public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: Raju Rangoju <Raju.Rangoju@amd.com>
To: <netdev@vger.kernel.org>
Cc: <pabeni@redhat.com>, <kuba@kernel.org>, <edumazet@google.com>,
	<davem@davemloft.net>, <andrew+netdev@lunn.ch>,
	<Shyam-sundar.S-k@amd.com>, Vishal Badole <Vishal.Badole@amd.com>
Subject: [PATCH net-next v2] xgbe: Use netlink extack to report errors to ethtool
Date: Wed, 14 Jan 2026 09:59:27 +0530	[thread overview]
Message-ID: <20260114042927.1745503-1-Raju.Rangoju@amd.com> (raw)

From: Vishal Badole <Vishal.Badole@amd.com>

Upgrade XGBE driver to report errors via netlink extack instead
of netdev_error so ethtool userspace can be aware of failures.

Signed-off-by: Vishal Badole <Vishal.Badole@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
Changes since v1:
 - Remove \n at the end of the extack string
 - Don't use _FMT if there's no formatting going on

 drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 49 +++++++++++---------
 1 file changed, 27 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
index 0d19b09497a0..46b69166e74a 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
@@ -362,13 +362,16 @@ static int xgbe_set_coalesce(struct net_device *netdev,
 
 	/* Check the bounds of values for Rx */
 	if (rx_riwt > XGMAC_MAX_DMA_RIWT) {
-		netdev_err(netdev, "rx-usec is limited to %d usecs\n",
-			   hw_if->riwt_to_usec(pdata, XGMAC_MAX_DMA_RIWT));
+		NL_SET_ERR_MSG_FMT_MOD(extack,
+				       "rx-usec is limited to %d usecs",
+				       hw_if->riwt_to_usec(pdata,
+							   XGMAC_MAX_DMA_RIWT));
 		return -EINVAL;
 	}
 	if (rx_frames > pdata->rx_desc_count) {
-		netdev_err(netdev, "rx-frames is limited to %d frames\n",
-			   pdata->rx_desc_count);
+		NL_SET_ERR_MSG_FMT_MOD(extack,
+				       "rx-frames is limited to %d frames",
+				       pdata->rx_desc_count);
 		return -EINVAL;
 	}
 
@@ -377,8 +380,7 @@ static int xgbe_set_coalesce(struct net_device *netdev,
 
 	/* Check the bounds of values for Tx */
 	if (!tx_usecs) {
-		NL_SET_ERR_MSG_FMT_MOD(extack,
-				       "tx-usecs must not be 0");
+		NL_SET_ERR_MSG_MOD(extack, "tx-usecs must not be 0");
 		return -EINVAL;
 	}
 	if (tx_usecs > XGMAC_MAX_COAL_TX_TICK) {
@@ -387,8 +389,9 @@ static int xgbe_set_coalesce(struct net_device *netdev,
 		return -EINVAL;
 	}
 	if (tx_frames > pdata->tx_desc_count) {
-		netdev_err(netdev, "tx-frames is limited to %d frames\n",
-			   pdata->tx_desc_count);
+		NL_SET_ERR_MSG_FMT_MOD(extack,
+				       "tx-frames is limited to %d frames",
+				       pdata->tx_desc_count);
 		return -EINVAL;
 	}
 
@@ -474,7 +477,7 @@ static int xgbe_set_rxfh(struct net_device *netdev,
 
 	if (rxfh->hfunc != ETH_RSS_HASH_NO_CHANGE &&
 	    rxfh->hfunc != ETH_RSS_HASH_TOP) {
-		netdev_err(netdev, "unsupported hash function\n");
+		NL_SET_ERR_MSG_MOD(extack, "unsupported hash function");
 		return -EOPNOTSUPP;
 	}
 
@@ -561,37 +564,39 @@ static int xgbe_set_ringparam(struct net_device *netdev,
 	unsigned int rx, tx;
 
 	if (ringparam->rx_mini_pending || ringparam->rx_jumbo_pending) {
-		netdev_err(netdev, "unsupported ring parameter\n");
+		NL_SET_ERR_MSG_MOD(extack, "unsupported ring parameter");
 		return -EINVAL;
 	}
 
 	if ((ringparam->rx_pending < XGBE_RX_DESC_CNT_MIN) ||
 	    (ringparam->rx_pending > XGBE_RX_DESC_CNT_MAX)) {
-		netdev_err(netdev,
-			   "rx ring parameter must be between %u and %u\n",
-			   XGBE_RX_DESC_CNT_MIN, XGBE_RX_DESC_CNT_MAX);
+		NL_SET_ERR_MSG_FMT_MOD(extack,
+				       "rx ring parameter must be between %u and %u",
+				       XGBE_RX_DESC_CNT_MIN,
+				       XGBE_RX_DESC_CNT_MAX);
 		return -EINVAL;
 	}
 
 	if ((ringparam->tx_pending < XGBE_TX_DESC_CNT_MIN) ||
 	    (ringparam->tx_pending > XGBE_TX_DESC_CNT_MAX)) {
-		netdev_err(netdev,
-			   "tx ring parameter must be between %u and %u\n",
-			   XGBE_TX_DESC_CNT_MIN, XGBE_TX_DESC_CNT_MAX);
+		NL_SET_ERR_MSG_FMT_MOD(extack,
+				       "tx ring parameter must be between %u and %u",
+				       XGBE_TX_DESC_CNT_MIN,
+				       XGBE_TX_DESC_CNT_MAX);
 		return -EINVAL;
 	}
 
 	rx = __rounddown_pow_of_two(ringparam->rx_pending);
 	if (rx != ringparam->rx_pending)
-		netdev_notice(netdev,
-			      "rx ring parameter rounded to power of two: %u\n",
-			      rx);
+		NL_SET_ERR_MSG_FMT_MOD(extack,
+				       "rx ring parameter rounded to power of two: %u",
+				       rx);
 
 	tx = __rounddown_pow_of_two(ringparam->tx_pending);
 	if (tx != ringparam->tx_pending)
-		netdev_notice(netdev,
-			      "tx ring parameter rounded to power of two: %u\n",
-			      tx);
+		NL_SET_ERR_MSG_FMT_MOD(extack,
+				       "tx ring parameter rounded to power of two: %u",
+				       tx);
 
 	if ((rx == pdata->rx_desc_count) &&
 	    (tx == pdata->tx_desc_count))
-- 
2.34.1


             reply	other threads:[~2026-01-14  4:30 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-14  4:29 Raju Rangoju [this message]
2026-01-14 11:25 ` [PATCH net-next v2] xgbe: Use netlink extack to report errors to ethtool Vadim Fedorenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260114042927.1745503-1-Raju.Rangoju@amd.com \
    --to=raju.rangoju@amd.com \
    --cc=Shyam-sundar.S-k@amd.com \
    --cc=Vishal.Badole@amd.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox