From: Raju Rangoju <Raju.Rangoju@amd.com>
To: <netdev@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <pabeni@redhat.com>,
<kuba@kernel.org>, <edumazet@google.com>, <davem@davemloft.net>,
<andrew+netdev@lunn.ch>, "Raju Rangoju" <Raju.Rangoju@amd.com>
Subject: [PATCH net-next v2 1/2] amd-xgbe: Simplify powerdown/powerup paths
Date: Sun, 8 Mar 2026 14:58:50 +0530 [thread overview]
Message-ID: <20260308092851.1510214-2-Raju.Rangoju@amd.com> (raw)
In-Reply-To: <20260308092851.1510214-1-Raju.Rangoju@amd.com>
The caller parameter in xgbe_powerdown() and xgbe_powerup() was intended
to differentiate between driver and ioctl contexts, but the only
remaining usage is from the driver suspend/resume path.
Simplify this by:
- Removing the unused XGMAC_DRIVER_CONTEXT and XGMAC_IOCTL_CONTEXT
macros
- Dropping the now-unused caller parameter
- Reordering operations in xgbe_powerdown() to disable NAPI before
stopping TX/RX, matching the order used in xgbe_stop()
This makes the powerdown/powerup paths easier to follow and keeps the
ordering consistent with the rest of the driver.
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
---
Changes since v1:
- Fix compiler warnings when CONFIG_PM_SLEEP is not enabled.
drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 47 ++++++++-----------
drivers/net/ethernet/amd/xgbe/xgbe-pci.c | 16 +++----
drivers/net/ethernet/amd/xgbe/xgbe-platform.c | 4 +-
drivers/net/ethernet/amd/xgbe/xgbe.h | 8 +---
4 files changed, 32 insertions(+), 43 deletions(-)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
index 8b79d88480db..d57daf6306e1 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
@@ -1116,69 +1116,62 @@ static int xgbe_phy_reset(struct xgbe_prv_data *pdata)
return pdata->phy_if.phy_reset(pdata);
}
-int xgbe_powerdown(struct net_device *netdev, unsigned int caller)
+int xgbe_powerdown(struct net_device *netdev)
{
struct xgbe_prv_data *pdata = netdev_priv(netdev);
struct xgbe_hw_if *hw_if = &pdata->hw_if;
- DBGPR("-->xgbe_powerdown\n");
-
- if (!netif_running(netdev) ||
- (caller == XGMAC_IOCTL_CONTEXT && pdata->power_down)) {
- netdev_alert(netdev, "Device is already powered down\n");
- DBGPR("<--xgbe_powerdown\n");
+ if (!netif_running(netdev)) {
+ netdev_dbg(netdev, "Device is not running, skipping powerdown\n");
return -EINVAL;
}
- if (caller == XGMAC_DRIVER_CONTEXT)
- netif_device_detach(netdev);
+ if (pdata->power_down) {
+ netdev_dbg(netdev, "Device is already powered down\n");
+ return -EINVAL;
+ }
+ netif_device_detach(netdev);
netif_tx_stop_all_queues(netdev);
xgbe_stop_timers(pdata);
flush_workqueue(pdata->dev_workqueue);
+ xgbe_napi_disable(pdata, 0);
+
hw_if->powerdown_tx(pdata);
hw_if->powerdown_rx(pdata);
- xgbe_napi_disable(pdata, 0);
-
pdata->power_down = 1;
- DBGPR("<--xgbe_powerdown\n");
-
return 0;
}
-int xgbe_powerup(struct net_device *netdev, unsigned int caller)
+int xgbe_powerup(struct net_device *netdev)
{
struct xgbe_prv_data *pdata = netdev_priv(netdev);
struct xgbe_hw_if *hw_if = &pdata->hw_if;
- DBGPR("-->xgbe_powerup\n");
-
- if (!netif_running(netdev) ||
- (caller == XGMAC_IOCTL_CONTEXT && !pdata->power_down)) {
- netdev_alert(netdev, "Device is already powered up\n");
- DBGPR("<--xgbe_powerup\n");
+ if (!netif_running(netdev)) {
+ netdev_dbg(netdev, "Device is not running, skipping powerup\n");
return -EINVAL;
}
- pdata->power_down = 0;
-
- xgbe_napi_enable(pdata, 0);
+ if (!pdata->power_down) {
+ netdev_dbg(netdev, "Device is already powered up\n");
+ return -EINVAL;
+ }
hw_if->powerup_tx(pdata);
hw_if->powerup_rx(pdata);
- if (caller == XGMAC_DRIVER_CONTEXT)
- netif_device_attach(netdev);
+ xgbe_napi_enable(pdata, 0);
netif_tx_start_all_queues(netdev);
-
xgbe_start_timers(pdata);
+ netif_device_attach(netdev);
- DBGPR("<--xgbe_powerup\n");
+ pdata->power_down = 0;
return 0;
}
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-pci.c b/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
index f54a5040a493..9e09b269cb1d 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
@@ -360,14 +360,14 @@ static void xgbe_pci_remove(struct pci_dev *pdev)
xgbe_free_pdata(pdata);
}
-static int __maybe_unused xgbe_pci_suspend(struct device *dev)
+static int xgbe_pci_suspend(struct device *dev)
{
struct xgbe_prv_data *pdata = dev_get_drvdata(dev);
struct net_device *netdev = pdata->netdev;
int ret = 0;
if (netif_running(netdev))
- ret = xgbe_powerdown(netdev, XGMAC_DRIVER_CONTEXT);
+ ret = xgbe_powerdown(netdev);
pdata->lpm_ctrl = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
pdata->lpm_ctrl |= MDIO_CTRL1_LPOWER;
@@ -376,7 +376,7 @@ static int __maybe_unused xgbe_pci_suspend(struct device *dev)
return ret;
}
-static int __maybe_unused xgbe_pci_resume(struct device *dev)
+static int xgbe_pci_resume(struct device *dev)
{
struct xgbe_prv_data *pdata = dev_get_drvdata(dev);
struct net_device *netdev = pdata->netdev;
@@ -388,7 +388,7 @@ static int __maybe_unused xgbe_pci_resume(struct device *dev)
XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, pdata->lpm_ctrl);
if (netif_running(netdev)) {
- ret = xgbe_powerup(netdev, XGMAC_DRIVER_CONTEXT);
+ ret = xgbe_powerup(netdev);
/* Schedule a restart in case the link or phy state changed
* while we were powered down.
@@ -461,16 +461,16 @@ static const struct pci_device_id xgbe_pci_table[] = {
};
MODULE_DEVICE_TABLE(pci, xgbe_pci_table);
-static SIMPLE_DEV_PM_OPS(xgbe_pci_pm_ops, xgbe_pci_suspend, xgbe_pci_resume);
+static DEFINE_SIMPLE_DEV_PM_OPS(xgbe_pci_pm_ops,
+ xgbe_pci_suspend,
+ xgbe_pci_resume);
static struct pci_driver xgbe_driver = {
.name = XGBE_DRV_NAME,
.id_table = xgbe_pci_table,
.probe = xgbe_pci_probe,
.remove = xgbe_pci_remove,
- .driver = {
- .pm = &xgbe_pci_pm_ops,
- }
+ .driver.pm = pm_sleep_ptr(&xgbe_pci_pm_ops),
};
int xgbe_pci_init(void)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-platform.c b/drivers/net/ethernet/amd/xgbe/xgbe-platform.c
index 47d53e59ccf6..98b03a3f3a95 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-platform.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-platform.c
@@ -384,7 +384,7 @@ static int xgbe_platform_suspend(struct device *dev)
DBGPR("-->xgbe_suspend\n");
if (netif_running(netdev))
- ret = xgbe_powerdown(netdev, XGMAC_DRIVER_CONTEXT);
+ ret = xgbe_powerdown(netdev);
pdata->lpm_ctrl = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
pdata->lpm_ctrl |= MDIO_CTRL1_LPOWER;
@@ -407,7 +407,7 @@ static int xgbe_platform_resume(struct device *dev)
XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, pdata->lpm_ctrl);
if (netif_running(netdev)) {
- ret = xgbe_powerup(netdev, XGMAC_DRIVER_CONTEXT);
+ ret = xgbe_powerup(netdev);
/* Schedule a restart in case the link or phy state changed
* while we were powered down.
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe.h b/drivers/net/ethernet/amd/xgbe/xgbe.h
index 4333d269ee84..3b9345506c2b 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe.h
@@ -146,10 +146,6 @@
#define XGBE_MAX_PPS_OUT 4
#define XGBE_MAX_AUX_SNAP 4
-/* Driver PMT macros */
-#define XGMAC_DRIVER_CONTEXT 1
-#define XGMAC_IOCTL_CONTEXT 2
-
#define XGMAC_FIFO_MIN_ALLOC 2048
#define XGMAC_FIFO_UNIT 256
#define XGMAC_FIFO_ALIGN(_x) \
@@ -1309,8 +1305,8 @@ void xgbe_dump_rx_desc(struct xgbe_prv_data *, struct xgbe_ring *,
unsigned int);
void xgbe_print_pkt(struct net_device *, struct sk_buff *, bool);
void xgbe_get_all_hw_features(struct xgbe_prv_data *);
-int xgbe_powerup(struct net_device *, unsigned int);
-int xgbe_powerdown(struct net_device *, unsigned int);
+int xgbe_powerup(struct net_device *netdev);
+int xgbe_powerdown(struct net_device *netdev);
void xgbe_init_rx_coalesce(struct xgbe_prv_data *);
void xgbe_init_tx_coalesce(struct xgbe_prv_data *);
void xgbe_restart_dev(struct xgbe_prv_data *pdata);
--
2.34.1
next prev parent reply other threads:[~2026-03-08 9:29 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-08 9:28 [PATCH net-next v2 0/2] amd-xgbe: Improve power management for S0i3 Raju Rangoju
2026-03-08 9:28 ` Raju Rangoju [this message]
2026-03-08 9:28 ` [PATCH net-next v2 2/2] amd-xgbe: add PCI power management for S0i3 support Raju Rangoju
2026-03-11 3:00 ` [PATCH net-next v2 0/2] amd-xgbe: Improve power management for S0i3 patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260308092851.1510214-2-Raju.Rangoju@amd.com \
--to=raju.rangoju@amd.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox