From: Qingfang Deng <dqfext@gmail.com>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
linux-ppp@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: "Toke Høiland-Jørgensen" <toke@redhat.com>
Subject: [PATCH net-next v4] ppp: enable TX scatter-gather
Date: Thu, 29 Jan 2026 09:29:02 +0800 [thread overview]
Message-ID: <20260129012902.941-1-dqfext@gmail.com> (raw)
PPP channels using chan->direct_xmit prepend the PPP header to a skb and
call dev_queue_xmit() directly. In this mode the skb does not need to be
linear, but the PPP netdevice currently does not advertise
scatter-gather features, causing unnecessary linearization and
preventing GSO.
Enable NETIF_F_SG and NETIF_F_FRAGLIST on PPP devices. In case a linear
buffer is required (PPP compression, multilink, and channels without
direct_xmit), call skb_linearize() explicitly.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
---
v3 -> v4:
Always expose SG and FRAGLIST, and linearize the skb if necessary.
- https://lore.kernel.org/linux-ppp/20260123014214.225278-1-dqfext@gmail.com/
drivers/net/ppp/ppp_generic.c | 30 +++++++++++++++++++++++++-----
1 file changed, 25 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c
index f9f0f16c41d1..f8814d7be6f1 100644
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -1641,6 +1641,8 @@ static void ppp_setup(struct net_device *dev)
dev->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
dev->priv_destructor = ppp_dev_priv_destructor;
dev->pcpu_stat_type = NETDEV_PCPU_STAT_TSTATS;
+ dev->features = NETIF_F_SG | NETIF_F_FRAGLIST;
+ dev->hw_features = dev->features;
netif_keep_dst(dev);
}
@@ -1710,6 +1712,10 @@ pad_compress_skb(struct ppp *ppp, struct sk_buff *skb)
ppp->xcomp->comp_extra + ppp->dev->hard_header_len;
int compressor_skb_size = ppp->dev->mtu +
ppp->xcomp->comp_extra + PPP_HDRLEN;
+
+ if (skb_linearize(skb))
+ return NULL;
+
new_skb = alloc_skb(new_skb_size, GFP_ATOMIC);
if (!new_skb) {
if (net_ratelimit())
@@ -1797,6 +1803,10 @@ ppp_send_frame(struct ppp *ppp, struct sk_buff *skb)
case PPP_IP:
if (!ppp->vj || (ppp->flags & SC_COMP_TCP) == 0)
break;
+
+ if (skb_linearize(skb))
+ goto drop;
+
/* try to do VJ TCP header compression */
new_skb = alloc_skb(skb->len + ppp->dev->hard_header_len - 2,
GFP_ATOMIC);
@@ -1894,19 +1904,26 @@ ppp_push(struct ppp *ppp)
}
if ((ppp->flags & SC_MULTILINK) == 0) {
+ struct ppp_channel *chan;
/* not doing multilink: send it down the first channel */
list = list->next;
pch = list_entry(list, struct channel, clist);
spin_lock(&pch->downl);
- if (pch->chan) {
- if (pch->chan->ops->start_xmit(pch->chan, skb))
- ppp->xmit_pending = NULL;
- } else {
- /* channel got unregistered */
+ chan = pch->chan;
+ if (unlikely(!chan || (!chan->direct_xmit && skb_linearize(skb)))) {
+ /* channel got unregistered, or it requires a linear
+ * skb but linearization failed
+ */
kfree_skb(skb);
ppp->xmit_pending = NULL;
+ goto out;
}
+
+ if (chan->ops->start_xmit(chan, skb))
+ ppp->xmit_pending = NULL;
+
+out:
spin_unlock(&pch->downl);
return;
}
@@ -1991,6 +2008,8 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
return 0; /* can't take now, leave it in xmit_pending */
/* Do protocol field compression */
+ if (skb_linearize(skb))
+ goto err_linearize;
p = skb->data;
len = skb->len;
if (*p == 0 && mp_protocol_compress) {
@@ -2149,6 +2168,7 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
noskb:
spin_unlock(&pch->downl);
+ err_linearize:
if (ppp->debug & 1)
netdev_err(ppp->dev, "PPP: no memory (fragment)\n");
++ppp->dev->stats.tx_errors;
--
2.43.0
next reply other threads:[~2026-01-29 1:29 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-29 1:29 Qingfang Deng [this message]
2026-02-03 10:55 ` [PATCH net-next v4] ppp: enable TX scatter-gather Paolo Abeni
2026-02-03 15:08 ` Qingfang Deng
2026-02-03 16:33 ` Paolo Abeni
2026-02-05 9:20 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260129012902.941-1-dqfext@gmail.com \
--to=dqfext@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-ppp@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=toke@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox