" },
-	{ .compatible = "faraday,ftgmac100" },
+	{ .compatible = "aspeed,ast2400-mac",
+	  .data = &ftgmac100_match_data_ast2400},
+	{ .compatible = "aspeed,ast2500-mac",
+	  .data = &ftgmac100_match_data_ast2500 },
+	{ .compatible = "aspeed,ast2600-mac",
+	  .data = &ftgmac100_match_data_ast2600 },
+	{ .compatible = "faraday,ftgmac100",
+	  .data = &ftgmac100_match_data_faraday },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ftgmac100_of_match);

-- 
2.34.1

[PATCH 03/15] net: ftgmac100: Replace all of_device_is_compatible()

[Jacky Chou]

From: Andrew Lunn <andrew@lunn.ch>

Now that the priv structure includes the MAC ID, make use of it
instead of the more expensive of_device_is_compatible().

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 104eb7b1f5bb..f07167cabf39 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1720,8 +1720,8 @@ static int ftgmac100_setup_mdio(struct net_device *netdev)
 	if (!priv->mii_bus)
 		return -EIO;
 
-	if (of_device_is_compatible(np, "aspeed,ast2400-mac") ||
-	    of_device_is_compatible(np, "aspeed,ast2500-mac")) {
+	if (priv->mac_id == FTGMAC100_AST2400 ||
+	    priv->mac_id == FTGMAC100_AST2500) {
 		/* The AST2600 has a separate MDIO controller */
 
 		/* For the AST2400 and AST2500 this driver only supports the
@@ -1926,9 +1926,9 @@ static int ftgmac100_probe(struct platform_device *pdev)
 	if (err)
 		goto err_phy_connect;
 
-	if (np && (of_device_is_compatible(np, "aspeed,ast2400-mac") ||
-		   of_device_is_compatible(np, "aspeed,ast2500-mac") ||
-		   of_device_is_compatible(np, "aspeed,ast2600-mac"))) {
+	if (priv->mac_id == FTGMAC100_AST2400 ||
+	    priv->mac_id == FTGMAC100_AST2500 ||
+	    priv->mac_id == FTGMAC100_AST2600) {
 		priv->rxdes0_edorr_mask = BIT(30);
 		priv->txdes0_edotr_mask = BIT(30);
 		priv->is_aspeed = true;
@@ -1973,8 +1973,8 @@ static int ftgmac100_probe(struct platform_device *pdev)
 		 * available PHYs and register them.
 		 */
 		if (of_get_property(np, "phy-handle", NULL) &&
-		    (of_device_is_compatible(np, "aspeed,ast2400-mac") ||
-		     of_device_is_compatible(np, "aspeed,ast2500-mac"))) {
+		    (priv->mac_id == FTGMAC100_AST2400 ||
+		     priv->mac_id == FTGMAC100_AST2500)) {
 			err = ftgmac100_setup_mdio(netdev);
 			if (err)
 				goto err_setup_mdio;
@@ -2026,7 +2026,7 @@ static int ftgmac100_probe(struct platform_device *pdev)
 			goto err_phy_connect;
 
 		/* Disable ast2600 problematic HW arbitration */
-		if (of_device_is_compatible(np, "aspeed,ast2600-mac"))
+		if (priv->mac_id == FTGMAC100_AST2600)
 			iowrite32(FTGMAC100_TM_DEFAULT,
 				  priv->base + FTGMAC100_OFFSET_TM);
 	}
@@ -2044,11 +2044,11 @@ static int ftgmac100_probe(struct platform_device *pdev)
 		netdev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER;
 
 	/* AST2400  doesn't have working HW checksum generation */
-	if (np && (of_device_is_compatible(np, "aspeed,ast2400-mac")))
+	if (priv->mac_id == FTGMAC100_AST2400)
 		netdev->hw_features &= ~NETIF_F_HW_CSUM;
 
 	/* AST2600 tx checksum with NCSI is broken */
-	if (priv->use_ncsi && of_device_is_compatible(np, "aspeed,ast2600-mac"))
+	if (priv->use_ncsi && priv->mac_id == FTGMAC100_AST2600)
 		netdev->hw_features &= ~NETIF_F_HW_CSUM;
 
 	if (np && of_get_property(np, "no-hw-checksum", NULL))

-- 
2.34.1

[PATCH 04/15] net: ftgmac100: Use devm_alloc_etherdev()

[Jacky Chou]

From: Andrew Lunn <andrew@lunn.ch>

Make use of devm_alloc_etherdev() to simplify cleanup.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index f07167cabf39..75c7ab43e7e9 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1877,10 +1877,9 @@ static int ftgmac100_probe(struct platform_device *pdev)
 		return irq;
 
 	/* setup net_device */
-	netdev = alloc_etherdev(sizeof(*priv));
+	netdev = devm_alloc_etherdev(&pdev->dev, sizeof(*priv));
 	if (!netdev) {
-		err = -ENOMEM;
-		goto err_alloc_etherdev;
+		return -ENOMEM;
 	}
 
 	SET_NETDEV_DEV(netdev, &pdev->dev);
@@ -2080,8 +2079,6 @@ static int ftgmac100_probe(struct platform_device *pdev)
 err_ioremap:
 	release_resource(priv->res);
 err_req_mem:
-	free_netdev(netdev);
-err_alloc_etherdev:
 	return err;
 }
 
@@ -2112,7 +2109,6 @@ static void ftgmac100_remove(struct platform_device *pdev)
 	release_resource(priv->res);
 
 	netif_napi_del(&priv->napi);
-	free_netdev(netdev);
 }
 
 static const struct ftgmac100_match_data ftgmac100_match_data_ast2400 = {

-- 
2.34.1

[PATCH 05/15] net: ftgmac100: Use devm_request_memory_region/devm_ioremap

[Jacky Chou]

From: Andrew Lunn <andrew@lunn.ch>

Make use of devm_ methods to request and remap the device memory to
simplify cleanup.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 20 ++++++--------------
 1 file changed, 6 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 75c7ab43e7e9..c23d5d675c5f 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1898,19 +1898,18 @@ static int ftgmac100_probe(struct platform_device *pdev)
 	INIT_WORK(&priv->reset_task, ftgmac100_reset_task);
 
 	/* map io memory */
-	priv->res = request_mem_region(res->start, resource_size(res),
-				       dev_name(&pdev->dev));
+	priv->res = devm_request_mem_region(&pdev->dev,
+					    res->start, resource_size(res),
+					    dev_name(&pdev->dev));
 	if (!priv->res) {
 		dev_err(&pdev->dev, "Could not reserve memory region\n");
-		err = -ENOMEM;
-		goto err_req_mem;
+		return -ENOMEM;
 	}
 
-	priv->base = ioremap(res->start, resource_size(res));
+	priv->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
 	if (!priv->base) {
 		dev_err(&pdev->dev, "Failed to ioremap ethernet registers\n");
-		err = -EIO;
-		goto err_ioremap;
+		return -EIO;
 	}
 
 	netdev->irq = irq;
@@ -2075,10 +2074,6 @@ static int ftgmac100_probe(struct platform_device *pdev)
 		ncsi_unregister_dev(priv->ndev);
 	ftgmac100_destroy_mdio(netdev);
 err_setup_mdio:
-	iounmap(priv->base);
-err_ioremap:
-	release_resource(priv->res);
-err_req_mem:
 	return err;
 }
 
@@ -2105,9 +2100,6 @@ static void ftgmac100_remove(struct platform_device *pdev)
 	ftgmac100_phy_disconnect(netdev);
 	ftgmac100_destroy_mdio(netdev);
 
-	iounmap(priv->base);
-	release_resource(priv->res);
-
 	netif_napi_del(&priv->napi);
 }
 

-- 
2.34.1

[PATCH 06/15] net: ftgmac100: Use devm_clk_get_enabled

[Jacky Chou]

From: Andrew Lunn <andrew@lunn.ch>

Make use of devm_ methods to request and enable clocks to simplify
cleanup.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 22 ++++------------------
 1 file changed, 4 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index c23d5d675c5f..3972076ffcf6 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1801,13 +1801,10 @@ static int ftgmac100_setup_clk(struct ftgmac100 *priv)
 	struct clk *clk;
 	int rc;
 
-	clk = devm_clk_get(priv->dev, NULL /* MACCLK */);
+	clk = devm_clk_get_enabled(priv->dev, NULL /* MACCLK */);
 	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 	priv->clk = clk;
-	rc = clk_prepare_enable(priv->clk);
-	if (rc)
-		return rc;
 
 	/* Aspeed specifies a 100MHz clock is required for up to
 	 * 1000Mbit link speeds. As NCSI is limited to 100Mbit, 25MHz
@@ -1816,21 +1813,15 @@ static int ftgmac100_setup_clk(struct ftgmac100 *priv)
 	rc = clk_set_rate(priv->clk, priv->use_ncsi ? FTGMAC_25MHZ :
 			  FTGMAC_100MHZ);
 	if (rc)
-		goto cleanup_clk;
+		return rc;
 
 	/* RCLK is for RMII, typically used for NCSI. Optional because it's not
 	 * necessary if it's the AST2400 MAC, or the MAC is configured for
 	 * RGMII, or the controller is not an ASPEED-based controller.
 	 */
-	priv->rclk = devm_clk_get_optional(priv->dev, "RCLK");
-	rc = clk_prepare_enable(priv->rclk);
-	if (!rc)
-		return 0;
+	priv->rclk = devm_clk_get_optional_enabled(priv->dev, "RCLK");
 
-cleanup_clk:
-	clk_disable_unprepare(priv->clk);
-
-	return rc;
+	return 0;
 }
 
 static bool ftgmac100_has_child_node(struct device_node *np, const char *name)
@@ -2065,8 +2056,6 @@ static int ftgmac100_probe(struct platform_device *pdev)
 	return 0;
 
 err_register_netdev:
-	clk_disable_unprepare(priv->rclk);
-	clk_disable_unprepare(priv->clk);
 err_phy_connect:
 	ftgmac100_phy_disconnect(netdev);
 err_ncsi_dev:
@@ -2089,9 +2078,6 @@ static void ftgmac100_remove(struct platform_device *pdev)
 		ncsi_unregister_dev(priv->ndev);
 	unregister_netdev(netdev);
 
-	clk_disable_unprepare(priv->rclk);
-	clk_disable_unprepare(priv->clk);
-
 	/* There's a small chance the reset task will have been re-queued,
 	 * during stop, make sure it's gone before we free the structure.
 	 */

-- 
2.34.1

[PATCH 07/15] net: ftgmac100: Simplify error handling for ftgmac100_initial_mac

[Jacky Chou]

From: Andrew Lunn <andrew@lunn.ch>

ftgmac100_initial_mac() does not allocate any resources. All resources
by the probe function up until this call point use devm_ methods. So
just return the error code rather than use a goto.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 3972076ffcf6..df030d85b3ce 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1913,7 +1913,7 @@ static int ftgmac100_probe(struct platform_device *pdev)
 	/* MAC address from chip or random one */
 	err = ftgmac100_initial_mac(priv);
 	if (err)
-		goto err_phy_connect;
+		return err;
 
 	if (priv->mac_id == FTGMAC100_AST2400 ||
 	    priv->mac_id == FTGMAC100_AST2500 ||

-- 
2.34.1

[PATCH 08/15] net: ftgmac100: Move NCSI probe code into a helper

[Jacky Chou]

From: Andrew Lunn <andrew@lunn.ch>

To help reduce the complexity of the probe function move the NCSI
probe code into a help. No functional change intended.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 63 ++++++++++++++++++--------------
 1 file changed, 36 insertions(+), 27 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index df030d85b3ce..1bdc6793e817 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1837,6 +1837,39 @@ static bool ftgmac100_has_child_node(struct device_node *np, const char *name)
 	return ret;
 }
 
+static int ftgmac100_probe_ncsi(struct net_device *netdev,
+				struct ftgmac100 *priv,
+				struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct phy_device *phydev;
+	int err;
+
+	if (!IS_ENABLED(CONFIG_NET_NCSI)) {
+		dev_err(&pdev->dev, "NCSI stack not enabled\n");
+		return -EINVAL;
+	}
+
+	dev_info(&pdev->dev, "Using NCSI interface\n");
+	priv->use_ncsi = true;
+	priv->ndev = ncsi_register_dev(netdev, ftgmac100_ncsi_handler);
+	if (!priv->ndev)
+		return -EINVAL;
+
+	phydev = fixed_phy_register(&ncsi_phy_status, np);
+	if (IS_ERR(phydev)) {
+		dev_err(&pdev->dev, "failed to register fixed PHY device\n");
+		return PTR_ERR(phydev);
+	}
+	err = phy_connect_direct(netdev, phydev, ftgmac100_adjust_link,
+				 PHY_INTERFACE_MODE_RMII);
+	if (err) {
+		dev_err(&pdev->dev, "Connecting PHY failed\n");
+		fixed_phy_unregister(phydev);
+	}
+	return err;
+}
+
 static int ftgmac100_probe(struct platform_device *pdev)
 {
 	const struct ftgmac100_match_data *match_data;
@@ -1844,7 +1877,6 @@ static int ftgmac100_probe(struct platform_device *pdev)
 	struct resource *res;
 	int irq;
 	struct net_device *netdev;
-	struct phy_device *phydev;
 	struct ftgmac100 *priv;
 	struct device_node *np;
 	int err = 0;
@@ -1927,32 +1959,9 @@ static int ftgmac100_probe(struct platform_device *pdev)
 	}
 
 	if (np && of_get_property(np, "use-ncsi", NULL)) {
-		if (!IS_ENABLED(CONFIG_NET_NCSI)) {
-			dev_err(&pdev->dev, "NCSI stack not enabled\n");
-			err = -EINVAL;
-			goto err_phy_connect;
-		}
-
-		dev_info(&pdev->dev, "Using NCSI interface\n");
-		priv->use_ncsi = true;
-		priv->ndev = ncsi_register_dev(netdev, ftgmac100_ncsi_handler);
-		if (!priv->ndev) {
-			err = -EINVAL;
-			goto err_phy_connect;
-		}
-
-		phydev = fixed_phy_register(&ncsi_phy_status, np);
-		if (IS_ERR(phydev)) {
-			dev_err(&pdev->dev, "failed to register fixed PHY device\n");
-			err = PTR_ERR(phydev);
-			goto err_phy_connect;
-		}
-		err = phy_connect_direct(netdev, phydev, ftgmac100_adjust_link,
-					 PHY_INTERFACE_MODE_RMII);
-		if (err) {
-			dev_err(&pdev->dev, "Connecting PHY failed\n");
-			goto err_phy_connect;
-		}
+		err = ftgmac100_probe_ncsi(netdev, priv, pdev);
+		if (err)
+			goto err_setup_mdio;
 	} else if (np && (of_phy_is_fixed_link(np) ||
 			  of_get_property(np, "phy-handle", NULL))) {
 		struct phy_device *phy;

-- 
2.34.1

[PATCH 09/15] net: ftgmac100: Always register the MDIO bus when it exists

[Jacky Chou]

From: Andrew Lunn <andrew@lunn.ch>

Both the Aspeed 2400 and 2500 and the original faraday version of the
MAC have MDIO bus controllers as part of the MAC. Since it exists,
always registering it makes the code simpler, and causes no harm. If
there is no mdio node in device tree, of_mdiobus_register() will fall
back to mdiobus_register(), making it safe.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 23 ++++++++---------------
 1 file changed, 8 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 1bdc6793e817..327e29064793 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1958,6 +1958,14 @@ static int ftgmac100_probe(struct platform_device *pdev)
 		priv->txdes0_edotr_mask = BIT(15);
 	}
 
+	if (priv->mac_id == FTGMAC100_FARADAY ||
+	    priv->mac_id == FTGMAC100_AST2400 ||
+	    priv->mac_id == FTGMAC100_AST2500) {
+		err = ftgmac100_setup_mdio(netdev);
+		if (err)
+			goto err_phy_connect;
+	}
+
 	if (np && of_get_property(np, "use-ncsi", NULL)) {
 		err = ftgmac100_probe_ncsi(netdev, priv, pdev);
 		if (err)
@@ -1966,18 +1974,6 @@ static int ftgmac100_probe(struct platform_device *pdev)
 			  of_get_property(np, "phy-handle", NULL))) {
 		struct phy_device *phy;
 
-		/* Support "mdio"/"phy" child nodes for ast2400/2500 with
-		 * an embedded MDIO controller. Automatically scan the DTS for
-		 * available PHYs and register them.
-		 */
-		if (of_get_property(np, "phy-handle", NULL) &&
-		    (priv->mac_id == FTGMAC100_AST2400 ||
-		     priv->mac_id == FTGMAC100_AST2500)) {
-			err = ftgmac100_setup_mdio(netdev);
-			if (err)
-				goto err_setup_mdio;
-		}
-
 		phy = of_phy_get_and_connect(priv->netdev, np,
 					     &ftgmac100_adjust_link);
 		if (!phy) {
@@ -2000,9 +1996,6 @@ static int ftgmac100_probe(struct platform_device *pdev)
 		 * PHYs.
 		 */
 		priv->use_ncsi = false;
-		err = ftgmac100_setup_mdio(netdev);
-		if (err)
-			goto err_setup_mdio;
 
 		err = ftgmac100_mii_probe(netdev);
 		if (err) {

-- 
2.34.1

[PATCH 10/15] net: ftgmac100: Simplify legacy MDIO setup

[Jacky Chou]

From: Andrew Lunn <andrew@lunn.ch>

There are old device trees which place the PHY nodes directly in the
MAC nodes, rather than within an MDIO container node.

The probe logic indicates that the use of NCSI and the legacy
placement of PHYs is mutually exclusive. Hence priv->use_ncsi cannot
be true, so there is no reason to set it false.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 327e29064793..cc01cf616229 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1995,8 +1995,6 @@ static int ftgmac100_probe(struct platform_device *pdev)
 		 * child node. Automatically scan the MDIO bus for available
 		 * PHYs.
 		 */
-		priv->use_ncsi = false;
-
 		err = ftgmac100_mii_probe(netdev);
 		if (err) {
 			dev_err(priv->dev, "MII probe failed!\n");

-- 
2.34.1

[PATCH 11/15] net: ftgmac100: Move DT probe into a helper

[Jacky Chou]

From: Andrew Lunn <andrew@lunn.ch>

By moving all the DT probe code into a helper, the complex if else if
else structure can be simplified. No functional change intended.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 89 +++++++++++++++++++-------------
 1 file changed, 54 insertions(+), 35 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index cc01cf616229..d30b0b050648 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1870,6 +1870,58 @@ static int ftgmac100_probe_ncsi(struct net_device *netdev,
 	return err;
 }
 
+static int ftgmac100_probe_dt(struct net_device *netdev,
+			      struct platform_device *pdev,
+			      struct ftgmac100 *priv,
+			      struct device_node *np)
+{
+	struct phy_device *phy;
+	int err;
+
+	if (of_get_property(np, "use-ncsi", NULL))
+		return ftgmac100_probe_ncsi(netdev, priv, pdev);
+
+	if (of_phy_is_fixed_link(np) ||
+	    of_get_property(np, "phy-handle", NULL)) {
+		/* Support "mdio"/"phy" child nodes for ast2400/2500
+		 * with an embedded MDIO controller. Automatically
+		 * scan the DTS for available PHYs and register
+		 * them. 2600 has an independent MDIO controller, not
+		 * part of the MAC.
+		 */
+		phy = of_phy_get_and_connect(priv->netdev, np,
+					     &ftgmac100_adjust_link);
+		if (!phy) {
+			dev_err(&pdev->dev, "Failed to connect to phy\n");
+			return -EINVAL;
+		}
+
+		/* Indicate that we support PAUSE frames (see comment in
+		 * Documentation/networking/phy.rst)
+		 */
+		phy_support_asym_pause(phy);
+
+		/* Display what we found */
+		phy_attached_info(phy);
+		return 0;
+	}
+
+	if (!ftgmac100_has_child_node(np, "mdio")) {
+		/* Support legacy ASPEED devicetree descriptions that
+		 * decribe a MAC with an embedded MDIO controller but
+		 * have no "mdio" child node. Automatically scan the
+		 * MDIO bus for available PHYs.
+		 */
+		err = ftgmac100_mii_probe(netdev);
+		if (err) {
+			dev_err(priv->dev, "MII probe failed!\n");
+			return err;
+		}
+	}
+
+	return 0;
+}
+
 static int ftgmac100_probe(struct platform_device *pdev)
 {
 	const struct ftgmac100_match_data *match_data;
@@ -1966,41 +2018,10 @@ static int ftgmac100_probe(struct platform_device *pdev)
 			goto err_phy_connect;
 	}
 
-	if (np && of_get_property(np, "use-ncsi", NULL)) {
-		err = ftgmac100_probe_ncsi(netdev, priv, pdev);
+	if (np) {
+		err = ftgmac100_probe_dt(netdev, pdev, priv, np);
 		if (err)
-			goto err_setup_mdio;
-	} else if (np && (of_phy_is_fixed_link(np) ||
-			  of_get_property(np, "phy-handle", NULL))) {
-		struct phy_device *phy;
-
-		phy = of_phy_get_and_connect(priv->netdev, np,
-					     &ftgmac100_adjust_link);
-		if (!phy) {
-			dev_err(&pdev->dev, "Failed to connect to phy\n");
-			err = -EINVAL;
 			goto err_phy_connect;
-		}
-
-		/* Indicate that we support PAUSE frames (see comment in
-		 * Documentation/networking/phy.rst)
-		 */
-		phy_support_asym_pause(phy);
-
-		/* Display what we found */
-		phy_attached_info(phy);
-	} else if (np && !ftgmac100_has_child_node(np, "mdio")) {
-		/* Support legacy ASPEED devicetree descriptions that decribe a
-		 * MAC with an embedded MDIO controller but have no "mdio"
-		 * child node. Automatically scan the MDIO bus for available
-		 * PHYs.
-		 */
-		err = ftgmac100_mii_probe(netdev);
-		if (err) {
-			dev_err(priv->dev, "MII probe failed!\n");
-			goto err_ncsi_dev;
-		}
-
 	}
 
 	priv->rst = devm_reset_control_get_optional_exclusive(priv->dev, NULL);
@@ -2058,11 +2079,9 @@ static int ftgmac100_probe(struct platform_device *pdev)
 err_register_netdev:
 err_phy_connect:
 	ftgmac100_phy_disconnect(netdev);
-err_ncsi_dev:
 	if (priv->ndev)
 		ncsi_unregister_dev(priv->ndev);
 	ftgmac100_destroy_mdio(netdev);
-err_setup_mdio:
 	return err;
 }
 

-- 
2.34.1

[PATCH 12/15] net: ftgmac100: Remove redundant PHY_POLL

[Jacky Chou]

From: Andrew Lunn <andrew@lunn.ch>

When an MDIO bus is allocated, the irqs for each PHY are set to
polling. Remove the redundant code in the MAC driver which does the
same.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index d30b0b050648..23a2212ee3bc 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1712,7 +1712,7 @@ static int ftgmac100_setup_mdio(struct net_device *netdev)
 	struct platform_device *pdev = to_platform_device(priv->dev);
 	struct device_node *np = pdev->dev.of_node;
 	struct device_node *mdio_np;
-	int i, err = 0;
+	int err = 0;
 	u32 reg;
 
 	/* initialize mdio bus */
@@ -1740,9 +1740,6 @@ static int ftgmac100_setup_mdio(struct net_device *netdev)
 	priv->mii_bus->read = ftgmac100_mdiobus_read;
 	priv->mii_bus->write = ftgmac100_mdiobus_write;
 
-	for (i = 0; i < PHY_MAX_ADDR; i++)
-		priv->mii_bus->irq[i] = PHY_POLL;
-
 	mdio_np = of_get_child_by_name(np, "mdio");
 
 	err = of_mdiobus_register(priv->mii_bus, mdio_np);

-- 
2.34.1

[PATCH 13/15] net: ftgmac100: Simplify error handling for ftgmac100_setup_mdio

[Jacky Chou]

From: Andrew Lunn <andrew@lunn.ch>

ftgmac100_setup_mdio() cleans up any resources it gets on error. All
resources obtained by the probe function up until this call point use
devm_ methods. So just return the error code rather than use a goto.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 23a2212ee3bc..982944ab1ff1 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -2012,7 +2012,7 @@ static int ftgmac100_probe(struct platform_device *pdev)
 	    priv->mac_id == FTGMAC100_AST2500) {
 		err = ftgmac100_setup_mdio(netdev);
 		if (err)
-			goto err_phy_connect;
+			return err;
 	}
 
 	if (np) {

-- 
2.34.1

[PATCH 14/15] net: ftgmac100: Simplify condition on HW arbitration

[Jacky Chou]

From: Andrew Lunn <andrew@lunn.ch>

The MAC ID is sufficient to indicate this is a ast2600.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 982944ab1ff1..38e7ac6628d5 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -2031,13 +2031,13 @@ static int ftgmac100_probe(struct platform_device *pdev)
 		err = ftgmac100_setup_clk(priv);
 		if (err)
 			goto err_phy_connect;
-
-		/* Disable ast2600 problematic HW arbitration */
-		if (priv->mac_id == FTGMAC100_AST2600)
-			iowrite32(FTGMAC100_TM_DEFAULT,
-				  priv->base + FTGMAC100_OFFSET_TM);
 	}
 
+	/* Disable ast2600 problematic HW arbitration */
+	if (priv->mac_id == FTGMAC100_AST2600)
+		iowrite32(FTGMAC100_TM_DEFAULT,
+			  priv->base + FTGMAC100_OFFSET_TM);
+
 	/* Default ring sizes */
 	priv->rx_q_entries = priv->new_rx_q_entries = DEF_RX_QUEUE_ENTRIES;
 	priv->tx_q_entries = priv->new_tx_q_entries = DEF_TX_QUEUE_ENTRIES;

-- 
2.34.1

[PATCH 15/15] net: ftgmac100: Fix wrong netif_napi_del in release

[Jacky Chou]

From: Andrew Lunn <andrew@lunn.ch>

netif_napi_add() is called in open. There is a symmetric call to
netif_napi_del() in stop. Remove to wrong call to netif_napi_del() in
release.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 38e7ac6628d5..42344588aa44 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -2101,8 +2101,6 @@ static void ftgmac100_remove(struct platform_device *pdev)
 
 	ftgmac100_phy_disconnect(netdev);
 	ftgmac100_destroy_mdio(netdev);
-
-	netif_napi_del(&priv->napi);
 }
 
 static const struct ftgmac100_match_data ftgmac100_match_data_ast2400 = {

-- 
2.34.1