Re: [PATCH net-next 2/8] dt-bindings: net: lan9645x: add LAN9645X switch bindings

[Vladimir Oltean <olteanv@gmail.com>]

On Tue, Mar 03, 2026 at 01:22:28PM +0100, Jens Emil Schulz Østergaard wrote:
> +examples:
> +  - |
> +    soc {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +      ethernet-switch@0 {
> +        reg = <0>;
> +        compatible = "microchip,lan96459f-switch", "microchip,lan96455s-switch";
> +        pinctrl-0 = <&lan9645x_leds>;
> +        pinctrl-names = "default";
> +
> +        ethernet-ports {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          port@0 {
> +            reg = <0>;
> +            label = "lan0";

Please remove labels from DSA examples. They do not constitute best
practice, and it is preferable they don't leak into device trees by
promoting them through binding examples.

It is currently recommended to name DSA (like other) network interfaces
using udev rules set up by user space. Using labels is perhaps only
tolerated for cases where the udev implementation is sub-par, like
OpenWrt.