* [PATCH net-next] xgbe: Use netlink extack to report errors to ethtool
@ 2026-01-09 7:47 Raju Rangoju
2026-01-09 14:25 ` Jakub Kicinski
0 siblings, 1 reply; 2+ messages in thread
From: Raju Rangoju @ 2026-01-09 7:47 UTC (permalink / raw)
To: netdev
Cc: pabeni, kuba, edumazet, davem, andrew+netdev, Shyam-sundar.S-k,
Vishal Badole, Raju Rangoju
From: Vishal Badole <Vishal.Badole@amd.com>
Upgrade XGBE driver to report errors via netlink extack instead
of netdev_error so ethtool userspace can be aware of failures.
Signed-off-by: Vishal Badole <Vishal.Badole@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
---
drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 46 +++++++++++---------
1 file changed, 26 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
index 0d19b09497a0..0d1e979c864e 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
@@ -362,13 +362,16 @@ static int xgbe_set_coalesce(struct net_device *netdev,
/* Check the bounds of values for Rx */
if (rx_riwt > XGMAC_MAX_DMA_RIWT) {
- netdev_err(netdev, "rx-usec is limited to %d usecs\n",
- hw_if->riwt_to_usec(pdata, XGMAC_MAX_DMA_RIWT));
+ NL_SET_ERR_MSG_FMT_MOD(extack,
+ "rx-usec is limited to %d usecs\n",
+ hw_if->riwt_to_usec(pdata,
+ XGMAC_MAX_DMA_RIWT));
return -EINVAL;
}
if (rx_frames > pdata->rx_desc_count) {
- netdev_err(netdev, "rx-frames is limited to %d frames\n",
- pdata->rx_desc_count);
+ NL_SET_ERR_MSG_FMT_MOD(extack,
+ "rx-frames is limited to %d frames\n",
+ pdata->rx_desc_count);
return -EINVAL;
}
@@ -387,8 +390,9 @@ static int xgbe_set_coalesce(struct net_device *netdev,
return -EINVAL;
}
if (tx_frames > pdata->tx_desc_count) {
- netdev_err(netdev, "tx-frames is limited to %d frames\n",
- pdata->tx_desc_count);
+ NL_SET_ERR_MSG_FMT_MOD(extack,
+ "tx-frames is limited to %d frames\n",
+ pdata->tx_desc_count);
return -EINVAL;
}
@@ -474,7 +478,7 @@ static int xgbe_set_rxfh(struct net_device *netdev,
if (rxfh->hfunc != ETH_RSS_HASH_NO_CHANGE &&
rxfh->hfunc != ETH_RSS_HASH_TOP) {
- netdev_err(netdev, "unsupported hash function\n");
+ NL_SET_ERR_MSG_FMT_MOD(extack, "unsupported hash function\n");
return -EOPNOTSUPP;
}
@@ -561,37 +565,39 @@ static int xgbe_set_ringparam(struct net_device *netdev,
unsigned int rx, tx;
if (ringparam->rx_mini_pending || ringparam->rx_jumbo_pending) {
- netdev_err(netdev, "unsupported ring parameter\n");
+ NL_SET_ERR_MSG_FMT_MOD(extack, "unsupported ring parameter\n");
return -EINVAL;
}
if ((ringparam->rx_pending < XGBE_RX_DESC_CNT_MIN) ||
(ringparam->rx_pending > XGBE_RX_DESC_CNT_MAX)) {
- netdev_err(netdev,
- "rx ring parameter must be between %u and %u\n",
- XGBE_RX_DESC_CNT_MIN, XGBE_RX_DESC_CNT_MAX);
+ NL_SET_ERR_MSG_FMT_MOD(extack,
+ "rx ring parameter must be between %u and %u\n",
+ XGBE_RX_DESC_CNT_MIN,
+ XGBE_RX_DESC_CNT_MAX);
return -EINVAL;
}
if ((ringparam->tx_pending < XGBE_TX_DESC_CNT_MIN) ||
(ringparam->tx_pending > XGBE_TX_DESC_CNT_MAX)) {
- netdev_err(netdev,
- "tx ring parameter must be between %u and %u\n",
- XGBE_TX_DESC_CNT_MIN, XGBE_TX_DESC_CNT_MAX);
+ NL_SET_ERR_MSG_FMT_MOD(extack,
+ "tx ring parameter must be between %u and %u\n",
+ XGBE_TX_DESC_CNT_MIN,
+ XGBE_TX_DESC_CNT_MAX);
return -EINVAL;
}
rx = __rounddown_pow_of_two(ringparam->rx_pending);
if (rx != ringparam->rx_pending)
- netdev_notice(netdev,
- "rx ring parameter rounded to power of two: %u\n",
- rx);
+ NL_SET_ERR_MSG_FMT_MOD(extack,
+ "rx ring parameter rounded to power of two: %u\n",
+ rx);
tx = __rounddown_pow_of_two(ringparam->tx_pending);
if (tx != ringparam->tx_pending)
- netdev_notice(netdev,
- "tx ring parameter rounded to power of two: %u\n",
- tx);
+ NL_SET_ERR_MSG_FMT_MOD(extack,
+ "tx ring parameter rounded to power of two: %u\n",
+ tx);
if ((rx == pdata->rx_desc_count) &&
(tx == pdata->tx_desc_count))
--
2.34.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH net-next] xgbe: Use netlink extack to report errors to ethtool
2026-01-09 7:47 [PATCH net-next] xgbe: Use netlink extack to report errors to ethtool Raju Rangoju
@ 2026-01-09 14:25 ` Jakub Kicinski
0 siblings, 0 replies; 2+ messages in thread
From: Jakub Kicinski @ 2026-01-09 14:25 UTC (permalink / raw)
To: Raju Rangoju
Cc: netdev, pabeni, edumazet, davem, andrew+netdev, Shyam-sundar.S-k,
Vishal Badole
On Fri, 9 Jan 2026 13:17:46 +0530 Raju Rangoju wrote:
> if (ringparam->rx_mini_pending || ringparam->rx_jumbo_pending) {
> - netdev_err(netdev, "unsupported ring parameter\n");
> + NL_SET_ERR_MSG_FMT_MOD(extack, "unsupported ring parameter\n");
> return -EINVAL;
> }
There should be no \n at the end of the extack string.
Please don't use _FMT if there's no formatting going on.
--
pw-bot: cr
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-01-09 14:25 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-01-09 7:47 [PATCH net-next] xgbe: Use netlink extack to report errors to ethtool Raju Rangoju
2026-01-09 14:25 ` Jakub Kicinski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox