[PATCH net-next v5 10/15] net: ftgmac100: Simplify legacy MDIO setup

[Jacky Chou <jacky_chou@aspeedtech.com>]

From: Andrew Lunn <andrew@lunn.ch>

There are old device trees which place the PHY nodes directly in the
MAC nodes, rather than within an MDIO container node.

The probe logic indicates that the use of NCSI and the legacy
placement of PHYs is mutually exclusive. Hence priv->use_ncsi cannot
be true, so there is no reason to set it false.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index c33726e7bff6..ee886ed03587 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -2010,8 +2010,6 @@ static int ftgmac100_probe(struct platform_device *pdev)
 		 * child node. Automatically scan the MDIO bus for available
 		 * PHYs.
 		 */
-		priv->use_ncsi = false;
-
 		err = ftgmac100_mii_probe(netdev);
 		if (err) {
 			dev_err(priv->dev, "MII probe failed!\n");

-- 
2.34.1