From: Sumit Garg <sumit.garg@kernel.org>
To: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org,
linux-media@vger.kernel.org, netdev@vger.kernel.org,
linux-wireless@vger.kernel.org, ath12k@lists.infradead.org,
linux-remoteproc@vger.kernel.org
Cc: andersson@kernel.org, konradybcio@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org,
robin.clark@oss.qualcomm.com, sean@poorly.run,
akhilpo@oss.qualcomm.com, lumag@kernel.org,
abhinav.kumar@linux.dev, jesszhan0024@gmail.com,
marijn.suijten@somainline.org, airlied@gmail.com,
simona@ffwll.ch, vikash.garodia@oss.qualcomm.com,
dikshita.agarwal@oss.qualcomm.com, bod@kernel.org,
mchehab@kernel.org, elder@kernel.org, andrew+netdev@lunn.ch,
davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com, jjohnson@kernel.org,
mathieu.poirier@linaro.org, trilokkumar.soni@oss.qualcomm.com,
mukesh.ojha@oss.qualcomm.com, pavan.kondeti@oss.qualcomm.com,
jorge.ramirez@oss.qualcomm.com, tonyh@qti.qualcomm.com,
vignesh.viswanathan@oss.qualcomm.com,
srinivas.kandagatla@oss.qualcomm.com,
amirreza.zarrabi@oss.qualcomm.com, jens.wiklander@linaro.org,
op-tee@lists.trustedfirmware.org, apurupa@qti.qualcomm.com,
skare@qti.qualcomm.com, Sumit Garg <sumit.garg@oss.qualcomm.com>
Subject: [PATCH 04/14] firmware: qcom: Add a PAS TEE service
Date: Fri, 6 Mar 2026 16:20:17 +0530 [thread overview]
Message-ID: <20260306105027.290375-5-sumit.garg@kernel.org> (raw)
In-Reply-To: <20260306105027.290375-1-sumit.garg@kernel.org>
From: Sumit Garg <sumit.garg@oss.qualcomm.com>
Add support for Peripheral Authentication Service (PAS) driver based
on TEE bus with OP-TEE providing the backend PAS service implementation.
The TEE PAS service ABI is designed to be extensible with additional API
as PTA_QCOM_PAS_CAPABILITIES. This allows to accommodate any future
extensions of the PAS service needed while still maintaining backwards
compatibility.
Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
---
drivers/firmware/qcom/Kconfig | 9 +
drivers/firmware/qcom/Makefile | 1 +
drivers/firmware/qcom/qcom_pas_tee.c | 478 +++++++++++++++++++++++++++
3 files changed, 488 insertions(+)
create mode 100644 drivers/firmware/qcom/qcom_pas_tee.c
diff --git a/drivers/firmware/qcom/Kconfig b/drivers/firmware/qcom/Kconfig
index 9a12ae2b639d..fff47abdaafd 100644
--- a/drivers/firmware/qcom/Kconfig
+++ b/drivers/firmware/qcom/Kconfig
@@ -14,6 +14,15 @@ config QCOM_PAS
backends plugged in whether it's an SCM implementation or a proper
TEE bus based PAS service implementation.
+config QCOM_PAS_TEE
+ tristate
+ select QCOM_PAS
+ depends on TEE
+ depends on !CPU_BIG_ENDIAN
+ help
+ Enable the generic Peripheral Authentication Service (PAS) provided
+ by the firmware TEE implementation as the backend.
+
config QCOM_SCM
select QCOM_PAS
select QCOM_TZMEM
diff --git a/drivers/firmware/qcom/Makefile b/drivers/firmware/qcom/Makefile
index dc5ab45f906a..48801d18f37b 100644
--- a/drivers/firmware/qcom/Makefile
+++ b/drivers/firmware/qcom/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_QCOM_TZMEM) += qcom_tzmem.o
obj-$(CONFIG_QCOM_QSEECOM) += qcom_qseecom.o
obj-$(CONFIG_QCOM_QSEECOM_UEFISECAPP) += qcom_qseecom_uefisecapp.o
obj-$(CONFIG_QCOM_PAS) += qcom_pas.o
+obj-$(CONFIG_QCOM_PAS_TEE) += qcom_pas_tee.o
diff --git a/drivers/firmware/qcom/qcom_pas_tee.c b/drivers/firmware/qcom/qcom_pas_tee.c
new file mode 100644
index 000000000000..84cd4d62058c
--- /dev/null
+++ b/drivers/firmware/qcom/qcom_pas_tee.c
@@ -0,0 +1,478 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/firmware/qcom/qcom_pas.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/tee_drv.h>
+#include <linux/uuid.h>
+
+#include "qcom_pas.h"
+
+/*
+ * Peripheral Authentication Service (PAS) supported.
+ *
+ * [in] params[0].value.a: Unique 32bit remote processor identifier
+ */
+#define PTA_QCOM_PAS_IS_SUPPORTED 1
+
+/*
+ * PAS capabilities.
+ *
+ * [in] params[0].value.a: Unique 32bit remote processor identifier
+ * [out] params[1].value.a: PAS capability flags
+ */
+#define PTA_QCOM_PAS_CAPABILITIES 2
+
+/*
+ * PAS image initialization.
+ *
+ * [in] params[0].value.a: Unique 32bit remote processor identifier
+ * [in] params[1].memref: Loadable firmware metadata
+ */
+#define PTA_QCOM_PAS_INIT_IMAGE 3
+
+/*
+ * PAS memory setup.
+ *
+ * [in] params[0].value.a: Unique 32bit remote processor identifier
+ * [in] params[0].value.b: Relocatable firmware size
+ * [in] params[1].value.a: 32bit LSB relocatable firmware memory address
+ * [in] params[1].value.b: 32bit MSB relocatable firmware memory address
+ */
+#define PTA_QCOM_PAS_MEM_SETUP 4
+
+/*
+ * PAS get resource table.
+ *
+ * [in] params[0].value.a: Unique 32bit remote processor identifier
+ * [inout] params[1].memref: Resource table config
+ */
+#define PTA_QCOM_PAS_GET_RESOURCE_TABLE 5
+
+/*
+ * PAS image authentication and co-processor reset.
+ *
+ * [in] params[0].value.a: Unique 32bit remote processor identifier
+ * [in] params[0].value.b: Firmware size
+ * [in] params[1].value.a: 32bit LSB firmware memory address
+ * [in] params[1].value.b: 32bit MSB firmware memory address
+ * [in] params[2].memref: Optional fw memory space shared/lent
+ */
+#define PTA_QCOM_PAS_AUTH_AND_RESET 6
+
+/*
+ * PAS co-processor set suspend/resume state.
+ *
+ * [in] params[0].value.a: Unique 32bit remote processor identifier
+ * [in] params[0].value.b: Co-processor state identifier
+ */
+#define PTA_QCOM_PAS_SET_REMOTE_STATE 7
+
+/*
+ * PAS co-processor shutdown.
+ *
+ * [in] params[0].value.a: Unique 32bit remote processor identifier
+ */
+#define PTA_QCOM_PAS_SHUTDOWN 8
+
+#define TEE_NUM_PARAMS 4
+
+/**
+ * struct qcom_pas_tee_private - PAS service private data
+ * @dev: PAS service device.
+ * @ctx: TEE context handler.
+ * @session_id: PAS TA session identifier.
+ */
+struct qcom_pas_tee_private {
+ struct device *dev;
+ struct tee_context *ctx;
+ u32 session_id;
+};
+
+static bool qcom_pas_tee_supported(struct device *dev, u32 pas_id)
+{
+ struct qcom_pas_tee_private *data = dev_get_drvdata(dev);
+ struct tee_ioctl_invoke_arg inv_arg = {
+ .func = PTA_QCOM_PAS_IS_SUPPORTED,
+ .session = data->session_id,
+ .num_params = TEE_NUM_PARAMS
+ };
+ struct tee_param param[4] = {
+ [0] = {
+ .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
+ .u.value.a = pas_id
+ }
+ };
+ int ret;
+
+ ret = tee_client_invoke_func(data->ctx, &inv_arg, param);
+ if (ret < 0 || inv_arg.ret != 0) {
+ dev_err(dev, "PAS not supported, pas_id: %d, err: %x\n",
+ pas_id, inv_arg.ret);
+ return false;
+ }
+
+ return true;
+}
+
+static int qcom_pas_tee_init_image(struct device *dev, u32 pas_id,
+ const void *metadata, size_t size,
+ struct qcom_pas_context *ctx)
+{
+ struct qcom_pas_tee_private *data = dev_get_drvdata(dev);
+ struct tee_ioctl_invoke_arg inv_arg = {
+ .func = PTA_QCOM_PAS_INIT_IMAGE,
+ .session = data->session_id,
+ .num_params = TEE_NUM_PARAMS
+ };
+ struct tee_param param[4] = {
+ [0] = {
+ .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
+ .u.value.a = pas_id
+ },
+ [1] = {
+ .attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT,
+ }
+ };
+ struct tee_shm *mdata_shm;
+ u8 *mdata_buf = NULL;
+ int ret;
+
+ mdata_shm = tee_shm_alloc_kernel_buf(data->ctx, size);
+ if (IS_ERR(mdata_shm)) {
+ dev_err(dev, "mdata_shm allocation failed\n");
+ return PTR_ERR(mdata_shm);
+ }
+
+ mdata_buf = tee_shm_get_va(mdata_shm, 0);
+ if (IS_ERR(mdata_buf)) {
+ dev_err(dev, "mdata_buf get VA failed\n");
+ tee_shm_free(mdata_shm);
+ return PTR_ERR(mdata_buf);
+ }
+ memcpy(mdata_buf, metadata, size);
+
+ param[1].u.memref.shm = mdata_shm;
+ param[1].u.memref.size = size;
+
+ ret = tee_client_invoke_func(data->ctx, &inv_arg, param);
+ if (ret < 0 || inv_arg.ret != 0) {
+ dev_err(dev, "PAS init image failed, pas_id: %d, err: %x\n",
+ pas_id, inv_arg.ret);
+ tee_shm_free(mdata_shm);
+ return -EINVAL;
+ }
+ ctx->ptr = (void *)mdata_shm;
+
+ return 0;
+}
+
+static int qcom_pas_tee_mem_setup(struct device *dev, u32 pas_id,
+ phys_addr_t addr, phys_addr_t size)
+{
+ struct qcom_pas_tee_private *data = dev_get_drvdata(dev);
+ struct tee_ioctl_invoke_arg inv_arg = {
+ .func = PTA_QCOM_PAS_MEM_SETUP,
+ .session = data->session_id,
+ .num_params = TEE_NUM_PARAMS
+ };
+ struct tee_param param[4] = {
+ [0] = {
+ .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
+ .u.value.a = pas_id,
+ .u.value.b = size,
+ },
+ [1] = {
+ .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
+ .u.value.a = lower_32_bits(addr),
+ .u.value.b = upper_32_bits(addr),
+ }
+ };
+ int ret;
+
+ ret = tee_client_invoke_func(data->ctx, &inv_arg, param);
+ if (ret < 0 || inv_arg.ret != 0) {
+ dev_err(dev, "PAS mem setup failed, pas_id: %d, err: %x\n",
+ pas_id, inv_arg.ret);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+DEFINE_FREE(shm_free, struct tee_shm *, tee_shm_free(_T))
+
+static void *qcom_pas_tee_get_rsc_table(struct device *dev,
+ struct qcom_pas_context *ctx,
+ void *input_rt, size_t input_rt_size,
+ size_t *output_rt_size)
+{
+ struct qcom_pas_tee_private *data = dev_get_drvdata(dev);
+ struct tee_ioctl_invoke_arg inv_arg = {
+ .func = PTA_QCOM_PAS_GET_RESOURCE_TABLE,
+ .session = data->session_id,
+ .num_params = TEE_NUM_PARAMS
+ };
+ struct tee_param param[4] = {
+ [0] = {
+ .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
+ .u.value.a = ctx->pas_id,
+ },
+ [1] = {
+ .attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT,
+ .u.memref.size = input_rt_size,
+ }
+ };
+ void *rt_buf = NULL;
+ int ret;
+
+ ret = tee_client_invoke_func(data->ctx, &inv_arg, param);
+ if (ret < 0 || inv_arg.ret != 0) {
+ dev_err(dev, "PAS get RT failed, pas_id: %d, err: %x\n",
+ ctx->pas_id, inv_arg.ret);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (param[1].u.memref.size) {
+ struct tee_shm *rt_shm __free(shm_free) =
+ tee_shm_alloc_kernel_buf(data->ctx,
+ param[1].u.memref.size);
+ void *rt_shm_va;
+
+ if (IS_ERR(rt_shm)) {
+ dev_err(dev, "rt_shm allocation failed\n");
+ return rt_shm;
+ }
+
+ rt_shm_va = tee_shm_get_va(rt_shm, 0);
+ if (IS_ERR_OR_NULL(rt_shm_va)) {
+ dev_err(dev, "rt_shm get VA failed\n");
+ return ERR_PTR(-EINVAL);
+ }
+ memcpy(rt_shm_va, input_rt, input_rt_size);
+
+ param[1].u.memref.shm = rt_shm;
+ ret = tee_client_invoke_func(data->ctx, &inv_arg, param);
+ if (ret < 0 || inv_arg.ret != 0) {
+ dev_err(dev, "PAS get RT failed, pas_id: %d, err: %x\n",
+ ctx->pas_id, inv_arg.ret);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (param[1].u.memref.size) {
+ *output_rt_size = param[1].u.memref.size;
+ rt_buf = kmalloc(param[1].u.memref.size, GFP_KERNEL);
+ if (!rt_buf)
+ return ERR_PTR(-ENOMEM);
+
+ memcpy(rt_buf, rt_shm_va, *output_rt_size);
+ }
+ }
+
+ return rt_buf;
+}
+
+static int __qcom_pas_tee_auth_and_reset(struct device *dev, u32 pas_id,
+ phys_addr_t mem_phys, size_t mem_size)
+{
+ struct qcom_pas_tee_private *data = dev_get_drvdata(dev);
+ struct tee_ioctl_invoke_arg inv_arg = {
+ .func = PTA_QCOM_PAS_AUTH_AND_RESET,
+ .session = data->session_id,
+ .num_params = TEE_NUM_PARAMS
+ };
+ struct tee_param param[4] = {
+ [0] = {
+ .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
+ .u.value.a = pas_id,
+ .u.value.b = mem_size,
+ },
+ [1] = {
+ .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
+ .u.value.a = lower_32_bits(mem_phys),
+ .u.value.b = upper_32_bits(mem_phys),
+ },
+ /* Reserved for fw memory space to be shared or lent */
+ [2] = {
+ .attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT,
+ }
+ };
+ int ret;
+
+ ret = tee_client_invoke_func(data->ctx, &inv_arg, param);
+ if (ret < 0 || inv_arg.ret != 0) {
+ dev_err(dev, "PAS auth reset failed, pas_id: %d, err: %x\n",
+ pas_id, inv_arg.ret);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int qcom_pas_tee_auth_and_reset(struct device *dev, u32 pas_id)
+{
+ return __qcom_pas_tee_auth_and_reset(dev, pas_id, 0, 0);
+}
+
+static int qcom_pas_tee_prepare_and_auth_reset(struct device *dev,
+ struct qcom_pas_context *ctx)
+{
+ return __qcom_pas_tee_auth_and_reset(dev, ctx->pas_id, ctx->mem_phys,
+ ctx->mem_size);
+}
+
+static int qcom_pas_tee_set_remote_state(struct device *dev, u32 state,
+ u32 pas_id)
+{
+ struct qcom_pas_tee_private *data = dev_get_drvdata(dev);
+ struct tee_ioctl_invoke_arg inv_arg = {
+ .func = PTA_QCOM_PAS_SET_REMOTE_STATE,
+ .session = data->session_id,
+ .num_params = TEE_NUM_PARAMS
+ };
+ struct tee_param param[4] = {
+ [0] = {
+ .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
+ .u.value.a = pas_id,
+ .u.value.b = state,
+ }
+ };
+ int ret;
+
+ ret = tee_client_invoke_func(data->ctx, &inv_arg, param);
+ if (ret < 0 || inv_arg.ret != 0) {
+ dev_err(dev, "PAS shutdown failed, pas_id: %d, err: %x\n",
+ pas_id, inv_arg.ret);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int qcom_pas_tee_shutdown(struct device *dev, u32 pas_id)
+{
+ struct qcom_pas_tee_private *data = dev_get_drvdata(dev);
+ struct tee_ioctl_invoke_arg inv_arg = {
+ .func = PTA_QCOM_PAS_SHUTDOWN,
+ .session = data->session_id,
+ .num_params = TEE_NUM_PARAMS
+ };
+ struct tee_param param[4] = {
+ [0] = {
+ .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
+ .u.value.a = pas_id
+ }
+ };
+ int ret = 0;
+
+ ret = tee_client_invoke_func(data->ctx, &inv_arg, param);
+ if (ret < 0 || inv_arg.ret != 0) {
+ dev_err(dev, "PAS shutdown failed, pas_id: %d, err: %x\n",
+ pas_id, inv_arg.ret);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void qcom_pas_tee_metadata_release(struct device *dev,
+ struct qcom_pas_context *ctx)
+{
+ struct tee_shm *mdata_shm = ctx->ptr;
+
+ tee_shm_free(mdata_shm);
+}
+
+static struct qcom_pas_ops qcom_pas_ops_tee = {
+ .drv_name = "qcom-pas-tee",
+ .supported = qcom_pas_tee_supported,
+ .init_image = qcom_pas_tee_init_image,
+ .mem_setup = qcom_pas_tee_mem_setup,
+ .get_rsc_table = qcom_pas_tee_get_rsc_table,
+ .auth_and_reset = qcom_pas_tee_auth_and_reset,
+ .prepare_and_auth_reset = qcom_pas_tee_prepare_and_auth_reset,
+ .set_remote_state = qcom_pas_tee_set_remote_state,
+ .shutdown = qcom_pas_tee_shutdown,
+ .metadata_release = qcom_pas_tee_metadata_release,
+};
+
+static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
+{
+ return ver->impl_id == TEE_IMPL_ID_OPTEE;
+}
+
+static int qcom_pas_tee_probe(struct tee_client_device *pas_dev)
+{
+ struct device *dev = &pas_dev->dev;
+ struct qcom_pas_tee_private *data;
+ struct tee_ioctl_open_session_arg sess_arg = {
+ .clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL
+ };
+ int ret, err = -ENODEV;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL);
+ if (IS_ERR(data->ctx))
+ return -ENODEV;
+
+ export_uuid(sess_arg.uuid, &pas_dev->id.uuid);
+ ret = tee_client_open_session(data->ctx, &sess_arg, NULL);
+ if ((ret < 0) || (sess_arg.ret != 0)) {
+ dev_err(dev, "tee_client_open_session failed, err: %x\n",
+ sess_arg.ret);
+ err = -EINVAL;
+ goto out_ctx;
+ }
+
+ data->session_id = sess_arg.session;
+ dev_set_drvdata(dev, data);
+ qcom_pas_ops_tee.dev = dev;
+ qcom_pas_ops_register(&qcom_pas_ops_tee);
+
+ return 0;
+out_ctx:
+ tee_client_close_context(data->ctx);
+
+ return err;
+}
+
+static void qcom_pas_tee_remove(struct tee_client_device *pas_dev)
+{
+ struct device *dev = &pas_dev->dev;
+ struct qcom_pas_tee_private *data = dev_get_drvdata(dev);
+
+ qcom_pas_ops_unregister();
+ tee_client_close_session(data->ctx, data->session_id);
+ tee_client_close_context(data->ctx);
+}
+
+static const struct tee_client_device_id qcom_pas_tee_id_table[] = {
+ {UUID_INIT(0xcff7d191, 0x7ca0, 0x4784,
+ 0xaf, 0x13, 0x48, 0x22, 0x3b, 0x9a, 0x4f, 0xbe)},
+ {}
+};
+MODULE_DEVICE_TABLE(tee, qcom_pas_tee_id_table);
+
+static struct tee_client_driver optee_pas_tee_driver = {
+ .probe = qcom_pas_tee_probe,
+ .remove = qcom_pas_tee_remove,
+ .id_table = qcom_pas_tee_id_table,
+ .driver = {
+ .name = "qcom-pas-tee",
+ },
+};
+
+module_tee_client_driver(optee_pas_tee_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sumit Garg <sumit.garg@oss.qualcomm.com>");
+MODULE_DESCRIPTION("TEE bus based Qualcomm PAS driver");
--
2.51.0
next prev parent reply other threads:[~2026-03-06 10:52 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-06 10:50 [PATCH 00/14] firmware: qcom: Add OP-TEE PAS service support Sumit Garg
2026-03-06 10:50 ` [PATCH 01/14] arm64: dts: qcom: kodiak: Add EL2 overlay Sumit Garg
2026-03-09 8:00 ` Mukesh Ojha
2026-03-09 8:09 ` Sumit Garg
2026-03-06 10:50 ` [PATCH 02/14] firmware: qcom: Add a generic PAS service Sumit Garg
2026-03-06 11:15 ` Krzysztof Kozlowski
2026-03-09 4:55 ` Sumit Garg
2026-03-09 7:10 ` Krzysztof Kozlowski
2026-03-09 7:16 ` Sumit Garg
2026-03-10 4:58 ` Sumit Garg
2026-03-06 15:40 ` Jeff Johnson
2026-03-06 15:49 ` Jeff Johnson
2026-03-09 5:03 ` Sumit Garg
2026-03-06 19:47 ` Trilok Soni
2026-03-06 20:00 ` Trilok Soni
2026-03-06 22:00 ` Jeff Johnson
2026-03-06 22:16 ` Trilok Soni
2026-03-09 6:36 ` Sumit Garg
2026-03-10 7:33 ` Trilok Soni
2026-03-09 6:25 ` Sumit Garg
2026-03-06 10:50 ` [PATCH 03/14] firmware: qcom_scm: Migrate to " Sumit Garg
2026-03-06 10:50 ` Sumit Garg [this message]
2026-03-06 10:50 ` [PATCH 05/14] remoteproc: qcom_q6v5_pas: Switch over to generic PAS TZ APIs Sumit Garg
2026-03-06 10:50 ` [PATCH 06/14] remoteproc: qcom_q6v5_mss: Switch " Sumit Garg
2026-03-06 10:50 ` [PATCH 07/14] soc: qcom: mdtloader: " Sumit Garg
2026-03-06 10:50 ` [PATCH 08/14] remoteproc: qcom_wcnss: " Sumit Garg
2026-03-06 10:50 ` [PATCH 09/14] remoteproc: qcom: Select QCOM_PAS_TEE service backend Sumit Garg
2026-03-06 10:50 ` [PATCH 10/14] drm/msm: Switch to generic PAS TZ APIs Sumit Garg
2026-03-25 4:34 ` Dmitry Baryshkov
2026-03-26 8:50 ` Sumit Garg
2026-03-06 10:50 ` [PATCH 11/14] media: qcom: " Sumit Garg
2026-03-09 9:12 ` Jorge Ramirez
2026-03-10 5:04 ` Sumit Garg
2026-03-10 11:18 ` Konrad Dybcio
2026-03-11 5:47 ` Sumit Garg
2026-03-06 10:50 ` [PATCH 12/14] net: ipa: " Sumit Garg
2026-03-06 10:50 ` [PATCH 13/14] wifi: ath12k: " Sumit Garg
2026-03-06 15:52 ` Jeff Johnson
2026-03-06 10:50 ` [PATCH 14/14] firmware: qcom_scm: Remove SCM PAS wrappers Sumit Garg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260306105027.290375-5-sumit.garg@kernel.org \
--to=sumit.garg@kernel.org \
--cc=abhinav.kumar@linux.dev \
--cc=airlied@gmail.com \
--cc=akhilpo@oss.qualcomm.com \
--cc=amirreza.zarrabi@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=apurupa@qti.qualcomm.com \
--cc=ath12k@lists.infradead.org \
--cc=bod@kernel.org \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dikshita.agarwal@oss.qualcomm.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=edumazet@google.com \
--cc=elder@kernel.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jens.wiklander@linaro.org \
--cc=jesszhan0024@gmail.com \
--cc=jjohnson@kernel.org \
--cc=jorge.ramirez@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=lumag@kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=mathieu.poirier@linaro.org \
--cc=mchehab@kernel.org \
--cc=mukesh.ojha@oss.qualcomm.com \
--cc=netdev@vger.kernel.org \
--cc=op-tee@lists.trustedfirmware.org \
--cc=pabeni@redhat.com \
--cc=pavan.kondeti@oss.qualcomm.com \
--cc=robh@kernel.org \
--cc=robin.clark@oss.qualcomm.com \
--cc=sean@poorly.run \
--cc=simona@ffwll.ch \
--cc=skare@qti.qualcomm.com \
--cc=srinivas.kandagatla@oss.qualcomm.com \
--cc=sumit.garg@oss.qualcomm.com \
--cc=tonyh@qti.qualcomm.com \
--cc=trilokkumar.soni@oss.qualcomm.com \
--cc=vignesh.viswanathan@oss.qualcomm.com \
--cc=vikash.garodia@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox