[PATCH net-next v5 06/15] net: ftgmac100: Use devm_clk_get_enabled

[Jacky Chou <jacky_chou@aspeedtech.com>]

From: Andrew Lunn <andrew@lunn.ch>

Make use of devm_ methods to request and enable clocks to simplify
cleanup.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 24 ++++++------------------
 1 file changed, 6 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index ec2e7ec23ddf..1fb03dd55c8f 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1801,13 +1801,10 @@ static int ftgmac100_setup_clk(struct ftgmac100 *priv)
 	struct clk *clk;
 	int rc;
 
-	clk = devm_clk_get(priv->dev, NULL /* MACCLK */);
+	clk = devm_clk_get_enabled(priv->dev, NULL /* MACCLK */);
 	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 	priv->clk = clk;
-	rc = clk_prepare_enable(priv->clk);
-	if (rc)
-		return rc;
 
 	/* Aspeed specifies a 100MHz clock is required for up to
 	 * 1000Mbit link speeds. As NCSI is limited to 100Mbit, 25MHz
@@ -1816,21 +1813,17 @@ static int ftgmac100_setup_clk(struct ftgmac100 *priv)
 	rc = clk_set_rate(priv->clk, priv->use_ncsi ? FTGMAC_25MHZ :
 			  FTGMAC_100MHZ);
 	if (rc)
-		goto cleanup_clk;
+		return rc;
 
 	/* RCLK is for RMII, typically used for NCSI. Optional because it's not
 	 * necessary if it's the AST2400 MAC, or the MAC is configured for
 	 * RGMII, or the controller is not an ASPEED-based controller.
 	 */
-	priv->rclk = devm_clk_get_optional(priv->dev, "RCLK");
-	rc = clk_prepare_enable(priv->rclk);
-	if (!rc)
-		return 0;
+	priv->rclk = devm_clk_get_optional_enabled(priv->dev, "RCLK");
+	if (IS_ERR(priv->rclk))
+		return PTR_ERR(priv->rclk);
 
-cleanup_clk:
-	clk_disable_unprepare(priv->clk);
-
-	return rc;
+	return 0;
 }
 
 static bool ftgmac100_has_child_node(struct device_node *np, const char *name)
@@ -2064,8 +2057,6 @@ static int ftgmac100_probe(struct platform_device *pdev)
 	return 0;
 
 err_register_netdev:
-	clk_disable_unprepare(priv->rclk);
-	clk_disable_unprepare(priv->clk);
 err_phy_connect:
 	ftgmac100_phy_disconnect(netdev);
 err_ncsi_dev:
@@ -2088,9 +2079,6 @@ static void ftgmac100_remove(struct platform_device *pdev)
 		ncsi_unregister_dev(priv->ndev);
 	unregister_netdev(netdev);
 
-	clk_disable_unprepare(priv->rclk);
-	clk_disable_unprepare(priv->clk);
-
 	/* There's a small chance the reset task will have been re-queued,
 	 * during stop, make sure it's gone before we free the structure.
 	 */

-- 
2.34.1