[PATCH net-next v5 12/15] net: ftgmac100: Remove redundant PHY_POLL

[Jacky Chou <jacky_chou@aspeedtech.com>]

From: Andrew Lunn <andrew@lunn.ch>

When an MDIO bus is allocated, the irqs for each PHY are set to
polling. Remove the redundant code in the MAC driver which does the
same.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index ad1203b8de0b..b86e47853217 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1717,7 +1717,7 @@ static int ftgmac100_setup_mdio(struct net_device *netdev)
 	struct platform_device *pdev = to_platform_device(priv->dev);
 	struct device_node *np = pdev->dev.of_node;
 	struct device_node *mdio_np;
-	int i, err = 0;
+	int err = 0;
 	u32 reg;
 
 	/* initialize mdio bus */
@@ -1745,9 +1745,6 @@ static int ftgmac100_setup_mdio(struct net_device *netdev)
 	priv->mii_bus->read = ftgmac100_mdiobus_read;
 	priv->mii_bus->write = ftgmac100_mdiobus_write;
 
-	for (i = 0; i < PHY_MAX_ADDR; i++)
-		priv->mii_bus->irq[i] = PHY_POLL;
-
 	mdio_np = of_get_child_by_name(np, "mdio");
 
 	err = of_mdiobus_register(priv->mii_bus, mdio_np);

-- 
2.34.1