[PATCH v3 net 3/3] amd-xgbe: reset PHY settings before starting PHY

[Raju Rangoju <Raju.Rangoju@amd.com>]

commit f93505f35745 ("amd-xgbe: let the MAC manage PHY PM") moved
xgbe_phy_reset() from xgbe_open() to xgbe_start(), placing it after
phy_start(). As a result, the PHY settings were being reset after the
PHY had already started.

Reorder the calls so that the PHY settings are reset before
phy_start() is invoked.

Fixes: f93505f35745 ("amd-xgbe: let the MAC manage PHY PM")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
---
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
index 39da2f811858..23beea48ae26 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
@@ -1271,6 +1271,12 @@ static int xgbe_start(struct xgbe_prv_data *pdata)
 	if (ret)
 		goto err_napi;
 
+	/* Reset the phy settings */
+	ret = xgbe_phy_reset(pdata);
+	if (ret)
+		goto err_irqs;
+
+	/* Start the phy */
 	ret = phy_if->phy_start(pdata);
 	if (ret)
 		goto err_irqs;
@@ -1284,11 +1290,6 @@ static int xgbe_start(struct xgbe_prv_data *pdata)
 
 	udp_tunnel_nic_reset_ntf(netdev);
 
-	/* Reset the phy settings */
-	ret = xgbe_phy_reset(pdata);
-	if (ret)
-		goto err_txrx;
-
 	netif_tx_start_all_queues(netdev);
 
 	xgbe_start_timers(pdata);
@@ -1298,10 +1299,6 @@ static int xgbe_start(struct xgbe_prv_data *pdata)
 
 	return 0;
 
-err_txrx:
-	hw_if->disable_rx(pdata);
-	hw_if->disable_tx(pdata);
-
 err_irqs:
 	xgbe_free_irqs(pdata);
 
-- 
2.34.1