From: Vadim Fedorenko <vadim.fedorenko@linux.dev>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
Russell King <linux@armlinux.org.uk>,
Heiner Kallweit <hkallweit1@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Richard Cochran <richardcochran@gmail.com>,
Andrew Lunn <andrew@lunn.ch>
Cc: Simon Horman <horms@kernel.org>,
Vladimir Oltean <vladimir.oltean@nxp.com>,
Jacob Keller <jacob.e.keller@intel.com>,
Kory Maincent <kory.maincent@bootlin.com>,
netdev@vger.kernel.org,
Vadim Fedorenko <vadim.fedorenko@linux.dev>
Subject: [PATCH net-next v3 1/4] net: phy: micrel: improve HW timestamping config logic
Date: Tue, 6 Jan 2026 16:07:20 +0000 [thread overview]
Message-ID: <20260106160723.3925872-2-vadim.fedorenko@linux.dev> (raw)
In-Reply-To: <20260106160723.3925872-1-vadim.fedorenko@linux.dev>
The driver was adjusting stored values independently of what was
actually supported and configured. Improve logic to store values
once all checks are passing
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
---
drivers/net/phy/micrel.c | 30 ++++++++++++++++++++++++------
1 file changed, 24 insertions(+), 6 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 05de68b9f719..c0aea74a559f 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -3157,9 +3157,6 @@ static int lan8814_hwtstamp_set(struct mii_timestamper *mii_ts,
int txcfg = 0, rxcfg = 0;
int pkt_ts_enable;
- ptp_priv->hwts_tx_type = config->tx_type;
- ptp_priv->rx_filter = config->rx_filter;
-
switch (config->rx_filter) {
case HWTSTAMP_FILTER_NONE:
ptp_priv->layer = 0;
@@ -3187,6 +3184,18 @@ static int lan8814_hwtstamp_set(struct mii_timestamper *mii_ts,
return -ERANGE;
}
+ switch (config->tx_type) {
+ case HWTSTAMP_TX_OFF:
+ case HWTSTAMP_TX_ON:
+ case HWTSTAMP_TX_ONESTEP_SYNC:
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ ptp_priv->hwts_tx_type = config->tx_type;
+ ptp_priv->rx_filter = config->rx_filter;
+
if (ptp_priv->layer & PTP_CLASS_L2) {
rxcfg = PTP_RX_PARSE_CONFIG_LAYER2_EN_;
txcfg = PTP_TX_PARSE_CONFIG_LAYER2_EN_;
@@ -5051,9 +5060,6 @@ static int lan8841_hwtstamp_set(struct mii_timestamper *mii_ts,
int txcfg = 0, rxcfg = 0;
int pkt_ts_enable;
- ptp_priv->hwts_tx_type = config->tx_type;
- ptp_priv->rx_filter = config->rx_filter;
-
switch (config->rx_filter) {
case HWTSTAMP_FILTER_NONE:
ptp_priv->layer = 0;
@@ -5081,6 +5087,18 @@ static int lan8841_hwtstamp_set(struct mii_timestamper *mii_ts,
return -ERANGE;
}
+ switch (config->tx_type) {
+ case HWTSTAMP_TX_OFF:
+ case HWTSTAMP_TX_ON:
+ case HWTSTAMP_TX_ONESTEP_SYNC:
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ ptp_priv->hwts_tx_type = config->tx_type;
+ ptp_priv->rx_filter = config->rx_filter;
+
/* Setup parsing of the frames and enable the timestamping for ptp
* frames
*/
--
2.47.3
next prev parent reply other threads:[~2026-01-06 16:08 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-06 16:07 [PATCH net-next v3 0/4] support for hwtstamp_get in phy - part 2 Vadim Fedorenko
2026-01-06 16:07 ` Vadim Fedorenko [this message]
2026-01-06 17:54 ` [PATCH net-next v3 1/4] net: phy: micrel: improve HW timestamping config logic Kory Maincent
2026-01-06 16:07 ` [PATCH net-next v3 2/4] net: phy: micrel: add HW timestamp configuration reporting Vadim Fedorenko
2026-01-06 16:07 ` [PATCH net-next v3 3/4] net: phy: microchip_rds_ptp: improve HW ts config logic Vadim Fedorenko
2026-01-06 17:58 ` Kory Maincent
2026-01-06 16:07 ` [PATCH net-next v3 4/4] net: phy: microchip_rds_ptp: add HW timestamp configuration reporting Vadim Fedorenko
2026-01-09 4:20 ` [PATCH net-next v3 0/4] support for hwtstamp_get in phy - part 2 patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260106160723.3925872-2-vadim.fedorenko@linux.dev \
--to=vadim.fedorenko@linux.dev \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=jacob.e.keller@intel.com \
--cc=kory.maincent@bootlin.com \
--cc=kuba@kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox