public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: Suraj Gupta <suraj.gupta2@amd.com>
To: <mturquette@baylibre.com>, <sboyd@kernel.org>,
	<radhey.shyam.pandey@amd.com>, <andrew+netdev@lunn.ch>,
	<davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
	<pabeni@redhat.com>, <michal.simek@amd.com>
Cc: <sean.anderson@linux.dev>, <linux@armlinux.org.uk>,
	<linux-clk@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<netdev@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>,
	<bmasney@redhat.com>
Subject: [PATCH V3 2/2] net: xilinx: axienet:  Use devres for resource management in probe path
Date: Sat, 17 Jan 2026 00:57:24 +0530	[thread overview]
Message-ID: <20260116192725.972966-3-suraj.gupta2@amd.com> (raw)
In-Reply-To: <20260116192725.972966-1-suraj.gupta2@amd.com>

From: Sean Anderson <sean.anderson@linux.dev>

Transition axienet_probe() to managed resource allocation using devm_*
APIs for network device and clock handling, while improving error paths
with dev_err_probe(). This eliminates the need for manual resource
cleanup during probe failures and streamlines the remove() function.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Co-developed-by: Suraj Gupta <suraj.gupta2@amd.com>
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
---
 .../net/ethernet/xilinx/xilinx_axienet_main.c | 83 ++++++-------------
 1 file changed, 27 insertions(+), 56 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 284031fb2e2c..998bacd508b8 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -2787,7 +2787,7 @@ static int axienet_probe(struct platform_device *pdev)
 	int addr_width = 32;
 	u32 value;
 
-	ndev = alloc_etherdev(sizeof(*lp));
+	ndev = devm_alloc_etherdev(&pdev->dev, sizeof(*lp));
 	if (!ndev)
 		return -ENOMEM;
 
@@ -2815,41 +2815,32 @@ static int axienet_probe(struct platform_device *pdev)
 	seqcount_mutex_init(&lp->hw_stats_seqcount, &lp->stats_lock);
 	INIT_DEFERRABLE_WORK(&lp->stats_work, axienet_refresh_stats);
 
-	lp->axi_clk = devm_clk_get_optional(&pdev->dev, "s_axi_lite_clk");
+	lp->axi_clk = devm_clk_get_optional_enabled(&pdev->dev,
+						    "s_axi_lite_clk");
 	if (!lp->axi_clk) {
 		/* For backward compatibility, if named AXI clock is not present,
 		 * treat the first clock specified as the AXI clock.
 		 */
-		lp->axi_clk = devm_clk_get_optional(&pdev->dev, NULL);
-	}
-	if (IS_ERR(lp->axi_clk)) {
-		ret = PTR_ERR(lp->axi_clk);
-		goto free_netdev;
-	}
-	ret = clk_prepare_enable(lp->axi_clk);
-	if (ret) {
-		dev_err(&pdev->dev, "Unable to enable AXI clock: %d\n", ret);
-		goto free_netdev;
+		lp->axi_clk = devm_clk_get_optional_enabled(&pdev->dev, NULL);
 	}
+	if (IS_ERR(lp->axi_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(lp->axi_clk),
+				     "could not get AXI clock\n");
 
 	lp->misc_clks[0].id = "axis_clk";
 	lp->misc_clks[1].id = "ref_clk";
 	lp->misc_clks[2].id = "mgt_clk";
 
-	ret = devm_clk_bulk_get_optional(&pdev->dev, XAE_NUM_MISC_CLOCKS, lp->misc_clks);
-	if (ret)
-		goto cleanup_clk;
-
-	ret = clk_bulk_prepare_enable(XAE_NUM_MISC_CLOCKS, lp->misc_clks);
+	ret = devm_clk_bulk_get_optional_enable(&pdev->dev, XAE_NUM_MISC_CLOCKS,
+						lp->misc_clks);
 	if (ret)
-		goto cleanup_clk;
+		return dev_err_probe(&pdev->dev, ret,
+				     "could not get/enable misc. clocks\n");
 
 	/* Map device registers */
 	lp->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &ethres);
-	if (IS_ERR(lp->regs)) {
-		ret = PTR_ERR(lp->regs);
-		goto cleanup_clk;
-	}
+	if (IS_ERR(lp->regs))
+		return PTR_ERR(lp->regs);
 	lp->regs_start = ethres->start;
 
 	/* Setup checksum offload, but default to off if not specified */
@@ -2918,19 +2909,17 @@ static int axienet_probe(struct platform_device *pdev)
 			lp->phy_mode = PHY_INTERFACE_MODE_1000BASEX;
 			break;
 		default:
-			ret = -EINVAL;
-			goto cleanup_clk;
+			return -EINVAL;
 		}
 	} else {
 		ret = of_get_phy_mode(pdev->dev.of_node, &lp->phy_mode);
 		if (ret)
-			goto cleanup_clk;
+			return ret;
 	}
 	if (lp->switch_x_sgmii && lp->phy_mode != PHY_INTERFACE_MODE_SGMII &&
 	    lp->phy_mode != PHY_INTERFACE_MODE_1000BASEX) {
 		dev_err(&pdev->dev, "xlnx,switch-x-sgmii only supported with SGMII or 1000BaseX\n");
-		ret = -EINVAL;
-		goto cleanup_clk;
+		return -EINVAL;
 	}
 
 	if (!of_property_present(pdev->dev.of_node, "dmas")) {
@@ -2945,7 +2934,7 @@ static int axienet_probe(struct platform_device *pdev)
 				dev_err(&pdev->dev,
 					"unable to get DMA resource\n");
 				of_node_put(np);
-				goto cleanup_clk;
+				return ret;
 			}
 			lp->dma_regs = devm_ioremap_resource(&pdev->dev,
 							     &dmares);
@@ -2962,19 +2951,17 @@ static int axienet_probe(struct platform_device *pdev)
 		}
 		if (IS_ERR(lp->dma_regs)) {
 			dev_err(&pdev->dev, "could not map DMA regs\n");
-			ret = PTR_ERR(lp->dma_regs);
-			goto cleanup_clk;
+			return PTR_ERR(lp->dma_regs);
 		}
 		if (lp->rx_irq <= 0 || lp->tx_irq <= 0) {
 			dev_err(&pdev->dev, "could not determine irqs\n");
-			ret = -ENOMEM;
-			goto cleanup_clk;
+			return -ENOMEM;
 		}
 
 		/* Reset core now that clocks are enabled, prior to accessing MDIO */
 		ret = __axienet_device_reset(lp);
 		if (ret)
-			goto cleanup_clk;
+			return ret;
 
 		/* Autodetect the need for 64-bit DMA pointers.
 		 * When the IP is configured for a bus width bigger than 32 bits,
@@ -3001,14 +2988,13 @@ static int axienet_probe(struct platform_device *pdev)
 		}
 		if (!IS_ENABLED(CONFIG_64BIT) && lp->features & XAE_FEATURE_DMA_64BIT) {
 			dev_err(&pdev->dev, "64-bit addressable DMA is not compatible with 32-bit architecture\n");
-			ret = -EINVAL;
-			goto cleanup_clk;
+			return -EINVAL;
 		}
 
 		ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(addr_width));
 		if (ret) {
 			dev_err(&pdev->dev, "No suitable DMA available\n");
-			goto cleanup_clk;
+			return ret;
 		}
 		netif_napi_add(ndev, &lp->napi_rx, axienet_rx_poll);
 		netif_napi_add(ndev, &lp->napi_tx, axienet_tx_poll);
@@ -3018,15 +3004,12 @@ static int axienet_probe(struct platform_device *pdev)
 
 		lp->eth_irq = platform_get_irq_optional(pdev, 0);
 		if (lp->eth_irq < 0 && lp->eth_irq != -ENXIO) {
-			ret = lp->eth_irq;
-			goto cleanup_clk;
+			return lp->eth_irq;
 		}
 		tx_chan = dma_request_chan(lp->dev, "tx_chan0");
-		if (IS_ERR(tx_chan)) {
-			ret = PTR_ERR(tx_chan);
-			dev_err_probe(lp->dev, ret, "No Ethernet DMA (TX) channel found\n");
-			goto cleanup_clk;
-		}
+		if (IS_ERR(tx_chan))
+			return dev_err_probe(lp->dev, PTR_ERR(tx_chan),
+					     "No Ethernet DMA (TX) channel found\n");
 
 		cfg.reset = 1;
 		/* As name says VDMA but it has support for DMA channel reset */
@@ -3034,7 +3017,7 @@ static int axienet_probe(struct platform_device *pdev)
 		if (ret < 0) {
 			dev_err(&pdev->dev, "Reset channel failed\n");
 			dma_release_channel(tx_chan);
-			goto cleanup_clk;
+			return ret;
 		}
 
 		dma_release_channel(tx_chan);
@@ -3139,13 +3122,6 @@ static int axienet_probe(struct platform_device *pdev)
 		put_device(&lp->pcs_phy->dev);
 	if (lp->mii_bus)
 		axienet_mdio_teardown(lp);
-cleanup_clk:
-	clk_bulk_disable_unprepare(XAE_NUM_MISC_CLOCKS, lp->misc_clks);
-	clk_disable_unprepare(lp->axi_clk);
-
-free_netdev:
-	free_netdev(ndev);
-
 	return ret;
 }
 
@@ -3163,11 +3139,6 @@ static void axienet_remove(struct platform_device *pdev)
 		put_device(&lp->pcs_phy->dev);
 
 	axienet_mdio_teardown(lp);
-
-	clk_bulk_disable_unprepare(XAE_NUM_MISC_CLOCKS, lp->misc_clks);
-	clk_disable_unprepare(lp->axi_clk);
-
-	free_netdev(ndev);
 }
 
 static void axienet_shutdown(struct platform_device *pdev)
-- 
2.25.1


  parent reply	other threads:[~2026-01-16 19:27 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-16 19:27 [PATCH V3 0/2] Add devm_clk_bulk_get_optional_enable() helper and use in AXI Ethernet driver Suraj Gupta
2026-01-16 19:27 ` [PATCH V3 1/2] clk: Add devm_clk_bulk_get_optional_enable() helper Suraj Gupta
2026-01-21  2:42   ` Jakub Kicinski
2026-01-21  3:50   ` Stephen Boyd
2026-01-16 19:27 ` Suraj Gupta [this message]
2026-01-22  3:10 ` [PATCH V3 0/2] Add devm_clk_bulk_get_optional_enable() helper and use in AXI Ethernet driver patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260116192725.972966-3-suraj.gupta2@amd.com \
    --to=suraj.gupta2@amd.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=bmasney@redhat.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=michal.simek@amd.com \
    --cc=mturquette@baylibre.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=radhey.shyam.pandey@amd.com \
    --cc=sboyd@kernel.org \
    --cc=sean.anderson@linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox