[PATCH net] dpll: zl3073x: Fix output pin phase adjustment sign

[Ivan Vecera <ivecera@redhat.com>]

The output pin phase adjustment functions incorrectly negate the phase
compensation value.

Per the ZL3073x datasheet, the output phase compensation register is
simply a signed two's complement integer where:
 - Positive values move the phase later in time
 - Negative values move the phase earlier in time

No negation is required. The erroneous negation caused phase adjustments
to be applied in the wrong direction.

Note that input pin phase adjustment correctly uses negation because the
hardware has an inverted convention for input references (positive moves
phase earlier, negative moves phase later).

Fixes: 6287262f761e ("dpll: zl3073x: Add support to adjust phase")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
 drivers/dpll/zl3073x/dpll.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/dpll/zl3073x/dpll.c b/drivers/dpll/zl3073x/dpll.c
index 9879d85d29af..a8001c976038 100644
--- a/drivers/dpll/zl3073x/dpll.c
+++ b/drivers/dpll/zl3073x/dpll.c
@@ -1039,10 +1039,8 @@ zl3073x_dpll_output_pin_phase_adjust_get(const struct dpll_pin *dpll_pin,
 	out_id = zl3073x_output_pin_out_get(pin->id);
 	out = zl3073x_out_state_get(zldev, out_id);
 
-	/* Convert value to ps and reverse two's complement negation applied
-	 * during 'set'
-	 */
-	*phase_adjust = -out->phase_comp * pin->phase_gran;
+	/* The value in the register is expressed in half synth clock cycles. */
+	*phase_adjust = out->phase_comp * pin->phase_gran;
 
 	return 0;
 }
@@ -1064,10 +1062,8 @@ zl3073x_dpll_output_pin_phase_adjust_set(const struct dpll_pin *dpll_pin,
 	out_id = zl3073x_output_pin_out_get(pin->id);
 	out = *zl3073x_out_state_get(zldev, out_id);
 
-	/* The value in the register is stored as two's complement negation
-	 * of requested value and expressed in half synth clock cycles.
-	 */
-	out.phase_comp = -phase_adjust / pin->phase_gran;
+	/* The value in the register is expressed in half synth clock cycles. */
+	out.phase_comp = phase_adjust / pin->phase_gran;
 
 	/* Update output configuration from mailbox */
 	return zl3073x_out_state_set(zldev, out_id, &out);
-- 
2.52.0