From: Tom Herbert <tom@herbertland.com>
To: davem@davemloft.net, kuba@kernel.org, netdev@vger.kernel.org,
justin.iurman@uliege.be
Cc: Tom Herbert <tom@herbertland.com>
Subject: [PATCH net-next v5 1/7] ipv6: Check of max HBH or DestOp sysctl is zero and drop if it is
Date: Mon, 26 Jan 2026 11:48:20 -0800 [thread overview]
Message-ID: <20260126194826.236075-2-tom@herbertland.com> (raw)
In-Reply-To: <20260126194826.236075-1-tom@herbertland.com>
In IPv6 Destination options processing function check if
net->ipv6.sysctl.max_dst_opts_cnt is zero up front. If it is zero then
drop the packet since Destination Options processing is disabled.
Similarly, in IPv6 hop-by-hop options processing function check if
net->ipv6.sysctl.max_hbh_opts_cnt is zero up front. If it is zero then
drop the packet since Hop-by-Hop Options processing is disabled.
Signed-off-by: Tom Herbert <tom@herbertland.com>
---
net/ipv6/exthdrs.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index 54088fa0c09d..b9d186784b96 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -301,9 +301,11 @@ static int ipv6_destopt_rcv(struct sk_buff *skb)
#endif
struct dst_entry *dst = skb_dst(skb);
struct net *net = dev_net(skb->dev);
- int extlen;
+ int extlen, max_opts_cnt;
- if (!pskb_may_pull(skb, skb_transport_offset(skb) + 8) ||
+ max_opts_cnt = READ_ONCE(net->ipv6.sysctl.max_dst_opts_cnt);
+ if (!max_opts_cnt ||
+ !pskb_may_pull(skb, skb_transport_offset(skb) + 8) ||
!pskb_may_pull(skb, (skb_transport_offset(skb) +
((skb_transport_header(skb)[1] + 1) << 3)))) {
__IP6_INC_STATS(dev_net(dst_dev(dst)), idev,
@@ -322,8 +324,7 @@ static int ipv6_destopt_rcv(struct sk_buff *skb)
dstbuf = opt->dst1;
#endif
- if (ip6_parse_tlv(false, skb,
- READ_ONCE(net->ipv6.sysctl.max_dst_opts_cnt))) {
+ if (ip6_parse_tlv(false, skb, max_opts_cnt)) {
skb->transport_header += extlen;
opt = IP6CB(skb);
#if IS_ENABLED(CONFIG_IPV6_MIP6)
@@ -1033,7 +1034,7 @@ int ipv6_parse_hopopts(struct sk_buff *skb)
{
struct inet6_skb_parm *opt = IP6CB(skb);
struct net *net = dev_net(skb->dev);
- int extlen;
+ int extlen, max_opts_cnt;
/*
* skb_network_header(skb) is equal to skb->data, and
@@ -1041,7 +1042,9 @@ int ipv6_parse_hopopts(struct sk_buff *skb)
* sizeof(struct ipv6hdr) by definition of
* hop-by-hop options.
*/
- if (!pskb_may_pull(skb, sizeof(struct ipv6hdr) + 8) ||
+ max_opts_cnt = READ_ONCE(net->ipv6.sysctl.max_hbh_opts_cnt);
+ if (!max_opts_cnt ||
+ !pskb_may_pull(skb, sizeof(struct ipv6hdr) + 8) ||
!pskb_may_pull(skb, (sizeof(struct ipv6hdr) +
((skb_transport_header(skb)[1] + 1) << 3)))) {
fail_and_free:
@@ -1054,8 +1057,7 @@ int ipv6_parse_hopopts(struct sk_buff *skb)
goto fail_and_free;
opt->flags |= IP6SKB_HOPBYHOP;
- if (ip6_parse_tlv(true, skb,
- READ_ONCE(net->ipv6.sysctl.max_hbh_opts_cnt))) {
+ if (ip6_parse_tlv(true, skb, max_opts_cnt)) {
skb->transport_header += extlen;
opt = IP6CB(skb);
opt->nhoff = sizeof(struct ipv6hdr);
--
2.43.0
next prev parent reply other threads:[~2026-01-26 19:48 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-26 19:48 [PATCH net-next v5 0/7] ipv6: Address ext hdr DoS vulnerabilities Tom Herbert
2026-01-26 19:48 ` Tom Herbert [this message]
2026-01-27 17:49 ` [PATCH net-next v5 1/7] ipv6: Check of max HBH or DestOp sysctl is zero and drop if it is Justin Iurman
2026-01-27 17:50 ` Justin Iurman
2026-01-26 19:48 ` [PATCH net-next v5 2/7] ipv6: Cleanup IPv6 TLV definitions Tom Herbert
2026-01-27 17:51 ` Justin Iurman
2026-01-29 5:30 ` Willem de Bruijn
2026-01-29 18:13 ` Justin Iurman
2026-01-29 19:01 ` Willem de Bruijn
2026-01-30 17:22 ` Tom Herbert
2026-02-01 8:48 ` Justin Iurman
2026-02-02 22:37 ` Tom Herbert
2026-01-26 19:48 ` [PATCH net-next v5 3/7] ipv6: Add case for IPV6_TLV_TNL_ENCAP_LIMIT in EH TLV switch Tom Herbert
2026-01-27 17:52 ` Justin Iurman
2026-01-29 5:31 ` Willem de Bruijn
2026-01-26 19:48 ` [PATCH net-next v5 4/7] ipv6: Set HBH and DestOpt limits to 2 Tom Herbert
2026-01-27 17:55 ` Justin Iurman
2026-01-26 19:48 ` [PATCH net-next v5 5/7] ipv6: Document defaults for max_{dst|hbh}_opts_number sysctls Tom Herbert
2026-01-27 17:57 ` Justin Iurman
2026-01-26 19:48 ` [PATCH net-next v5 6/7] ipv6: Enforce Extension Header ordering Tom Herbert
2026-01-27 19:48 ` Justin Iurman
2026-01-29 5:18 ` Willem de Bruijn
2026-01-29 18:07 ` Justin Iurman
2026-01-29 19:05 ` Willem de Bruijn
2026-01-29 20:13 ` Justin Iurman
2026-01-30 17:06 ` Tom Herbert
2026-01-31 17:24 ` Willem de Bruijn
2026-02-02 22:21 ` Tom Herbert
2026-01-26 19:48 ` [PATCH net-next v5 7/7] ipv6: Document enforce_ext_hdr_order sysctl Tom Herbert
2026-01-27 18:00 ` Justin Iurman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260126194826.236075-2-tom@herbertland.com \
--to=tom@herbertland.com \
--cc=davem@davemloft.net \
--cc=justin.iurman@uliege.be \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox