From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: davem@davemloft.net, Andrew Lunn <andrew@lunn.ch>,
Jakub Kicinski <kuba@kernel.org>,
Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>,
Russell King <linux@armlinux.org.uk>,
Heiner Kallweit <hkallweit1@gmail.com>
Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
thomas.petazzoni@bootlin.com,
"Christophe Leroy" <christophe.leroy@csgroup.eu>,
"Herve Codina" <herve.codina@bootlin.com>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Vladimir Oltean" <vladimir.oltean@nxp.com>,
"Köry Maincent" <kory.maincent@bootlin.com>,
"Marek Behún" <kabel@kernel.org>,
"Oleksij Rempel" <o.rempel@pengutronix.de>,
"Nicolò Veronese" <nicveronese@gmail.com>,
"Simon Horman" <horms@kernel.org>,
mwojtas@chromium.org,
"Romain Gantois" <romain.gantois@bootlin.com>,
"Daniel Golle" <daniel@makrotopia.org>,
"Dimitri Fedrau" <dimitri.fedrau@liebherr.com>
Subject: [PATCH net-next v2 11/12] netlink: specs: Add ethernet port listing with ethtool
Date: Wed, 28 Jan 2026 21:45:24 +0100 [thread overview]
Message-ID: <20260128204526.170927-12-maxime.chevallier@bootlin.com> (raw)
In-Reply-To: <20260128204526.170927-1-maxime.chevallier@bootlin.com>
Ethernet network interfaces may have more than one front-facing port.
The phy_port infrastructure was introduced to keep track of
these ports, and allow userspace to know about the presence and
capability of these ports. Add a ethnl netlink message to report this
information.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
Documentation/netlink/specs/ethtool.yaml | 50 +++++++++++++++++++
Documentation/networking/ethtool-netlink.rst | 35 +++++++++++++
.../uapi/linux/ethtool_netlink_generated.h | 19 +++++++
3 files changed, 104 insertions(+)
diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml
index 0a2d2343f79a..f0f424009fb0 100644
--- a/Documentation/netlink/specs/ethtool.yaml
+++ b/Documentation/netlink/specs/ethtool.yaml
@@ -210,6 +210,10 @@ definitions:
-
name: discard
value: 31
+ -
+ name: port-type
+ type: enum
+ entries: [mdi, sfp]
attribute-sets:
-
@@ -1890,6 +1894,32 @@ attribute-sets:
name: link
type: nest
nested-attributes: mse-snapshot
+ -
+ name: port
+ attr-cnt-name: --ethtool-a-port-cnt
+ attributes:
+ -
+ name: header
+ type: nest
+ nested-attributes: header
+ -
+ name: id
+ type: u32
+ -
+ name: supported-modes
+ type: nest
+ nested-attributes: bitset
+ -
+ name: supported-interfaces
+ type: nest
+ nested-attributes: bitset
+ -
+ name: type
+ type: u8
+ enum: port-type
+ -
+ name: occupied
+ type: u8
operations:
enum-model: directional
@@ -2842,6 +2872,26 @@ operations:
- worst-channel
- link
dump: *mse-get-op
+ -
+ name: port-get
+ doc: Get ports attached to an interface
+
+ attribute-set: port
+
+ do: &port-get-op
+ request:
+ attributes:
+ - header
+ - id
+ reply:
+ attributes:
+ - header
+ - id
+ - supported-modes
+ - supported-interfaces
+ - type
+ - occupied
+ dump: *port-get-op
mcast-groups:
list:
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index af56c304cef4..68c447eaeb7a 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -2522,6 +2522,40 @@ Within each channel nest, only the metrics supported by the PHY will be present.
See ``struct phy_mse_snapshot`` kernel documentation in
``include/linux/phy.h``.
+PORT_GET
+========
+
+Retrieve information about the physical connection points of a network device,
+referred to as "ports". User needs to specify a PORT_ID for the DO operation,
+in which case the DO request returns information about that specific port.
+
+As there can be more than one port, the DUMP operation can be used to list the
+ports present on a given interface, by passing an interface index or name in
+the dump request.
+
+Request contents:
+
+==================================== ====== =================================
+ ``ETHTOOL_A_PORT_HEADER`` nested request header
+ ``ETHTOOL_A_PORT_ID`` u32 port id
+ ==================================== ====== ===============================
+
+Kernel response contents:
+
+ ===================================== ====== =============================
+ ``ETHTOOL_A_PORT_HEADER`` nested request header
+ ``ETHTOOL_A_PORT_ID`` u32 the port's unique identifier,
+ per netdevice.
+ ``ETHTOOL_A_PORT_SUPPORTED_MODES`` bitset bitset of supported linkmodes
+ ``ETHTOOL_A_PORT_SUPPORTED_INTERFACES`` bitset bitset of supported MII
+ interfaces
+ ``ETHTOOL_A_PORT_TYPE`` u8 the port type
+ ``ETHTOOL_A_PORT_OCCUPIED`` u8 for non-mdi ports, indicates
+ if the port is connected to
+ another device that could
+ expose a MDI
+ ===================================== ====== =============================
+
Request translation
===================
@@ -2632,4 +2666,5 @@ are netlink only.
n/a ``ETHTOOL_MSG_PHY_GET``
``SIOCGHWTSTAMP`` ``ETHTOOL_MSG_TSCONFIG_GET``
``SIOCSHWTSTAMP`` ``ETHTOOL_MSG_TSCONFIG_SET``
+ n/a ``ETHTOOL_MSG_PORT_GET``
=================================== =====================================
diff --git a/include/uapi/linux/ethtool_netlink_generated.h b/include/uapi/linux/ethtool_netlink_generated.h
index 556a0c834df5..7ccd864a6e38 100644
--- a/include/uapi/linux/ethtool_netlink_generated.h
+++ b/include/uapi/linux/ethtool_netlink_generated.h
@@ -78,6 +78,11 @@ enum ethtool_pse_event {
ETHTOOL_PSE_EVENT_SW_PW_CONTROL_ERROR = 64,
};
+enum ethtool_port_type {
+ ETHTOOL_PORT_TYPE_MDI,
+ ETHTOOL_PORT_TYPE_SFP,
+};
+
enum {
ETHTOOL_A_HEADER_UNSPEC,
ETHTOOL_A_HEADER_DEV_INDEX,
@@ -837,6 +842,18 @@ enum {
ETHTOOL_A_MSE_MAX = (__ETHTOOL_A_MSE_CNT - 1)
};
+enum {
+ ETHTOOL_A_PORT_HEADER = 1,
+ ETHTOOL_A_PORT_ID,
+ ETHTOOL_A_PORT_SUPPORTED_MODES,
+ ETHTOOL_A_PORT_SUPPORTED_INTERFACES,
+ ETHTOOL_A_PORT_TYPE,
+ ETHTOOL_A_PORT_OCCUPIED,
+
+ __ETHTOOL_A_PORT_CNT,
+ ETHTOOL_A_PORT_MAX = (__ETHTOOL_A_PORT_CNT - 1)
+};
+
enum {
ETHTOOL_MSG_USER_NONE = 0,
ETHTOOL_MSG_STRSET_GET = 1,
@@ -890,6 +907,7 @@ enum {
ETHTOOL_MSG_RSS_CREATE_ACT,
ETHTOOL_MSG_RSS_DELETE_ACT,
ETHTOOL_MSG_MSE_GET,
+ ETHTOOL_MSG_PORT_GET,
__ETHTOOL_MSG_USER_CNT,
ETHTOOL_MSG_USER_MAX = (__ETHTOOL_MSG_USER_CNT - 1)
@@ -951,6 +969,7 @@ enum {
ETHTOOL_MSG_RSS_CREATE_NTF,
ETHTOOL_MSG_RSS_DELETE_NTF,
ETHTOOL_MSG_MSE_GET_REPLY,
+ ETHTOOL_MSG_PORT_GET_REPLY,
__ETHTOOL_MSG_KERNEL_CNT,
ETHTOOL_MSG_KERNEL_MAX = (__ETHTOOL_MSG_KERNEL_CNT - 1)
--
2.49.0
next prev parent reply other threads:[~2026-01-28 20:46 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-28 20:45 [PATCH net-next v2 00/12] net: phy_port: SFP modules representation and phy_port listing Maxime Chevallier
2026-01-28 20:45 ` [PATCH net-next v2 01/12] net: phy: phy_port: Correctly recompute the port's linkmodes Maxime Chevallier
2026-01-30 4:00 ` [net-next,v2,01/12] " Jakub Kicinski
2026-01-28 20:45 ` [PATCH net-next v2 02/12] net: phy: phy_link_topology: Add a helper for opportunistic alloc Maxime Chevallier
2026-01-28 20:45 ` [PATCH net-next v2 03/12] net: phy: phy_link_topology: Track ports in phy_link_topology Maxime Chevallier
2026-01-30 4:00 ` [net-next,v2,03/12] " Jakub Kicinski
2026-01-28 20:45 ` [PATCH net-next v2 04/12] net: phylink: Register a phy_port for MAC-driven SFP busses Maxime Chevallier
2026-01-28 20:45 ` [PATCH net-next v2 05/12] net: phy: Create SFP phy_port before registering usptream Maxime Chevallier
2026-01-28 20:45 ` [PATCH net-next v2 06/12] net: sfp: Add a sfp-bus ops when connecting a module without PHY Maxime Chevallier
2026-01-28 20:45 ` [PATCH net-next v2 07/12] net: phy: Represent PHY-less SFP modules with phy_port Maxime Chevallier
2026-01-28 20:45 ` [PATCH net-next v2 08/12] net: phylink: " Maxime Chevallier
2026-01-30 4:00 ` [net-next,v2,08/12] " Jakub Kicinski
2026-01-28 20:45 ` [PATCH net-next v2 09/12] net: phy: phy_port: Store information about a MII port's occupancy Maxime Chevallier
2026-01-30 4:00 ` [net-next,v2,09/12] " Jakub Kicinski
2026-01-28 20:45 ` [PATCH net-next v2 10/12] net: phy: phy_link_topology: Add a helper to retrieve ports Maxime Chevallier
2026-01-28 20:45 ` Maxime Chevallier [this message]
2026-01-28 20:45 ` [PATCH net-next v2 12/12] net: ethtool: Introduce ethtool command to list ports Maxime Chevallier
2026-01-30 3:59 ` [PATCH net-next v2 00/12] net: phy_port: SFP modules representation and phy_port listing Jakub Kicinski
2026-01-30 8:21 ` Maxime Chevallier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260128204526.170927-12-maxime.chevallier@bootlin.com \
--to=maxime.chevallier@bootlin.com \
--cc=andrew@lunn.ch \
--cc=christophe.leroy@csgroup.eu \
--cc=daniel@makrotopia.org \
--cc=davem@davemloft.net \
--cc=dimitri.fedrau@liebherr.com \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=herve.codina@bootlin.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=kabel@kernel.org \
--cc=kory.maincent@bootlin.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mwojtas@chromium.org \
--cc=netdev@vger.kernel.org \
--cc=nicveronese@gmail.com \
--cc=o.rempel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=romain.gantois@bootlin.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox