From: Simon Wunderlich <sw@simonwunderlich.de>
To: davem@davemloft.net, kuba@kernel.org
Cc: netdev@vger.kernel.org, b.a.t.m.a.n@lists.open-mesh.org,
"Sven Eckelmann" <sven@narfation.org>,
stable@vger.kernel.org,
"Christian Schmidbauer" <github@grische.xyz>,
"Sören Skaarup" <freifunk_nordm4nn@gmx.de>,
"Simon Wunderlich" <sw@simonwunderlich.de>
Subject: [PATCH net 1/1] batman-adv: Avoid double-rtnl_lock ELP metric worker
Date: Wed, 25 Feb 2026 09:46:14 +0100 [thread overview]
Message-ID: <20260225084614.229077-2-sw@simonwunderlich.de> (raw)
In-Reply-To: <20260225084614.229077-1-sw@simonwunderlich.de>
From: Sven Eckelmann <sven@narfation.org>
batadv_v_elp_get_throughput() might be called when the RTNL lock is already
held. This could be problematic when the work queue item is cancelled via
cancel_delayed_work_sync() in batadv_v_elp_iface_disable(). In this case,
an rtnl_lock() would cause a deadlock.
To avoid this, rtnl_trylock() was used in this function to skip the
retrieval of the ethtool information in case the RTNL lock was already
held.
But for cfg80211 interfaces, batadv_get_real_netdev() was called - which
also uses rtnl_lock(). The approach for __ethtool_get_link_ksettings() must
also be used instead and the lockless version __batadv_get_real_netdev()
has to be called.
Cc: stable@vger.kernel.org
Fixes: 8c8ecc98f5c6 ("batman-adv: Drop unmanaged ELP metric worker")
Reported-by: Christian Schmidbauer <github@grische.xyz>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Tested-by: Sören Skaarup <freifunk_nordm4nn@gmx.de>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
net/batman-adv/bat_v_elp.c | 10 +++++++++-
net/batman-adv/hard-interface.c | 8 ++++----
net/batman-adv/hard-interface.h | 1 +
3 files changed, 14 insertions(+), 5 deletions(-)
diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c
index cb16c1ed2a58f..fe832093d421f 100644
--- a/net/batman-adv/bat_v_elp.c
+++ b/net/batman-adv/bat_v_elp.c
@@ -111,7 +111,15 @@ static bool batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh,
/* unsupported WiFi driver version */
goto default_throughput;
- real_netdev = batadv_get_real_netdev(hard_iface->net_dev);
+ /* only use rtnl_trylock because the elp worker will be cancelled while
+ * the rntl_lock is held. the cancel_delayed_work_sync() would otherwise
+ * wait forever when the elp work_item was started and it is then also
+ * trying to rtnl_lock
+ */
+ if (!rtnl_trylock())
+ return false;
+ real_netdev = __batadv_get_real_netdev(hard_iface->net_dev);
+ rtnl_unlock();
if (!real_netdev)
goto default_throughput;
diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c
index 5113f879736b5..1c488049d5546 100644
--- a/net/batman-adv/hard-interface.c
+++ b/net/batman-adv/hard-interface.c
@@ -204,7 +204,7 @@ static bool batadv_is_valid_iface(const struct net_device *net_dev)
}
/**
- * batadv_get_real_netdevice() - check if the given netdev struct is a virtual
+ * __batadv_get_real_netdev() - check if the given netdev struct is a virtual
* interface on top of another 'real' interface
* @netdev: the device to check
*
@@ -214,7 +214,7 @@ static bool batadv_is_valid_iface(const struct net_device *net_dev)
* Return: the 'real' net device or the original net device and NULL in case
* of an error.
*/
-static struct net_device *batadv_get_real_netdevice(struct net_device *netdev)
+struct net_device *__batadv_get_real_netdev(struct net_device *netdev)
{
struct batadv_hard_iface *hard_iface = NULL;
struct net_device *real_netdev = NULL;
@@ -267,7 +267,7 @@ struct net_device *batadv_get_real_netdev(struct net_device *net_device)
struct net_device *real_netdev;
rtnl_lock();
- real_netdev = batadv_get_real_netdevice(net_device);
+ real_netdev = __batadv_get_real_netdev(net_device);
rtnl_unlock();
return real_netdev;
@@ -336,7 +336,7 @@ static u32 batadv_wifi_flags_evaluate(struct net_device *net_device)
if (batadv_is_cfg80211_netdev(net_device))
wifi_flags |= BATADV_HARDIF_WIFI_CFG80211_DIRECT;
- real_netdev = batadv_get_real_netdevice(net_device);
+ real_netdev = __batadv_get_real_netdev(net_device);
if (!real_netdev)
return wifi_flags;
diff --git a/net/batman-adv/hard-interface.h b/net/batman-adv/hard-interface.h
index 9db8a310961ea..9ba8fb2bdceb4 100644
--- a/net/batman-adv/hard-interface.h
+++ b/net/batman-adv/hard-interface.h
@@ -67,6 +67,7 @@ enum batadv_hard_if_bcast {
extern struct notifier_block batadv_hard_if_notifier;
+struct net_device *__batadv_get_real_netdev(struct net_device *net_device);
struct net_device *batadv_get_real_netdev(struct net_device *net_device);
bool batadv_is_cfg80211_hardif(struct batadv_hard_iface *hard_iface);
bool batadv_is_wifi_hardif(struct batadv_hard_iface *hard_iface);
--
2.47.3
next prev parent reply other threads:[~2026-02-25 8:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-25 8:46 [PATCH net 0/1] pull request: batman-adv 2025-05-09 Simon Wunderlich
2026-02-25 8:46 ` Simon Wunderlich [this message]
2026-02-27 3:30 ` [PATCH net 1/1] batman-adv: Avoid double-rtnl_lock ELP metric worker patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260225084614.229077-2-sw@simonwunderlich.de \
--to=sw@simonwunderlich.de \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
--cc=davem@davemloft.net \
--cc=freifunk_nordm4nn@gmx.de \
--cc=github@grische.xyz \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=sven@narfation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox