public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: Vimlesh Kumar <vimleshk@marvell.com>
To: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <sedara@marvell.com>, <srasheed@marvell.com>, <hgani@marvell.com>,
	"Vimlesh Kumar" <vimleshk@marvell.com>,
	Veerasenareddy Burru <vburru@marvell.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	"Paolo Abeni" <pabeni@redhat.com>,
	Satananda Burla <sburla@marvell.com>,
	"Abhijit Ayarekar" <aayarekar@marvell.com>
Subject: [PATCH RESEND net v1 1/2] octeon_ep: avoid compiler and IQ/OQ reordering
Date: Thu, 12 Feb 2026 12:16:31 +0000	[thread overview]
Message-ID: <20260212121634.360252-2-vimleshk@marvell.com> (raw)
In-Reply-To: <20260212121634.360252-1-vimleshk@marvell.com>

Utilize READ_ONCE and WRITE_ONCE APIs for IO queue Tx/Rx
variable access to prevent compiler optimization and reordering.
Additionally, ensure IO queue OUT/IN_CNT registers are flushed
by performing a read-back after writing.

Relocate IQ/OQ IN/OUT_CNTS updates to occur before NAPI completion,
and replace napi_complete with napi_complete_done.

Fixes: 37d79d0596062 ("octeon_ep: add Tx/Rx processing and interrupt support")
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com>
---
 .../ethernet/marvell/octeon_ep/octep_main.c   | 40 +++++++++++++------
 .../net/ethernet/marvell/octeon_ep/octep_rx.c | 27 +++++++++----
 2 files changed, 47 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
index bcea3fc26a8c..ccfb248d0914 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
@@ -555,28 +555,43 @@ static void octep_clean_irqs(struct octep_device *oct)
 }
 
 /**
- * octep_enable_ioq_irq() - Enable MSI-x interrupt of a Tx/Rx queue.
+ * octep_update_pkt() - Update IQ/OQ IN/OUT_CNT registers.
  *
  * @iq: Octeon Tx queue data structure.
  * @oq: Octeon Rx queue data structure.
  */
-static void octep_enable_ioq_irq(struct octep_iq *iq, struct octep_oq *oq)
+static void octep_update_pkt(struct octep_iq *iq, struct octep_oq *oq)
 {
-	u32 pkts_pend = oq->pkts_pending;
+	u32 pkts_pend = READ_ONCE(oq->pkts_pending);
+	u32 last_pkt_count = READ_ONCE(oq->last_pkt_count);
+	u32 pkts_processed = READ_ONCE(iq->pkts_processed);
+	u32 pkt_in_done = READ_ONCE(iq->pkt_in_done);
 
 	netdev_dbg(iq->netdev, "enabling intr for Q-%u\n", iq->q_no);
-	if (iq->pkts_processed) {
-		writel(iq->pkts_processed, iq->inst_cnt_reg);
-		iq->pkt_in_done -= iq->pkts_processed;
-		iq->pkts_processed = 0;
+	if (pkts_processed) {
+		writel(pkts_processed, iq->inst_cnt_reg);
+		readl(iq->inst_cnt_reg);
+		WRITE_ONCE(iq->pkt_in_done, (pkt_in_done - pkts_processed));
+		WRITE_ONCE(iq->pkts_processed, 0);
 	}
-	if (oq->last_pkt_count - pkts_pend) {
-		writel(oq->last_pkt_count - pkts_pend, oq->pkts_sent_reg);
-		oq->last_pkt_count = pkts_pend;
+	if (last_pkt_count - pkts_pend) {
+		writel(last_pkt_count - pkts_pend, oq->pkts_sent_reg);
+		readl(oq->pkts_sent_reg);
+		WRITE_ONCE(oq->last_pkt_count, pkts_pend);
 	}
 
 	/* Flush the previous wrties before writing to RESEND bit */
-	wmb();
+	smp_wmb();
+}
+
+/**
+ * octep_enable_ioq_irq() - Enable MSI-x interrupt of a Tx/Rx queue.
+ *
+ * @iq: Octeon Tx queue data structure.
+ * @oq: Octeon Rx queue data structure.
+ */
+static void octep_enable_ioq_irq(struct octep_iq *iq, struct octep_oq *oq)
+{
 	writeq(1UL << OCTEP_OQ_INTR_RESEND_BIT, oq->pkts_sent_reg);
 	writeq(1UL << OCTEP_IQ_INTR_RESEND_BIT, iq->inst_cnt_reg);
 }
@@ -602,7 +617,8 @@ static int octep_napi_poll(struct napi_struct *napi, int budget)
 	if (tx_pending || rx_done >= budget)
 		return budget;
 
-	napi_complete(napi);
+	octep_update_pkt(ioq_vector->iq, ioq_vector->oq);
+	napi_complete_done(napi, rx_done);
 	octep_enable_ioq_irq(ioq_vector->iq, ioq_vector->oq);
 	return rx_done;
 }
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_rx.c b/drivers/net/ethernet/marvell/octeon_ep/octep_rx.c
index 82b6b19e76b4..11f1b45d0f92 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_rx.c
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_rx.c
@@ -318,10 +318,16 @@ static int octep_oq_check_hw_for_pkts(struct octep_device *oct,
 				      struct octep_oq *oq)
 {
 	u32 pkt_count, new_pkts;
+	u32 last_pkt_count, pkts_pending;
 
 	pkt_count = readl(oq->pkts_sent_reg);
-	new_pkts = pkt_count - oq->last_pkt_count;
+	last_pkt_count = READ_ONCE(oq->last_pkt_count);
+	new_pkts = pkt_count - last_pkt_count;
 
+	if (pkt_count < last_pkt_count) {
+		dev_err(oq->dev, "OQ-%u pkt_count(%u) < oq->last_pkt_count(%u)\n",
+			oq->q_no, pkt_count, last_pkt_count);
+	}
 	/* Clear the hardware packets counter register if the rx queue is
 	 * being processed continuously with-in a single interrupt and
 	 * reached half its max value.
@@ -332,8 +338,9 @@ static int octep_oq_check_hw_for_pkts(struct octep_device *oct,
 		pkt_count = readl(oq->pkts_sent_reg);
 		new_pkts += pkt_count;
 	}
-	oq->last_pkt_count = pkt_count;
-	oq->pkts_pending += new_pkts;
+	WRITE_ONCE(oq->last_pkt_count, pkt_count);
+	pkts_pending = READ_ONCE(oq->pkts_pending);
+	WRITE_ONCE(oq->pkts_pending, (pkts_pending + new_pkts));
 	return new_pkts;
 }
 
@@ -408,7 +415,7 @@ static int __octep_oq_process_rx(struct octep_device *oct,
 	u16 rx_ol_flags;
 	u32 read_idx;
 
-	read_idx = oq->host_read_idx;
+	read_idx = READ_ONCE(oq->host_read_idx);
 	rx_bytes = 0;
 	desc_used = 0;
 	for (pkt = 0; pkt < pkts_to_process; pkt++) {
@@ -493,7 +500,7 @@ static int __octep_oq_process_rx(struct octep_device *oct,
 		napi_gro_receive(oq->napi, skb);
 	}
 
-	oq->host_read_idx = read_idx;
+	WRITE_ONCE(oq->host_read_idx, read_idx);
 	oq->refill_count += desc_used;
 	oq->stats->packets += pkt;
 	oq->stats->bytes += rx_bytes;
@@ -516,22 +523,26 @@ int octep_oq_process_rx(struct octep_oq *oq, int budget)
 {
 	u32 pkts_available, pkts_processed, total_pkts_processed;
 	struct octep_device *oct = oq->octep_dev;
+	u32 pkts_pending;
 
 	pkts_available = 0;
 	pkts_processed = 0;
 	total_pkts_processed = 0;
 	while (total_pkts_processed < budget) {
 		 /* update pending count only when current one exhausted */
-		if (oq->pkts_pending == 0)
+		pkts_pending = READ_ONCE(oq->pkts_pending);
+		if (pkts_pending == 0)
 			octep_oq_check_hw_for_pkts(oct, oq);
+		pkts_pending = READ_ONCE(oq->pkts_pending);
 		pkts_available = min(budget - total_pkts_processed,
-				     oq->pkts_pending);
+				     pkts_pending);
 		if (!pkts_available)
 			break;
 
 		pkts_processed = __octep_oq_process_rx(oct, oq,
 						       pkts_available);
-		oq->pkts_pending -= pkts_processed;
+		pkts_pending = READ_ONCE(oq->pkts_pending);
+		WRITE_ONCE(oq->pkts_pending, (pkts_pending - pkts_processed));
 		total_pkts_processed += pkts_processed;
 	}
 
-- 
2.47.3


  reply	other threads:[~2026-02-12 12:16 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-12 12:16 [PATCH RESEND net v1 0/2] avoid compiler and IQ/OQ reordering Vimlesh Kumar
2026-02-12 12:16 ` Vimlesh Kumar [this message]
2026-02-17  9:56   ` [PATCH RESEND net v1 1/2] octeon_ep: " Paolo Abeni
2026-02-20  9:05     ` [EXTERNAL] " Vimlesh Kumar
2026-02-12 12:16 ` [PATCH RESEND net v1 2/2] octeon_ep_vf: " Vimlesh Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260212121634.360252-2-vimleshk@marvell.com \
    --to=vimleshk@marvell.com \
    --cc=aayarekar@marvell.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hgani@marvell.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=sburla@marvell.com \
    --cc=sedara@marvell.com \
    --cc=srasheed@marvell.com \
    --cc=vburru@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox