From: Biju <biju.das.au@gmail.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Richard Cochran <richardcochran@gmail.com>
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>,
Biju Das <biju.das.au@gmail.com>
Subject: [PATCH net-next 7/8] arm64: dts: renesas: r9a08g046: Add GBETH nodes
Date: Wed, 28 Jan 2026 12:58:44 +0000 [thread overview]
Message-ID: <20260128125850.425264-8-biju.das.jz@bp.renesas.com> (raw)
In-Reply-To: <20260128125850.425264-1-biju.das.jz@bp.renesas.com>
From: Biju Das <biju.das.jz@bp.renesas.com>
Renesas RZ/G3L SoC is equipped with 2x Synopsys DesignWare Ethernet
(10/100/1000 BASE) with TSN, IP block version 5.30. Add GBETH nodes
to R9A08G046 RZ/G3L SoC DTSI.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
arch/arm64/boot/dts/renesas/r9a08g046.dtsi | 237 +++++++++++++++++++++
1 file changed, 237 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r9a08g046.dtsi b/arch/arm64/boot/dts/renesas/r9a08g046.dtsi
index 0922ad642c67..231b118ecc62 100644
--- a/arch/arm64/boot/dts/renesas/r9a08g046.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a08g046.dtsi
@@ -228,6 +228,236 @@ sdhi1: mmc@11c10000 {
/* placeholder */
};
+ eth0: ethernet@11c30000 {
+ compatible = "renesas,r9a08g046-gbeth", "snps,dwmac-5.30a";
+ reg = <0 0x11c30000 0 0x10000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 81 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 83 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 91 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+ "rx-queue-0", "rx-queue-1", "rx-queue-2",
+ "rx-queue-3", "tx-queue-0", "tx-queue-1",
+ "tx-queue-2", "tx-queue-3", "ptp-pps-0",
+ "ptp-pps-1", "ptp-pps-2", "ptp-pps-3";
+ clocks = <&cpg CPG_MOD R9A08G046_ETH0_CLK_AXI>,
+ <&cpg CPG_MOD R9A08G046_ETH0_CLK_CHI>,
+ <&cpg CPG_MOD R9A08G046_ETH0_CLK_PTP_REF_I>,
+ <&cpg CPG_MOD R9A08G046_ETH0_CLK_TX_I>,
+ <&cpg CPG_MOD R9A08G046_ETH0_CLK_RX_I>,
+ <&cpg CPG_MOD R9A08G046_ETH0_CLK_TX_180_I>,
+ <&cpg CPG_MOD R9A08G046_ETH0_CLK_RX_180_I>,
+ <&cpg CPG_MOD R9A08G046_ETH0_CLK_RMII_I>;
+ clock-names = "stmmaceth", "pclk", "ptp_ref",
+ "tx", "rx", "tx-180", "rx-180",
+ "rmii";
+ resets = <&cpg R9A08G046_ETH0_ARESET_N>;
+ power-domains = <&cpg>;
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ rx-fifo-depth = <8192>;
+ tx-fifo-depth = <8192>;
+ snps,fixed-burst;
+ snps,no-pbl-x8;
+ snps,force_thresh_dma_mode;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,mtl-rx-config = <&mtl_rx_setup0>;
+ snps,mtl-tx-config = <&mtl_tx_setup0>;
+ snps,txpbl = <32>;
+ snps,rxpbl = <32>;
+ status = "disabled";
+
+ mdio0: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mtl_rx_setup0: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ snps,map-to-dma-channel = <0>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ snps,map-to-dma-channel = <1>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ snps,map-to-dma-channel = <2>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ snps,map-to-dma-channel = <3>;
+ };
+ };
+
+ mtl_tx_setup0: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+ snps,tx-sched-wrr;
+
+ queue0 {
+ snps,weight = <0x10>;
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,weight = <0x12>;
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ };
+
+ queue2 {
+ snps,weight = <0x14>;
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ };
+
+ queue3 {
+ snps,weight = <0x18>;
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ };
+ };
+ };
+
+ eth1: ethernet@11c40000 {
+ compatible = "renesas,r9a08g046-gbeth", "snps,dwmac-5.30a";
+ reg = <0 0x11c40000 0 0x10000>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 101 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 103 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 98 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 99 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 104 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 105 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 106 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 107 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+ "rx-queue-0", "rx-queue-1", "rx-queue-2",
+ "rx-queue-3", "tx-queue-0", "tx-queue-1",
+ "tx-queue-2", "tx-queue-3", "ptp-pps-0",
+ "ptp-pps-1", "ptp-pps-2", "ptp-pps-3";
+ clocks = <&cpg CPG_MOD R9A08G046_ETH1_CLK_AXI>,
+ <&cpg CPG_MOD R9A08G046_ETH1_CLK_CHI>,
+ <&cpg CPG_MOD R9A08G046_ETH1_CLK_PTP_REF_I>,
+ <&cpg CPG_MOD R9A08G046_ETH1_CLK_TX_I>,
+ <&cpg CPG_MOD R9A08G046_ETH1_CLK_RX_I>,
+ <&cpg CPG_MOD R9A08G046_ETH1_CLK_TX_180_I>,
+ <&cpg CPG_MOD R9A08G046_ETH1_CLK_RX_180_I>,
+ <&cpg CPG_MOD R9A08G046_ETH1_CLK_RMII_I>;
+ clock-names = "stmmaceth", "pclk", "ptp_ref",
+ "tx", "rx", "tx-180", "rx-180",
+ "rmii";
+ resets = <&cpg R9A08G046_ETH1_ARESET_N>;
+ power-domains = <&cpg>;
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ rx-fifo-depth = <8192>;
+ tx-fifo-depth = <8192>;
+ snps,fixed-burst;
+ snps,no-pbl-x8;
+ snps,force_thresh_dma_mode;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,mtl-rx-config = <&mtl_rx_setup1>;
+ snps,mtl-tx-config = <&mtl_tx_setup1>;
+ snps,txpbl = <32>;
+ snps,rxpbl = <32>;
+ status = "disabled";
+
+ mdio1: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mtl_rx_setup1: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ snps,map-to-dma-channel = <0>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ snps,map-to-dma-channel = <1>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ snps,map-to-dma-channel = <2>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ snps,map-to-dma-channel = <3>;
+ };
+ };
+
+ mtl_tx_setup1: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+ snps,tx-sched-wrr;
+
+ queue0 {
+ snps,weight = <0x10>;
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,weight = <0x12>;
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ };
+
+ queue2 {
+ snps,weight = <0x14>;
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ };
+
+ queue3 {
+ snps,weight = <0x18>;
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ };
+ };
+ };
+
gic: interrupt-controller@12400000 {
compatible = "arm,gic-v3";
reg = <0x0 0x12400000 0 0x20000>,
@@ -239,6 +469,13 @@ gic: interrupt-controller@12400000 {
};
};
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,lpi_en;
+ snps,wr_osr_lmt = <0xf>;
+ snps,rd_osr_lmt = <0xf>;
+ snps,blen = <16 8 4 0 0 0 0>;
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
--
2.43.0
next prev parent reply other threads:[~2026-01-28 12:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-28 12:58 [PATCH net-next 0/8] Add support for Renesas RZ/G3L GBETH Biju
2026-01-28 12:58 ` [PATCH net-next 1/8] dt-bindings: net: renesas,rzv2h-gbeth: Document Renesas RZ/G3L SoC Biju
2026-01-28 17:41 ` Conor Dooley
2026-01-28 12:58 ` [PATCH net-next 2/8] net: stmmac: dwmac-renesas-gbeth: Add support for " Biju
2026-01-28 12:58 ` Biju [this message]
2026-01-28 12:58 ` [PATCH net-next 8/8] arm64: dts: renesas: rzg3l-smarc-som: Enable eth0 (GBETH) interface Biju
2026-01-28 18:41 ` [PATCH net-next 0/8] Add support for Renesas RZ/G3L GBETH Geert Uytterhoeven
2026-01-29 6:48 ` Biju Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260128125850.425264-8-biju.das.jz@bp.renesas.com \
--to=biju.das.au@gmail.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=richardcochran@gmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox