From: Vimlesh Kumar <vimleshk@marvell.com>
To: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <sedara@marvell.com>, <srasheed@marvell.com>, <hgani@marvell.com>,
"Vimlesh Kumar" <vimleshk@marvell.com>,
Veerasenareddy Burru <vburru@marvell.com>,
Satananda Burla <sburla@marvell.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Subject: [PATCH RESEND net v3 3/3] octeon_ep_vf: ensure dbell BADDR updation
Date: Fri, 30 Jan 2026 14:15:47 +0000 [thread overview]
Message-ID: <20260130141549.827020-4-vimleshk@marvell.com> (raw)
In-Reply-To: <20260130141549.827020-1-vimleshk@marvell.com>
Make sure the OUT DBELL base address reflects the
latest values written to it.
Fix:
Add a wait until the OUT DBELL base address register
is updated with the DMA ring descriptor address,
and modify the setup_oq function to properly
handle failures.
Fixes: 2c0c32c72be29 ("octeon_ep_vf: add hardware configuration APIs")
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com>
---
V3:
- Use reverse christmas tree order variable declaration.
- Return error if timeout happens during setup oq.
V2: https://lore.kernel.org/all/20251219100751.3063135-4-vimleshk@marvell.com/
V1: https://lore.kernel.org/all/20251212122304.2562229-4-vimleshk@marvell.com/
.../marvell/octeon_ep_vf/octep_vf_cn9k.c | 3 +-
.../marvell/octeon_ep_vf/octep_vf_cnxk.c | 39 +++++++++++++++++--
.../marvell/octeon_ep_vf/octep_vf_main.h | 2 +-
.../marvell/octeon_ep_vf/octep_vf_rx.c | 4 +-
4 files changed, 42 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_cn9k.c b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_cn9k.c
index 88937fce75f1..4c769b27c278 100644
--- a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_cn9k.c
+++ b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_cn9k.c
@@ -196,7 +196,7 @@ static void octep_vf_setup_iq_regs_cn93(struct octep_vf_device *oct, int iq_no)
}
/* Setup registers for a hardware Rx Queue */
-static void octep_vf_setup_oq_regs_cn93(struct octep_vf_device *oct, int oq_no)
+static int octep_vf_setup_oq_regs_cn93(struct octep_vf_device *oct, int oq_no)
{
struct octep_vf_oq *oq = oct->oq[oq_no];
u32 time_threshold = 0;
@@ -239,6 +239,7 @@ static void octep_vf_setup_oq_regs_cn93(struct octep_vf_device *oct, int oq_no)
time_threshold = CFG_GET_OQ_INTR_TIME(oct->conf);
reg_val = ((u64)time_threshold << 32) | CFG_GET_OQ_INTR_PKT(oct->conf);
octep_vf_write_csr64(oct, CN93_VF_SDP_R_OUT_INT_LEVELS(oq_no), reg_val);
+ return 0;
}
/* Setup registers for a VF mailbox */
diff --git a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_cnxk.c b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_cnxk.c
index 1f79dfad42c6..a968b93a6794 100644
--- a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_cnxk.c
+++ b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_cnxk.c
@@ -199,11 +199,13 @@ static void octep_vf_setup_iq_regs_cnxk(struct octep_vf_device *oct, int iq_no)
}
/* Setup registers for a hardware Rx Queue */
-static void octep_vf_setup_oq_regs_cnxk(struct octep_vf_device *oct, int oq_no)
+static int octep_vf_setup_oq_regs_cnxk(struct octep_vf_device *oct, int oq_no)
{
struct octep_vf_oq *oq = oct->oq[oq_no];
+ unsigned long t_out_jiffies;
u32 time_threshold = 0;
u64 oq_ctl = ULL(0);
+ u64 reg_ba_val;
u64 reg_val;
reg_val = octep_vf_read_csr64(oct, CNXK_VF_SDP_R_OUT_CONTROL(oq_no));
@@ -214,6 +216,38 @@ static void octep_vf_setup_oq_regs_cnxk(struct octep_vf_device *oct, int oq_no)
reg_val = octep_vf_read_csr64(oct, CNXK_VF_SDP_R_OUT_CONTROL(oq_no));
} while (!(reg_val & CNXK_VF_R_OUT_CTL_IDLE));
}
+ octep_vf_write_csr64(oct, CNXK_VF_SDP_R_OUT_WMARK(oq_no),
+ oq->max_count);
+ /* Wait for WMARK to get applied */
+ usleep_range(10, 15);
+
+ octep_vf_write_csr64(oct, CNXK_VF_SDP_R_OUT_SLIST_BADDR(oq_no),
+ oq->desc_ring_dma);
+ octep_vf_write_csr64(oct, CNXK_VF_SDP_R_OUT_SLIST_RSIZE(oq_no),
+ oq->max_count);
+ reg_ba_val = octep_vf_read_csr64(oct,
+ CNXK_VF_SDP_R_OUT_SLIST_BADDR(oq_no));
+ if (reg_ba_val != oq->desc_ring_dma) {
+ t_out_jiffies = jiffies + 10 * HZ;
+ do {
+ if (reg_ba_val == ULLONG_MAX)
+ return -EFAULT;
+ octep_vf_write_csr64(oct,
+ CNXK_VF_SDP_R_OUT_SLIST_BADDR
+ (oq_no), oq->desc_ring_dma);
+ octep_vf_write_csr64(oct,
+ CNXK_VF_SDP_R_OUT_SLIST_RSIZE
+ (oq_no), oq->max_count);
+ reg_ba_val =
+ octep_vf_read_csr64(oct,
+ CNXK_VF_SDP_R_OUT_SLIST_BADDR
+ (oq_no));
+ } while ((reg_ba_val != oq->desc_ring_dma) &&
+ time_before(jiffies, t_out_jiffies));
+
+ if (reg_ba_val != oq->desc_ring_dma)
+ return -EAGAIN;
+ }
reg_val &= ~(CNXK_VF_R_OUT_CTL_IMODE);
reg_val &= ~(CNXK_VF_R_OUT_CTL_ROR_P);
@@ -227,8 +261,6 @@ static void octep_vf_setup_oq_regs_cnxk(struct octep_vf_device *oct, int oq_no)
reg_val |= (CNXK_VF_R_OUT_CTL_ES_P);
octep_vf_write_csr64(oct, CNXK_VF_SDP_R_OUT_CONTROL(oq_no), reg_val);
- octep_vf_write_csr64(oct, CNXK_VF_SDP_R_OUT_SLIST_BADDR(oq_no), oq->desc_ring_dma);
- octep_vf_write_csr64(oct, CNXK_VF_SDP_R_OUT_SLIST_RSIZE(oq_no), oq->max_count);
oq_ctl = octep_vf_read_csr64(oct, CNXK_VF_SDP_R_OUT_CONTROL(oq_no));
/* Clear the ISIZE and BSIZE (22-0) */
@@ -250,6 +282,7 @@ static void octep_vf_setup_oq_regs_cnxk(struct octep_vf_device *oct, int oq_no)
reg_val &= ~GENMASK_ULL(31, 0);
reg_val |= CFG_GET_OQ_WMARK(oct->conf);
octep_vf_write_csr64(oct, CNXK_VF_SDP_R_OUT_WMARK(oq_no), reg_val);
+ return 0;
}
/* Setup registers for a VF mailbox */
diff --git a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_main.h b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_main.h
index b9f13506f462..c74cd2369e90 100644
--- a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_main.h
+++ b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_main.h
@@ -55,7 +55,7 @@ struct octep_vf_mmio {
struct octep_vf_hw_ops {
void (*setup_iq_regs)(struct octep_vf_device *oct, int q);
- void (*setup_oq_regs)(struct octep_vf_device *oct, int q);
+ int (*setup_oq_regs)(struct octep_vf_device *oct, int q);
void (*setup_mbox_regs)(struct octep_vf_device *oct, int mbox);
irqreturn_t (*non_ioq_intr_handler)(void *ioq_vector);
diff --git a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_rx.c b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_rx.c
index d70c8be3cfc4..6446f6bf0b90 100644
--- a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_rx.c
+++ b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_rx.c
@@ -171,7 +171,9 @@ static int octep_vf_setup_oq(struct octep_vf_device *oct, int q_no)
goto oq_fill_buff_err;
octep_vf_oq_reset_indices(oq);
- oct->hw_ops.setup_oq_regs(oct, q_no);
+ if (oct->hw_ops.setup_oq_regs(oct, q_no))
+ goto oq_fill_buff_err;
+
oct->num_oqs++;
return 0;
--
2.47.0
next prev parent reply other threads:[~2026-01-30 14:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-30 14:15 [PATCH RESEND net v3 0/3] disable interrupts and ensure dbell updation Vimlesh Kumar
2026-01-30 14:15 ` [PATCH RESEND net v3 1/3] octeon_ep: disable per ring interrupts Vimlesh Kumar
2026-02-03 2:04 ` Jakub Kicinski
2026-01-30 14:15 ` [PATCH RESEND net v3 2/3] octeon_ep: ensure dbell BADDR updation Vimlesh Kumar
2026-01-30 14:15 ` Vimlesh Kumar [this message]
2026-02-03 2:03 ` [PATCH RESEND net v3 0/3] disable interrupts and ensure dbell updation Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260130141549.827020-4-vimleshk@marvell.com \
--to=vimleshk@marvell.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hgani@marvell.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sburla@marvell.com \
--cc=sedara@marvell.com \
--cc=srasheed@marvell.com \
--cc=vburru@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox