From: Tom Herbert <tom@herbertland.com>
To: davem@davemloft.net, kuba@kernel.org, netdev@vger.kernel.org,
justin.iurman@uliege.be
Cc: Tom Herbert <tom@herbertland.com>
Subject: [PATCH net-next v5 6/7] ipv6: Enforce Extension Header ordering
Date: Mon, 26 Jan 2026 11:48:25 -0800 [thread overview]
Message-ID: <20260126194826.236075-7-tom@herbertland.com> (raw)
In-Reply-To: <20260126194826.236075-1-tom@herbertland.com>
RFC8200 highly recommends that different Extension Headers be send in
a prescibed order and all Extension Header types occur at most once
in a packet with the exception of Destination Options that may
occur twice. This patch enforces the ordering be folowed in received
packets.
The allowed order of Extension Headers is:
IPv6 header
Hop-by-Hop Options header
Destination Options before the Routing Header
Routing header
Fragment header
Authentication header
Encapsulating Security Payload header
Destination Options header
Upper-Layer header
Each Extension Header may be present only once in a packet.
net.ipv6.enforce_ext_hdr_order is a sysctl to enable or disable
enforcement of xtension Header order. If it is set to zero then
Extension Header order and number of occurences is not checked
in receive processeing (except for Hop-by-Hop Options that
must be the first Extension Header and can only occur once in
a packet.
Signed-off-by: Tom Herbert <tom@herbertland.com>
---
include/net/netns/ipv6.h | 1 +
include/net/protocol.h | 14 +++++++++++++
net/ipv6/af_inet6.c | 1 +
net/ipv6/exthdrs.c | 2 ++
net/ipv6/ip6_input.c | 42 ++++++++++++++++++++++++++++++++++++++
net/ipv6/reassembly.c | 1 +
net/ipv6/sysctl_net_ipv6.c | 7 +++++++
net/ipv6/xfrm6_protocol.c | 2 ++
8 files changed, 70 insertions(+)
diff --git a/include/net/netns/ipv6.h b/include/net/netns/ipv6.h
index 34bdb1308e8f..2db56718ea60 100644
--- a/include/net/netns/ipv6.h
+++ b/include/net/netns/ipv6.h
@@ -61,6 +61,7 @@ struct netns_sysctl_ipv6 {
u8 fib_notify_on_flag_change;
u8 icmpv6_error_anycast_as_unicast;
u8 icmpv6_errors_extension_mask;
+ u8 enforce_ext_hdr_order;
};
struct netns_ipv6 {
diff --git a/include/net/protocol.h b/include/net/protocol.h
index b2499f88f8f8..0f1676625570 100644
--- a/include/net/protocol.h
+++ b/include/net/protocol.h
@@ -50,6 +50,19 @@ struct net_protocol {
};
#if IS_ENABLED(CONFIG_IPV6)
+
+/* Order of extension headers as prescribed in RFC8200. The ordering and
+ * number of extension headers in a packet can be enforced in IPv6 receive
+ * processing.
+ */
+#define IPV6_EXT_HDR_ORDER_HOP BIT(0)
+#define IPV6_EXT_HDR_ORDER_DEST_BEFORE_RH BIT(1)
+#define IPV6_EXT_HDR_ORDER_ROUTING BIT(2)
+#define IPV6_EXT_HDR_ORDER_FRAGMENT BIT(3)
+#define IPV6_EXT_HDR_ORDER_AUTH BIT(4)
+#define IPV6_EXT_HDR_ORDER_ESP BIT(5)
+#define IPV6_EXT_HDR_ORDER_DEST BIT(6)
+
struct inet6_protocol {
int (*handler)(struct sk_buff *skb);
@@ -61,6 +74,7 @@ struct inet6_protocol {
unsigned int flags; /* INET6_PROTO_xxx */
u32 secret;
+ u32 ext_hdr_order;
};
#define INET6_PROTO_NOPOLICY 0x1
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index bd29840659f3..43097360ce64 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -980,6 +980,7 @@ static int __net_init inet6_net_init(struct net *net)
net->ipv6.sysctl.max_dst_opts_len = IP6_DEFAULT_MAX_DST_OPTS_LEN;
net->ipv6.sysctl.max_hbh_opts_len = IP6_DEFAULT_MAX_HBH_OPTS_LEN;
net->ipv6.sysctl.fib_notify_on_flag_change = 0;
+ net->ipv6.sysctl.enforce_ext_hdr_order = 1;
atomic_set(&net->ipv6.fib6_sernum, 1);
net->ipv6.sysctl.ioam6_id = IOAM6_DEFAULT_ID;
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index 6925cfad94d2..4ab94c8cddb9 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -845,11 +845,13 @@ static int ipv6_rthdr_rcv(struct sk_buff *skb)
static const struct inet6_protocol rthdr_protocol = {
.handler = ipv6_rthdr_rcv,
.flags = INET6_PROTO_NOPOLICY,
+ .ext_hdr_order = IPV6_EXT_HDR_ORDER_ROUTING,
};
static const struct inet6_protocol destopt_protocol = {
.handler = ipv6_destopt_rcv,
.flags = INET6_PROTO_NOPOLICY,
+ .ext_hdr_order = IPV6_EXT_HDR_ORDER_DEST,
};
static const struct inet6_protocol nodata_protocol = {
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index 168ec07e31cc..ab921c0a94af 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -355,6 +355,27 @@ void ipv6_list_rcv(struct list_head *head, struct packet_type *pt,
ip6_sublist_rcv(&sublist, curr_dev, curr_net);
}
+static u32 check_dst_opts_before_rh(const struct inet6_protocol *ipprot,
+ u32 ext_hdrs)
+{
+ /* Check if Destination Options before the Routing Header are
+ * present.
+ */
+ if (ipprot->ext_hdr_order != IPV6_EXT_HDR_ORDER_ROUTING ||
+ !(ext_hdrs | IPV6_EXT_HDR_ORDER_DEST))
+ return ext_hdrs;
+
+ /* We have Destination Options before the Routing Header. Set
+ * the mask of recived extension headers to reflect that. We promote
+ * the bit from indicating just Destination Options present to
+ * Destination Options before the Routing Header being present
+ */
+ ext_hdrs = (ext_hdrs & ~IPV6_EXT_HDR_ORDER_DEST) |
+ IPV6_EXT_HDR_ORDER_DEST_BEFORE_RH;
+
+ return ext_hdrs;
+}
+
INDIRECT_CALLABLE_DECLARE(int tcp_v6_rcv(struct sk_buff *));
/*
@@ -366,6 +387,7 @@ void ip6_protocol_deliver_rcu(struct net *net, struct sk_buff *skb, int nexthdr,
const struct inet6_protocol *ipprot;
struct inet6_dev *idev;
unsigned int nhoff;
+ u32 ext_hdrs = 0;
SKB_DR(reason);
bool raw;
@@ -427,6 +449,26 @@ void ip6_protocol_deliver_rcu(struct net *net, struct sk_buff *skb, int nexthdr,
goto discard;
}
}
+
+ if (ipprot->ext_hdr_order &&
+ READ_ONCE(net->ipv6.sysctl.enforce_ext_hdr_order)) {
+ /* The protocol is an extension header and EH ordering
+ * is being enforced. Discard packet if we've already
+ * seen this EH or one that is lower in the order list
+ */
+ if (ipprot->ext_hdr_order <= ext_hdrs) {
+ /* Check if there's Destination Options
+ * before the Routing Header
+ */
+ ext_hdrs = check_dst_opts_before_rh(ipprot,
+ ext_hdrs);
+ if (ipprot->ext_hdr_order <= ext_hdrs)
+ goto discard;
+ }
+
+ ext_hdrs |= ipprot->ext_hdr_order;
+ }
+
if (!(ipprot->flags & INET6_PROTO_NOPOLICY)) {
if (!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) {
SKB_DR_SET(reason, XFRM_POLICY);
diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index 25ec8001898d..91dba72c5a3c 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -414,6 +414,7 @@ static int ipv6_frag_rcv(struct sk_buff *skb)
static const struct inet6_protocol frag_protocol = {
.handler = ipv6_frag_rcv,
.flags = INET6_PROTO_NOPOLICY,
+ .ext_hdr_order = IPV6_EXT_HDR_ORDER_FRAGMENT,
};
#ifdef CONFIG_SYSCTL
diff --git a/net/ipv6/sysctl_net_ipv6.c b/net/ipv6/sysctl_net_ipv6.c
index d2cd33e2698d..543b6acdb11d 100644
--- a/net/ipv6/sysctl_net_ipv6.c
+++ b/net/ipv6/sysctl_net_ipv6.c
@@ -213,6 +213,13 @@ static struct ctl_table ipv6_table_template[] = {
.proc_handler = proc_doulongvec_minmax,
.extra2 = &ioam6_id_wide_max,
},
+ {
+ .procname = "enforce_ext_hdr_order",
+ .data = &init_net.ipv6.sysctl.enforce_ext_hdr_order,
+ .maxlen = sizeof(u8),
+ .mode = 0644,
+ .proc_handler = proc_dou8vec_minmax,
+ },
};
static struct ctl_table ipv6_rotable[] = {
diff --git a/net/ipv6/xfrm6_protocol.c b/net/ipv6/xfrm6_protocol.c
index ea2f805d3b01..5826edf67f64 100644
--- a/net/ipv6/xfrm6_protocol.c
+++ b/net/ipv6/xfrm6_protocol.c
@@ -197,12 +197,14 @@ static const struct inet6_protocol esp6_protocol = {
.handler = xfrm6_esp_rcv,
.err_handler = xfrm6_esp_err,
.flags = INET6_PROTO_NOPOLICY,
+ .ext_hdr_order = IPV6_EXT_HDR_ORDER_ESP,
};
static const struct inet6_protocol ah6_protocol = {
.handler = xfrm6_ah_rcv,
.err_handler = xfrm6_ah_err,
.flags = INET6_PROTO_NOPOLICY,
+ .ext_hdr_order = IPV6_EXT_HDR_ORDER_AUTH
};
static const struct inet6_protocol ipcomp6_protocol = {
--
2.43.0
next prev parent reply other threads:[~2026-01-26 19:48 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-26 19:48 [PATCH net-next v5 0/7] ipv6: Address ext hdr DoS vulnerabilities Tom Herbert
2026-01-26 19:48 ` [PATCH net-next v5 1/7] ipv6: Check of max HBH or DestOp sysctl is zero and drop if it is Tom Herbert
2026-01-27 17:49 ` Justin Iurman
2026-01-27 17:50 ` Justin Iurman
2026-01-26 19:48 ` [PATCH net-next v5 2/7] ipv6: Cleanup IPv6 TLV definitions Tom Herbert
2026-01-27 17:51 ` Justin Iurman
2026-01-29 5:30 ` Willem de Bruijn
2026-01-29 18:13 ` Justin Iurman
2026-01-29 19:01 ` Willem de Bruijn
2026-01-30 17:22 ` Tom Herbert
2026-02-01 8:48 ` Justin Iurman
2026-02-02 22:37 ` Tom Herbert
2026-01-26 19:48 ` [PATCH net-next v5 3/7] ipv6: Add case for IPV6_TLV_TNL_ENCAP_LIMIT in EH TLV switch Tom Herbert
2026-01-27 17:52 ` Justin Iurman
2026-01-29 5:31 ` Willem de Bruijn
2026-01-26 19:48 ` [PATCH net-next v5 4/7] ipv6: Set HBH and DestOpt limits to 2 Tom Herbert
2026-01-27 17:55 ` Justin Iurman
2026-01-26 19:48 ` [PATCH net-next v5 5/7] ipv6: Document defaults for max_{dst|hbh}_opts_number sysctls Tom Herbert
2026-01-27 17:57 ` Justin Iurman
2026-01-26 19:48 ` Tom Herbert [this message]
2026-01-27 19:48 ` [PATCH net-next v5 6/7] ipv6: Enforce Extension Header ordering Justin Iurman
2026-01-29 5:18 ` Willem de Bruijn
2026-01-29 18:07 ` Justin Iurman
2026-01-29 19:05 ` Willem de Bruijn
2026-01-29 20:13 ` Justin Iurman
2026-01-30 17:06 ` Tom Herbert
2026-01-31 17:24 ` Willem de Bruijn
2026-02-02 22:21 ` Tom Herbert
2026-01-26 19:48 ` [PATCH net-next v5 7/7] ipv6: Document enforce_ext_hdr_order sysctl Tom Herbert
2026-01-27 18:00 ` Justin Iurman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260126194826.236075-7-tom@herbertland.com \
--to=tom@herbertland.com \
--cc=davem@davemloft.net \
--cc=justin.iurman@uliege.be \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox