[PATCH net-next 2/2] gve: Enable reading max ring size from the device in DQO-QPL mode

[Joshua Washington <joshwash@google.com>]

From: Matt Olson <maolson@google.com>

The gVNIC device indicates a device option (MODIFY_RING) to the driver,
which presents a range of ring sizes from which the user is allowed to
select. But in DQO-QPL queue format, the driver ignores the "max" of
this range and instead allows the user to configure the ring size in the
range [min, default]. This was done because increasing the ring size
could result in the number of registered pages being higher than the max
allowed by the device.

In order to support large ring sizes, stop ignoring the "max" of the
range presented in the MODIFY_RING option.

Signed-off-by: Matt Olson <maolson@google.com>
Signed-off-by: Max Yuan <maxyuan@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
---
 drivers/net/ethernet/google/gve/gve_adminq.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index b1983f97..08587bf4 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -989,12 +989,10 @@ static void gve_enable_supported_features(struct gve_priv *priv,
 	if (dev_op_modify_ring &&
 	    (supported_features_mask & GVE_SUP_MODIFY_RING_MASK)) {
 		priv->modify_ring_size_enabled = true;
-
-		/* max ring size for DQO QPL should not be overwritten because of device limit */
-		if (priv->queue_format != GVE_DQO_QPL_FORMAT) {
-			priv->max_rx_desc_cnt = be16_to_cpu(dev_op_modify_ring->max_rx_ring_size);
-			priv->max_tx_desc_cnt = be16_to_cpu(dev_op_modify_ring->max_tx_ring_size);
-		}
+		priv->max_rx_desc_cnt =
+			be16_to_cpu(dev_op_modify_ring->max_rx_ring_size);
+		priv->max_tx_desc_cnt =
+			be16_to_cpu(dev_op_modify_ring->max_tx_ring_size);
 		if (priv->default_min_ring_size) {
 			/* If device hasn't provided minimums, use default minimums */
 			priv->min_tx_desc_cnt = GVE_DEFAULT_MIN_TX_RING_SIZE;
-- 
2.53.0.239.g8d8fc8a987-goog