[PATCH 0/3] net: amd-xgbe: add ARP offload and RSS self-tests

[PATCH 0/3] net: amd-xgbe: add ARP offload and RSS self-tests

[Raju Rangoju]

This series adds ARP offload support and ethtool self-tests for the
AMD XGBE 10 Gigabit Ethernet driver.

Patch 1 adds hardware ARP offload functionality that allows the MAC
to automatically respond to ARP requests without CPU intervention,
reducing system latency and power consumption during suspend/resume
and normal operation.

Patches 2 and 3 add ethtool self-tests for ARP offload and RSS
functionality respectively, allowing users to verify these hardware
features are working correctly via 'ethtool -t <interface>'.

The tests are integrated into the existing XGBE self-test framework
that already includes MAC loopback, PHY loopback, split header, and
jumbo frame tests.

Test results example:
  $ ethtool -t eth0
  The test result is PASS
  The test extra info:
  MAC Loopback       0
  PHY Loopback       0
  Split Header       0
  Jumbo Frame        0
  ARP Offload        0
  RSS                0

Raju Rangoju (3):
  net: amd-xgbe: add hardware ARP offload support
  net: amd-xgbe: add ARP offload ethtool self-test
  net: amd-xgbe: add RSS ethtool self-test

 drivers/net/ethernet/amd/xgbe/xgbe-common.h   |   3 +
 drivers/net/ethernet/amd/xgbe/xgbe-dev.c      |  24 +++
 drivers/net/ethernet/amd/xgbe/xgbe-selftest.c | 149 ++++++++++++++++++
 drivers/net/ethernet/amd/xgbe/xgbe.h          |   4 +
 include/net/selftests.h                       |   1 +
 5 files changed, 181 insertions(+)

-- 
2.34.1

[PATCH 1/3] net: amd-xgbe: add hardware ARP offload support

[Raju Rangoju]

Add ARP offload functionality to the XGBE driver that enables the MAC
hardware to automatically respond to ARP requests without CPU
intervention, reducing system latency and power consumption.

The XGBE MAC supports ARP offloading through:
- MAC_ARP_ADDR register (offset 0x0c10): stores the IPv4 address for
  which the hardware should respond to ARP requests
- ARPEN bit in MAC_RCR register (bit 31): enables/disables the ARP
  offload feature

When enabled, the MAC hardware will automatically generate ARP replies
for requests targeting the configured IP address, without involving
the host CPU.

The feature requires the aoe (ARP Offload Engine) hardware capability
bit (ARPOFFSEL) to be set in the MAC_HWF0R register, which is checked
before enabling.

Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
---
 drivers/net/ethernet/amd/xgbe/xgbe-common.h |  3 +++
 drivers/net/ethernet/amd/xgbe/xgbe-dev.c    | 24 +++++++++++++++++++++
 drivers/net/ethernet/amd/xgbe/xgbe.h        |  4 ++++
 3 files changed, 31 insertions(+)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-common.h b/drivers/net/ethernet/amd/xgbe/xgbe-common.h
index 62b01de93db4..af95326c6b51 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-common.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-common.h
@@ -210,6 +210,7 @@
 #define MAC_MACA0LR			0x0304
 #define MAC_MACA1HR			0x0308
 #define MAC_MACA1LR			0x030c
+#define MAC_ARP_ADDR			0x0c10
 #define MAC_RSSCR			0x0c80
 #define MAC_RSSAR			0x0c88
 #define MAC_RSSDR			0x0c8c
@@ -400,6 +401,8 @@
 #define MAC_RCR_RE_WIDTH		1
 #define MAC_RCR_GPSL_INDEX		16
 #define MAC_RCR_GPSL_WIDTH		14
+#define MAC_RCR_ARPEN_INDEX		31
+#define MAC_RCR_ARPEN_WIDTH		1
 #define MAC_RFCR_PFCE_INDEX		8
 #define MAC_RFCR_PFCE_WIDTH		1
 #define MAC_RFCR_RFE_INDEX		0
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
index b646ae575e6a..761195911f13 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
@@ -3597,3 +3597,27 @@ void xgbe_disable_mac_loopback(struct xgbe_prv_data *pdata)
 	/* Disable MAC loopback mode */
 	XGMAC_IOWRITE_BITS(pdata, MAC_RCR, LM, 0);
 }
+
+/**
+ * xgbe_enable_arp_offload - Enable hardware ARP offload
+ * @pdata: pointer to driver private data
+ * @ip_addr: IPv4 address (in host byte order) to respond to ARP requests
+ *
+ * Configures the MAC to automatically respond to ARP requests for the
+ * specified IP address without CPU intervention.
+ */
+void xgbe_enable_arp_offload(struct xgbe_prv_data *pdata, u32 ip_addr)
+{
+	XGMAC_IOWRITE(pdata, MAC_ARP_ADDR, ip_addr);
+	XGMAC_IOWRITE_BITS(pdata, MAC_RCR, ARPEN, 1);
+}
+
+/**
+ * xgbe_disable_arp_offload - Disable hardware ARP offload
+ * @pdata: pointer to driver private data
+ */
+void xgbe_disable_arp_offload(struct xgbe_prv_data *pdata)
+{
+	XGMAC_IOWRITE_BITS(pdata, MAC_RCR, ARPEN, 0);
+	XGMAC_IOWRITE(pdata, MAC_ARP_ADDR, 0);
+}
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe.h b/drivers/net/ethernet/amd/xgbe/xgbe.h
index 03ef0f548483..bf08628a7ce3 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe.h
@@ -1333,6 +1333,10 @@ int xgbe_selftest_get_count(struct xgbe_prv_data *pdata);
 int xgbe_enable_mac_loopback(struct xgbe_prv_data *pdata);
 void xgbe_disable_mac_loopback(struct xgbe_prv_data *pdata);
 
+/* ARP offload */
+void xgbe_enable_arp_offload(struct xgbe_prv_data *pdata, u32 ip_addr);
+void xgbe_disable_arp_offload(struct xgbe_prv_data *pdata);
+
 #ifdef CONFIG_DEBUG_FS
 void xgbe_debugfs_init(struct xgbe_prv_data *);
 void xgbe_debugfs_exit(struct xgbe_prv_data *);
-- 
2.34.1

[PATCH 2/3] net: amd-xgbe: add ARP offload ethtool self-test

[Raju Rangoju]

Add an ethtool self-test to verify the hardware ARP offload
functionality. The test validates that the MAC correctly responds
to ARP requests without CPU intervention.

Test procedure:
1. Check for aoe (ARP Offload Engine) hardware capability
2. Create an ARP request packet with test IP addresses
3. Enable ARP offload with the target IP address
4. Transmit the ARP request in PHY loopback mode
5. Verify that an ARP reply is received from the hardware
6. Clean up and restore configuration

The test requires the device to be in PHY loopback mode and runs as part
of offline ethtool self-test suite.

Usage:
  $ ethtool -t <interface>

Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
---
 drivers/net/ethernet/amd/xgbe/xgbe-selftest.c | 117 ++++++++++++++++++
 1 file changed, 117 insertions(+)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-selftest.c b/drivers/net/ethernet/amd/xgbe/xgbe-selftest.c
index 55e5e467facd..ae4825578c59 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-selftest.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-selftest.c
@@ -9,8 +9,10 @@
 #include <linux/crc32.h>
 #include <linux/ip.h>
 #include <linux/udp.h>
+#include <linux/if_arp.h>
 #include <net/tcp.h>
 #include <net/udp.h>
+#include <net/arp.h>
 #include <net/checksum.h>
 #include <net/selftests.h>
 
@@ -152,6 +154,117 @@ static int __xgbe_test_loopback(struct xgbe_prv_data *pdata,
 	return ret;
 }
 
+static int xgbe_test_arp_validate(struct sk_buff *skb,
+				  struct net_device *ndev,
+				  struct packet_type *pt,
+				  struct net_device *orig_ndev)
+{
+	struct net_test_priv *tdata = pt->af_packet_priv;
+	struct ethhdr *eth_hdr;
+	struct arphdr *ah;
+
+	skb = skb_unshare(skb, GFP_ATOMIC);
+	if (!skb)
+		goto out;
+	if (skb_linearize(skb))
+		goto out;
+
+	eth_hdr = (struct ethhdr *)skb_mac_header(skb);
+
+	/* Verify the reply is destined to our test source MAC */
+	if (!ether_addr_equal_unaligned(eth_hdr->h_dest, tdata->packet->src))
+		goto out;
+
+	/* Verify this is an ARP packet */
+	if (eth_hdr->h_proto != htons(ETH_P_ARP))
+		goto out;
+
+	ah = arp_hdr(skb);
+
+	/* Verify this is an ARP reply */
+	if (ah->ar_op != htons(ARPOP_REPLY))
+		goto out;
+
+	tdata->ok = true;
+	complete(&tdata->comp);
+out:
+	kfree_skb(skb);
+	return 0;
+}
+
+static int xgbe_test_arpoffload(struct xgbe_prv_data *pdata)
+{
+	unsigned char src[ETH_ALEN] = {0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f};
+	unsigned char bcast[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+	struct net_packet_attrs attr = {};
+	struct net_test_priv *tdata;
+	struct sk_buff *skb = NULL;
+	u32 dst_ip = 0xabcdefab;
+	u32 src_ip = 0xefdcbaef;
+	int ret;
+
+	/* Check if ARP offload is supported */
+	if (!pdata->hw_feat.aoe)
+		return -EOPNOTSUPP;
+
+	tdata = kzalloc(sizeof(*tdata), GFP_KERNEL);
+	if (!tdata)
+		return -ENOMEM;
+
+	tdata->ok = false;
+	init_completion(&tdata->comp);
+
+	tdata->pt.type = htons(ETH_P_ARP);
+	tdata->pt.func = xgbe_test_arp_validate;
+	tdata->pt.dev = pdata->netdev;
+	tdata->pt.af_packet_priv = tdata;
+	tdata->packet = &attr;
+	dev_add_pack(&tdata->pt);
+
+	attr.src = src;
+	attr.ip_src = src_ip;
+	attr.dst = bcast;
+	attr.ip_dst = dst_ip;
+
+	/* Create ARP request packet */
+	skb = arp_create(ARPOP_REQUEST, ETH_P_ARP, htonl(dst_ip),
+			 pdata->netdev,	htonl(src_ip), NULL, src, bcast);
+	if (!skb) {
+		ret = -ENOMEM;
+		goto free;
+	}
+
+	skb->pkt_type = PACKET_HOST;
+	skb->dev = pdata->netdev;
+	skb->protocol = htons(ETH_P_ARP);
+
+	/* Enable ARP offload */
+	xgbe_enable_arp_offload(pdata, dst_ip);
+
+	ret = dev_set_promiscuity(pdata->netdev, 1);
+	if (ret) {
+		kfree_skb(skb);
+		goto cleanup;
+	}
+
+	ret = dev_direct_xmit(skb, 0);
+	if (ret)
+		goto cleanup_promisc;
+
+	/* Wait for ARP reply */
+	wait_for_completion_timeout(&tdata->comp, NET_LB_TIMEOUT);
+	ret = tdata->ok ? 0 : -ETIMEDOUT;
+
+cleanup_promisc:
+	dev_set_promiscuity(pdata->netdev, -1);
+cleanup:
+	xgbe_disable_arp_offload(pdata);
+	dev_remove_pack(&tdata->pt);
+free:
+	kfree(tdata);
+	return ret;
+}
+
 static int xgbe_test_mac_loopback(struct xgbe_prv_data *pdata)
 {
 	struct net_packet_attrs attr = {};
@@ -251,6 +364,10 @@ static const struct xgbe_test xgbe_selftests[] = {
 		.name = "Jumbo Frame    ",
 		.lb = XGBE_LOOPBACK_PHY,
 		.fn = xgbe_test_jumbo,
+	}, {
+		.name = "ARP Offload    ",
+		.lb = XGBE_LOOPBACK_PHY,
+		.fn = xgbe_test_arpoffload,
 	},
 };
 
-- 
2.34.1

Re: [PATCH 2/3] net: amd-xgbe: add ARP offload ethtool self-test

[kernel test robot]

Hi Raju,

kernel test robot noticed the following build errors:

[auto build test ERROR on net/main]
[also build test ERROR on net-next/main linus/master v6.19-rc8 next-20260202]
[cannot apply to horms-ipvs/master]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Raju-Rangoju/net-amd-xgbe-add-hardware-ARP-offload-support/20260202-235023
base:   net/main
patch link:    https://lore.kernel.org/r/20260202153542.1727429-3-Raju.Rangoju%40amd.com
patch subject: [PATCH 2/3] net: amd-xgbe: add ARP offload ethtool self-test
config: powerpc-randconfig-002-20260203 (https://download.01.org/0day-ci/archive/20260203/202602030920.SWN7cwzT-lkp@intel.com/config)
compiler: powerpc-linux-gcc (GCC) 10.5.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20260203/202602030920.SWN7cwzT-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202602030920.SWN7cwzT-lkp@intel.com/

All errors (new ones prefixed by >>):

   powerpc-linux-ld: drivers/net/ethernet/amd/xgbe/xgbe-selftest.o: in function `xgbe_test_arpoffload':
>> drivers/net/ethernet/amd/xgbe/xgbe-selftest.c:230: undefined reference to `arp_create'
   powerpc-linux-ld: net/core/selftests.o: in function `net_test_get_skb':
   net/core/selftests.c:104: undefined reference to `ip_send_check'
   powerpc-linux-ld: net/core/selftests.c:148: undefined reference to `udp4_hwcsum'

Kconfig warnings: (for reference only)
   WARNING: unmet direct dependencies detected for HOTPLUG_CPU
   Depends on [n]: SMP [=y] && (PPC_PSERIES [=n] || PPC_PMAC [=n] || PPC_POWERNV [=n] || FSL_SOC_BOOKE [=n])
   Selected by [y]:
   - PM_SLEEP_SMP [=y] && SMP [=y] && (ARCH_SUSPEND_POSSIBLE [=n] || ARCH_HIBERNATION_POSSIBLE [=y]) && PM_SLEEP [=y]
   WARNING: unmet direct dependencies detected for NET_SELFTESTS
   Depends on [n]: NET [=y] && PHYLIB [=y] && INET [=n]
   Selected by [y]:
   - AMD_XGBE [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_AMD [=y] && (OF_ADDRESS [=y] || ACPI || PCI [=n]) && HAS_IOMEM [=y] && (X86 || ARM64 || COMPILE_TEST [=y]) && PTP_1588_CLOCK_OPTIONAL [=y]


vim +230 drivers/net/ethernet/amd/xgbe/xgbe-selftest.c

   194	
   195	static int xgbe_test_arpoffload(struct xgbe_prv_data *pdata)
   196	{
   197		unsigned char src[ETH_ALEN] = {0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f};
   198		unsigned char bcast[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
   199		struct net_packet_attrs attr = {};
   200		struct net_test_priv *tdata;
   201		struct sk_buff *skb = NULL;
   202		u32 dst_ip = 0xabcdefab;
   203		u32 src_ip = 0xefdcbaef;
   204		int ret;
   205	
   206		/* Check if ARP offload is supported */
   207		if (!pdata->hw_feat.aoe)
   208			return -EOPNOTSUPP;
   209	
   210		tdata = kzalloc(sizeof(*tdata), GFP_KERNEL);
   211		if (!tdata)
   212			return -ENOMEM;
   213	
   214		tdata->ok = false;
   215		init_completion(&tdata->comp);
   216	
   217		tdata->pt.type = htons(ETH_P_ARP);
   218		tdata->pt.func = xgbe_test_arp_validate;
   219		tdata->pt.dev = pdata->netdev;
   220		tdata->pt.af_packet_priv = tdata;
   221		tdata->packet = &attr;
   222		dev_add_pack(&tdata->pt);
   223	
   224		attr.src = src;
   225		attr.ip_src = src_ip;
   226		attr.dst = bcast;
   227		attr.ip_dst = dst_ip;
   228	
   229		/* Create ARP request packet */
 > 230		skb = arp_create(ARPOP_REQUEST, ETH_P_ARP, htonl(dst_ip),
   231				 pdata->netdev,	htonl(src_ip), NULL, src, bcast);
   232		if (!skb) {
   233			ret = -ENOMEM;
   234			goto free;
   235		}
   236	
   237		skb->pkt_type = PACKET_HOST;
   238		skb->dev = pdata->netdev;
   239		skb->protocol = htons(ETH_P_ARP);
   240	
   241		/* Enable ARP offload */
   242		xgbe_enable_arp_offload(pdata, dst_ip);
   243	
   244		ret = dev_set_promiscuity(pdata->netdev, 1);
   245		if (ret) {
   246			kfree_skb(skb);
   247			goto cleanup;
   248		}
   249	
   250		ret = dev_direct_xmit(skb, 0);
   251		if (ret)
   252			goto cleanup_promisc;
   253	
   254		/* Wait for ARP reply */
   255		wait_for_completion_timeout(&tdata->comp, NET_LB_TIMEOUT);
   256		ret = tdata->ok ? 0 : -ETIMEDOUT;
   257	
   258	cleanup_promisc:
   259		dev_set_promiscuity(pdata->netdev, -1);
   260	cleanup:
   261		xgbe_disable_arp_offload(pdata);
   262		dev_remove_pack(&tdata->pt);
   263	free:
   264		kfree(tdata);
   265		return ret;
   266	}
   267	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

Re: [2/3] net: amd-xgbe: add ARP offload ethtool self-test

[Jakub Kicinski]

This is an AI-generated review of your patch. The human sending this
email has considered the AI review valid, or at least plausible.

For local reproduction steps see https://netdev-ai.bots.linux.dev/ai-local.html
---
net: amd-xgbe: add ARP offload ethtool self-test

This patch adds an ethtool self-test to verify the hardware ARP offload
functionality. The test creates an ARP request, enables ARP offload, and
verifies the hardware responds with an ARP reply.

> diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-selftest.c b/drivers/net/ethernet/amd/xgbe/xgbe-selftest.c
> --- a/drivers/net/ethernet/amd/xgbe/xgbe-selftest.c
> +++ b/drivers/net/ethernet/amd/xgbe/xgbe-selftest.c

[ ... ]

> +static int xgbe_test_arpoffload(struct xgbe_prv_data *pdata)
> +{

[ ... ]

> +	tdata->pt.type = htons(ETH_P_ARP);
> +	tdata->pt.func = xgbe_test_arp_validate;
> +	tdata->pt.dev = pdata->netdev;
> +	tdata->pt.af_packet_priv = tdata;
> +	tdata->packet = &attr;
> +	dev_add_pack(&tdata->pt);

[ ... ]

> +	/* Create ARP request packet */
> +	skb = arp_create(ARPOP_REQUEST, ETH_P_ARP, htonl(dst_ip),
> +			 pdata->netdev,	htonl(src_ip), NULL, src, bcast);
> +	if (!skb) {
> +		ret = -ENOMEM;
> +		goto free;
> +	}

Can this cause a use-after-free? The packet handler is registered via
dev_add_pack() before arp_create() is called. When arp_create() fails,
'goto free' jumps directly to kfree(tdata) without calling
dev_remove_pack(&tdata->pt).

This leaves the packet handler registered with a dangling pointer
(tdata->pt.af_packet_priv = tdata). When any ARP packet subsequently
arrives, xgbe_test_arp_validate() is called and dereferences freed memory:

    struct net_test_priv *tdata = pt->af_packet_priv;
    ...
    if (!ether_addr_equal_unaligned(eth_hdr->h_dest, tdata->packet->src))

Should 'goto free' be changed to 'goto cleanup' here to ensure
dev_remove_pack() is called?
-- 
pw-bot: cr

[PATCH 3/3] net: amd-xgbe: add RSS ethtool self-test

[Raju Rangoju]

Add a Receive Side Scaling (RSS) self-test to the ethtool diagnostic
suite to verify that the hardware correctly computes hash values for
incoming packets.

The test validates RSS functionality by:
1. Checking for RSS hardware feature support (rss bit in MAC_HWF1R)
2. Sending a test packet with specific TCP/UDP ports to trigger
   hash computation
3. Verifying that the received packet has a non-zero hash value
   computed by the hardware

The test uses the existing loopback infrastructure and requires
PHY loopback mode. It uses specific port values (sport=0xabc,
dport=0xdef) to generate a deterministic hash that exercises
the RSS hash computation logic.

This test helps users verify that RSS is properly configured and
functioning, which is essential for multi-queue performance on
multi-core systems.

Usage:
  $ ethtool -t <interface>

Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
---
 drivers/net/ethernet/amd/xgbe/xgbe-selftest.c | 32 +++++++++++++++++++
 include/net/selftests.h                       |  1 +
 2 files changed, 33 insertions(+)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-selftest.c b/drivers/net/ethernet/amd/xgbe/xgbe-selftest.c
index ae4825578c59..bd1c757bbc3f 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-selftest.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-selftest.c
@@ -100,8 +100,13 @@ static int xgbe_test_loopback_validate(struct sk_buff *skb,
 	if (tdata->packet->id != hdr->id)
 		goto out;
 
+	/* Validate RSS hash if expected */
+	if (tdata->packet->exp_hash && !skb->hash)
+		goto out;
+
 	tdata->ok = true;
 	complete(&tdata->comp);
+
 out:
 	kfree_skb(skb);
 	return 0;
@@ -154,6 +159,29 @@ static int __xgbe_test_loopback(struct xgbe_prv_data *pdata,
 	return ret;
 }
 
+static int xgbe_test_rss(struct xgbe_prv_data *pdata)
+{
+	struct net_packet_attrs attr = {};
+	int ret;
+
+	/* Check for RSS hardware support */
+	if (!pdata->hw_feat.rss)
+		return -EOPNOTSUPP;
+
+	attr.dst = pdata->netdev->dev_addr;
+	/*
+	 * Use specific port values to generate a hash.
+	 * The asymmetric port values ensure the hash computation
+	 * produces a non-zero result for test validation.
+	 */
+	attr.sport = 0xabc;
+	attr.dport = 0xdef;
+	attr.exp_hash = true;
+	ret = __xgbe_test_loopback(pdata, &attr);
+
+	return ret;
+}
+
 static int xgbe_test_arp_validate(struct sk_buff *skb,
 				  struct net_device *ndev,
 				  struct packet_type *pt,
@@ -368,6 +396,10 @@ static const struct xgbe_test xgbe_selftests[] = {
 		.name = "ARP Offload    ",
 		.lb = XGBE_LOOPBACK_PHY,
 		.fn = xgbe_test_arpoffload,
+	}, {
+		.name = "RSS Hash       ",
+		.lb = XGBE_LOOPBACK_PHY,
+		.fn = xgbe_test_rss,
 	},
 };
 
diff --git a/include/net/selftests.h b/include/net/selftests.h
index c36e07406ad4..18a9b4830dfc 100644
--- a/include/net/selftests.h
+++ b/include/net/selftests.h
@@ -19,6 +19,7 @@ struct net_packet_attrs {
 	u8 id;
 	u16 queue_mapping;
 	bool bad_csum;
+	u32 exp_hash;
 };
 
 struct net_test_priv {
-- 
2.34.1