[PATCH for 6.12] net: stmmac: dwmac-loongson: Set clk_csr_i to 100-150MHz

[PATCH for 6.12] net: stmmac: dwmac-loongson: Set clk_csr_i to 100-150MHz

[Huacai Chen]

commit e1aa5ef892fb4fa9014a25e87b64b97347919d37 upstream.

Current clk_csr_i setting of Loongson STMMAC (including LS7A1000/2000
and LS2K1000/2000/3000) are copy & paste from other drivers. In fact,
Loongson STMMAC use 125MHz clocks and need 62 freq division to within
2.5MHz, meeting most PHY MDC requirement. So fix by setting clk_csr_i
to 100-150MHz, otherwise some PHYs may link fail.

Cc: stable@vger.kernel.org
Fixes: 30bba69d7db40e7 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index 0cb8e23a7828..4b0860d3ad8a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -90,7 +90,7 @@ static void loongson_default_data(struct pci_dev *pdev,
 	/* Get bus_id, this can be overwritten later */
 	plat->bus_id = pci_dev_id(pdev);
 
-	plat->clk_csr = 2;	/* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
+	plat->clk_csr = 1;	/* clk_csr_i = 100-150MHz & MDC = clk_csr_i/62 */
 	plat->has_gmac = 1;
 	plat->force_sf_dma_mode = 1;
 
-- 
2.52.0