From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
edumazet@google.com, andrew+netdev@lunn.ch,
netdev@vger.kernel.org
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Subject: [PATCH net 00/13][pull request] Intel Wired LAN Driver Updates 2026-02-19 (idpf, ice, i40e, ixgbevf, e1000e)
Date: Thu, 19 Feb 2026 16:40:12 -0800 [thread overview]
Message-ID: <20260220004027.729384-1-anthony.l.nguyen@intel.com> (raw)
For idpf:
Li Li moves the check for software marker to occur after incrementing
next to clean to avoid re-encountering the same packet. He also adds a
couple of checks to prevent NULL pointer dereferences and NULLs rss_key,
after free, in error path so that later checks are properly evaluated.
Brian Vazquez adjusts IRQ naming to have correlation with netdev naming.
Sreedevi removes validation of action type as part of ntuple rule
deletion.
For ice:
Aaron Ma breaks RDMA initialization into two steps and adjusts calls so
that VSIs are entirely configured before plugging.
Michal Schmidt fixes initialization of loopback VSI to have proper
resources allocated to allow for loopback testing to occur.
For i40e:
Thomas Gleixner fixes a leak of preempt count by replacing get_cpu()
with smp_processor_id().
For ixgbevf:
Jedrzej adds a check for mailbox version before attempting to call an
associated link state call that is supported in that mailbox version.
For e1000e:
Vitaly clears power gating feature for Panther Lake systems to avoid
packet issues. He also adds detection, and correction, of XTAL clock on
Tiger Lake and Alder Lake systems.
The following are changes since commit 8bf22c33e7a172fbc72464f4cc484d23a6b412ba:
Merge tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
and are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue 200GbE
Aaron Ma (1):
ice: recap the VSI and QoS info after rebuild
Brian Vazquez (1):
idpf: change IRQ naming to match netdev and ethtool queue numbering
Jedrzej Jagielski (1):
ixgbevf: fix link setup issue
Li Li (4):
idpf: increment completion queue next_to_clean in sw marker wait
routine
idpf: skip deallocating bufq_sets from rx_qgrp if it is NULL
idpf: skip deallocating txq group's txqs if it is NULL
idpf: nullify pointers after they are freed
Michal Schmidt (1):
ice: fix crash in ethtool offline loopback test
Sreedevi Joshi (1):
idpf: Fix flow rule delete failure due to invalid validation
Thomas Gleixner (1):
i40e: Fix preempt count leak in napi poll tracepoint
Vitaly Lifshits (3):
e1000e: introduce new board type for Panther Lake PCH
e1000e: clear DPG_EN after reset to avoid autonomous power-gating
e1000e: correct TIMINCA on ADP/TGP systems with wrong XTAL frequency
drivers/net/ethernet/intel/e1000e/defines.h | 1 +
drivers/net/ethernet/intel/e1000e/e1000.h | 4 +-
drivers/net/ethernet/intel/e1000e/hw.h | 2 -
drivers/net/ethernet/intel/e1000e/ich8lan.c | 31 ++++++-
drivers/net/ethernet/intel/e1000e/netdev.c | 92 +++++++++++++++++--
drivers/net/ethernet/intel/i40e/i40e_trace.h | 2 +-
drivers/net/ethernet/intel/ice/ice.h | 1 +
drivers/net/ethernet/intel/ice/ice_base.c | 5 +-
drivers/net/ethernet/intel/ice/ice_ethtool.c | 4 +
drivers/net/ethernet/intel/ice/ice_idc.c | 44 +++++++--
drivers/net/ethernet/intel/ice/ice_lib.c | 15 ++-
drivers/net/ethernet/intel/ice/ice_main.c | 7 +-
.../net/ethernet/intel/idpf/idpf_ethtool.c | 3 -
drivers/net/ethernet/intel/idpf/idpf_lib.c | 1 +
drivers/net/ethernet/intel/idpf/idpf_txrx.c | 14 ++-
drivers/net/ethernet/intel/ixgbevf/vf.c | 3 +-
16 files changed, 191 insertions(+), 38 deletions(-)
--
2.47.1
next reply other threads:[~2026-02-20 0:40 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-20 0:40 Tony Nguyen [this message]
2026-02-20 0:40 ` [PATCH net 01/13] idpf: increment completion queue next_to_clean in sw marker wait routine Tony Nguyen
2026-02-20 0:40 ` [PATCH net 02/13] idpf: skip deallocating bufq_sets from rx_qgrp if it is NULL Tony Nguyen
2026-02-20 0:40 ` [PATCH net 03/13] idpf: skip deallocating txq group's txqs " Tony Nguyen
2026-02-20 0:40 ` [PATCH net 04/13] idpf: nullify pointers after they are freed Tony Nguyen
2026-02-20 0:40 ` [PATCH net 05/13] idpf: change IRQ naming to match netdev and ethtool queue numbering Tony Nguyen
2026-02-20 0:40 ` [PATCH net 06/13] idpf: Fix flow rule delete failure due to invalid validation Tony Nguyen
2026-02-20 0:40 ` [PATCH net 07/13] ice: recap the VSI and QoS info after rebuild Tony Nguyen
2026-02-20 0:40 ` [PATCH net 08/13] ice: fix crash in ethtool offline loopback test Tony Nguyen
2026-02-20 0:40 ` [PATCH net 09/13] i40e: Fix preempt count leak in napi poll tracepoint Tony Nguyen
2026-02-20 0:40 ` [PATCH net 10/13] ixgbevf: fix link setup issue Tony Nguyen
2026-02-20 0:40 ` [PATCH net 11/13] e1000e: introduce new board type for Panther Lake PCH Tony Nguyen
2026-02-20 0:40 ` [PATCH net 12/13] e1000e: clear DPG_EN after reset to avoid autonomous power-gating Tony Nguyen
2026-02-20 0:40 ` [PATCH net 13/13] e1000e: correct TIMINCA on ADP/TGP systems with wrong XTAL frequency Tony Nguyen
2026-02-22 16:28 ` [net,13/13] " Simon Horman
2026-02-24 22:59 ` Tony Nguyen
2026-02-25 0:11 ` Jakub Kicinski
2026-02-25 18:42 ` Tony Nguyen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260220004027.729384-1-anthony.l.nguyen@intel.com \
--to=anthony.l.nguyen@intel.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox