[PATCH v2 phy-next 00/24] Split Generic PHY consumer and provider API

[PATCH v2 phy-next 00/24] Split Generic PHY consumer and provider API

[vladimir.oltean]

The biggest problem requiring this split is the fact that consumer
drivers poke around in struct phy, accessing fields which shouldn't be
visible to them. Follow the example of mux, gpio, iio, spi offload,
pwrsec, pinctrl and regulator, which each expose separate headers for
consumers and providers.

Some off-list discussions were had with Vinod Koul regarding the 3 PHY
providers outside the drivers/phy/ subsystem. It was agreed that it is
desirable to relocate them to drivers/phy/, rather than to publish
phy-provider.h to include/linux/phy/ for liberal use. Only phy.h and
(new) phy-props.h - consumer-facing headers - stay there.

The hope is that developers get a hint when they need to include the
wrong header to get their job done.

If that fails, patch 24/24 adds a regex in the MAINTAINERS entry that
ensures linux-phy is copied on all Generic PHY patches, for an extra set
of eyes.

Requested merge strategy, I hope this works for everyone:
- Subsystem maintainers ACK their affected portions
- Entire series goes through linux-phy
- linux-phy provides stable tag
- (optionally) Said tag is merged back into affected subsystem 'next'
  branches. Those who prefer can handle merge conflicts when they send
  their PR.

Detailed change log in patches, summary below.

v1->v2:
- split "phy: include PHY provider header" into smaller chunks to work
  around mailing list moderation due to patch size
- improve MAINTAINERS regex pattern
- make all PHY attribute helpers NULL-tolerant. Not just the new
  phy_get_bus_width(), but also retroactively, the existing ones.
- fixed the temporary include path from <linux/phy/phy.h> to
  "phy-provider.h", removed anyway by the end of the series
- logical bug fixes in the PCI controller <-> PHY device link removal
  and Exynos UFS PHY API rework

In case anyone wants to test the series, here it is on top of linux-phy/next:
https://github.com/vladimiroltean/linux/tree/phy-split-consumer-provider-v2

v1 at:
https://lore.kernel.org/linux-phy/20260304175735.2660419-13-vladimir.oltean@nxp.com/

Cc: Abhinav Kumar <abhinav.kumar@linux.dev>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: "André Draszik" <andre.draszik@linaro.org>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Chen-Yu Tsai <wens@kernel.org>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Daniel Machon <daniel.machon@microchip.com>
Cc: David Airlie <airlied@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dmitry Baryshkov <lumag@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Frank Li <Frank.Li@nxp.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Jessica Zhang <jesszhan0024@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Kevin Xie <kevin.xie@starfivetech.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linusw@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: Markus Schneider-Pargmann <msp@baylibre.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Michael Dege <michael.dege@renesas.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Niklas Cassel <cassel@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Peter Griffin <peter.griffin@linaro.org>
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sean Paul <sean@poorly.run>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tudor Ambarus <tudor.ambarus@linaro.org>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: Yixun Lan <dlan@kernel.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Vladimir Oltean (24):
  ata: add <linux/pm_runtime.h> where missing
  PCI: Add missing headers transitively included by <linux/phy/phy.h>
  usb: add missing headers transitively included by <linux/phy/phy.h>
  drm: add <linux/pm_runtime.h> where missing
  phy: add <linux/pm_runtime.h> where missing
  phy: spacemit: include missing <linux/phy/phy.h>
  net: lan969x: include missing <linux/of.h>
  PCI: Remove device links to PHY
  ufs: exynos: stop poking into struct phy guts
  drm/rockchip: dw_hdmi: avoid direct dereference of phy->dev.of_node
  drm/msm/dp: remove debugging prints with internal struct phy state
  phy: move provider API out of public <linux/phy/phy.h>
  phy: make phy_get_mode(), phy_(get|set)_bus_width() NULL tolerant
  phy: introduce phy_get_max_link_rate() helper for consumers
  drm/rockchip: dsi: include PHY provider header
  drm: bridge: cdns-mhdp8546: use consumer API for getting PHY bus width
  media: sunxi: a83-mips-csi2: include PHY provider header
  net: renesas: rswitch: include PHY provider header
  pinctrl: tegra-xusb: include PHY provider header
  power: supply: cpcap-charger: include missing <linux/property.h>
  phy: include PHY provider header (1/2)
  phy: include PHY provider header (2/2)
  phy: remove temporary provider compatibility from consumer header
  MAINTAINERS: add regexes for linux-phy

 MAINTAINERS                                   |  11 +
 drivers/ata/ahci.c                            |   1 +
 drivers/ata/ahci_brcm.c                       |   1 +
 drivers/ata/ahci_ceva.c                       |   1 +
 drivers/ata/ahci_qoriq.c                      |   1 +
 drivers/ata/libahci.c                         |   1 +
 .../drm/bridge/analogix/analogix_dp_core.c    |   1 +
 .../drm/bridge/cadence/cdns-mhdp8546-core.c   |   7 +-
 drivers/gpu/drm/bridge/nwl-dsi.c              |   1 +
 drivers/gpu/drm/bridge/samsung-dsim.c         |   1 +
 drivers/gpu/drm/bridge/synopsys/dw-dp.c       |   2 +-
 drivers/gpu/drm/msm/dp/dp_aux.c               |   1 +
 drivers/gpu/drm/msm/dp/dp_ctrl.c              |  18 -
 drivers/gpu/drm/rockchip/cdn-dp-core.c        |   1 +
 .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c   |   1 +
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c   |  25 +-
 .../sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c    |   2 +-
 drivers/net/can/at91_can.c                    |   3 +-
 drivers/net/can/flexcan/flexcan-core.c        |   3 +-
 drivers/net/can/m_can/m_can_platform.c        |   3 +-
 drivers/net/can/rcar/rcar_canfd.c             |   3 +-
 .../microchip/sparx5/lan969x/lan969x_rgmii.c  |   1 +
 drivers/net/ethernet/renesas/rswitch_main.c   |   1 +
 .../controller/cadence/pcie-cadence-plat.c    |   2 -
 drivers/pci/controller/cadence/pcie-cadence.c |  16 +-
 drivers/pci/controller/cadence/pcie-cadence.h |   2 -
 drivers/pci/controller/dwc/pci-dra7xx.c       |  16 -
 drivers/pci/controller/dwc/pci-keystone.c     |  32 +-
 drivers/pci/controller/dwc/pcie-dw-rockchip.c |   1 +
 drivers/pci/controller/dwc/pcie-histb.c       |   1 +
 drivers/pci/controller/dwc/pcie-qcom-ep.c     |   1 +
 drivers/pci/controller/dwc/pcie-spacemit-k1.c |   2 +
 drivers/pci/controller/dwc/pcie-tegra194.c    |   1 +
 drivers/pci/controller/pci-tegra.c            |   1 +
 drivers/pci/controller/pcie-rockchip-host.c   |   1 +
 drivers/pci/controller/plda/pcie-starfive.c   |   1 +
 drivers/phy/allwinner/phy-sun4i-usb.c         |   3 +-
 drivers/phy/allwinner/phy-sun50i-usb3.c       |   3 +-
 drivers/phy/allwinner/phy-sun6i-mipi-dphy.c   |   4 +-
 drivers/phy/allwinner/phy-sun9i-usb.c         |   3 +-
 drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c |   2 +
 .../amlogic/phy-meson-axg-mipi-pcie-analog.c  |   3 +-
 drivers/phy/amlogic/phy-meson-axg-pcie.c      |   2 +
 .../amlogic/phy-meson-g12a-mipi-dphy-analog.c |   3 +-
 drivers/phy/amlogic/phy-meson-g12a-usb2.c     |   2 +
 .../phy/amlogic/phy-meson-g12a-usb3-pcie.c    |   3 +-
 drivers/phy/amlogic/phy-meson-gxl-usb2.c      |   3 +-
 drivers/phy/amlogic/phy-meson8-hdmi-tx.c      |   3 +-
 drivers/phy/amlogic/phy-meson8b-usb2.c        |   3 +-
 drivers/phy/apple/atc.c                       |   3 +-
 drivers/phy/broadcom/phy-bcm-cygnus-pcie.c    |   3 +-
 drivers/phy/broadcom/phy-bcm-kona-usb2.c      |   4 +-
 drivers/phy/broadcom/phy-bcm-ns-usb2.c        |   3 +-
 drivers/phy/broadcom/phy-bcm-ns-usb3.c        |   3 +-
 drivers/phy/broadcom/phy-bcm-ns2-pcie.c       |   3 +-
 drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c     |   3 +-
 drivers/phy/broadcom/phy-bcm-sr-pcie.c        |   3 +-
 drivers/phy/broadcom/phy-bcm-sr-usb.c         |   3 +-
 drivers/phy/broadcom/phy-bcm63xx-usbh.c       |   3 +-
 drivers/phy/broadcom/phy-brcm-sata.c          |   3 +-
 drivers/phy/broadcom/phy-brcm-usb.c           |   2 +-
 drivers/phy/cadence/cdns-dphy-rx.c            |   3 +-
 drivers/phy/cadence/cdns-dphy.c               |   4 +-
 drivers/phy/cadence/phy-cadence-salvo.c       |   3 +-
 drivers/phy/cadence/phy-cadence-sierra.c      |   3 +-
 drivers/phy/cadence/phy-cadence-torrent.c     |   3 +-
 drivers/phy/canaan/phy-k230-usb.c             |   3 +-
 drivers/phy/eswin/phy-eic7700-sata.c          |   3 +-
 .../phy/freescale/phy-fsl-imx8-mipi-dphy.c    |   3 +-
 drivers/phy/freescale/phy-fsl-imx8m-pcie.c    |   4 +-
 drivers/phy/freescale/phy-fsl-imx8mq-usb.c    |   3 +-
 drivers/phy/freescale/phy-fsl-imx8qm-hsio.c   |   6 +-
 .../phy/freescale/phy-fsl-imx8qm-lvds-phy.c   |   3 +-
 drivers/phy/freescale/phy-fsl-lynx-28g.c      |   3 +-
 drivers/phy/hisilicon/phy-hi3660-usb3.c       |   3 +-
 drivers/phy/hisilicon/phy-hi3670-pcie.c       |   3 +-
 drivers/phy/hisilicon/phy-hi3670-usb3.c       |   3 +-
 drivers/phy/hisilicon/phy-hi6220-usb.c        |   3 +-
 drivers/phy/hisilicon/phy-hisi-inno-usb2.c    |   4 +-
 drivers/phy/hisilicon/phy-histb-combphy.c     |   3 +-
 drivers/phy/hisilicon/phy-hix5hd2-sata.c      |   3 +-
 drivers/phy/ingenic/phy-ingenic-usb.c         |   3 +-
 drivers/phy/intel/phy-intel-keembay-emmc.c    |   3 +-
 drivers/phy/intel/phy-intel-keembay-usb.c     |   3 +-
 drivers/phy/intel/phy-intel-lgm-combo.c       |   4 +-
 drivers/phy/intel/phy-intel-lgm-emmc.c        |   3 +-
 drivers/phy/lantiq/phy-lantiq-rcu-usb2.c      |   3 +-
 drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c   |   4 +-
 drivers/phy/marvell/phy-armada375-usb2.c      |   3 +-
 drivers/phy/marvell/phy-armada38x-comphy.c    |   3 +-
 drivers/phy/marvell/phy-berlin-sata.c         |   3 +-
 drivers/phy/marvell/phy-berlin-usb.c          |   3 +-
 drivers/phy/marvell/phy-mmp3-hsic.c           |   3 +-
 drivers/phy/marvell/phy-mmp3-usb.c            |   3 +-
 drivers/phy/marvell/phy-mvebu-a3700-comphy.c  |   3 +-
 drivers/phy/marvell/phy-mvebu-a3700-utmi.c    |   3 +-
 drivers/phy/marvell/phy-mvebu-cp110-comphy.c  |   3 +-
 drivers/phy/marvell/phy-mvebu-cp110-utmi.c    |   3 +-
 drivers/phy/marvell/phy-mvebu-sata.c          |   3 +-
 drivers/phy/marvell/phy-pxa-28nm-hsic.c       |   3 +-
 drivers/phy/marvell/phy-pxa-28nm-usb2.c       |   3 +-
 drivers/phy/marvell/phy-pxa-usb.c             |   3 +-
 drivers/phy/mediatek/phy-mtk-dp.c             |   3 +-
 drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c    |   1 -
 drivers/phy/mediatek/phy-mtk-hdmi.h           |   3 +-
 drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c   |   2 +-
 drivers/phy/mediatek/phy-mtk-mipi-dsi.h       |   3 +-
 drivers/phy/mediatek/phy-mtk-pcie.c           |   2 +-
 drivers/phy/mediatek/phy-mtk-tphy.c           |   2 +-
 drivers/phy/mediatek/phy-mtk-ufs.c            |   2 +-
 drivers/phy/mediatek/phy-mtk-xfi-tphy.c       |   2 +-
 drivers/phy/mediatek/phy-mtk-xsphy.c          |   2 +-
 drivers/phy/microchip/lan966x_serdes.c        |   4 +-
 drivers/phy/microchip/sparx5_serdes.c         |   2 +-
 drivers/phy/motorola/phy-cpcap-usb.c          |   3 +-
 drivers/phy/motorola/phy-mapphone-mdm6600.c   |   5 +-
 drivers/phy/mscc/phy-ocelot-serdes.c          |   3 +-
 drivers/phy/nuvoton/phy-ma35d1-usb2.c         |   3 +-
 drivers/phy/phy-airoha-pcie.c                 |   2 +-
 drivers/phy/phy-can-transceiver.c             |   3 +-
 drivers/phy/phy-core-mipi-dphy.c              |   4 +-
 drivers/phy/phy-core.c                        |  52 ++
 drivers/phy/phy-google-usb.c                  |   4 +-
 drivers/phy/phy-lpc18xx-usb-otg.c             |   3 +-
 drivers/phy/phy-nxp-ptn3222.c                 |   3 +-
 drivers/phy/phy-pistachio-usb.c               |   4 +-
 drivers/phy/phy-provider.h                    | 256 +++++++++
 drivers/phy/phy-snps-eusb2.c                  |   2 +
 drivers/phy/phy-xgene.c                       |   3 +-
 drivers/phy/qualcomm/phy-ath79-usb.c          |   3 +-
 drivers/phy/qualcomm/phy-qcom-apq8064-sata.c  |   3 +-
 drivers/phy/qualcomm/phy-qcom-edp.c           |   3 +-
 .../phy/qualcomm/phy-qcom-eusb2-repeater.c    |   3 +-
 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c   |   3 +-
 drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c  |   3 +-
 drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c   |   3 +-
 drivers/phy/qualcomm/phy-qcom-m31-eusb2.c     |   2 +
 drivers/phy/qualcomm/phy-qcom-m31.c           |   3 +-
 drivers/phy/qualcomm/phy-qcom-pcie2.c         |   3 +-
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c     |   4 +-
 .../phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c  |   3 +-
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c      |   3 +-
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c       |   3 +-
 .../phy/qualcomm/phy-qcom-qmp-usb-legacy.c    |   4 +-
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c       |   4 +-
 drivers/phy/qualcomm/phy-qcom-qmp-usbc.c      |   4 +-
 drivers/phy/qualcomm/phy-qcom-qusb2.c         |   5 +-
 drivers/phy/qualcomm/phy-qcom-sgmii-eth.c     |   3 +-
 drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c |   4 +-
 .../phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c  |   3 +-
 drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c   |   3 +-
 drivers/phy/qualcomm/phy-qcom-usb-hs.c        |   3 +-
 drivers/phy/qualcomm/phy-qcom-usb-hsic.c      |   3 +-
 drivers/phy/qualcomm/phy-qcom-usb-ss.c        |   3 +-
 drivers/phy/ralink/phy-mt7621-pci.c           |   3 +-
 drivers/phy/ralink/phy-ralink-usb.c           |   3 +-
 drivers/phy/realtek/phy-rtk-usb2.c            |   3 +-
 drivers/phy/realtek/phy-rtk-usb3.c            |   3 +-
 drivers/phy/renesas/phy-rcar-gen2.c           |   3 +-
 drivers/phy/renesas/phy-rcar-gen3-pcie.c      |   4 +-
 drivers/phy/renesas/phy-rcar-gen3-usb2.c      |   3 +-
 drivers/phy/renesas/phy-rcar-gen3-usb3.c      |   3 +-
 drivers/phy/renesas/phy-rzg3e-usb3.c          |   3 +-
 drivers/phy/renesas/r8a779f0-ether-serdes.c   |   4 +-
 drivers/phy/rockchip/phy-rockchip-dp.c        |   3 +-
 drivers/phy/rockchip/phy-rockchip-dphy-rx0.c  |   3 +-
 drivers/phy/rockchip/phy-rockchip-emmc.c      |   3 +-
 .../phy/rockchip/phy-rockchip-inno-csidphy.c  |   3 +-
 .../phy/rockchip/phy-rockchip-inno-dsidphy.c  |   4 +-
 drivers/phy/rockchip/phy-rockchip-inno-hdmi.c |   2 +
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c |   3 +-
 .../rockchip/phy-rockchip-naneng-combphy.c    |   3 +-
 drivers/phy/rockchip/phy-rockchip-pcie.c      |   2 +-
 .../phy/rockchip/phy-rockchip-samsung-dcphy.c |   3 +-
 .../phy/rockchip/phy-rockchip-samsung-hdptx.c |   2 +
 .../phy/rockchip/phy-rockchip-snps-pcie3.c    |   3 +-
 drivers/phy/rockchip/phy-rockchip-typec.c     |   5 +-
 drivers/phy/rockchip/phy-rockchip-usb.c       |   3 +-
 drivers/phy/rockchip/phy-rockchip-usbdp.c     |   2 +
 drivers/phy/samsung/phy-exynos-dp-video.c     |   3 +-
 drivers/phy/samsung/phy-exynos-mipi-video.c   |   3 +-
 drivers/phy/samsung/phy-exynos-pcie.c         |   3 +-
 drivers/phy/samsung/phy-exynos4210-usb2.c     |   3 +-
 drivers/phy/samsung/phy-exynos4x12-usb2.c     |   3 +-
 drivers/phy/samsung/phy-exynos5-usbdrd.c      |   2 +
 drivers/phy/samsung/phy-exynos5250-sata.c     |   3 +-
 drivers/phy/samsung/phy-exynos5250-usb2.c     |   3 +-
 drivers/phy/samsung/phy-s5pv210-usb2.c        |   3 +-
 drivers/phy/samsung/phy-samsung-ufs.c         |   2 +-
 drivers/phy/samsung/phy-samsung-ufs.h         |   3 +-
 drivers/phy/samsung/phy-samsung-usb2.c        |   2 +
 drivers/phy/samsung/phy-samsung-usb2.h        |   3 +-
 drivers/phy/socionext/phy-uniphier-ahci.c     |   3 +-
 drivers/phy/socionext/phy-uniphier-pcie.c     |   3 +-
 drivers/phy/socionext/phy-uniphier-usb2.c     |   3 +-
 drivers/phy/socionext/phy-uniphier-usb3hs.c   |   3 +-
 drivers/phy/socionext/phy-uniphier-usb3ss.c   |   3 +-
 drivers/phy/sophgo/phy-cv1800-usb2.c          |   3 +-
 drivers/phy/spacemit/phy-k1-pcie.c            |   4 +-
 drivers/phy/spacemit/phy-k1-usb2.c            |   2 +
 drivers/phy/st/phy-miphy28lp.c                |   4 +-
 drivers/phy/st/phy-spear1310-miphy.c          |   3 +-
 drivers/phy/st/phy-spear1340-miphy.c          |   3 +-
 drivers/phy/st/phy-stih407-usb.c              |   3 +-
 drivers/phy/st/phy-stm32-combophy.c           |   3 +-
 drivers/phy/st/phy-stm32-usbphyc.c            |   2 +
 drivers/phy/starfive/phy-jh7110-dphy-rx.c     |   3 +-
 drivers/phy/starfive/phy-jh7110-dphy-tx.c     |   3 +-
 drivers/phy/starfive/phy-jh7110-pcie.c        |   3 +-
 drivers/phy/starfive/phy-jh7110-usb.c         |   3 +-
 drivers/phy/sunplus/phy-sunplus-usb2.c        |   3 +-
 drivers/phy/tegra/phy-tegra194-p2u.c          |   3 +-
 drivers/phy/tegra/xusb-tegra124.c             |   2 +-
 drivers/phy/tegra/xusb-tegra186.c             |   2 +-
 drivers/phy/tegra/xusb-tegra210.c             |   2 +-
 drivers/phy/tegra/xusb.c                      |   2 +-
 drivers/phy/ti/phy-am654-serdes.c             |   3 +-
 drivers/phy/ti/phy-da8xx-usb.c                |   3 +-
 drivers/phy/ti/phy-dm816x-usb.c               |   3 +-
 drivers/phy/ti/phy-gmii-sel.c                 |   3 +-
 drivers/phy/ti/phy-omap-usb2.c                |   3 +-
 drivers/phy/ti/phy-ti-pipe3.c                 |   3 +-
 drivers/phy/ti/phy-tusb1210.c                 |   1 +
 drivers/phy/ti/phy-twl4030-usb.c              |   3 +-
 drivers/phy/xilinx/phy-zynqmp.c               |   4 +-
 drivers/pinctrl/tegra/pinctrl-tegra-xusb.c    |   2 +-
 drivers/power/supply/cpcap-charger.c          |   1 +
 drivers/ufs/host/ufs-exynos.c                 |  24 +-
 drivers/ufs/host/ufs-exynos.h                 |   1 +
 drivers/usb/chipidea/ci_hdrc_imx.c            |   1 +
 drivers/usb/core/hcd.c                        |   1 +
 drivers/usb/dwc3/dwc3-generic-plat.c          |   1 +
 drivers/usb/dwc3/gadget.c                     |   1 +
 include/linux/phy/phy-props.h                 |  75 +++
 include/linux/phy/phy-sun4i-usb.h             |   2 +-
 include/linux/phy/phy.h                       | 497 ++++--------------
 include/linux/phy/ulpi_phy.h                  |   2 +-
 237 files changed, 941 insertions(+), 703 deletions(-)
 create mode 100644 drivers/phy/phy-provider.h
 create mode 100644 include/linux/phy/phy-props.h

-- 
2.43.0

[PATCH v2 phy-next 01/24] ata: add <linux/pm_runtime.h> where missing

[vladimir.oltean]

It appears that libahci.c, ahci.c as well as the ahci_brcm, ahci_ceva
and ahci_qoriq drivers are using runtime PM operations without including
<linux/pm_runtime.h>. This header is somehow being indirectly provided
by <linux/phy/phy.h>, which would like to drop it (none of the functions
it exports need it).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
---
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Niklas Cassel <cassel@kernel.org>

v1->v2: collect tag
---
 drivers/ata/ahci.c       | 1 +
 drivers/ata/ahci_brcm.c  | 1 +
 drivers/ata/ahci_ceva.c  | 1 +
 drivers/ata/ahci_qoriq.c | 1 +
 drivers/ata/libahci.c    | 1 +
 5 files changed, 5 insertions(+)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 931d0081169b..aa3c4949c4ab 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -26,6 +26,7 @@
 #include <linux/device.h>
 #include <linux/dmi.h>
 #include <linux/gfp.h>
+#include <linux/pm_runtime.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_cmnd.h>
 #include <linux/libata.h>
diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 29be74fedcf0..48460e515722 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/reset.h>
 #include <linux/string.h>
 
diff --git a/drivers/ata/ahci_ceva.c b/drivers/ata/ahci_ceva.c
index 2d6a08c23d6a..3938bf378341 100644
--- a/drivers/ata/ahci_ceva.c
+++ b/drivers/ata/ahci_ceva.c
@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/reset.h>
 #include "ahci.h"
 
diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c
index 0dec1a17e5b1..409152bfefb6 100644
--- a/drivers/ata/ahci_qoriq.c
+++ b/drivers/ata/ahci_qoriq.c
@@ -14,6 +14,7 @@
 #include <linux/device.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/libata.h>
 #include "ahci.h"
 
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index c79abdfcd7a9..e0de4703a4f2 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -30,6 +30,7 @@
 #include <scsi/scsi_cmnd.h>
 #include <linux/libata.h>
 #include <linux/pci.h>
+#include <linux/pm_runtime.h>
 #include "ahci.h"
 #include "libata.h"
 
-- 
2.43.0

[PATCH v2 phy-next 02/24] PCI: Add missing headers transitively included by <linux/phy/phy.h>

[vladimir.oltean]

The tegra as well as a few dwc PCI controller drivers uses PM runtime
operations without including the required <linux/pm_runtime.h> header.

Similarly, pcie-rockchip-host, pcie-starfive as well as a few dwc PCI
controllers use the regulator consumer API without including
<linux/regulator/consumer.h>.

It seems these function prototypes were indirectly provided by
<linux/phy/phy.h>, mostly by mistake (none of the functions it exports
need it).

Before the PHY header can drop the unnecessary includes, make sure the
PCI controller drivers include what they use.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
---
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Yixun Lan <dlan@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Kevin Xie <kevin.xie@starfivetech.com>

v1->v2: collect tag, adjust commit title
---
 drivers/pci/controller/dwc/pci-keystone.c     | 1 +
 drivers/pci/controller/dwc/pcie-dw-rockchip.c | 1 +
 drivers/pci/controller/dwc/pcie-histb.c       | 1 +
 drivers/pci/controller/dwc/pcie-qcom-ep.c     | 1 +
 drivers/pci/controller/dwc/pcie-spacemit-k1.c | 2 ++
 drivers/pci/controller/dwc/pcie-tegra194.c    | 1 +
 drivers/pci/controller/pci-tegra.c            | 1 +
 drivers/pci/controller/pcie-rockchip-host.c   | 1 +
 drivers/pci/controller/plda/pcie-starfive.c   | 1 +
 9 files changed, 10 insertions(+)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 20fa4dadb82a..642e4c45eefc 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -24,6 +24,7 @@
 #include <linux/of_pci.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/resource.h>
 #include <linux/signal.h>
diff --git a/drivers/pci/controller/dwc/pcie-dw-rockchip.c b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
index 5b17da63151d..e0079ec108ab 100644
--- a/drivers/pci/controller/dwc/pcie-dw-rockchip.c
+++ b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
@@ -21,6 +21,7 @@
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 
 #include "../../pci.h"
diff --git a/drivers/pci/controller/dwc/pcie-histb.c b/drivers/pci/controller/dwc/pcie-histb.c
index a52071589377..432a54c5bfce 100644
--- a/drivers/pci/controller/dwc/pcie-histb.c
+++ b/drivers/pci/controller/dwc/pcie-histb.c
@@ -18,6 +18,7 @@
 #include <linux/pci.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <linux/resource.h>
 #include <linux/reset.h>
 
diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
index 18460f01b2c6..e417122da51d 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
@@ -19,6 +19,7 @@
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/module.h>
diff --git a/drivers/pci/controller/dwc/pcie-spacemit-k1.c b/drivers/pci/controller/dwc/pcie-spacemit-k1.c
index be20a520255b..dbec159fd458 100644
--- a/drivers/pci/controller/dwc/pcie-spacemit-k1.c
+++ b/drivers/pci/controller/dwc/pcie-spacemit-k1.c
@@ -15,7 +15,9 @@
 #include <linux/mod_devicetable.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/types.h>
 
diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 06571d806ab3..3378a89580ab 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -27,6 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/random.h>
+#include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/resource.h>
 #include <linux/types.h>
diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index 512309763d1f..a2c1662b6e81 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -36,6 +36,7 @@
 #include <linux/phy/phy.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/reset.h>
 #include <linux/sizes.h>
 #include <linux/slab.h>
diff --git a/drivers/pci/controller/pcie-rockchip-host.c b/drivers/pci/controller/pcie-rockchip-host.c
index ee1822ca01db..46adb4582fcc 100644
--- a/drivers/pci/controller/pcie-rockchip-host.c
+++ b/drivers/pci/controller/pcie-rockchip-host.c
@@ -24,6 +24,7 @@
 #include <linux/of_pci.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 
 #include "../pci.h"
 #include "pcie-rockchip.h"
diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c
index 298036c3e7f9..22344cca167b 100644
--- a/drivers/pci/controller/plda/pcie-starfive.c
+++ b/drivers/pci/controller/plda/pcie-starfive.c
@@ -21,6 +21,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include "../../pci.h"
 
-- 
2.43.0

[PATCH v2 phy-next 03/24] usb: add missing headers transitively included by <linux/phy/phy.h>

[vladimir.oltean]

The chipidea ci_hdrc_imx driver uses regulator consumer API like
regulator_enable() but does not include <linux/regulator/consumer.h>.

The core USB HCD driver calls invalidate_kernel_vmap_range() and
flush_kernel_vmap_range(), but does not include <linux/highmem.h>.

The DWC3 gadget driver calls:
- device_property_present()
- device_property_count_u8()
- device_property_read_u8_array()
but does not include <linux/property.h>

The dwc3-generic-plat driver uses of_device_get_match_data() but does
not include <linux/of.h>.

In all these cases, the necessary includes were still provided somehow,
directly or indirectly, through <linux/phy/phy.h>. The latter header
wants to drop those includes, so fill in the required headers to avoid
any breakage.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> # dwc3
---
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Frank Li <Frank.Li@nxp.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

v1->v2: collect tag
---
 drivers/usb/chipidea/ci_hdrc_imx.c   | 1 +
 drivers/usb/core/hcd.c               | 1 +
 drivers/usb/dwc3/dwc3-generic-plat.c | 1 +
 drivers/usb/dwc3/gadget.c            | 1 +
 4 files changed, 4 insertions(+)

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 56d2ba824a0b..0a21d7cc5f5a 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -17,6 +17,7 @@
 #include <linux/clk.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pm_qos.h>
+#include <linux/regulator/consumer.h>
 
 #include "ci.h"
 #include "ci_hdrc_imx.h"
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index dee842ea6931..7a3261f72463 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/bcd.h>
+#include <linux/highmem.h>
 #include <linux/module.h>
 #include <linux/version.h>
 #include <linux/kernel.h>
diff --git a/drivers/usb/dwc3/dwc3-generic-plat.c b/drivers/usb/dwc3/dwc3-generic-plat.c
index e846844e0023..2ee1bb9d7199 100644
--- a/drivers/usb/dwc3/dwc3-generic-plat.c
+++ b/drivers/usb/dwc3/dwc3-generic-plat.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 #include <linux/regmap.h>
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 0a688904ce8c..d06171af6870 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
-- 
2.43.0

[PATCH v2 phy-next 04/24] drm: add <linux/pm_runtime.h> where missing

[vladimir.oltean]

Multiple DRM bridge drivers use runtime PM operations without
including the proper header, instead relying on transitive inclusion
by <linux/phy/phy.h>.

The PHY subsystem wants to get rid of headers it provides for no reason,
so modify these drivers to include what they need directly.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Cc: Dmitry Baryshkov <lumag@kernel.org>

v1->v2: none
---
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c  | 1 +
 drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c | 1 +
 drivers/gpu/drm/bridge/nwl-dsi.c                    | 1 +
 drivers/gpu/drm/bridge/samsung-dsim.c               | 1 +
 drivers/gpu/drm/msm/dp/dp_aux.c                     | 1 +
 drivers/gpu/drm/rockchip/cdn-dp-core.c              | 1 +
 6 files changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index efe534977d12..9dfe790e6c14 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -18,6 +18,7 @@
 #include <linux/of.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 
 #include <drm/bridge/analogix_dp.h>
 #include <drm/drm_atomic.h>
diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
index 9392c226ff5b..a8b6ae58cb0a 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
@@ -32,6 +32,7 @@
 #include <linux/phy/phy.h>
 #include <linux/phy/phy-dp.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/slab.h>
 #include <linux/wait.h>
 
diff --git a/drivers/gpu/drm/bridge/nwl-dsi.c b/drivers/gpu/drm/bridge/nwl-dsi.c
index 2f7429b24fc2..9ac8796ae91e 100644
--- a/drivers/gpu/drm/bridge/nwl-dsi.c
+++ b/drivers/gpu/drm/bridge/nwl-dsi.c
@@ -18,6 +18,7 @@
 #include <linux/of.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/sys_soc.h>
diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
index 930aaa659c97..54bc148fc29d 100644
--- a/drivers/gpu/drm/bridge/samsung-dsim.c
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -20,6 +20,7 @@
 #include <linux/of.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/units.h>
 
 #include <video/mipi_display.h>
diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
index 3825a2fb48e2..5ee22f88bd28 100644
--- a/drivers/gpu/drm/msm/dp/dp_aux.c
+++ b/drivers/gpu/drm/msm/dp/dp_aux.c
@@ -6,6 +6,7 @@
 #include <linux/delay.h>
 #include <linux/iopoll.h>
 #include <linux/phy/phy.h>
+#include <linux/pm_runtime.h>
 #include <drm/drm_print.h>
 
 #include "dp_reg.h"
diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index 177e30445ee8..68556daa54ae 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -10,6 +10,7 @@
 #include <linux/firmware.h>
 #include <linux/mfd/syscon.h>
 #include <linux/phy/phy.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
-- 
2.43.0

[PATCH v2 phy-next 05/24] phy: add <linux/pm_runtime.h> where missing

[vladimir.oltean]

It appears that the phy-mapphone-mdm6600, phy-qcom-snps-femto-v2,
phy-rcar-gen3-pcie, r8a779f0-ether-serdes and phy-rockchip-typec drivers
call runtime PM operations without including the proper header.

This was provided by <linux/phy/phy.h> but no function exported by this
header directly needs it. So we need to drop it from there, and fix up
drivers that used to depend on that.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Reviewed-by: André Draszik <andre.draszik@linaro.org> # google
---
Cc: Peter Griffin <peter.griffin@linaro.org>
Cc: "André Draszik" <andre.draszik@linaro.org>
Cc: Tudor Ambarus <tudor.ambarus@linaro.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>

v1->v2: collect tags
---
 drivers/phy/motorola/phy-mapphone-mdm6600.c    | 1 +
 drivers/phy/phy-google-usb.c                   | 1 +
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c      | 1 +
 drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c | 1 +
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c        | 1 +
 drivers/phy/qualcomm/phy-qcom-qmp-usbc.c       | 1 +
 drivers/phy/qualcomm/phy-qcom-qusb2.c          | 1 +
 drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c  | 1 +
 drivers/phy/renesas/phy-rcar-gen3-pcie.c       | 1 +
 drivers/phy/renesas/r8a779f0-ether-serdes.c    | 1 +
 drivers/phy/rockchip/phy-rockchip-typec.c      | 1 +
 drivers/phy/ti/phy-tusb1210.c                  | 1 +
 12 files changed, 12 insertions(+)

diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c
index fd0e0cd1c1cf..ce1dad8c438d 100644
--- a/drivers/phy/motorola/phy-mapphone-mdm6600.c
+++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c
@@ -17,6 +17,7 @@
 #include <linux/of_platform.h>
 #include <linux/phy/phy.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/pm_runtime.h>
 
 #define PHY_MDM6600_PHY_DELAY_MS	4000	/* PHY enable 2.2s to 3.5s */
 #define PHY_MDM6600_ENABLED_DELAY_MS	8000	/* 8s more total for MDM6600 */
diff --git a/drivers/phy/phy-google-usb.c b/drivers/phy/phy-google-usb.c
index ab20bc20f19e..48cfa2e28347 100644
--- a/drivers/phy/phy-google-usb.c
+++ b/drivers/phy/phy-google-usb.c
@@ -16,6 +16,7 @@
 #include <linux/of.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/usb/typec_mux.h>
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 93f1aa10d400..b9ea7d058e93 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -16,6 +16,7 @@
 #include <linux/of_graph.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
index 8bf951b0490c..2bd5862c5ba8 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
@@ -16,6 +16,7 @@
 #include <linux/of_address.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index b0ecd5ba2464..d88b8a415e85 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -15,6 +15,7 @@
 #include <linux/of_address.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
index c342479a3798..f62e1f6ecc07 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
@@ -16,6 +16,7 @@
 #include <linux/of_address.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index eb93015be841..191040f6d60f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -14,6 +14,7 @@
 #include <linux/of.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
index eb0b0f61d98e..8915fa250e81 100644
--- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
+++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
@@ -12,6 +12,7 @@
 #include <linux/of.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
diff --git a/drivers/phy/renesas/phy-rcar-gen3-pcie.c b/drivers/phy/renesas/phy-rcar-gen3-pcie.c
index c0e5a4ac82de..3e2cf59ad480 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-pcie.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-pcie.c
@@ -11,6 +11,7 @@
 #include <linux/of.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/spinlock.h>
 
 #define PHY_CTRL		0x4000		/* R8A77980 only */
diff --git a/drivers/phy/renesas/r8a779f0-ether-serdes.c b/drivers/phy/renesas/r8a779f0-ether-serdes.c
index 8a6b6f366fe3..c34427ac4fdb 100644
--- a/drivers/phy/renesas/r8a779f0-ether-serdes.c
+++ b/drivers/phy/renesas/r8a779f0-ether-serdes.c
@@ -12,6 +12,7 @@
 #include <linux/phy.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/reset.h>
 
 #define R8A779F0_ETH_SERDES_NUM			3
diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
index d9701b6106d5..0a318ccf1bbf 100644
--- a/drivers/phy/rockchip/phy-rockchip-typec.c
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
@@ -49,6 +49,7 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
diff --git a/drivers/phy/ti/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c
index c3ae9d7948d7..b7080403e649 100644
--- a/drivers/phy/ti/phy-tusb1210.c
+++ b/drivers/phy/ti/phy-tusb1210.c
@@ -13,6 +13,7 @@
 #include <linux/ulpi/regs.h>
 #include <linux/gpio/consumer.h>
 #include <linux/phy/ulpi_phy.h>
+#include <linux/pm_runtime.h>
 #include <linux/power_supply.h>
 #include <linux/property.h>
 #include <linux/workqueue.h>
-- 
2.43.0

[PATCH v2 phy-next 06/24] phy: spacemit: include missing <linux/phy/phy.h>

[vladimir.oltean]

This driver relies on a transitive inclusion of the PHY API header
through the USB headers.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Yixun Lan <dlan@kernel.org>

v1->v2: none
---
 drivers/phy/spacemit/phy-k1-usb2.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/phy/spacemit/phy-k1-usb2.c b/drivers/phy/spacemit/phy-k1-usb2.c
index 342061380012..14a02f554810 100644
--- a/drivers/phy/spacemit/phy-k1-usb2.c
+++ b/drivers/phy/spacemit/phy-k1-usb2.c
@@ -9,6 +9,7 @@
 #include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/iopoll.h>
+#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/usb/of.h>
-- 
2.43.0

[PATCH v2 phy-next 07/24] net: lan969x: include missing <linux/of.h>

[vladimir.oltean]

This file is calling of_property_read_u32() without including the proper
header for it. It is provided by <linux/phy/phy.h>, which wants to get
rid of it.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
---
Cc: Daniel Machon <daniel.machon@microchip.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>

v1->v2: collect tag
---
 drivers/net/ethernet/microchip/sparx5/lan969x/lan969x_rgmii.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/microchip/sparx5/lan969x/lan969x_rgmii.c b/drivers/net/ethernet/microchip/sparx5/lan969x/lan969x_rgmii.c
index 4e422ca50828..249114b40c42 100644
--- a/drivers/net/ethernet/microchip/sparx5/lan969x/lan969x_rgmii.c
+++ b/drivers/net/ethernet/microchip/sparx5/lan969x/lan969x_rgmii.c
@@ -4,6 +4,7 @@
  * Copyright (c) 2024 Microchip Technology Inc. and its subsidiaries.
  */
 
+#include <linux/of.h>
 #include "lan969x.h"
 
 /* Tx clock selectors */
-- 
2.43.0

[PATCH v2 phy-next 08/24] PCI: Remove device links to PHY

[vladimir.oltean]

This is practically a full revert of commit
7a4db656a635 ("PCI: dra7xx: Create functional dependency between PCIe and PHY")
and a partial revert of the device link pieces from commits
dfb80534692d ("PCI: cadence: Add generic PHY support to host and EP drivers")
49229238ab47 ("PCI: keystone: Cleanup PHY handling")

The trouble with these commits is that they dereference fields inside
struct phy from a consumer driver, which will become no longer possible.

Since commit 987351e1ea77 ("phy: core: Add consumer device link
support") from 2019, the PHY core also adds a device link to order PHY
provider and consumer suspend/resume operations. All reverted commits
are from 2017-2018, and what they do should actually be redundant now.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
---
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Siddharth Vadapalli <s-vadapalli@ti.com>

v1->v2:
- fully remove struct device link **link from struct cdns_pcie and from
  cdns_plat_pcie_probe() error path
- collect tag
- adjust commit title
---
 .../controller/cadence/pcie-cadence-plat.c    |  2 --
 drivers/pci/controller/cadence/pcie-cadence.c | 16 +---------
 drivers/pci/controller/cadence/pcie-cadence.h |  2 --
 drivers/pci/controller/dwc/pci-dra7xx.c       | 16 ----------
 drivers/pci/controller/dwc/pci-keystone.c     | 31 +++----------------
 5 files changed, 5 insertions(+), 62 deletions(-)

diff --git a/drivers/pci/controller/cadence/pcie-cadence-plat.c b/drivers/pci/controller/cadence/pcie-cadence-plat.c
index b067a3296dd3..54531f86bf45 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-plat.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-plat.c
@@ -123,8 +123,6 @@ static int cdns_plat_pcie_probe(struct platform_device *pdev)
 	pm_runtime_disable(dev);
 	cdns_pcie_disable_phy(cdns_plat_pcie->pcie);
 	phy_count = cdns_plat_pcie->pcie->phy_count;
-	while (phy_count--)
-		device_link_del(cdns_plat_pcie->pcie->link[phy_count]);
 
 	return 0;
 }
diff --git a/drivers/pci/controller/cadence/pcie-cadence.c b/drivers/pci/controller/cadence/pcie-cadence.c
index a1eada56edba..0ac980249941 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.c
+++ b/drivers/pci/controller/cadence/pcie-cadence.c
@@ -222,7 +222,6 @@ int cdns_pcie_init_phy(struct device *dev, struct cdns_pcie *pcie)
 	struct device_node *np = dev->of_node;
 	int phy_count;
 	struct phy **phy;
-	struct device_link **link;
 	int i;
 	int ret;
 	const char *name;
@@ -238,10 +237,6 @@ int cdns_pcie_init_phy(struct device *dev, struct cdns_pcie *pcie)
 	if (!phy)
 		return -ENOMEM;
 
-	link = devm_kcalloc(dev, phy_count, sizeof(*link), GFP_KERNEL);
-	if (!link)
-		return -ENOMEM;
-
 	for (i = 0; i < phy_count; i++) {
 		of_property_read_string_index(np, "phy-names", i, &name);
 		phy[i] = devm_phy_get(dev, name);
@@ -249,17 +244,10 @@ int cdns_pcie_init_phy(struct device *dev, struct cdns_pcie *pcie)
 			ret = PTR_ERR(phy[i]);
 			goto err_phy;
 		}
-		link[i] = device_link_add(dev, &phy[i]->dev, DL_FLAG_STATELESS);
-		if (!link[i]) {
-			devm_phy_put(dev, phy[i]);
-			ret = -EINVAL;
-			goto err_phy;
-		}
 	}
 
 	pcie->phy_count = phy_count;
 	pcie->phy = phy;
-	pcie->link = link;
 
 	ret =  cdns_pcie_enable_phy(pcie);
 	if (ret)
@@ -268,10 +256,8 @@ int cdns_pcie_init_phy(struct device *dev, struct cdns_pcie *pcie)
 	return 0;
 
 err_phy:
-	while (--i >= 0) {
-		device_link_del(link[i]);
+	while (--i >= 0)
 		devm_phy_put(dev, phy[i]);
-	}
 
 	return ret;
 }
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index 443033c607d7..35b0b33bc6fb 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -82,7 +82,6 @@ struct cdns_plat_pcie_of_data {
  * @is_rc: tell whether the PCIe controller mode is Root Complex or Endpoint.
  * @phy_count: number of supported PHY devices
  * @phy: list of pointers to specific PHY control blocks
- * @link: list of pointers to corresponding device link representations
  * @ops: Platform-specific ops to control various inputs from Cadence PCIe
  *       wrapper
  * @cdns_pcie_reg_offsets: Register bank offsets for different SoC
@@ -95,7 +94,6 @@ struct cdns_pcie {
 	bool			             is_rc;
 	int			             phy_count;
 	struct phy		             **phy;
-	struct device_link	             **link;
 	const  struct cdns_pcie_ops          *ops;
 	const  struct cdns_plat_pcie_of_data *cdns_pcie_reg_offsets;
 };
diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c
index d5d26229063f..b91ab37845c9 100644
--- a/drivers/pci/controller/dwc/pci-dra7xx.c
+++ b/drivers/pci/controller/dwc/pci-dra7xx.c
@@ -9,7 +9,6 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <linux/device.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -683,7 +682,6 @@ static int dra7xx_pcie_probe(struct platform_device *pdev)
 	int i;
 	int phy_count;
 	struct phy **phy;
-	struct device_link **link;
 	void __iomem *base;
 	struct dw_pcie *pci;
 	struct dra7xx_pcie *dra7xx;
@@ -731,10 +729,6 @@ static int dra7xx_pcie_probe(struct platform_device *pdev)
 	if (!phy)
 		return -ENOMEM;
 
-	link = devm_kcalloc(dev, phy_count, sizeof(*link), GFP_KERNEL);
-	if (!link)
-		return -ENOMEM;
-
 	dra7xx->clk = devm_clk_get_optional(dev, NULL);
 	if (IS_ERR(dra7xx->clk))
 		return dev_err_probe(dev, PTR_ERR(dra7xx->clk),
@@ -749,12 +743,6 @@ static int dra7xx_pcie_probe(struct platform_device *pdev)
 		phy[i] = devm_phy_get(dev, name);
 		if (IS_ERR(phy[i]))
 			return PTR_ERR(phy[i]);
-
-		link[i] = device_link_add(dev, &phy[i]->dev, DL_FLAG_STATELESS);
-		if (!link[i]) {
-			ret = -EINVAL;
-			goto err_link;
-		}
 	}
 
 	dra7xx->base = base;
@@ -856,10 +844,6 @@ static int dra7xx_pcie_probe(struct platform_device *pdev)
 	pm_runtime_disable(dev);
 	dra7xx_pcie_disable_phy(dra7xx);
 
-err_link:
-	while (--i >= 0)
-		device_link_del(link[i]);
-
 	return ret;
 }
 
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 642e4c45eefc..07698c645e02 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -130,7 +130,6 @@ struct keystone_pcie {
 	int			num_lanes;
 	u32			num_viewport;
 	struct phy		**phy;
-	struct device_link	**link;
 	struct			device_node *msi_intc_np;
 	struct irq_domain	*intx_irq_domain;
 	struct device_node	*np;
@@ -1118,7 +1117,6 @@ static int ks_pcie_probe(struct platform_device *pdev)
 	enum dw_pcie_device_mode mode;
 	struct dw_pcie *pci;
 	struct keystone_pcie *ks_pcie;
-	struct device_link **link;
 	struct gpio_desc *gpiod;
 	struct resource *res;
 	void __iomem *base;
@@ -1189,31 +1187,17 @@ static int ks_pcie_probe(struct platform_device *pdev)
 	if (!phy)
 		return -ENOMEM;
 
-	link = devm_kcalloc(dev, num_lanes, sizeof(*link), GFP_KERNEL);
-	if (!link)
-		return -ENOMEM;
-
 	for (i = 0; i < num_lanes; i++) {
 		snprintf(name, sizeof(name), "pcie-phy%d", i);
 		phy[i] = devm_phy_optional_get(dev, name);
 		if (IS_ERR(phy[i])) {
 			ret = PTR_ERR(phy[i]);
-			goto err_link;
-		}
-
-		if (!phy[i])
-			continue;
-
-		link[i] = device_link_add(dev, &phy[i]->dev, DL_FLAG_STATELESS);
-		if (!link[i]) {
-			ret = -EINVAL;
-			goto err_link;
+			goto err;
 		}
 	}
 
 	ks_pcie->np = np;
 	ks_pcie->pci = pci;
-	ks_pcie->link = link;
 	ks_pcie->num_lanes = num_lanes;
 	ks_pcie->phy = phy;
 
@@ -1223,7 +1207,7 @@ static int ks_pcie_probe(struct platform_device *pdev)
 		ret = PTR_ERR(gpiod);
 		if (ret != -EPROBE_DEFER)
 			dev_err(dev, "Failed to get reset GPIO\n");
-		goto err_link;
+		goto err;
 	}
 
 	/* Obtain references to the PHYs */
@@ -1238,7 +1222,7 @@ static int ks_pcie_probe(struct platform_device *pdev)
 
 	if (ret) {
 		dev_err(dev, "failed to enable phy\n");
-		goto err_link;
+		goto err;
 	}
 
 	platform_set_drvdata(pdev, ks_pcie);
@@ -1325,25 +1309,18 @@ static int ks_pcie_probe(struct platform_device *pdev)
 	pm_runtime_disable(dev);
 	ks_pcie_disable_phy(ks_pcie);
 
-err_link:
-	while (--i >= 0 && link[i])
-		device_link_del(link[i]);
-
+err:
 	return ret;
 }
 
 static void ks_pcie_remove(struct platform_device *pdev)
 {
 	struct keystone_pcie *ks_pcie = platform_get_drvdata(pdev);
-	struct device_link **link = ks_pcie->link;
-	int num_lanes = ks_pcie->num_lanes;
 	struct device *dev = &pdev->dev;
 
 	pm_runtime_put(dev);
 	pm_runtime_disable(dev);
 	ks_pcie_disable_phy(ks_pcie);
-	while (num_lanes--)
-		device_link_del(link[num_lanes]);
 }
 
 static struct platform_driver ks_pcie_driver = {
-- 
2.43.0

[PATCH v2 phy-next 09/24] ufs: exynos: stop poking into struct phy guts

[vladimir.oltean]

The Exynos host controller driver is clearly a PHY consumer (gets the
ufs->phy using devm_phy_get()), but pokes into the guts of struct phy
to get the generic_phy->power_count.

The UFS core (specifically ufshcd_link_startup()) may call the variant
operation exynos_ufs_pre_link() -> exynos_ufs_phy_init() multiple times
if the link startup fails and needs to be retried.

However ufs-exynos shouldn't be doing what it's doing, i.e. looking at
the generic_phy->power_count, because in the general sense of the API, a
single Generic PHY may have multiple consumers. If ufs-exynos looks at
generic_phy->power_count, there's no guarantee that *ufs-exynos* is the
one who previously bumped that power count. So it may be powering down
the PHY on behalf of another consumer.

The correct way in which this should be handled is ufs-exynos should
*remember* whether it has initialized and powered up the PHY before, and
power it down during link retries. Not rely on the power_count (which,
btw, on the writer side is modified under &phy->mutex, but on the reader
side is accessed unlocked). This is a discouraged pattern even if here
it doesn't cause functional problems.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Peter Griffin <peter.griffin@linaro.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>

v1->v2: add better ufs->phy_powered_on handling in exynos_ufs_exit(),
exynos_ufs_suspend() and exynos_ufs_resume() which ensures we won't
enter a phy->power_count underrun condition
---
 drivers/ufs/host/ufs-exynos.c | 24 ++++++++++++++++++++----
 drivers/ufs/host/ufs-exynos.h |  1 +
 2 files changed, 21 insertions(+), 4 deletions(-)

diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index 76fee3a79c77..274e53833571 100644
--- a/drivers/ufs/host/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -963,9 +963,10 @@ static int exynos_ufs_phy_init(struct exynos_ufs *ufs)
 
 	phy_set_bus_width(generic_phy, ufs->avail_ln_rx);
 
-	if (generic_phy->power_count) {
+	if (ufs->phy_powered_on) {
 		phy_power_off(generic_phy);
 		phy_exit(generic_phy);
+		ufs->phy_powered_on = false;
 	}
 
 	ret = phy_init(generic_phy);
@@ -979,6 +980,8 @@ static int exynos_ufs_phy_init(struct exynos_ufs *ufs)
 	if (ret)
 		goto out_exit_phy;
 
+	ufs->phy_powered_on = true;
+
 	return 0;
 
 out_exit_phy:
@@ -1527,6 +1530,9 @@ static void exynos_ufs_exit(struct ufs_hba *hba)
 {
 	struct exynos_ufs *ufs = ufshcd_get_variant(hba);
 
+	if (!ufs->phy_powered_on)
+		return;
+
 	phy_power_off(ufs->phy);
 	phy_exit(ufs->phy);
 }
@@ -1728,8 +1734,10 @@ static int exynos_ufs_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
 	if (ufs->drv_data->suspend)
 		ufs->drv_data->suspend(ufs);
 
-	if (!ufshcd_is_link_active(hba))
+	if (!ufshcd_is_link_active(hba) && ufs->phy_powered_on) {
 		phy_power_off(ufs->phy);
+		ufs->phy_powered_on = false;
+	}
 
 	return 0;
 }
@@ -1737,9 +1745,17 @@ static int exynos_ufs_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
 static int exynos_ufs_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 {
 	struct exynos_ufs *ufs = ufshcd_get_variant(hba);
+	int err;
 
-	if (!ufshcd_is_link_active(hba))
-		phy_power_on(ufs->phy);
+	if (!ufshcd_is_link_active(hba) && !ufs->phy_powered_on) {
+		err = phy_power_on(ufs->phy);
+		if (err) {
+			dev_err(hba->dev, "Failed to power on PHY: %pe\n",
+				ERR_PTR(err));
+		} else {
+			ufs->phy_powered_on = true;
+		}
+	}
 
 	exynos_ufs_config_smu(ufs);
 	exynos_ufs_fmp_resume(hba);
diff --git a/drivers/ufs/host/ufs-exynos.h b/drivers/ufs/host/ufs-exynos.h
index abe7e472759e..683b9150e2ba 100644
--- a/drivers/ufs/host/ufs-exynos.h
+++ b/drivers/ufs/host/ufs-exynos.h
@@ -227,6 +227,7 @@ struct exynos_ufs {
 	int avail_ln_rx;
 	int avail_ln_tx;
 	int rx_sel_idx;
+	bool phy_powered_on;
 	struct ufs_pa_layer_attr dev_req_params;
 	struct ufs_phy_time_cfg t_cfg;
 	ktime_t entry_hibern8_t;
-- 
2.43.0

[PATCH v2 phy-next 10/24] drm/rockchip: dw_hdmi: avoid direct dereference of phy->dev.of_node

[vladimir.oltean]

The dw_hdmi-rockchip driver validates pixel clock rates against the
HDMI PHY's internal clock provider on certain SoCs like RK3328.
This is currently achieved by dereferencing hdmi->phy->dev.of_node
to obtain the provider node, which violates the Generic PHY API's
encapsulation (the goal is for struct phy to be an opaque pointer).

Refactor dw_hdmi_rockchip_bind() to perform a manual phandle lookup
on the "hdmi" PHY index within the controller's DT node. This provides
a parallel path to the clock provider's OF node without relying on the
internal structure of the struct phy handle.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>

v1->v2: none
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 25 ++++++++++++---------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 0dc1eb5d2ae3..7abb42e486c0 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -537,21 +537,22 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 				 void *data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
+	struct device_node *np = dev_of_node(dev);
 	struct dw_hdmi_plat_data *plat_data;
 	const struct of_device_id *match;
 	struct drm_device *drm = data;
 	struct drm_encoder *encoder;
 	struct rockchip_hdmi *hdmi;
-	int ret;
+	int ret, index;
 
-	if (!pdev->dev.of_node)
+	if (!np)
 		return -ENODEV;
 
 	hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
 	if (!hdmi)
 		return -ENOMEM;
 
-	match = of_match_node(dw_hdmi_rockchip_dt_ids, pdev->dev.of_node);
+	match = of_match_node(dw_hdmi_rockchip_dt_ids, np);
 	plat_data = devm_kmemdup(&pdev->dev, match->data,
 					     sizeof(*plat_data), GFP_KERNEL);
 	if (!plat_data)
@@ -564,9 +565,9 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 	plat_data->priv_data = hdmi;
 	encoder = &hdmi->encoder.encoder;
 
-	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
+	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, np);
 	rockchip_drm_encoder_set_crtc_endpoint_id(&hdmi->encoder,
-						  dev->of_node, 0, 0);
+						  np, 0, 0);
 
 	/*
 	 * If we failed to find the CRTC(s) which this encoder is
@@ -588,13 +589,17 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return dev_err_probe(hdmi->dev, ret, "failed to get phy\n");
 	}
 
-	if (hdmi->phy) {
+	index = of_property_match_string(np, "phy-names", "hdmi");
+	if (index >= 0) {
 		struct of_phandle_args clkspec;
 
-		clkspec.np = hdmi->phy->dev.of_node;
-		hdmi->hdmiphy_clk = of_clk_get_from_provider(&clkspec);
-		if (IS_ERR(hdmi->hdmiphy_clk))
-			hdmi->hdmiphy_clk = NULL;
+		if (!of_parse_phandle_with_args(np, "phys", "#phy-cells", index,
+						&clkspec)) {
+			hdmi->hdmiphy_clk = of_clk_get_from_provider(&clkspec);
+			of_node_put(clkspec.np);
+			if (IS_ERR(hdmi->hdmiphy_clk))
+				hdmi->hdmiphy_clk = NULL;
+		}
 	}
 
 	if (hdmi->chip_data == &rk3568_chip_data) {
-- 
2.43.0

[PATCH v2 phy-next 11/24] drm/msm/dp: remove debugging prints with internal struct phy state

[vladimir.oltean]

These do not provide much value, and will become hard to maintain once
the Generic PHY framework starts hiding the contents of struct phy from
consumers.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Cc: Dmitry Baryshkov <lumag@kernel.org>
Cc: Abhinav Kumar <abhinav.kumar@linux.dev>
Cc: Jessica Zhang <jesszhan0024@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>

v1->v2: collect tag
---
 drivers/gpu/drm/msm/dp/dp_ctrl.c | 18 ------------------
 1 file changed, 18 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index ef298c7d3e5e..cba8a71a2561 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1928,9 +1928,6 @@ void msm_dp_ctrl_phy_init(struct msm_dp_ctrl *msm_dp_ctrl)
 
 	msm_dp_ctrl_phy_reset(ctrl);
 	phy_init(phy);
-
-	drm_dbg_dp(ctrl->drm_dev, "phy=%p init=%d power_on=%d\n",
-			phy, phy->init_count, phy->power_count);
 }
 
 void msm_dp_ctrl_phy_exit(struct msm_dp_ctrl *msm_dp_ctrl)
@@ -1943,8 +1940,6 @@ void msm_dp_ctrl_phy_exit(struct msm_dp_ctrl *msm_dp_ctrl)
 
 	msm_dp_ctrl_phy_reset(ctrl);
 	phy_exit(phy);
-	drm_dbg_dp(ctrl->drm_dev, "phy=%p init=%d power_on=%d\n",
-			phy, phy->init_count, phy->power_count);
 }
 
 static int msm_dp_ctrl_reinitialize_mainlink(struct msm_dp_ctrl_private *ctrl)
@@ -1996,8 +1991,6 @@ static int msm_dp_ctrl_deinitialize_mainlink(struct msm_dp_ctrl_private *ctrl)
 	phy_exit(phy);
 	phy_init(phy);
 
-	drm_dbg_dp(ctrl->drm_dev, "phy=%p init=%d power_on=%d\n",
-			phy, phy->init_count, phy->power_count);
 	return 0;
 }
 
@@ -2588,9 +2581,6 @@ void msm_dp_ctrl_off_link_stream(struct msm_dp_ctrl *msm_dp_ctrl)
 	/* aux channel down, reinit phy */
 	phy_exit(phy);
 	phy_init(phy);
-
-	drm_dbg_dp(ctrl->drm_dev, "phy=%p init=%d power_on=%d\n",
-			phy, phy->init_count, phy->power_count);
 }
 
 void msm_dp_ctrl_off_link(struct msm_dp_ctrl *msm_dp_ctrl)
@@ -2606,13 +2596,7 @@ void msm_dp_ctrl_off_link(struct msm_dp_ctrl *msm_dp_ctrl)
 	dev_pm_opp_set_rate(ctrl->dev, 0);
 	msm_dp_ctrl_link_clk_disable(&ctrl->msm_dp_ctrl);
 
-	DRM_DEBUG_DP("Before, phy=%p init_count=%d power_on=%d\n",
-		phy, phy->init_count, phy->power_count);
-
 	phy_power_off(phy);
-
-	DRM_DEBUG_DP("After, phy=%p init_count=%d power_on=%d\n",
-		phy, phy->init_count, phy->power_count);
 }
 
 void msm_dp_ctrl_off(struct msm_dp_ctrl *msm_dp_ctrl)
@@ -2638,8 +2622,6 @@ void msm_dp_ctrl_off(struct msm_dp_ctrl *msm_dp_ctrl)
 	msm_dp_ctrl_link_clk_disable(&ctrl->msm_dp_ctrl);
 
 	phy_power_off(phy);
-	drm_dbg_dp(ctrl->drm_dev, "phy=%p init=%d power_on=%d\n",
-			phy, phy->init_count, phy->power_count);
 }
 
 irqreturn_t msm_dp_ctrl_isr(struct msm_dp_ctrl *msm_dp_ctrl)
-- 
2.43.0

[PATCH v2 phy-next 12/24] phy: move provider API out of public <linux/phy/phy.h>

[vladimir.oltean]

The major goal is to hide the contents of struct phy from consumer
drivers.

The idea with "phy-props.h" is that both consumers and providers make
use of some data types. So both headers include "phy-props.h".

Some slight points of contention.

1. phy_set_bus_width(): Vinod explains that despite the current caller
   situation (9 providers, 1 consumer), it is a consumer API function.

   The use case is that the controller (for example UFS) may have
   limitations and should set the expected lanes to be used and width on
   those lanes. A number of Generic PHYs can support multiple lanes and
   multiple width so this is way for controller telling I am using this
   configuration.

2. phy-provider.h should go to include/linux/phy/ or to drivers/phy/?
   We do have 3 PHY providers outside of drivers/phy/:

   drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c
   drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
   drivers/pinctrl/tegra/pinctrl-tegra-xusb.c

   but the practice is not encouraged, and with time, these should be
   moved to the subsystem. This is not something that I can do now.

3. We can no longer tolerate static inline helpers. Allowing these would
   make it impossible to hide the struct phy definition from consumers.
   I've made phy_get_mode(), phy_get_bus_width(), phy_set_bus_width()
   exported symbols in drivers/phy/phy-core.c.

4. This is not a change without side effects. In the transition we are
   no longer providing <linux/pm_runtime.h> at all, and
   <linux/regulator/consumer.h> to PHY consumer drivers. However, the
   in-tree dependencies should all have been resolved. Also, the
   movement of phy-provider.h to drivers/phy/ is at least "interesting"
   for out of tree PHY provider drivers (this header is not deployed by
   make headers_install). However, it seems to be what Vinod is looking
   to see.

For temporary compatibility, keep including the provider header. This
will be removed when abuses are all gotten rid of.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
v1->v2:
- collect tag
- fix path to phy-provider.h
- update commit message with the 4th point of contention
---
 drivers/phy/phy-core.c        |  34 +++
 drivers/phy/phy-provider.h    | 256 +++++++++++++++++
 include/linux/phy/phy-props.h |  75 +++++
 include/linux/phy/phy.h       | 497 +++++++---------------------------
 4 files changed, 456 insertions(+), 406 deletions(-)
 create mode 100644 drivers/phy/phy-provider.h
 create mode 100644 include/linux/phy/phy-props.h

diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index 21aaf2f76e53..a1aff00fba7c 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -20,6 +20,22 @@
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 
+#define	to_phy(a)	(container_of((a), struct phy, dev))
+
+/**
+ * struct phy_lookup - PHY association in list of phys managed by the phy driver
+ * @node: list node
+ * @dev_id: the device of the association
+ * @con_id: connection ID string on device
+ * @phy: the phy of the association
+ */
+struct phy_lookup {
+	struct list_head node;
+	const char *dev_id;
+	const char *con_id;
+	struct phy *phy;
+};
+
 static void phy_release(struct device *dev);
 static const struct class phy_class = {
 	.name = "phy",
@@ -606,6 +622,24 @@ int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
 }
 EXPORT_SYMBOL_GPL(phy_validate);
 
+enum phy_mode phy_get_mode(struct phy *phy)
+{
+	return phy->attrs.mode;
+}
+EXPORT_SYMBOL_GPL(phy_get_mode);
+
+int phy_get_bus_width(struct phy *phy)
+{
+	return phy->attrs.bus_width;
+}
+EXPORT_SYMBOL_GPL(phy_get_bus_width);
+
+void phy_set_bus_width(struct phy *phy, int bus_width)
+{
+	phy->attrs.bus_width = bus_width;
+}
+EXPORT_SYMBOL_GPL(phy_set_bus_width);
+
 /**
  * _of_phy_get() - lookup and obtain a reference to a phy by phandle
  * @np: device_node for which to get the phy
diff --git a/drivers/phy/phy-provider.h b/drivers/phy/phy-provider.h
new file mode 100644
index 000000000000..0637278a2d8d
--- /dev/null
+++ b/drivers/phy/phy-provider.h
@@ -0,0 +1,256 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * phy-provider.h -- Generic PHY provider API
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ */
+#ifndef __PHY_PROVIDER_H
+#define __PHY_PROVIDER_H
+
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/phy/phy-props.h>
+
+struct phy;
+
+/**
+ * struct phy_ops - set of function pointers for performing phy operations
+ * @init: operation to be performed for initializing phy
+ * @exit: operation to be performed while exiting
+ * @power_on: powering on the phy
+ * @power_off: powering off the phy
+ * @set_mode: set the mode of the phy
+ * @set_media: set the media type of the phy (optional)
+ * @set_speed: set the speed of the phy (optional)
+ * @reset: resetting the phy
+ * @calibrate: calibrate the phy
+ * @notify_phystate: notify and configure the phy for a particular state
+ * @release: ops to be performed while the consumer relinquishes the PHY
+ * @owner: the module owner containing the ops
+ */
+struct phy_ops {
+	int	(*init)(struct phy *phy);
+	int	(*exit)(struct phy *phy);
+	int	(*power_on)(struct phy *phy);
+	int	(*power_off)(struct phy *phy);
+	int	(*set_mode)(struct phy *phy, enum phy_mode mode, int submode);
+	int	(*set_media)(struct phy *phy, enum phy_media media);
+	int	(*set_speed)(struct phy *phy, int speed);
+
+	/**
+	 * @configure:
+	 *
+	 * Optional.
+	 *
+	 * Used to change the PHY parameters. phy_init() must have
+	 * been called on the phy.
+	 *
+	 * Returns: 0 if successful, an negative error code otherwise
+	 */
+	int	(*configure)(struct phy *phy, union phy_configure_opts *opts);
+
+	/**
+	 * @validate:
+	 *
+	 * Optional.
+	 *
+	 * Used to check that the current set of parameters can be
+	 * handled by the phy. Implementations are free to tune the
+	 * parameters passed as arguments if needed by some
+	 * implementation detail or constraints. It must not change
+	 * any actual configuration of the PHY, so calling it as many
+	 * times as deemed fit by the consumer must have no side
+	 * effect.
+	 *
+	 * Returns: 0 if the configuration can be applied, an negative
+	 * error code otherwise
+	 */
+	int	(*validate)(struct phy *phy, enum phy_mode mode, int submode,
+			    union phy_configure_opts *opts);
+	int	(*reset)(struct phy *phy);
+	int	(*calibrate)(struct phy *phy);
+
+	/* notify phy connect status change */
+	int	(*connect)(struct phy *phy, int port);
+	int	(*disconnect)(struct phy *phy, int port);
+
+	int	(*notify_phystate)(struct phy *phy, union phy_notify state);
+	void	(*release)(struct phy *phy);
+	struct module *owner;
+};
+
+/**
+ * struct phy_attrs - represents phy attributes
+ * @bus_width: Data path width implemented by PHY
+ * @max_link_rate: Maximum link rate supported by PHY (units to be decided by producer and consumer)
+ * @mode: PHY mode
+ */
+struct phy_attrs {
+	u32			bus_width;
+	u32			max_link_rate;
+	enum phy_mode		mode;
+};
+
+/**
+ * struct phy - represents the phy device
+ * @dev: phy device
+ * @id: id of the phy device
+ * @ops: function pointers for performing phy operations
+ * @mutex: mutex to protect phy_ops
+ * @lockdep_key: lockdep information for this mutex
+ * @init_count: used to protect when the PHY is used by multiple consumers
+ * @power_count: used to protect when the PHY is used by multiple consumers
+ * @attrs: used to specify PHY specific attributes
+ * @pwr: power regulator associated with the phy
+ * @debugfs: debugfs directory
+ */
+struct phy {
+	struct device		dev;
+	int			id;
+	const struct phy_ops	*ops;
+	struct mutex		mutex;
+	struct lock_class_key	lockdep_key;
+	int			init_count;
+	int			power_count;
+	struct phy_attrs	attrs;
+	struct regulator	*pwr;
+	struct dentry		*debugfs;
+};
+
+/**
+ * struct phy_provider - represents the phy provider
+ * @dev: phy provider device
+ * @children: can be used to override the default (dev->of_node) child node
+ * @owner: the module owner having of_xlate
+ * @list: to maintain a linked list of PHY providers
+ * @of_xlate: function pointer to obtain phy instance from phy pointer
+ */
+struct phy_provider {
+	struct device		*dev;
+	struct device_node	*children;
+	struct module		*owner;
+	struct list_head	list;
+	struct phy *(*of_xlate)(struct device *dev,
+				const struct of_phandle_args *args);
+};
+
+#define	of_phy_provider_register(dev, xlate)	\
+	__of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate))
+
+#define	devm_of_phy_provider_register(dev, xlate)	\
+	__devm_of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate))
+
+#define of_phy_provider_register_full(dev, children, xlate) \
+	__of_phy_provider_register(dev, children, THIS_MODULE, xlate)
+
+#define devm_of_phy_provider_register_full(dev, children, xlate) \
+	__devm_of_phy_provider_register(dev, children, THIS_MODULE, xlate)
+
+static inline void phy_set_drvdata(struct phy *phy, void *data)
+{
+	dev_set_drvdata(&phy->dev, data);
+}
+
+static inline void *phy_get_drvdata(struct phy *phy)
+{
+	return dev_get_drvdata(&phy->dev);
+}
+
+#if IS_ENABLED(CONFIG_GENERIC_PHY)
+struct phy *phy_create(struct device *dev, struct device_node *node,
+		       const struct phy_ops *ops);
+struct phy *devm_phy_create(struct device *dev, struct device_node *node,
+			    const struct phy_ops *ops);
+void phy_destroy(struct phy *phy);
+void devm_phy_destroy(struct device *dev, struct phy *phy);
+
+struct phy_provider *
+__of_phy_provider_register(struct device *dev, struct device_node *children,
+			   struct module *owner,
+			   struct phy *(*of_xlate)(struct device *dev,
+						   const struct of_phandle_args *args));
+struct phy_provider *
+__devm_of_phy_provider_register(struct device *dev, struct device_node *children,
+				struct module *owner,
+				struct phy *(*of_xlate)(struct device *dev,
+							const struct of_phandle_args *args));
+void of_phy_provider_unregister(struct phy_provider *phy_provider);
+void devm_of_phy_provider_unregister(struct device *dev,
+				     struct phy_provider *phy_provider);
+int phy_create_lookup(struct phy *phy, const char *con_id, const char *dev_id);
+void phy_remove_lookup(struct phy *phy, const char *con_id, const char *dev_id);
+struct phy *of_phy_simple_xlate(struct device *dev,
+				const struct of_phandle_args *args);
+#else
+static inline struct phy *phy_create(struct device *dev,
+				     struct device_node *node,
+				     const struct phy_ops *ops)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy *devm_phy_create(struct device *dev,
+					  struct device_node *node,
+					  const struct phy_ops *ops)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline void phy_destroy(struct phy *phy)
+{
+}
+
+static inline void devm_phy_destroy(struct device *dev, struct phy *phy)
+{
+}
+
+static inline struct phy_provider *
+__of_phy_provider_register(struct device *dev, struct device_node *children,
+			   struct module *owner,
+			   struct phy *(*of_xlate)(struct device *dev,
+						   const struct of_phandle_args *args))
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy_provider *
+__devm_of_phy_provider_register(struct device *dev, struct device_node *children,
+				struct module *owner,
+				struct phy *(*of_xlate)(struct device *dev,
+							const struct of_phandle_args *args))
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline void of_phy_provider_unregister(struct phy_provider *phy_provider)
+{
+}
+
+static inline void devm_of_phy_provider_unregister(struct device *dev,
+						   struct phy_provider *phy_provider)
+{
+}
+
+static inline int phy_create_lookup(struct phy *phy, const char *con_id,
+				    const char *dev_id)
+{
+	return 0;
+}
+
+static inline void phy_remove_lookup(struct phy *phy, const char *con_id,
+				     const char *dev_id)
+{
+}
+
+static inline struct phy *of_phy_simple_xlate(struct device *dev,
+					      const struct of_phandle_args *args)
+{
+	return ERR_PTR(-ENOSYS);
+}
+#endif /* IS_ENABLED(CONFIG_GENERIC_PHY) */
+
+#endif /* __PHY_PROVIDER_H */
diff --git a/include/linux/phy/phy-props.h b/include/linux/phy/phy-props.h
new file mode 100644
index 000000000000..11f36738165f
--- /dev/null
+++ b/include/linux/phy/phy-props.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * phy-provider.h -- Generic PHY properties
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ */
+#ifndef __PHY_PROPS_H
+#define __PHY_PROPS_H
+
+#include <linux/phy/phy-dp.h>
+#include <linux/phy/phy-hdmi.h>
+#include <linux/phy/phy-lvds.h>
+#include <linux/phy/phy-mipi-dphy.h>
+
+enum phy_mode {
+	PHY_MODE_INVALID,
+	PHY_MODE_USB_HOST,
+	PHY_MODE_USB_HOST_LS,
+	PHY_MODE_USB_HOST_FS,
+	PHY_MODE_USB_HOST_HS,
+	PHY_MODE_USB_HOST_SS,
+	PHY_MODE_USB_DEVICE,
+	PHY_MODE_USB_DEVICE_LS,
+	PHY_MODE_USB_DEVICE_FS,
+	PHY_MODE_USB_DEVICE_HS,
+	PHY_MODE_USB_DEVICE_SS,
+	PHY_MODE_USB_OTG,
+	PHY_MODE_UFS_HS_A,
+	PHY_MODE_UFS_HS_B,
+	PHY_MODE_PCIE,
+	PHY_MODE_ETHERNET,
+	PHY_MODE_MIPI_DPHY,
+	PHY_MODE_SATA,
+	PHY_MODE_LVDS,
+	PHY_MODE_DP,
+	PHY_MODE_HDMI,
+};
+
+enum phy_media {
+	PHY_MEDIA_DEFAULT,
+	PHY_MEDIA_SR,
+	PHY_MEDIA_DAC,
+};
+
+enum phy_ufs_state {
+	PHY_UFS_HIBERN8_ENTER,
+	PHY_UFS_HIBERN8_EXIT,
+};
+
+union phy_notify {
+	enum phy_ufs_state ufs_state;
+};
+
+/**
+ * union phy_configure_opts - Opaque generic phy configuration
+ *
+ * @mipi_dphy:	Configuration set applicable for phys supporting
+ *		the MIPI_DPHY phy mode.
+ * @dp:		Configuration set applicable for phys supporting
+ *		the DisplayPort protocol.
+ * @lvds:	Configuration set applicable for phys supporting
+ *		the LVDS phy mode.
+ * @hdmi:	Configuration set applicable for phys supporting
+ *		the HDMI phy mode.
+ */
+union phy_configure_opts {
+	struct phy_configure_opts_mipi_dphy	mipi_dphy;
+	struct phy_configure_opts_dp		dp;
+	struct phy_configure_opts_lvds		lvds;
+	struct phy_configure_opts_hdmi		hdmi;
+};
+
+#endif /* __PHY_PROPS_H */
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index ea47975e288a..f208edd25afe 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -1,246 +1,38 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * phy.h -- generic phy header file
+ * phy.h -- Generic PHY consumer API
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
  *
  * Author: Kishon Vijay Abraham I <kishon@ti.com>
  */
 
-#ifndef __DRIVERS_PHY_H
-#define __DRIVERS_PHY_H
+#ifndef __PHY_CONSUMER_H
+#define __PHY_CONSUMER_H
 
-#include <linux/err.h>
-#include <linux/of.h>
-#include <linux/device.h>
-#include <linux/pm_runtime.h>
-#include <linux/regulator/consumer.h>
+#include <linux/phy/phy-props.h>
 
-#include <linux/phy/phy-dp.h>
-#include <linux/phy/phy-hdmi.h>
-#include <linux/phy/phy-lvds.h>
-#include <linux/phy/phy-mipi-dphy.h>
+#include "../../../drivers/phy/phy-provider.h"
 
+struct device;
+struct device_node;
 struct phy;
 
-enum phy_mode {
-	PHY_MODE_INVALID,
-	PHY_MODE_USB_HOST,
-	PHY_MODE_USB_HOST_LS,
-	PHY_MODE_USB_HOST_FS,
-	PHY_MODE_USB_HOST_HS,
-	PHY_MODE_USB_HOST_SS,
-	PHY_MODE_USB_DEVICE,
-	PHY_MODE_USB_DEVICE_LS,
-	PHY_MODE_USB_DEVICE_FS,
-	PHY_MODE_USB_DEVICE_HS,
-	PHY_MODE_USB_DEVICE_SS,
-	PHY_MODE_USB_OTG,
-	PHY_MODE_UFS_HS_A,
-	PHY_MODE_UFS_HS_B,
-	PHY_MODE_PCIE,
-	PHY_MODE_ETHERNET,
-	PHY_MODE_MIPI_DPHY,
-	PHY_MODE_SATA,
-	PHY_MODE_LVDS,
-	PHY_MODE_DP,
-	PHY_MODE_HDMI,
-};
-
-enum phy_media {
-	PHY_MEDIA_DEFAULT,
-	PHY_MEDIA_SR,
-	PHY_MEDIA_DAC,
-};
-
-enum phy_ufs_state {
-	PHY_UFS_HIBERN8_ENTER,
-	PHY_UFS_HIBERN8_EXIT,
-};
-
-union phy_notify {
-	enum phy_ufs_state ufs_state;
-};
-
-/**
- * union phy_configure_opts - Opaque generic phy configuration
- *
- * @mipi_dphy:	Configuration set applicable for phys supporting
- *		the MIPI_DPHY phy mode.
- * @dp:		Configuration set applicable for phys supporting
- *		the DisplayPort protocol.
- * @lvds:	Configuration set applicable for phys supporting
- *		the LVDS phy mode.
- * @hdmi:	Configuration set applicable for phys supporting
- *		the HDMI phy mode.
- */
-union phy_configure_opts {
-	struct phy_configure_opts_mipi_dphy	mipi_dphy;
-	struct phy_configure_opts_dp		dp;
-	struct phy_configure_opts_lvds		lvds;
-	struct phy_configure_opts_hdmi		hdmi;
-};
-
-/**
- * struct phy_ops - set of function pointers for performing phy operations
- * @init: operation to be performed for initializing phy
- * @exit: operation to be performed while exiting
- * @power_on: powering on the phy
- * @power_off: powering off the phy
- * @set_mode: set the mode of the phy
- * @set_media: set the media type of the phy (optional)
- * @set_speed: set the speed of the phy (optional)
- * @reset: resetting the phy
- * @calibrate: calibrate the phy
- * @notify_phystate: notify and configure the phy for a particular state
- * @release: ops to be performed while the consumer relinquishes the PHY
- * @owner: the module owner containing the ops
- */
-struct phy_ops {
-	int	(*init)(struct phy *phy);
-	int	(*exit)(struct phy *phy);
-	int	(*power_on)(struct phy *phy);
-	int	(*power_off)(struct phy *phy);
-	int	(*set_mode)(struct phy *phy, enum phy_mode mode, int submode);
-	int	(*set_media)(struct phy *phy, enum phy_media media);
-	int	(*set_speed)(struct phy *phy, int speed);
-
-	/**
-	 * @configure:
-	 *
-	 * Optional.
-	 *
-	 * Used to change the PHY parameters. phy_init() must have
-	 * been called on the phy.
-	 *
-	 * Returns: 0 if successful, an negative error code otherwise
-	 */
-	int	(*configure)(struct phy *phy, union phy_configure_opts *opts);
-
-	/**
-	 * @validate:
-	 *
-	 * Optional.
-	 *
-	 * Used to check that the current set of parameters can be
-	 * handled by the phy. Implementations are free to tune the
-	 * parameters passed as arguments if needed by some
-	 * implementation detail or constraints. It must not change
-	 * any actual configuration of the PHY, so calling it as many
-	 * times as deemed fit by the consumer must have no side
-	 * effect.
-	 *
-	 * Returns: 0 if the configuration can be applied, an negative
-	 * error code otherwise
-	 */
-	int	(*validate)(struct phy *phy, enum phy_mode mode, int submode,
-			    union phy_configure_opts *opts);
-	int	(*reset)(struct phy *phy);
-	int	(*calibrate)(struct phy *phy);
-
-	/* notify phy connect status change */
-	int	(*connect)(struct phy *phy, int port);
-	int	(*disconnect)(struct phy *phy, int port);
-
-	int	(*notify_phystate)(struct phy *phy, union phy_notify state);
-	void	(*release)(struct phy *phy);
-	struct module *owner;
-};
-
-/**
- * struct phy_attrs - represents phy attributes
- * @bus_width: Data path width implemented by PHY
- * @max_link_rate: Maximum link rate supported by PHY (units to be decided by producer and consumer)
- * @mode: PHY mode
- */
-struct phy_attrs {
-	u32			bus_width;
-	u32			max_link_rate;
-	enum phy_mode		mode;
-};
-
-/**
- * struct phy - represents the phy device
- * @dev: phy device
- * @id: id of the phy device
- * @ops: function pointers for performing phy operations
- * @mutex: mutex to protect phy_ops
- * @lockdep_key: lockdep information for this mutex
- * @init_count: used to protect when the PHY is used by multiple consumers
- * @power_count: used to protect when the PHY is used by multiple consumers
- * @attrs: used to specify PHY specific attributes
- * @pwr: power regulator associated with the phy
- * @debugfs: debugfs directory
- */
-struct phy {
-	struct device		dev;
-	int			id;
-	const struct phy_ops	*ops;
-	struct mutex		mutex;
-	struct lock_class_key	lockdep_key;
-	int			init_count;
-	int			power_count;
-	struct phy_attrs	attrs;
-	struct regulator	*pwr;
-	struct dentry		*debugfs;
-};
-
-/**
- * struct phy_provider - represents the phy provider
- * @dev: phy provider device
- * @children: can be used to override the default (dev->of_node) child node
- * @owner: the module owner having of_xlate
- * @list: to maintain a linked list of PHY providers
- * @of_xlate: function pointer to obtain phy instance from phy pointer
- */
-struct phy_provider {
-	struct device		*dev;
-	struct device_node	*children;
-	struct module		*owner;
-	struct list_head	list;
-	struct phy * (*of_xlate)(struct device *dev,
-				 const struct of_phandle_args *args);
-};
-
-/**
- * struct phy_lookup - PHY association in list of phys managed by the phy driver
- * @node: list node
- * @dev_id: the device of the association
- * @con_id: connection ID string on device
- * @phy: the phy of the association
- */
-struct phy_lookup {
-	struct list_head node;
-	const char *dev_id;
-	const char *con_id;
-	struct phy *phy;
-};
-
-#define	to_phy(a)	(container_of((a), struct phy, dev))
-
-#define	of_phy_provider_register(dev, xlate)	\
-	__of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate))
-
-#define	devm_of_phy_provider_register(dev, xlate)	\
-	__devm_of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate))
-
-#define of_phy_provider_register_full(dev, children, xlate) \
-	__of_phy_provider_register(dev, children, THIS_MODULE, xlate)
-
-#define devm_of_phy_provider_register_full(dev, children, xlate) \
-	__devm_of_phy_provider_register(dev, children, THIS_MODULE, xlate)
-
-static inline void phy_set_drvdata(struct phy *phy, void *data)
-{
-	dev_set_drvdata(&phy->dev, data);
-}
-
-static inline void *phy_get_drvdata(struct phy *phy)
-{
-	return dev_get_drvdata(&phy->dev);
-}
-
 #if IS_ENABLED(CONFIG_GENERIC_PHY)
+struct phy *phy_get(struct device *dev, const char *string);
+struct phy *devm_phy_get(struct device *dev, const char *string);
+struct phy *devm_phy_optional_get(struct device *dev, const char *string);
+struct phy *devm_of_phy_get(struct device *dev, struct device_node *np,
+			    const char *con_id);
+struct phy *devm_of_phy_optional_get(struct device *dev, struct device_node *np,
+				     const char *con_id);
+struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np,
+				     int index);
+void of_phy_put(struct phy *phy);
+void phy_put(struct device *dev, struct phy *phy);
+void devm_phy_put(struct device *dev, struct phy *phy);
+struct phy *of_phy_get(struct device_node *np, const char *con_id);
+
 int phy_pm_runtime_get(struct phy *phy);
 int phy_pm_runtime_get_sync(struct phy *phy);
 void phy_pm_runtime_put(struct phy *phy);
@@ -257,59 +49,69 @@ int phy_set_speed(struct phy *phy, int speed);
 int phy_configure(struct phy *phy, union phy_configure_opts *opts);
 int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
 		 union phy_configure_opts *opts);
-
-static inline enum phy_mode phy_get_mode(struct phy *phy)
-{
-	return phy->attrs.mode;
-}
+enum phy_mode phy_get_mode(struct phy *phy);
 int phy_reset(struct phy *phy);
 int phy_calibrate(struct phy *phy);
 int phy_notify_connect(struct phy *phy, int port);
 int phy_notify_disconnect(struct phy *phy, int port);
 int phy_notify_state(struct phy *phy, union phy_notify state);
-static inline int phy_get_bus_width(struct phy *phy)
+int phy_get_bus_width(struct phy *phy);
+void phy_set_bus_width(struct phy *phy, int bus_width);
+#else
+static inline struct phy *phy_get(struct device *dev, const char *string)
 {
-	return phy->attrs.bus_width;
+	return ERR_PTR(-ENOSYS);
 }
-static inline void phy_set_bus_width(struct phy *phy, int bus_width)
+
+static inline struct phy *devm_phy_get(struct device *dev, const char *string)
 {
-	phy->attrs.bus_width = bus_width;
+	return ERR_PTR(-ENOSYS);
 }
-struct phy *phy_get(struct device *dev, const char *string);
-struct phy *devm_phy_get(struct device *dev, const char *string);
-struct phy *devm_phy_optional_get(struct device *dev, const char *string);
-struct phy *devm_of_phy_get(struct device *dev, struct device_node *np,
-			    const char *con_id);
-struct phy *devm_of_phy_optional_get(struct device *dev, struct device_node *np,
-				     const char *con_id);
-struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np,
-				     int index);
-void of_phy_put(struct phy *phy);
-void phy_put(struct device *dev, struct phy *phy);
-void devm_phy_put(struct device *dev, struct phy *phy);
-struct phy *of_phy_get(struct device_node *np, const char *con_id);
-struct phy *of_phy_simple_xlate(struct device *dev,
-				const struct of_phandle_args *args);
-struct phy *phy_create(struct device *dev, struct device_node *node,
-		       const struct phy_ops *ops);
-struct phy *devm_phy_create(struct device *dev, struct device_node *node,
-			    const struct phy_ops *ops);
-void phy_destroy(struct phy *phy);
-void devm_phy_destroy(struct device *dev, struct phy *phy);
-struct phy_provider *__of_phy_provider_register(struct device *dev,
-	struct device_node *children, struct module *owner,
-	struct phy * (*of_xlate)(struct device *dev,
-				 const struct of_phandle_args *args));
-struct phy_provider *__devm_of_phy_provider_register(struct device *dev,
-	struct device_node *children, struct module *owner,
-	struct phy * (*of_xlate)(struct device *dev,
-				 const struct of_phandle_args *args));
-void of_phy_provider_unregister(struct phy_provider *phy_provider);
-void devm_of_phy_provider_unregister(struct device *dev,
-	struct phy_provider *phy_provider);
-int phy_create_lookup(struct phy *phy, const char *con_id, const char *dev_id);
-void phy_remove_lookup(struct phy *phy, const char *con_id, const char *dev_id);
-#else
+
+static inline struct phy *devm_phy_optional_get(struct device *dev,
+						const char *string)
+{
+	return NULL;
+}
+
+static inline struct phy *devm_of_phy_get(struct device *dev,
+					  struct device_node *np,
+					  const char *con_id)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy *devm_of_phy_optional_get(struct device *dev,
+						   struct device_node *np,
+						   const char *con_id)
+{
+	return NULL;
+}
+
+static inline struct phy *devm_of_phy_get_by_index(struct device *dev,
+						   struct device_node *np,
+						   int index)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline void of_phy_put(struct phy *phy)
+{
+}
+
+static inline void phy_put(struct device *dev, struct phy *phy)
+{
+}
+
+static inline void devm_phy_put(struct device *dev, struct phy *phy)
+{
+}
+
+static inline struct phy *of_phy_get(struct device_node *np, const char *con_id)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
 static inline int phy_pm_runtime_get(struct phy *phy)
 {
 	if (!phy)
@@ -388,61 +190,59 @@ static inline int phy_set_speed(struct phy *phy, int speed)
 	return -ENODEV;
 }
 
-static inline enum phy_mode phy_get_mode(struct phy *phy)
-{
-	return PHY_MODE_INVALID;
-}
-
-static inline int phy_reset(struct phy *phy)
+static inline int phy_configure(struct phy *phy,
+				union phy_configure_opts *opts)
 {
 	if (!phy)
 		return 0;
 	return -ENOSYS;
 }
 
-static inline int phy_calibrate(struct phy *phy)
+static inline int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
+			       union phy_configure_opts *opts)
 {
 	if (!phy)
 		return 0;
 	return -ENOSYS;
 }
 
-static inline int phy_notify_connect(struct phy *phy, int index)
+static inline enum phy_mode phy_get_mode(struct phy *phy)
+{
+	return PHY_MODE_INVALID;
+}
+
+static inline int phy_reset(struct phy *phy)
 {
 	if (!phy)
 		return 0;
 	return -ENOSYS;
 }
 
-static inline int phy_notify_disconnect(struct phy *phy, int index)
+static inline int phy_calibrate(struct phy *phy)
 {
 	if (!phy)
 		return 0;
 	return -ENOSYS;
 }
 
-static inline int phy_notify_state(struct phy *phy, union phy_notify state)
+static inline int phy_notify_connect(struct phy *phy, int index)
 {
 	if (!phy)
 		return 0;
 	return -ENOSYS;
 }
 
-static inline int phy_configure(struct phy *phy,
-				union phy_configure_opts *opts)
+static inline int phy_notify_disconnect(struct phy *phy, int index)
 {
 	if (!phy)
 		return 0;
-
 	return -ENOSYS;
 }
 
-static inline int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
-			       union phy_configure_opts *opts)
+static inline int phy_notify_state(struct phy *phy, union phy_notify state)
 {
 	if (!phy)
 		return 0;
-
 	return -ENOSYS;
 }
 
@@ -453,122 +253,7 @@ static inline int phy_get_bus_width(struct phy *phy)
 
 static inline void phy_set_bus_width(struct phy *phy, int bus_width)
 {
-	return;
-}
-
-static inline struct phy *phy_get(struct device *dev, const char *string)
-{
-	return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy *devm_phy_get(struct device *dev, const char *string)
-{
-	return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy *devm_phy_optional_get(struct device *dev,
-						const char *string)
-{
-	return NULL;
-}
-
-static inline struct phy *devm_of_phy_get(struct device *dev,
-					  struct device_node *np,
-					  const char *con_id)
-{
-	return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy *devm_of_phy_optional_get(struct device *dev,
-						   struct device_node *np,
-						   const char *con_id)
-{
-	return NULL;
-}
-
-static inline struct phy *devm_of_phy_get_by_index(struct device *dev,
-						   struct device_node *np,
-						   int index)
-{
-	return ERR_PTR(-ENOSYS);
-}
-
-static inline void of_phy_put(struct phy *phy)
-{
-}
-
-static inline void phy_put(struct device *dev, struct phy *phy)
-{
-}
-
-static inline void devm_phy_put(struct device *dev, struct phy *phy)
-{
-}
-
-static inline struct phy *of_phy_get(struct device_node *np, const char *con_id)
-{
-	return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy *of_phy_simple_xlate(struct device *dev,
-					      const struct of_phandle_args *args)
-{
-	return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy *phy_create(struct device *dev,
-				     struct device_node *node,
-				     const struct phy_ops *ops)
-{
-	return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy *devm_phy_create(struct device *dev,
-					  struct device_node *node,
-					  const struct phy_ops *ops)
-{
-	return ERR_PTR(-ENOSYS);
-}
-
-static inline void phy_destroy(struct phy *phy)
-{
-}
-
-static inline void devm_phy_destroy(struct device *dev, struct phy *phy)
-{
-}
-
-static inline struct phy_provider *__of_phy_provider_register(
-	struct device *dev, struct device_node *children, struct module *owner,
-	struct phy * (*of_xlate)(struct device *dev,
-				 const struct of_phandle_args *args))
-{
-	return ERR_PTR(-ENOSYS);
-}
-
-static inline struct phy_provider *__devm_of_phy_provider_register(struct device
-	*dev, struct device_node *children, struct module *owner,
-	struct phy * (*of_xlate)(struct device *dev,
-				 const struct of_phandle_args *args))
-{
-	return ERR_PTR(-ENOSYS);
-}
-
-static inline void of_phy_provider_unregister(struct phy_provider *phy_provider)
-{
-}
-
-static inline void devm_of_phy_provider_unregister(struct device *dev,
-	struct phy_provider *phy_provider)
-{
-}
-static inline int
-phy_create_lookup(struct phy *phy, const char *con_id, const char *dev_id)
-{
-	return 0;
 }
-static inline void phy_remove_lookup(struct phy *phy, const char *con_id,
-				     const char *dev_id) { }
-#endif
+#endif /* IS_ENABLED(CONFIG_GENERIC_PHY) */
 
-#endif /* __DRIVERS_PHY_H */
+#endif /* __PHY_CONSUMER_H */
-- 
2.43.0

[PATCH v2 phy-next 13/24] phy: make phy_get_mode(), phy_(get|set)_bus_width() NULL tolerant

[vladimir.oltean]

The PHY API has an optional "get" which returns NULL, so it needs to
accept that NULL coming back in.

Most PHY functions do this, only the formerly static inline attribute
dereferences did not.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
v1->v2: patch is new
---
 drivers/phy/phy-core.c  | 9 ++++++++-
 include/linux/phy/phy.h | 2 ++
 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index a1aff00fba7c..0d0be494cfd7 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -624,19 +624,26 @@ EXPORT_SYMBOL_GPL(phy_validate);
 
 enum phy_mode phy_get_mode(struct phy *phy)
 {
+	if (!phy)
+		return PHY_MODE_INVALID;
+
 	return phy->attrs.mode;
 }
 EXPORT_SYMBOL_GPL(phy_get_mode);
 
 int phy_get_bus_width(struct phy *phy)
 {
+	if (!phy)
+		return 0;
+
 	return phy->attrs.bus_width;
 }
 EXPORT_SYMBOL_GPL(phy_get_bus_width);
 
 void phy_set_bus_width(struct phy *phy, int bus_width)
 {
-	phy->attrs.bus_width = bus_width;
+	if (phy)
+		phy->attrs.bus_width = bus_width;
 }
 EXPORT_SYMBOL_GPL(phy_set_bus_width);
 
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index f208edd25afe..a7e2432ca1ae 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -248,6 +248,8 @@ static inline int phy_notify_state(struct phy *phy, union phy_notify state)
 
 static inline int phy_get_bus_width(struct phy *phy)
 {
+	if (!phy)
+		return 0;
 	return -ENOSYS;
 }
 
-- 
2.43.0

[PATCH v2 phy-next 14/24] phy: introduce phy_get_max_link_rate() helper for consumers

[vladimir.oltean]

Consumer drivers shouldn't dereference struct phy, not even to get to
its attributes.

We have phy_get_bus_width() as a precedent for getting the bus_width
attribute, so let's add phy_get_max_link_rate() and use it in DRM and
CAN drivers.

In CAN drivers, the transceiver is acquired through devm_phy_optional_get()
and NULL is given by the API as a non-error case, so the PHY API should
also tolerate NULL coming back to it. This means we can further simplify
the call sites that test for the NULL quality of the transceiver.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Markus Schneider-Pargmann <msp@baylibre.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Magnus Damm <magnus.damm@gmail.com>

v1->v2: make phy_get_bus_width() NULL-tolerant to simplify CAN callers
---
 drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c | 4 ++--
 drivers/gpu/drm/bridge/synopsys/dw-dp.c             | 2 +-
 drivers/net/can/at91_can.c                          | 3 +--
 drivers/net/can/flexcan/flexcan-core.c              | 3 +--
 drivers/net/can/m_can/m_can_platform.c              | 3 +--
 drivers/net/can/rcar/rcar_canfd.c                   | 3 +--
 drivers/phy/phy-core.c                              | 9 +++++++++
 include/linux/phy/phy.h                             | 6 ++++++
 8 files changed, 22 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
index a8b6ae58cb0a..ed7ed82ddb64 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
@@ -1300,7 +1300,7 @@ static u32 cdns_mhdp_get_training_interval_us(struct cdns_mhdp_device *mhdp,
 
 static void cdns_mhdp_fill_host_caps(struct cdns_mhdp_device *mhdp)
 {
-	unsigned int link_rate;
+	u32 link_rate;
 
 	/* Get source capabilities based on PHY attributes */
 
@@ -1308,7 +1308,7 @@ static void cdns_mhdp_fill_host_caps(struct cdns_mhdp_device *mhdp)
 	if (!mhdp->host.lanes_cnt)
 		mhdp->host.lanes_cnt = 4;
 
-	link_rate = mhdp->phy->attrs.max_link_rate;
+	link_rate = phy_get_max_link_rate(mhdp->phy);
 	if (!link_rate)
 		link_rate = drm_dp_bw_code_to_link_rate(DP_LINK_BW_8_1);
 	else
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
index 4ab6922dd79c..79c72ee8e263 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
@@ -536,7 +536,7 @@ static int dw_dp_link_parse(struct dw_dp *dp, struct drm_connector *connector)
 
 	link->revision = link->dpcd[DP_DPCD_REV];
 	link->rate = min_t(u32, min(dp->plat_data.max_link_rate,
-				    dp->phy->attrs.max_link_rate * 100),
+				    phy_get_max_link_rate(dp->phy) * 100),
 			   drm_dp_max_link_rate(link->dpcd));
 	link->lanes = min_t(u8, phy_get_bus_width(dp->phy),
 			    drm_dp_max_lane_count(link->dpcd));
diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index 58da323f14d7..7749da0a58f6 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -1125,8 +1125,7 @@ static int at91_can_probe(struct platform_device *pdev)
 
 	can_rx_offload_add_timestamp(dev, &priv->offload);
 
-	if (transceiver)
-		priv->can.bitrate_max = transceiver->attrs.max_link_rate;
+	priv->can.bitrate_max = phy_get_max_link_rate(transceiver);
 
 	if (at91_is_sam9263(priv))
 		dev->sysfs_groups[0] = &at91_sysfs_attr_group;
diff --git a/drivers/net/can/flexcan/flexcan-core.c b/drivers/net/can/flexcan/flexcan-core.c
index f5d22c61503f..093e48b8da58 100644
--- a/drivers/net/can/flexcan/flexcan-core.c
+++ b/drivers/net/can/flexcan/flexcan-core.c
@@ -2210,8 +2210,7 @@ static int flexcan_probe(struct platform_device *pdev)
 	priv->reg_xceiver = reg_xceiver;
 	priv->transceiver = transceiver;
 
-	if (transceiver)
-		priv->can.bitrate_max = transceiver->attrs.max_link_rate;
+	priv->can.bitrate_max = phy_get_max_link_rate(transceiver);
 
 	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
 		priv->irq_boff = platform_get_irq(pdev, 1);
diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
index 56da411878af..2a0f163a683a 100644
--- a/drivers/net/can/m_can/m_can_platform.c
+++ b/drivers/net/can/m_can/m_can_platform.c
@@ -131,8 +131,7 @@ static int m_can_plat_probe(struct platform_device *pdev)
 		goto probe_fail;
 	}
 
-	if (transceiver)
-		mcan_class->can.bitrate_max = transceiver->attrs.max_link_rate;
+	mcan_class->can.bitrate_max = phy_get_max_link_rate(transceiver);
 
 	priv->base = addr;
 	priv->mram_base = mram_addr;
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index eaf8cac78038..9062db48d477 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -1884,8 +1884,7 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch,
 	priv->transceiver = transceiver;
 	priv->channel = ch;
 	priv->gpriv = gpriv;
-	if (transceiver)
-		priv->can.bitrate_max = transceiver->attrs.max_link_rate;
+	priv->can.bitrate_max = phy_get_max_link_rate(transceiver);
 	priv->can.clock.freq = fcan_freq;
 	dev_info(dev, "can_clk rate is %u\n", priv->can.clock.freq);
 
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index 0d0be494cfd7..737a760d97d1 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -647,6 +647,15 @@ void phy_set_bus_width(struct phy *phy, int bus_width)
 }
 EXPORT_SYMBOL_GPL(phy_set_bus_width);
 
+u32 phy_get_max_link_rate(struct phy *phy)
+{
+	if (!phy)
+		return 0;
+
+	return phy->attrs.max_link_rate;
+}
+EXPORT_SYMBOL_GPL(phy_get_max_link_rate);
+
 /**
  * _of_phy_get() - lookup and obtain a reference to a phy by phandle
  * @np: device_node for which to get the phy
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index a7e2432ca1ae..34b656084caf 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -57,6 +57,7 @@ int phy_notify_disconnect(struct phy *phy, int port);
 int phy_notify_state(struct phy *phy, union phy_notify state);
 int phy_get_bus_width(struct phy *phy);
 void phy_set_bus_width(struct phy *phy, int bus_width);
+u32 phy_get_max_link_rate(struct phy *phy);
 #else
 static inline struct phy *phy_get(struct device *dev, const char *string)
 {
@@ -256,6 +257,11 @@ static inline int phy_get_bus_width(struct phy *phy)
 static inline void phy_set_bus_width(struct phy *phy, int bus_width)
 {
 }
+
+static inline u32 phy_get_max_link_rate(struct phy *phy)
+{
+	return 0;
+}
 #endif /* IS_ENABLED(CONFIG_GENERIC_PHY) */
 
 #endif /* __PHY_CONSUMER_H */
-- 
2.43.0

Re: [PATCH v2 phy-next 14/24] phy: introduce phy_get_max_link_rate() helper for consumers

[Markus Schneider-Pargmann]

[-- Attachment #1: Type: text/plain, Size: 8081 bytes --]

Hi,

On Sun Mar 8, 2026 at 12:39 PM CET, vladimir.oltean wrote:
> Consumer drivers shouldn't dereference struct phy, not even to get to
> its attributes.
>
> We have phy_get_bus_width() as a precedent for getting the bus_width
> attribute, so let's add phy_get_max_link_rate() and use it in DRM and
> CAN drivers.
>
> In CAN drivers, the transceiver is acquired through devm_phy_optional_get()
> and NULL is given by the API as a non-error case, so the PHY API should
> also tolerate NULL coming back to it. This means we can further simplify
> the call sites that test for the NULL quality of the transceiver.

Thanks for adding this.

>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> ---
> Cc: Andrzej Hajda <andrzej.hajda@intel.com>
> Cc: Neil Armstrong <neil.armstrong@linaro.org>
> Cc: Robert Foss <rfoss@kernel.org>
> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
> Cc: Jonas Karlman <jonas@kwiboo.se>
> Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Thomas Zimmermann <tzimmermann@suse.de>
> Cc: David Airlie <airlied@gmail.com>
> Cc: Simona Vetter <simona@ffwll.ch>
> Cc: Andy Yan <andy.yan@rock-chips.com>
> Cc: Marc Kleine-Budde <mkl@pengutronix.de>
> Cc: Vincent Mailhol <mailhol@kernel.org>
> Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
> Cc: Markus Schneider-Pargmann <msp@baylibre.com>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Magnus Damm <magnus.damm@gmail.com>
>
> v1->v2: make phy_get_bus_width() NULL-tolerant to simplify CAN callers
> ---
>  drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c | 4 ++--
>  drivers/gpu/drm/bridge/synopsys/dw-dp.c             | 2 +-
>  drivers/net/can/at91_can.c                          | 3 +--
>  drivers/net/can/flexcan/flexcan-core.c              | 3 +--
>  drivers/net/can/m_can/m_can_platform.c              | 3 +--

For m_can:
Acked-by: Markus Schneider-Pargmann <msp@baylibre.com>

Best
Markus

>  drivers/net/can/rcar/rcar_canfd.c                   | 3 +--
>  drivers/phy/phy-core.c                              | 9 +++++++++
>  include/linux/phy/phy.h                             | 6 ++++++
>  8 files changed, 22 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
> index a8b6ae58cb0a..ed7ed82ddb64 100644
> --- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
> +++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
> @@ -1300,7 +1300,7 @@ static u32 cdns_mhdp_get_training_interval_us(struct cdns_mhdp_device *mhdp,
>  
>  static void cdns_mhdp_fill_host_caps(struct cdns_mhdp_device *mhdp)
>  {
> -	unsigned int link_rate;
> +	u32 link_rate;
>  
>  	/* Get source capabilities based on PHY attributes */
>  
> @@ -1308,7 +1308,7 @@ static void cdns_mhdp_fill_host_caps(struct cdns_mhdp_device *mhdp)
>  	if (!mhdp->host.lanes_cnt)
>  		mhdp->host.lanes_cnt = 4;
>  
> -	link_rate = mhdp->phy->attrs.max_link_rate;
> +	link_rate = phy_get_max_link_rate(mhdp->phy);
>  	if (!link_rate)
>  		link_rate = drm_dp_bw_code_to_link_rate(DP_LINK_BW_8_1);
>  	else
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
> index 4ab6922dd79c..79c72ee8e263 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
> @@ -536,7 +536,7 @@ static int dw_dp_link_parse(struct dw_dp *dp, struct drm_connector *connector)
>  
>  	link->revision = link->dpcd[DP_DPCD_REV];
>  	link->rate = min_t(u32, min(dp->plat_data.max_link_rate,
> -				    dp->phy->attrs.max_link_rate * 100),
> +				    phy_get_max_link_rate(dp->phy) * 100),
>  			   drm_dp_max_link_rate(link->dpcd));
>  	link->lanes = min_t(u8, phy_get_bus_width(dp->phy),
>  			    drm_dp_max_lane_count(link->dpcd));
> diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
> index 58da323f14d7..7749da0a58f6 100644
> --- a/drivers/net/can/at91_can.c
> +++ b/drivers/net/can/at91_can.c
> @@ -1125,8 +1125,7 @@ static int at91_can_probe(struct platform_device *pdev)
>  
>  	can_rx_offload_add_timestamp(dev, &priv->offload);
>  
> -	if (transceiver)
> -		priv->can.bitrate_max = transceiver->attrs.max_link_rate;
> +	priv->can.bitrate_max = phy_get_max_link_rate(transceiver);
>  
>  	if (at91_is_sam9263(priv))
>  		dev->sysfs_groups[0] = &at91_sysfs_attr_group;
> diff --git a/drivers/net/can/flexcan/flexcan-core.c b/drivers/net/can/flexcan/flexcan-core.c
> index f5d22c61503f..093e48b8da58 100644
> --- a/drivers/net/can/flexcan/flexcan-core.c
> +++ b/drivers/net/can/flexcan/flexcan-core.c
> @@ -2210,8 +2210,7 @@ static int flexcan_probe(struct platform_device *pdev)
>  	priv->reg_xceiver = reg_xceiver;
>  	priv->transceiver = transceiver;
>  
> -	if (transceiver)
> -		priv->can.bitrate_max = transceiver->attrs.max_link_rate;
> +	priv->can.bitrate_max = phy_get_max_link_rate(transceiver);
>  
>  	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
>  		priv->irq_boff = platform_get_irq(pdev, 1);
> diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
> index 56da411878af..2a0f163a683a 100644
> --- a/drivers/net/can/m_can/m_can_platform.c
> +++ b/drivers/net/can/m_can/m_can_platform.c
> @@ -131,8 +131,7 @@ static int m_can_plat_probe(struct platform_device *pdev)
>  		goto probe_fail;
>  	}
>  
> -	if (transceiver)
> -		mcan_class->can.bitrate_max = transceiver->attrs.max_link_rate;
> +	mcan_class->can.bitrate_max = phy_get_max_link_rate(transceiver);
>  
>  	priv->base = addr;
>  	priv->mram_base = mram_addr;
> diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
> index eaf8cac78038..9062db48d477 100644
> --- a/drivers/net/can/rcar/rcar_canfd.c
> +++ b/drivers/net/can/rcar/rcar_canfd.c
> @@ -1884,8 +1884,7 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch,
>  	priv->transceiver = transceiver;
>  	priv->channel = ch;
>  	priv->gpriv = gpriv;
> -	if (transceiver)
> -		priv->can.bitrate_max = transceiver->attrs.max_link_rate;
> +	priv->can.bitrate_max = phy_get_max_link_rate(transceiver);
>  	priv->can.clock.freq = fcan_freq;
>  	dev_info(dev, "can_clk rate is %u\n", priv->can.clock.freq);
>  
> diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
> index 0d0be494cfd7..737a760d97d1 100644
> --- a/drivers/phy/phy-core.c
> +++ b/drivers/phy/phy-core.c
> @@ -647,6 +647,15 @@ void phy_set_bus_width(struct phy *phy, int bus_width)
>  }
>  EXPORT_SYMBOL_GPL(phy_set_bus_width);
>  
> +u32 phy_get_max_link_rate(struct phy *phy)
> +{
> +	if (!phy)
> +		return 0;
> +
> +	return phy->attrs.max_link_rate;
> +}
> +EXPORT_SYMBOL_GPL(phy_get_max_link_rate);
> +
>  /**
>   * _of_phy_get() - lookup and obtain a reference to a phy by phandle
>   * @np: device_node for which to get the phy
> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> index a7e2432ca1ae..34b656084caf 100644
> --- a/include/linux/phy/phy.h
> +++ b/include/linux/phy/phy.h
> @@ -57,6 +57,7 @@ int phy_notify_disconnect(struct phy *phy, int port);
>  int phy_notify_state(struct phy *phy, union phy_notify state);
>  int phy_get_bus_width(struct phy *phy);
>  void phy_set_bus_width(struct phy *phy, int bus_width);
> +u32 phy_get_max_link_rate(struct phy *phy);
>  #else
>  static inline struct phy *phy_get(struct device *dev, const char *string)
>  {
> @@ -256,6 +257,11 @@ static inline int phy_get_bus_width(struct phy *phy)
>  static inline void phy_set_bus_width(struct phy *phy, int bus_width)
>  {
>  }
> +
> +static inline u32 phy_get_max_link_rate(struct phy *phy)
> +{
> +	return 0;
> +}
>  #endif /* IS_ENABLED(CONFIG_GENERIC_PHY) */
>  
>  #endif /* __PHY_CONSUMER_H */


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 289 bytes --]

[PATCH v2 phy-next 15/24] drm/rockchip: dsi: include PHY provider header

[vladimir.oltean]

The Rockchip DSI controller is a PHY consumer driver, which is also a
PHY provider (calls devm_phy_create()) that lives out of drivers/phy/.

According to Vinod, this is discouraged, although it would be difficult
for me to address a proper movement here.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>

v1->v2: none
---
 drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
index 3547d91b25d3..c0aaa51e0237 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
@@ -27,6 +27,7 @@
 #include <drm/drm_print.h>
 #include <drm/drm_simple_kms_helper.h>
 
+#include "../../../phy/phy-provider.h" /* FIXME */
 #include "rockchip_drm_drv.h"
 
 #define DSI_PHY_RSTZ			0xa0
-- 
2.43.0

[PATCH v2 phy-next 16/24] drm: bridge: cdns-mhdp8546: use consumer API for getting PHY bus width

[vladimir.oltean]

The Cadence MHDP8546 DP bridge driver gets the PHY bus_width attribute
(holding number of lanes) directly, but doing this will no longer be
possible after the definition of struct phy is hidden from consumers.

Use the phy_get_bus_width() API function designed specifically for
consumers.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>

v1->v2: none
---
 drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
index ed7ed82ddb64..e3f8a281f147 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
@@ -1304,7 +1304,7 @@ static void cdns_mhdp_fill_host_caps(struct cdns_mhdp_device *mhdp)
 
 	/* Get source capabilities based on PHY attributes */
 
-	mhdp->host.lanes_cnt = mhdp->phy->attrs.bus_width;
+	mhdp->host.lanes_cnt = phy_get_bus_width(mhdp->phy);
 	if (!mhdp->host.lanes_cnt)
 		mhdp->host.lanes_cnt = 4;
 
-- 
2.43.0

[PATCH v2 phy-next 17/24] media: sunxi: a83-mips-csi2: include PHY provider header

[vladimir.oltean]

The introduction commit 576d196c522b ("media: sunxi: Add support for the
A83T MIPI CSI-2 controller") says:

    This implementation splits the protocol and D-PHY registers and
    uses the PHY framework internally. The D-PHY is not registered as a
    standalone PHY driver since it cannot be used with any other
    controller.

However, this does not matter, and is not the only instance of tight PHY
provider <-> consumer pairing. According to Vinod Koul, having PHY
provider drivers outside of drivers/phy/ is discouraged, although it
would be difficult for me to address a proper movement here.

So just include the private provider API header from drivers/phy/ and
leave a FIXME in place.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Chen-Yu Tsai <wens@kernel.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>

v1->v2: none
---
 .../media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c
index 24bbcc85013d..1143feeb4fcb 100644
--- a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c
+++ b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c
@@ -4,9 +4,9 @@
  * Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
  */
 
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 
+#include "../../../../phy/phy-provider.h" /* FIXME */
 #include "sun8i_a83t_dphy.h"
 #include "sun8i_a83t_mipi_csi2.h"
 
-- 
2.43.0

[PATCH v2 phy-next 18/24] net: renesas: rswitch: include PHY provider header

[vladimir.oltean]

As a PHY consumer driver, the Renesas rswitch dereferences internal
fields of struct phy, something which shouldn't be done, as that is
going to be made an opaque pointer.

It is quite clearly visible that the driver is tightly coupled with the
drivers/phy/renesas/r8a779f0-ether-serdes.c, which puts heavy pressure
on the Generic PHY subsystem.

This was discussed before here:
https://lore.kernel.org/linux-phy/20260211194541.cdmibrpfn6ej6e74@skbuf/

but to summarize, it is generally expected that when a Generic PHY
function is called, it takes effect immediately. When this doesn't
happen, the PHY provider driver must change its implementation rather
than the consumer be made to work around it. PHY providers which rely on
a hardcoded call sequence in the consumer are just lazy and wrong.

The most obvious example is commit 5cb630925b49 ("net: renesas: rswitch:
Add phy_power_{on,off}() calling"). Problem description:
- Ethernet PHYs may change phydev->interface. When this happens, the
  SerDes must learn of the new phydev->interface using phy_set_mode_ext().
- drivers/phy/renesas/r8a779f0-ether-serdes.c implements phy_set_mode_ext(),
  but this only caches the mode and submode into channel->phy_interface
  and applies this to hardware during phy_power_on().

The commit author decided to work around this at the consumer site, by
power cycling the PHY for the configuration to take effect.

This had a worse implication from an API perspective in subsequent
commit 053f13f67be6 ("rswitch: Fix imbalance phy_power_off() calling").
It was observed that phy_power_on() and phy_power_off() calls need to be
balanced, and so, the consumer decided to start looking at the struct
phy :: power_count (the technical reason why I'm making this change).

This is also wrong from an API perspective because
- a consumer should only care about its own vote on the PHY power state.
  If this is a multi-port submode like QSGMII, a single phy_power_off()
  call will not actually turn the PHY off (nor should it).
- the power_count is written under the &phy->mutex, but read unlocked
  here.

The rswitch and r8a779f0-ether-serdes drivers both need to be completely
rethought in terms of Generic PHY API call sequence. There is no quick
fix to apply. Just include the PHY provider API along with the consumer
one, to keep working as before when struct phy will be made an opaque
pointer to normal PHY consumers. But this is a bad offender (and it's
not even a provider) so add a FIXME.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Michael Dege <michael.dege@renesas.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>

v1->v2: collect tag
---
 drivers/net/ethernet/renesas/rswitch_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/renesas/rswitch_main.c b/drivers/net/ethernet/renesas/rswitch_main.c
index 6fe964816322..132be5f15073 100644
--- a/drivers/net/ethernet/renesas/rswitch_main.c
+++ b/drivers/net/ethernet/renesas/rswitch_main.c
@@ -27,6 +27,7 @@
 #include <linux/spinlock.h>
 #include <linux/sys_soc.h>
 
+#include "../../../phy/phy-provider.h" /* FIXME */
 #include "rswitch.h"
 #include "rswitch_l2.h"
 
-- 
2.43.0

[PATCH v2 phy-next 19/24] pinctrl: tegra-xusb: include PHY provider header

[vladimir.oltean]

The tegra-xusb pinctrl driver is also a PHY provider (calls
devm_phy_create() for PCIe and SATA). However, according to Vinod Koul,
having PHY provider drivers outside of drivers/phy/ is discouraged,
although it would be difficult for me to address a proper movement here.

Include the private provider API header from drivers/phy/, but leave a
FIXME in place. It will have to be moved, eventually.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
---
Cc: Linus Walleij <linusw@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

v1->v2: collect tag
---
 drivers/pinctrl/tegra/pinctrl-tegra-xusb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c b/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c
index c6a51bb21215..6b609bf685c7 100644
--- a/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c
+++ b/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c
@@ -7,7 +7,6 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 #include <linux/seq_file.h>
@@ -19,6 +18,7 @@
 
 #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
 
+#include "../../phy/phy-provider.h" /* FIXME */
 #include "../core.h"
 #include "../pinctrl-utils.h"
 
-- 
2.43.0

[PATCH v2 phy-next 20/24] power: supply: cpcap-charger: include missing <linux/property.h>

[vladimir.oltean]

This file uses dev_fwnode() without including the proper header for it,
relying on transitive header inclusion from:

drivers/power/supply/cpcap-charger.c
- include/linux/phy/omap_usb.h
  - include/linux/usb/phy_companion.h
    - include/linux/usb/otg.h
      - include/linux/phy/phy.h
        - drivers/phy/phy-provider.h
          - include/linux/of.h
            - include/linux/property.h

With the future removal of drivers/phy/phy-provider.h from
include/linux/phy/phy.h, this transitive inclusion would break.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
Cc: Sebastian Reichel <sre@kernel.org>

v1->v2: collect tag
---
 drivers/power/supply/cpcap-charger.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/power/supply/cpcap-charger.c b/drivers/power/supply/cpcap-charger.c
index d0c3008db534..24221244b45b 100644
--- a/drivers/power/supply/cpcap-charger.c
+++ b/drivers/power/supply/cpcap-charger.c
@@ -21,6 +21,7 @@
 #include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 
 #include <linux/gpio/consumer.h>
-- 
2.43.0

[PATCH v2 phy-next 21/24] phy: include PHY provider header (1/2)

[vladimir.oltean]

The majority of PHY drivers are PHY providers (obviously).

Some are providers *and* consumers (phy-meson-axg-mipi-dphy,
phy-meson-axg-pcie). These are the Amlogic AXG SoCs, which split the
physical layer into two chained PHYs: the digital layer and the analog
layer. The DSI or PCIe controller interacts only with the digital PHY,
presumably for simplicity.

The rest of PHY drivers which include <linux/phy/phy.h> do so because
they call phy_set_bus_width(), a consumer function.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
v1->v2: split in two parts to pass through linux-phy mailing list
moderation
---
 drivers/phy/allwinner/phy-sun4i-usb.c                 | 3 ++-
 drivers/phy/allwinner/phy-sun50i-usb3.c               | 3 ++-
 drivers/phy/allwinner/phy-sun6i-mipi-dphy.c           | 4 ++--
 drivers/phy/allwinner/phy-sun9i-usb.c                 | 3 ++-
 drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c         | 2 ++
 drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c  | 3 ++-
 drivers/phy/amlogic/phy-meson-axg-pcie.c              | 2 ++
 drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c | 3 ++-
 drivers/phy/amlogic/phy-meson-g12a-usb2.c             | 2 ++
 drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c        | 3 ++-
 drivers/phy/amlogic/phy-meson-gxl-usb2.c              | 3 ++-
 drivers/phy/amlogic/phy-meson8-hdmi-tx.c              | 3 ++-
 drivers/phy/amlogic/phy-meson8b-usb2.c                | 3 ++-
 drivers/phy/apple/atc.c                               | 3 ++-
 drivers/phy/broadcom/phy-bcm-cygnus-pcie.c            | 3 ++-
 drivers/phy/broadcom/phy-bcm-kona-usb2.c              | 4 +++-
 drivers/phy/broadcom/phy-bcm-ns-usb2.c                | 3 ++-
 drivers/phy/broadcom/phy-bcm-ns-usb3.c                | 3 ++-
 drivers/phy/broadcom/phy-bcm-ns2-pcie.c               | 3 ++-
 drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c             | 3 ++-
 drivers/phy/broadcom/phy-bcm-sr-pcie.c                | 3 ++-
 drivers/phy/broadcom/phy-bcm-sr-usb.c                 | 3 ++-
 drivers/phy/broadcom/phy-bcm63xx-usbh.c               | 3 ++-
 drivers/phy/broadcom/phy-brcm-sata.c                  | 3 ++-
 drivers/phy/broadcom/phy-brcm-usb.c                   | 2 +-
 drivers/phy/cadence/cdns-dphy-rx.c                    | 3 ++-
 drivers/phy/cadence/cdns-dphy.c                       | 4 ++--
 drivers/phy/cadence/phy-cadence-salvo.c               | 3 ++-
 drivers/phy/cadence/phy-cadence-sierra.c              | 3 ++-
 drivers/phy/cadence/phy-cadence-torrent.c             | 3 ++-
 drivers/phy/canaan/phy-k230-usb.c                     | 3 ++-
 drivers/phy/eswin/phy-eic7700-sata.c                  | 3 ++-
 drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c        | 3 ++-
 drivers/phy/freescale/phy-fsl-imx8m-pcie.c            | 4 ++--
 drivers/phy/freescale/phy-fsl-imx8mq-usb.c            | 3 ++-
 drivers/phy/freescale/phy-fsl-imx8qm-hsio.c           | 6 +++---
 drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c       | 3 ++-
 drivers/phy/freescale/phy-fsl-lynx-28g.c              | 3 ++-
 drivers/phy/hisilicon/phy-hi3660-usb3.c               | 3 ++-
 drivers/phy/hisilicon/phy-hi3670-pcie.c               | 3 ++-
 drivers/phy/hisilicon/phy-hi3670-usb3.c               | 3 ++-
 drivers/phy/hisilicon/phy-hi6220-usb.c                | 3 ++-
 drivers/phy/hisilicon/phy-hisi-inno-usb2.c            | 4 +++-
 drivers/phy/hisilicon/phy-histb-combphy.c             | 3 ++-
 drivers/phy/hisilicon/phy-hix5hd2-sata.c              | 3 ++-
 drivers/phy/ingenic/phy-ingenic-usb.c                 | 3 ++-
 drivers/phy/intel/phy-intel-keembay-emmc.c            | 3 ++-
 drivers/phy/intel/phy-intel-keembay-usb.c             | 3 ++-
 drivers/phy/intel/phy-intel-lgm-combo.c               | 4 ++--
 drivers/phy/intel/phy-intel-lgm-emmc.c                | 3 ++-
 drivers/phy/lantiq/phy-lantiq-rcu-usb2.c              | 3 ++-
 drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c           | 4 ++--
 drivers/phy/marvell/phy-armada375-usb2.c              | 3 ++-
 drivers/phy/marvell/phy-armada38x-comphy.c            | 3 ++-
 drivers/phy/marvell/phy-berlin-sata.c                 | 3 ++-
 drivers/phy/marvell/phy-berlin-usb.c                  | 3 ++-
 drivers/phy/marvell/phy-mmp3-hsic.c                   | 3 ++-
 drivers/phy/marvell/phy-mmp3-usb.c                    | 3 ++-
 drivers/phy/marvell/phy-mvebu-a3700-comphy.c          | 3 ++-
 drivers/phy/marvell/phy-mvebu-a3700-utmi.c            | 3 ++-
 drivers/phy/marvell/phy-mvebu-cp110-comphy.c          | 3 ++-
 drivers/phy/marvell/phy-mvebu-cp110-utmi.c            | 3 ++-
 drivers/phy/marvell/phy-mvebu-sata.c                  | 3 ++-
 drivers/phy/marvell/phy-pxa-28nm-hsic.c               | 3 ++-
 drivers/phy/marvell/phy-pxa-28nm-usb2.c               | 3 ++-
 drivers/phy/marvell/phy-pxa-usb.c                     | 3 ++-
 drivers/phy/mediatek/phy-mtk-dp.c                     | 3 ++-
 drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c            | 1 -
 drivers/phy/mediatek/phy-mtk-hdmi.h                   | 3 ++-
 drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c           | 2 +-
 drivers/phy/mediatek/phy-mtk-mipi-dsi.h               | 3 ++-
 drivers/phy/mediatek/phy-mtk-pcie.c                   | 2 +-
 drivers/phy/mediatek/phy-mtk-tphy.c                   | 2 +-
 drivers/phy/mediatek/phy-mtk-ufs.c                    | 2 +-
 drivers/phy/mediatek/phy-mtk-xfi-tphy.c               | 2 +-
 drivers/phy/mediatek/phy-mtk-xsphy.c                  | 2 +-
 drivers/phy/microchip/lan966x_serdes.c                | 4 ++--
 drivers/phy/microchip/sparx5_serdes.c                 | 2 +-
 drivers/phy/motorola/phy-cpcap-usb.c                  | 3 ++-
 drivers/phy/motorola/phy-mapphone-mdm6600.c           | 4 +++-
 drivers/phy/mscc/phy-ocelot-serdes.c                  | 3 ++-
 drivers/phy/nuvoton/phy-ma35d1-usb2.c                 | 3 ++-
 drivers/phy/phy-airoha-pcie.c                         | 2 +-
 drivers/phy/phy-can-transceiver.c                     | 3 ++-
 drivers/phy/phy-core-mipi-dphy.c                      | 4 ++--
 drivers/phy/phy-core.c                                | 2 ++
 drivers/phy/phy-google-usb.c                          | 3 ++-
 drivers/phy/phy-lpc18xx-usb-otg.c                     | 3 ++-
 drivers/phy/phy-nxp-ptn3222.c                         | 3 ++-
 drivers/phy/phy-pistachio-usb.c                       | 4 ++--
 drivers/phy/phy-snps-eusb2.c                          | 2 ++
 drivers/phy/phy-xgene.c                               | 3 ++-
 92 files changed, 177 insertions(+), 97 deletions(-)

diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index e2fbf8ccf99e..9a03b5944b98 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -23,7 +23,6 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/phy/phy-sun4i-usb.h>
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
@@ -33,6 +32,8 @@
 #include <linux/usb/of.h>
 #include <linux/workqueue.h>
 
+#include "../phy-provider.h"
+
 #define REG_ISCR			0x00
 #define REG_PHYCTL_A10			0x04
 #define REG_PHYBIST			0x08
diff --git a/drivers/phy/allwinner/phy-sun50i-usb3.c b/drivers/phy/allwinner/phy-sun50i-usb3.c
index 363f9a0df503..d38b26e4bf95 100644
--- a/drivers/phy/allwinner/phy-sun50i-usb3.c
+++ b/drivers/phy/allwinner/phy-sun50i-usb3.c
@@ -18,10 +18,11 @@
 #include <linux/io.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 /* Interface Status and Control Registers */
 #define SUNXI_ISCR			0x00
 #define SUNXI_PIPE_CLOCK_CONTROL	0x14
diff --git a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
index 36eab95271b2..e96162d078eb 100644
--- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
+++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
@@ -10,12 +10,12 @@
 #include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
+#include <linux/phy/phy-mipi-dphy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
-#include <linux/phy/phy.h>
-#include <linux/phy/phy-mipi-dphy.h>
+#include "../phy-provider.h"
 
 #define SUN6I_DPHY_GCTL_REG		0x00
 #define SUN6I_DPHY_GCTL_LANE_NUM(n)		((((n) - 1) & 3) << 4)
diff --git a/drivers/phy/allwinner/phy-sun9i-usb.c b/drivers/phy/allwinner/phy-sun9i-usb.c
index 2f9e60c188b8..f667f3f4b307 100644
--- a/drivers/phy/allwinner/phy-sun9i-usb.c
+++ b/drivers/phy/allwinner/phy-sun9i-usb.c
@@ -15,11 +15,12 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/usb/of.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define SUNXI_AHB_INCR16_BURST_EN	BIT(11)
 #define SUNXI_AHB_INCR8_BURST_EN	BIT(10)
 #define SUNXI_AHB_INCR4_BURST_EN	BIT(9)
diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
index c4a56b9d3289..60d17973a38f 100644
--- a/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
+++ b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
@@ -20,6 +20,8 @@
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 /* [31] soft reset for the phy.
  *		1: reset. 0: dessert the reset.
  * [30] clock lane soft reset.
diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
index c0ba2852dbb8..21e8e2a5563a 100644
--- a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
+++ b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
@@ -7,7 +7,6 @@
 #include <linux/bitfield.h>
 #include <linux/bitops.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 #include <linux/delay.h>
 #include <linux/mfd/syscon.h>
@@ -15,6 +14,8 @@
 #include <linux/platform_device.h>
 #include <dt-bindings/phy/phy.h>
 
+#include "../phy-provider.h"
+
 #define HHI_MIPI_CNTL0 0x00
 #define		HHI_MIPI_CNTL0_COMMON_BLOCK	GENMASK(31, 28)
 #define		HHI_MIPI_CNTL0_ENABLE		BIT(29)
diff --git a/drivers/phy/amlogic/phy-meson-axg-pcie.c b/drivers/phy/amlogic/phy-meson-axg-pcie.c
index 14dee73f9cb5..c4d9faf3a805 100644
--- a/drivers/phy/amlogic/phy-meson-axg-pcie.c
+++ b/drivers/phy/amlogic/phy-meson-axg-pcie.c
@@ -13,6 +13,8 @@
 #include <linux/bitfield.h>
 #include <dt-bindings/phy/phy.h>
 
+#include "../phy-provider.h"
+
 #define MESON_PCIE_REG0 0x00
 #define		MESON_PCIE_COMMON_CLK	BIT(4)
 #define		MESON_PCIE_PORT_SEL	GENMASK(3, 2)
diff --git a/drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c b/drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c
index 46e5f7e7eb6c..11626f4528dd 100644
--- a/drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c
+++ b/drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c
@@ -9,7 +9,6 @@
 #include <linux/bitfield.h>
 #include <linux/bitops.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 #include <linux/delay.h>
 #include <linux/mfd/syscon.h>
@@ -17,6 +16,8 @@
 #include <linux/platform_device.h>
 #include <dt-bindings/phy/phy.h>
 
+#include "../phy-provider.h"
+
 #define HHI_MIPI_CNTL0 0x00
 #define		HHI_MIPI_CNTL0_DIF_REF_CTL1	GENMASK(31, 16)
 #define		HHI_MIPI_CNTL0_DIF_REF_CTL0	GENMASK(15, 0)
diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb2.c b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
index 66bf0b7ef8ed..6e599b933153 100644
--- a/drivers/phy/amlogic/phy-meson-g12a-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
@@ -20,6 +20,8 @@
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 #define PHY_CTRL_R0						0x0
 #define PHY_CTRL_R1						0x4
 #define PHY_CTRL_R2						0x8
diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
index 5468831d6ab9..60e9c3c1c449 100644
--- a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
@@ -12,12 +12,13 @@
 #include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/platform_device.h>
 #include <dt-bindings/phy/phy.h>
 
+#include "../phy-provider.h"
+
 #define PHY_R0							0x00
 	#define PHY_R0_PCIE_POWER_STATE				GENMASK(4, 0)
 	#define PHY_R0_PCIE_USB3_SWITCH				GENMASK(6, 5)
diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
index 6b390304f723..b8d5b12cffc8 100644
--- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
@@ -12,9 +12,10 @@
 #include <linux/module.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 /* bits [31:27] are read-only */
 #define U2P_R0							0x0
 	#define U2P_R0_BYPASS_SEL				BIT(0)
diff --git a/drivers/phy/amlogic/phy-meson8-hdmi-tx.c b/drivers/phy/amlogic/phy-meson8-hdmi-tx.c
index 2617f7f6c2ec..2a8c93dcda7e 100644
--- a/drivers/phy/amlogic/phy-meson8-hdmi-tx.c
+++ b/drivers/phy/amlogic/phy-meson8-hdmi-tx.c
@@ -11,11 +11,12 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /*
  * Unfortunately there is no detailed documentation available for the
  * HHI_HDMI_PHY_CNTL0 register. CTL0 and CTL1 is all we know about.
diff --git a/drivers/phy/amlogic/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c
index a553231a9f7c..b288868b2d9e 100644
--- a/drivers/phy/amlogic/phy-meson8b-usb2.c
+++ b/drivers/phy/amlogic/phy-meson8b-usb2.c
@@ -14,10 +14,11 @@
 #include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/usb/of.h>
 
+#include "../phy-provider.h"
+
 #define REG_CONFIG					0x00
 	#define REG_CONFIG_CLK_EN			BIT(0)
 	#define REG_CONFIG_CLK_SEL_MASK			GENMASK(3, 1)
diff --git a/drivers/phy/apple/atc.c b/drivers/phy/apple/atc.c
index e9d106f135c5..de9453d13c0e 100644
--- a/drivers/phy/apple/atc.c
+++ b/drivers/phy/apple/atc.c
@@ -32,7 +32,6 @@
 #include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset-controller.h>
 #include <linux/soc/apple/tunable.h>
@@ -44,6 +43,8 @@
 #include <linux/usb/typec_mux.h>
 #include <linux/usb/typec_tbt.h>
 
+#include "../phy-provider.h"
+
 #define AUSPLL_FSM_CTRL 0x1014
 
 #define AUSPLL_APB_CMD_OVERRIDE 0x2000
diff --git a/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c b/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c
index 462c61a24ec5..e10274f53c10 100644
--- a/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c
+++ b/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c
@@ -5,9 +5,10 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 #define PCIE_CFG_OFFSET         0x00
 #define PCIE1_PHY_IDDQ_SHIFT    10
 #define PCIE0_PHY_IDDQ_SHIFT    2
diff --git a/drivers/phy/broadcom/phy-bcm-kona-usb2.c b/drivers/phy/broadcom/phy-bcm-kona-usb2.c
index e9cc5f2cb89a..356f42a08941 100644
--- a/drivers/phy/broadcom/phy-bcm-kona-usb2.c
+++ b/drivers/phy/broadcom/phy-bcm-kona-usb2.c
@@ -12,9 +12,11 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
+#include <linux/phy/phy.h> /* for phy_set_bus_width() */
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 #define OTGCTL			(0)
 #define OTGCTL_OTGSTAT2		BIT(31)
 #define OTGCTL_OTGSTAT1		BIT(30)
diff --git a/drivers/phy/broadcom/phy-bcm-ns-usb2.c b/drivers/phy/broadcom/phy-bcm-ns-usb2.c
index c5d35031b398..95331d08b367 100644
--- a/drivers/phy/broadcom/phy-bcm-ns-usb2.c
+++ b/drivers/phy/broadcom/phy-bcm-ns-usb2.c
@@ -13,11 +13,12 @@
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 struct bcm_ns_usb2 {
 	struct device *dev;
 	struct clk *ref_clk;
diff --git a/drivers/phy/broadcom/phy-bcm-ns-usb3.c b/drivers/phy/broadcom/phy-bcm-ns-usb3.c
index 6e56498d0644..f2aa4014f197 100644
--- a/drivers/phy/broadcom/phy-bcm-ns-usb3.c
+++ b/drivers/phy/broadcom/phy-bcm-ns-usb3.c
@@ -19,10 +19,11 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
 #include <linux/property.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 #define BCM_NS_USB3_PHY_BASE_ADDR_REG	0x1f
 #define BCM_NS_USB3_PHY_PLL30_BLOCK	0x8000
 #define BCM_NS_USB3_PHY_TX_PMD_BLOCK	0x8040
diff --git a/drivers/phy/broadcom/phy-bcm-ns2-pcie.c b/drivers/phy/broadcom/phy-bcm-ns2-pcie.c
index 67a6ae5ecba0..9c2c603426ca 100644
--- a/drivers/phy/broadcom/phy-bcm-ns2-pcie.c
+++ b/drivers/phy/broadcom/phy-bcm-ns2-pcie.c
@@ -6,7 +6,8 @@
 #include <linux/of_mdio.h>
 #include <linux/mdio.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
 
 #define BLK_ADDR_REG_OFFSET	0x1f
 #define PLL_AFE1_100MHZ_BLK	0x2100
diff --git a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
index 8473fa574529..7543211fb998 100644
--- a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
+++ b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
@@ -14,12 +14,13 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 
+#include "../phy-provider.h"
+
 #define ICFG_DRD_AFE		0x0
 #define ICFG_MISC_STAT		0x18
 #define ICFG_DRD_P0CTL		0x1C
diff --git a/drivers/phy/broadcom/phy-bcm-sr-pcie.c b/drivers/phy/broadcom/phy-bcm-sr-pcie.c
index 706e1d83b4ce..8f4e44d1dea6 100644
--- a/drivers/phy/broadcom/phy-bcm-sr-pcie.c
+++ b/drivers/phy/broadcom/phy-bcm-sr-pcie.c
@@ -9,10 +9,11 @@
 #include <linux/module.h>
 #include <linux/mfd/syscon.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /* we have up to 8 PAXB based RC. The 9th one is always PAXC */
 #define SR_NR_PCIE_PHYS               9
 #define SR_PAXC_PHY_IDX               (SR_NR_PCIE_PHYS - 1)
diff --git a/drivers/phy/broadcom/phy-bcm-sr-usb.c b/drivers/phy/broadcom/phy-bcm-sr-usb.c
index 6bcfe83609c8..4c863738bdca 100644
--- a/drivers/phy/broadcom/phy-bcm-sr-usb.c
+++ b/drivers/phy/broadcom/phy-bcm-sr-usb.c
@@ -8,9 +8,10 @@
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 enum bcm_usb_phy_version {
 	BCM_SR_USB_COMBO_PHY,
 	BCM_SR_USB_HS_PHY,
diff --git a/drivers/phy/broadcom/phy-bcm63xx-usbh.c b/drivers/phy/broadcom/phy-bcm63xx-usbh.c
index 29fd6791bae6..63099da486c6 100644
--- a/drivers/phy/broadcom/phy-bcm63xx-usbh.c
+++ b/drivers/phy/broadcom/phy-bcm63xx-usbh.c
@@ -18,10 +18,11 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 /* USBH control register offsets */
 enum usbh_regs {
 	USBH_BRT_CONTROL1 = 0,
diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c
index fb69e21a0292..ab826f9c8678 100644
--- a/drivers/phy/broadcom/phy-brcm-sata.c
+++ b/drivers/phy/broadcom/phy-brcm-sata.c
@@ -13,9 +13,10 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 #define SATA_PCB_BANK_OFFSET				0x23c
 #define SATA_PCB_REG_OFFSET(ofs)			((ofs) * 4)
 
diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c
index 59d756a10d6c..d660a0ed03ee 100644
--- a/drivers/phy/broadcom/phy-brcm-usb.c
+++ b/drivers/phy/broadcom/phy-brcm-usb.c
@@ -11,7 +11,6 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/soc/brcmstb/brcmstb.h>
@@ -19,6 +18,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/suspend.h>
 
+#include "../phy-provider.h"
 #include "phy-brcm-usb-init.h"
 
 static DEFINE_MUTEX(sysfs_lock);
diff --git a/drivers/phy/cadence/cdns-dphy-rx.c b/drivers/phy/cadence/cdns-dphy-rx.c
index 3ac80141189c..7097ac17443f 100644
--- a/drivers/phy/cadence/cdns-dphy-rx.c
+++ b/drivers/phy/cadence/cdns-dphy-rx.c
@@ -9,12 +9,13 @@
 #include <linux/iopoll.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/phy/phy-mipi-dphy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/sys_soc.h>
 
+#include "../phy-provider.h"
+
 #define DPHY_PMA_CMN(reg)		(reg)
 #define DPHY_PCS(reg)			(0xb00 + (reg))
 #define DPHY_ISO(reg)			(0xc00 + (reg))
diff --git a/drivers/phy/cadence/cdns-dphy.c b/drivers/phy/cadence/cdns-dphy.c
index d5b0e516b93c..40bc18405082 100644
--- a/drivers/phy/cadence/cdns-dphy.c
+++ b/drivers/phy/cadence/cdns-dphy.c
@@ -10,11 +10,11 @@
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/phy/phy-mipi-dphy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 
-#include <linux/phy/phy.h>
-#include <linux/phy/phy-mipi-dphy.h>
+#include "../phy-provider.h"
 
 #define REG_WAKEUP_TIME_NS		800
 #define DPHY_PLL_RATE_HZ		108000000
diff --git a/drivers/phy/cadence/phy-cadence-salvo.c b/drivers/phy/cadence/phy-cadence-salvo.c
index f461585c84c6..8ed74db50dfa 100644
--- a/drivers/phy/cadence/phy-cadence-salvo.c
+++ b/drivers/phy/cadence/phy-cadence-salvo.c
@@ -10,12 +10,13 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 
+#include "../phy-provider.h"
+
 #define USB3_PHY_OFFSET			0x0
 #define USB2_PHY_OFFSET			0x38000
 /* USB3 PHY register definition */
diff --git a/drivers/phy/cadence/phy-cadence-sierra.c b/drivers/phy/cadence/phy-cadence-sierra.c
index 92ab1a31646a..fb44b8fc5e3f 100644
--- a/drivers/phy/cadence/phy-cadence-sierra.c
+++ b/drivers/phy/cadence/phy-cadence-sierra.c
@@ -12,7 +12,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
@@ -23,6 +22,8 @@
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/phy/phy-cadence.h>
 
+#include "../phy-provider.h"
+
 #define NUM_SSC_MODE		3
 #define NUM_PHY_TYPE		5
 
diff --git a/drivers/phy/cadence/phy-cadence-torrent.c b/drivers/phy/cadence/phy-cadence-torrent.c
index d446a0f97688..974e12e34ae1 100644
--- a/drivers/phy/cadence/phy-cadence-torrent.c
+++ b/drivers/phy/cadence/phy-cadence-torrent.c
@@ -17,11 +17,12 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define REF_CLK_19_2MHZ		19200000
 #define REF_CLK_25MHZ		25000000
 #define REF_CLK_100MHZ		100000000
diff --git a/drivers/phy/canaan/phy-k230-usb.c b/drivers/phy/canaan/phy-k230-usb.c
index 52dad35fc6cf..4305763a5456 100644
--- a/drivers/phy/canaan/phy-k230-usb.c
+++ b/drivers/phy/canaan/phy-k230-usb.c
@@ -8,9 +8,10 @@
 #include <linux/bitfield.h>
 #include <linux/io.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 #define MAX_PHYS		2
 
 /* Register offsets within the HiSysConfig system controller */
diff --git a/drivers/phy/eswin/phy-eic7700-sata.c b/drivers/phy/eswin/phy-eic7700-sata.c
index c33653d48daa..387d5c8c11d9 100644
--- a/drivers/phy/eswin/phy-eic7700-sata.c
+++ b/drivers/phy/eswin/phy-eic7700-sata.c
@@ -14,11 +14,12 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define SATA_AXI_LP_CTRL			0x08
 #define SATA_MPLL_CTRL				0x20
 #define SATA_P0_PHY_STAT			0x24
diff --git a/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
index 0928a526e2ab..314aa227f753 100644
--- a/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
+++ b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
@@ -16,11 +16,12 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 
+#include "../phy-provider.h"
+
 /* Control and Status Registers(CSR) */
 #define PHY_CTRL			0x00
 #define  CCM_MASK			GENMASK(7, 5)
diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
index 7f5600103a00..6197cfc9b9a4 100644
--- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
+++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
@@ -3,6 +3,7 @@
  * Copyright 2021 NXP
  */
 
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
@@ -12,12 +13,11 @@
 #include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
-#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "../phy-provider.h"
 
 #define IMX8MM_PCIE_PHY_CMN_REG061	0x184
 #define  ANA_PLL_CLK_OUT_TO_EXT_IO_EN	BIT(0)
diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
index b05d80e849a1..9b938b446996 100644
--- a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
+++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
@@ -7,11 +7,12 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/usb/typec_mux.h>
 
+#include "../phy-provider.h"
+
 #define PHY_CTRL0			0x0
 #define PHY_CTRL0_REF_SSP_EN		BIT(2)
 #define PHY_CTRL0_FSEL_MASK		GENMASK(10, 5)
diff --git a/drivers/phy/freescale/phy-fsl-imx8qm-hsio.c b/drivers/phy/freescale/phy-fsl-imx8qm-hsio.c
index 279b8ac7822d..b274fd24b59a 100644
--- a/drivers/phy/freescale/phy-fsl-imx8qm-hsio.c
+++ b/drivers/phy/freescale/phy-fsl-imx8qm-hsio.c
@@ -3,6 +3,8 @@
  * Copyright 2024 NXP
  */
 
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
@@ -11,13 +13,11 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/pci_regs.h>
-#include <linux/phy/phy.h>
 #include <linux/phy/pcie.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
-#include <dt-bindings/phy/phy.h>
-#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "../phy-provider.h"
 
 #define MAX_NUM_LANE	3
 #define LANE_NUM_CLKS	5
diff --git a/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c b/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c
index ece357443521..55c23bef5121 100644
--- a/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c
+++ b/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c
@@ -9,12 +9,13 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/units.h>
 
+#include "../phy-provider.h"
+
 #define REG_SET		0x4
 #define REG_CLR		0x8
 
diff --git a/drivers/phy/freescale/phy-fsl-lynx-28g.c b/drivers/phy/freescale/phy-fsl-lynx-28g.c
index 2b0fd95ba62f..c4df5966ddfb 100644
--- a/drivers/phy/freescale/phy-fsl-lynx-28g.c
+++ b/drivers/phy/freescale/phy-fsl-lynx-28g.c
@@ -5,10 +5,11 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/workqueue.h>
 
+#include "../phy-provider.h"
+
 #define LYNX_28G_NUM_LANE			8
 #define LYNX_28G_NUM_PLL			2
 
diff --git a/drivers/phy/hisilicon/phy-hi3660-usb3.c b/drivers/phy/hisilicon/phy-hi3660-usb3.c
index e2a09d67faed..b66ff3be1aed 100644
--- a/drivers/phy/hisilicon/phy-hi3660-usb3.c
+++ b/drivers/phy/hisilicon/phy-hi3660-usb3.c
@@ -12,10 +12,11 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define PERI_CRG_CLK_EN4			0x40
 #define PERI_CRG_CLK_DIS4			0x44
 #define GT_CLK_USB3OTG_REF			BIT(0)
diff --git a/drivers/phy/hisilicon/phy-hi3670-pcie.c b/drivers/phy/hisilicon/phy-hi3670-pcie.c
index dbc7dcce682b..b7cf44078e0d 100644
--- a/drivers/phy/hisilicon/phy-hi3670-pcie.c
+++ b/drivers/phy/hisilicon/phy-hi3670-pcie.c
@@ -26,11 +26,12 @@
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/types.h>
 
+#include "../phy-provider.h"
+
 #define AXI_CLK_FREQ				207500000
 #define REF_CLK_FREQ				100000000
 
diff --git a/drivers/phy/hisilicon/phy-hi3670-usb3.c b/drivers/phy/hisilicon/phy-hi3670-usb3.c
index 40d3cf128b44..004c51500597 100644
--- a/drivers/phy/hisilicon/phy-hi3670-usb3.c
+++ b/drivers/phy/hisilicon/phy-hi3670-usb3.c
@@ -14,10 +14,11 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define SCTRL_SCDEEPSLEEPED		(0x0)
 #define USB_CLK_SELECTED		BIT(20)
 
diff --git a/drivers/phy/hisilicon/phy-hi6220-usb.c b/drivers/phy/hisilicon/phy-hi6220-usb.c
index 22d8d8a8dabe..1b5a2d3e3e44 100644
--- a/drivers/phy/hisilicon/phy-hi6220-usb.c
+++ b/drivers/phy/hisilicon/phy-hi6220-usb.c
@@ -8,9 +8,10 @@
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define SC_PERIPH_CTRL4			0x00c
 
 #define CTRL4_PICO_SIDDQ		BIT(6)
diff --git a/drivers/phy/hisilicon/phy-hisi-inno-usb2.c b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
index c843923252aa..4a4701d0fc9c 100644
--- a/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
+++ b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
@@ -10,10 +10,12 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
+#include <linux/phy/phy.h> /* for phy_set_bus_width() */
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define INNO_PHY_PORT_NUM	2
 #define REF_CLK_STABLE_TIME	100	/* unit:us */
 #define UTMI_CLK_STABLE_TIME	200	/* unit:us */
diff --git a/drivers/phy/hisilicon/phy-histb-combphy.c b/drivers/phy/hisilicon/phy-histb-combphy.c
index 9dd0bd00b4e4..9b6ed1644d74 100644
--- a/drivers/phy/hisilicon/phy-histb-combphy.c
+++ b/drivers/phy/hisilicon/phy-histb-combphy.c
@@ -14,12 +14,13 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <dt-bindings/phy/phy.h>
 
+#include "../phy-provider.h"
+
 #define COMBPHY_MODE_PCIE		0
 #define COMBPHY_MODE_USB3		1
 #define COMBPHY_MODE_SATA		2
diff --git a/drivers/phy/hisilicon/phy-hix5hd2-sata.c b/drivers/phy/hisilicon/phy-hix5hd2-sata.c
index 1b26ddb4c8a7..57994f69417d 100644
--- a/drivers/phy/hisilicon/phy-hix5hd2-sata.c
+++ b/drivers/phy/hisilicon/phy-hix5hd2-sata.c
@@ -9,10 +9,11 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define SATA_PHY0_CTLL		0xa0
 #define MPLL_MULTIPLIER_SHIFT	1
 #define MPLL_MULTIPLIER_MASK	0xfe
diff --git a/drivers/phy/ingenic/phy-ingenic-usb.c b/drivers/phy/ingenic/phy-ingenic-usb.c
index 7e62d46850fd..d656f97729c4 100644
--- a/drivers/phy/ingenic/phy-ingenic-usb.c
+++ b/drivers/phy/ingenic/phy-ingenic-usb.c
@@ -12,10 +12,11 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 
+#include "../phy-provider.h"
+
 /* OTGPHY register offsets */
 #define REG_USBPCR_OFFSET			0x00
 #define REG_USBRDT_OFFSET			0x04
diff --git a/drivers/phy/intel/phy-intel-keembay-emmc.c b/drivers/phy/intel/phy-intel-keembay-emmc.c
index 0eb11ac7c2e2..fdba1d050439 100644
--- a/drivers/phy/intel/phy-intel-keembay-emmc.c
+++ b/drivers/phy/intel/phy-intel-keembay-emmc.c
@@ -11,10 +11,11 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /* eMMC/SD/SDIO core/phy configuration registers */
 #define PHY_CFG_0		0x24
 #define  SEL_DLY_TXCLK_MASK	BIT(29)
diff --git a/drivers/phy/intel/phy-intel-keembay-usb.c b/drivers/phy/intel/phy-intel-keembay-usb.c
index c8b05f7b2445..4e690f3eb560 100644
--- a/drivers/phy/intel/phy-intel-keembay-usb.c
+++ b/drivers/phy/intel/phy-intel-keembay-usb.c
@@ -10,10 +10,11 @@
 #include <linux/delay.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /* USS (USB Subsystem) clock control registers */
 #define USS_CPR_CLK_EN		0x00
 #define USS_CPR_CLK_SET		0x04
diff --git a/drivers/phy/intel/phy-intel-lgm-combo.c b/drivers/phy/intel/phy-intel-lgm-combo.c
index 9ee3cf61cdd0..2a8b0caa0e59 100644
--- a/drivers/phy/intel/phy-intel-lgm-combo.c
+++ b/drivers/phy/intel/phy-intel-lgm-combo.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2019-2020 Intel Corporation.
  */
 
+#include <dt-bindings/phy/phy.h>
 #include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/iopoll.h>
@@ -12,12 +13,11 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
-#include <dt-bindings/phy/phy.h>
+#include "../phy-provider.h"
 
 #define PCIE_PHY_GEN_CTRL	0x00
 #define PCIE_PHY_CLK_PAD	BIT(17)
diff --git a/drivers/phy/intel/phy-intel-lgm-emmc.c b/drivers/phy/intel/phy-intel-lgm-emmc.c
index 703aeb122541..479a530dd630 100644
--- a/drivers/phy/intel/phy-intel-lgm-emmc.c
+++ b/drivers/phy/intel/phy-intel-lgm-emmc.c
@@ -11,10 +11,11 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /* eMMC phy register definitions */
 #define EMMC_PHYCTRL0_REG	0xa8
 #define DR_TY_MASK		GENMASK(30, 28)
diff --git a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
index 82f1ffc0b0ad..eb6c201f7c87 100644
--- a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
+++ b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
@@ -12,12 +12,13 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 /* Transmitter HS Pre-Emphasis Enable */
 #define RCU_CFG1_TX_PEE		BIT(0)
 /* Disconnect Threshold */
diff --git a/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c b/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c
index 406a87c8b759..70da76399e30 100644
--- a/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c
+++ b/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c
@@ -11,6 +11,7 @@
  * TODO: PHY modes other than 36MHz (without "SSC")
  */
 
+#include <dt-bindings/phy/phy-lantiq-vrx200-pcie.h>
 #include <linux/bitfield.h>
 #include <linux/bits.h>
 #include <linux/clk.h>
@@ -18,13 +19,12 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
-#include <dt-bindings/phy/phy-lantiq-vrx200-pcie.h>
+#include "../phy-provider.h"
 
 #define PCIE_PHY_PLL_CTRL1				0x44
 
diff --git a/drivers/phy/marvell/phy-armada375-usb2.c b/drivers/phy/marvell/phy-armada375-usb2.c
index 3731f9b25655..d5c100096c3d 100644
--- a/drivers/phy/marvell/phy-armada375-usb2.c
+++ b/drivers/phy/marvell/phy-armada375-usb2.c
@@ -16,9 +16,10 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 #define USB2_PHY_CONFIG_DISABLE BIT(0)
 
 struct armada375_cluster_phy {
diff --git a/drivers/phy/marvell/phy-armada38x-comphy.c b/drivers/phy/marvell/phy-armada38x-comphy.c
index 5063361b0120..9653863f90bb 100644
--- a/drivers/phy/marvell/phy-armada38x-comphy.c
+++ b/drivers/phy/marvell/phy-armada38x-comphy.c
@@ -9,10 +9,11 @@
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 #define MAX_A38X_COMPHY	6
 #define MAX_A38X_PORTS	3
 
diff --git a/drivers/phy/marvell/phy-berlin-sata.c b/drivers/phy/marvell/phy-berlin-sata.c
index c90e2867900c..4d4013d115ca 100644
--- a/drivers/phy/marvell/phy-berlin-sata.c
+++ b/drivers/phy/marvell/phy-berlin-sata.c
@@ -10,10 +10,11 @@
 #include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 #define HOST_VSA_ADDR		0x0
 #define HOST_VSA_DATA		0x4
 #define PORT_SCR_CTL		0x2c
diff --git a/drivers/phy/marvell/phy-berlin-usb.c b/drivers/phy/marvell/phy-berlin-usb.c
index f26bf630da2c..a3e58deaaa74 100644
--- a/drivers/phy/marvell/phy-berlin-usb.c
+++ b/drivers/phy/marvell/phy-berlin-usb.c
@@ -9,11 +9,12 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define USB_PHY_PLL		0x04
 #define USB_PHY_PLL_CONTROL	0x08
 #define USB_PHY_TX_CTRL0	0x10
diff --git a/drivers/phy/marvell/phy-mmp3-hsic.c b/drivers/phy/marvell/phy-mmp3-hsic.c
index 72ab6da0ebc3..90498211431b 100644
--- a/drivers/phy/marvell/phy-mmp3-hsic.c
+++ b/drivers/phy/marvell/phy-mmp3-hsic.c
@@ -7,9 +7,10 @@
 #include <linux/io.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 #define HSIC_CTRL	0x08
 #define HSIC_ENABLE	BIT(7)
 #define PLL_BYPASS	BIT(4)
diff --git a/drivers/phy/marvell/phy-mmp3-usb.c b/drivers/phy/marvell/phy-mmp3-usb.c
index 5b71deb08851..ba67bcc2c3f9 100644
--- a/drivers/phy/marvell/phy-mmp3-usb.c
+++ b/drivers/phy/marvell/phy-mmp3-usb.c
@@ -8,10 +8,11 @@
 #include <linux/io.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/soc/mmp/cputype.h>
 
+#include "../phy-provider.h"
+
 #define USB2_PLL_REG0		0x4
 #define USB2_PLL_REG1		0x8
 #define USB2_TX_REG0		0x10
diff --git a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
index 1d1db1737422..3acfd74c3eca 100644
--- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
@@ -21,10 +21,11 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 
+#include "../phy-provider.h"
+
 #define PLL_SET_DELAY_US		600
 #define COMPHY_PLL_SLEEP		1000
 #define COMPHY_PLL_TIMEOUT		150000
diff --git a/drivers/phy/marvell/phy-mvebu-a3700-utmi.c b/drivers/phy/marvell/phy-mvebu-a3700-utmi.c
index 04f4fb4bed70..c17ce28ceb0b 100644
--- a/drivers/phy/marvell/phy-mvebu-a3700-utmi.c
+++ b/drivers/phy/marvell/phy-mvebu-a3700-utmi.c
@@ -14,10 +14,11 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /* Armada 3700 UTMI PHY registers */
 #define USB2_PHY_PLL_CTRL_REG0			0x0
 #define   PLL_REF_DIV_OFF			0
diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
index 71f9c14fb50d..18ad172135ea 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
@@ -13,10 +13,11 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /* Relative to priv->base */
 #define MVEBU_COMPHY_SERDES_CFG0(n)		(0x0 + (n) * 0x1000)
 #define     MVEBU_COMPHY_SERDES_CFG0_PU_PLL	BIT(1)
diff --git a/drivers/phy/marvell/phy-mvebu-cp110-utmi.c b/drivers/phy/marvell/phy-mvebu-cp110-utmi.c
index dd3e515a8e86..f3e2ef54c37b 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-utmi.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-utmi.c
@@ -13,12 +13,13 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/usb/of.h>
 #include <linux/usb/otg.h>
 
+#include "../phy-provider.h"
+
 #define UTMI_PHY_PORTS				2
 
 /* CP110 UTMI register macro definetions */
diff --git a/drivers/phy/marvell/phy-mvebu-sata.c b/drivers/phy/marvell/phy-mvebu-sata.c
index 89a5a2b69d80..b9a9eca74789 100644
--- a/drivers/phy/marvell/phy-mvebu-sata.c
+++ b/drivers/phy/marvell/phy-mvebu-sata.c
@@ -8,11 +8,12 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
-#include <linux/phy/phy.h>
 #include <linux/io.h>
 #include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 struct priv {
 	struct clk	*clk;
 	void __iomem	*base;
diff --git a/drivers/phy/marvell/phy-pxa-28nm-hsic.c b/drivers/phy/marvell/phy-pxa-28nm-hsic.c
index eff6dd6b2dd0..6feee8d1ca70 100644
--- a/drivers/phy/marvell/phy-pxa-28nm-hsic.c
+++ b/drivers/phy/marvell/phy-pxa-28nm-hsic.c
@@ -17,7 +17,8 @@
 #include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
 
 #define PHY_28NM_HSIC_CTRL			0x08
 #define PHY_28NM_HSIC_IMPCAL_CAL		0x18
diff --git a/drivers/phy/marvell/phy-pxa-28nm-usb2.c b/drivers/phy/marvell/phy-pxa-28nm-usb2.c
index 64afb82cf70e..39b8344803cb 100644
--- a/drivers/phy/marvell/phy-pxa-28nm-usb2.c
+++ b/drivers/phy/marvell/phy-pxa-28nm-usb2.c
@@ -17,7 +17,8 @@
 #include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
 
 /* USB PXA1928 PHY mapping */
 #define PHY_28NM_PLL_REG0			0x0
diff --git a/drivers/phy/marvell/phy-pxa-usb.c b/drivers/phy/marvell/phy-pxa-usb.c
index c0bb71f80c04..9a8ab813d001 100644
--- a/drivers/phy/marvell/phy-pxa-usb.c
+++ b/drivers/phy/marvell/phy-pxa-usb.c
@@ -10,9 +10,10 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 /* phy regs */
 #define UTMI_REVISION		0x0
 #define UTMI_CTRL		0x4
diff --git a/drivers/phy/mediatek/phy-mtk-dp.c b/drivers/phy/mediatek/phy-mtk-dp.c
index d7024a144335..ab3778447570 100644
--- a/drivers/phy/mediatek/phy-mtk-dp.c
+++ b/drivers/phy/mediatek/phy-mtk-dp.c
@@ -10,10 +10,11 @@
 #include <linux/io.h>
 #include <linux/mfd/syscon.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define PHY_OFFSET			0x1000
 
 #define MTK_DP_PHY_DIG_PLL_CTL_1	(PHY_OFFSET + 0x14)
diff --git a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
index 1426a2db984d..30015bac3f73 100644
--- a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
+++ b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
@@ -7,7 +7,6 @@
 #include <linux/io.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/of_regulator.h>
diff --git a/drivers/phy/mediatek/phy-mtk-hdmi.h b/drivers/phy/mediatek/phy-mtk-hdmi.h
index 99d917e0036a..bfddd8dbe9dd 100644
--- a/drivers/phy/mediatek/phy-mtk-hdmi.h
+++ b/drivers/phy/mediatek/phy-mtk-hdmi.h
@@ -11,12 +11,13 @@
 #include <linux/delay.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/types.h>
 
+#include "../phy-provider.h"
+
 struct mtk_hdmi_phy;
 
 struct mtk_hdmi_phy_conf {
diff --git a/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c b/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c
index 058e1d926630..5e008204ecca 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c
+++ b/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c
@@ -12,10 +12,10 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
 #include "phy-mtk-io.h"
 #include "phy-mtk-mipi-csi-0-5-rx-reg.h"
 
diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi.h b/drivers/phy/mediatek/phy-mtk-mipi-dsi.h
index 5d4876f1dc95..676c8f78d9d6 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-dsi.h
+++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi.h
@@ -13,9 +13,10 @@
 #include <linux/module.h>
 #include <linux/nvmem-consumer.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 struct mtk_mipitx_data {
 	const u32 mppll_preserve;
 	const struct clk_ops *mipi_tx_clk_ops;
diff --git a/drivers/phy/mediatek/phy-mtk-pcie.c b/drivers/phy/mediatek/phy-mtk-pcie.c
index a2f69d6c72f0..1ab7c1dc2753 100644
--- a/drivers/phy/mediatek/phy-mtk-pcie.c
+++ b/drivers/phy/mediatek/phy-mtk-pcie.c
@@ -8,10 +8,10 @@
 #include <linux/module.h>
 #include <linux/nvmem-consumer.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
 #include "phy-mtk-io.h"
 
 #define PEXTP_ANA_GLB_00_REG		0x9000
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index acf506529507..6f98de067327 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -15,10 +15,10 @@
 #include <linux/nvmem-consumer.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
 #include "phy-mtk-io.h"
 
 /* version V1 sub-banks offset base address */
diff --git a/drivers/phy/mediatek/phy-mtk-ufs.c b/drivers/phy/mediatek/phy-mtk-ufs.c
index 0cb5a25b1b7a..de517fcc4f3e 100644
--- a/drivers/phy/mediatek/phy-mtk-ufs.c
+++ b/drivers/phy/mediatek/phy-mtk-ufs.c
@@ -9,9 +9,9 @@
 #include <linux/io.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
 #include "phy-mtk-io.h"
 
 /* mphy register and offsets */
diff --git a/drivers/phy/mediatek/phy-mtk-xfi-tphy.c b/drivers/phy/mediatek/phy-mtk-xfi-tphy.c
index 100a50d0e861..036a4bb58dcf 100644
--- a/drivers/phy/mediatek/phy-mtk-xfi-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-xfi-tphy.c
@@ -17,8 +17,8 @@
 #include <linux/clk.h>
 #include <linux/reset.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
 
+#include "../phy-provider.h"
 #include "phy-mtk-io.h"
 
 #define MTK_XFI_TPHY_NUM_CLOCKS		2
diff --git a/drivers/phy/mediatek/phy-mtk-xsphy.c b/drivers/phy/mediatek/phy-mtk-xsphy.c
index c0ddb9273cc3..5e61abddaf54 100644
--- a/drivers/phy/mediatek/phy-mtk-xsphy.c
+++ b/drivers/phy/mediatek/phy-mtk-xsphy.c
@@ -14,10 +14,10 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
 #include "phy-mtk-io.h"
 
 /* u2 phy banks */
diff --git a/drivers/phy/microchip/lan966x_serdes.c b/drivers/phy/microchip/lan966x_serdes.c
index 835e369cdfc5..8769518f9708 100644
--- a/drivers/phy/microchip/lan966x_serdes.c
+++ b/drivers/phy/microchip/lan966x_serdes.c
@@ -1,15 +1,15 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 
+#include <dt-bindings/phy/phy-lan966x-serdes.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
-#include <dt-bindings/phy/phy-lan966x-serdes.h>
 #include "lan966x_serdes_regs.h"
+#include "../phy-provider.h"
 
 #define PLL_CONF_MASK		GENMASK(4, 3)
 #define PLL_CONF_25MHZ		0
diff --git a/drivers/phy/microchip/sparx5_serdes.c b/drivers/phy/microchip/sparx5_serdes.c
index 320cf5b50a8c..09c22a6a2639 100644
--- a/drivers/phy/microchip/sparx5_serdes.c
+++ b/drivers/phy/microchip/sparx5_serdes.c
@@ -17,8 +17,8 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
 
+#include "../phy-provider.h"
 #include "sparx5_serdes.h"
 
 #define SPX5_SERDES_10G_START 13
diff --git a/drivers/phy/motorola/phy-cpcap-usb.c b/drivers/phy/motorola/phy-cpcap-usb.c
index 7cb020dd3423..66a834c208fc 100644
--- a/drivers/phy/motorola/phy-cpcap-usb.c
+++ b/drivers/phy/motorola/phy-cpcap-usb.c
@@ -24,10 +24,11 @@
 #include <linux/gpio/consumer.h>
 #include <linux/mfd/motorola-cpcap.h>
 #include <linux/phy/omap_usb.h>
-#include <linux/phy/phy.h>
 #include <linux/regulator/consumer.h>
 #include <linux/usb/musb.h>
 
+#include "../phy-provider.h"
+
 /* CPCAP_REG_USBC1 register bits */
 #define CPCAP_BIT_IDPULSE		BIT(15)
 #define CPCAP_BIT_ID100KPU		BIT(14)
diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c
index ce1dad8c438d..92f63e52bd1d 100644
--- a/drivers/phy/motorola/phy-mapphone-mdm6600.c
+++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c
@@ -15,10 +15,12 @@
 
 #include <linux/gpio/consumer.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
+#include <linux/phy/phy.h> /* for phy_pm_runtime_*() */
 #include <linux/pinctrl/consumer.h>
 #include <linux/pm_runtime.h>
 
+#include "../phy-provider.h"
+
 #define PHY_MDM6600_PHY_DELAY_MS	4000	/* PHY enable 2.2s to 3.5s */
 #define PHY_MDM6600_ENABLED_DELAY_MS	8000	/* 8s more total for MDM6600 */
 #define PHY_MDM6600_WAKE_KICK_MS	600	/* time on after GPIO toggle */
diff --git a/drivers/phy/mscc/phy-ocelot-serdes.c b/drivers/phy/mscc/phy-ocelot-serdes.c
index 1cd1b5db2ad7..13f83876d954 100644
--- a/drivers/phy/mscc/phy-ocelot-serdes.c
+++ b/drivers/phy/mscc/phy-ocelot-serdes.c
@@ -12,12 +12,13 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <soc/mscc/ocelot_hsio.h>
 #include <dt-bindings/phy/phy-ocelot-serdes.h>
 
+#include "../phy-provider.h"
+
 struct serdes_ctrl {
 	struct regmap		*regs;
 	struct device		*dev;
diff --git a/drivers/phy/nuvoton/phy-ma35d1-usb2.c b/drivers/phy/nuvoton/phy-ma35d1-usb2.c
index 9a459b700ed4..520c86188fe2 100644
--- a/drivers/phy/nuvoton/phy-ma35d1-usb2.c
+++ b/drivers/phy/nuvoton/phy-ma35d1-usb2.c
@@ -10,10 +10,11 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /* USB PHY Miscellaneous Control Register */
 #define MA35_SYS_REG_USBPMISCR	0x60
 #define PHY0POR			BIT(0)  /* PHY Power-On Reset Control Bit */
diff --git a/drivers/phy/phy-airoha-pcie.c b/drivers/phy/phy-airoha-pcie.c
index 56e9ade8a9fd..d9817eed2631 100644
--- a/drivers/phy/phy-airoha-pcie.c
+++ b/drivers/phy/phy-airoha-pcie.c
@@ -9,11 +9,11 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
 #include "phy-airoha-pcie-regs.h"
+#include "phy-provider.h"
 
 #define LEQ_LEN_CTRL_MAX_VAL	7
 #define FREQ_LOCK_MAX_ATTEMPT	10
diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
index 330356706ad7..d1e90fe6b68b 100644
--- a/drivers/phy/phy-can-transceiver.c
+++ b/drivers/phy/phy-can-transceiver.c
@@ -6,13 +6,14 @@
  *
  */
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/mux/consumer.h>
 
+#include "phy-provider.h"
+
 struct can_transceiver_data {
 	u32 flags;
 #define CAN_TRANSCEIVER_STB_PRESENT	BIT(0)
diff --git a/drivers/phy/phy-core-mipi-dphy.c b/drivers/phy/phy-core-mipi-dphy.c
index f4956a417a47..770cfe2a2279 100644
--- a/drivers/phy/phy-core-mipi-dphy.c
+++ b/drivers/phy/phy-core-mipi-dphy.c
@@ -4,13 +4,13 @@
  * Copyright (C) 2018 Cadence Design Systems Inc.
  */
 
+#include <linux/phy/phy-mipi-dphy.h>
 #include <linux/errno.h>
 #include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/time64.h>
 
-#include <linux/phy/phy.h>
-#include <linux/phy/phy-mipi-dphy.h>
+#include "phy-provider.h"
 
 /*
  * Minimum D-PHY timings based on MIPI D-PHY specification. Derived
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index 737a760d97d1..02af89ee64a3 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -20,6 +20,8 @@
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 
+#include "phy-provider.h"
+
 #define	to_phy(a)	(container_of((a), struct phy, dev))
 
 /**
diff --git a/drivers/phy/phy-google-usb.c b/drivers/phy/phy-google-usb.c
index 48cfa2e28347..539732f4869e 100644
--- a/drivers/phy/phy-google-usb.c
+++ b/drivers/phy/phy-google-usb.c
@@ -14,13 +14,14 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/usb/typec_mux.h>
 
+#include "phy-provider.h"
+
 #define USBCS_USB2PHY_CFG19_OFFSET 0x0
 #define USBCS_USB2PHY_CFG19_PHY_CFG_PLL_FB_DIV GENMASK(19, 8)
 
diff --git a/drivers/phy/phy-lpc18xx-usb-otg.c b/drivers/phy/phy-lpc18xx-usb-otg.c
index f905d3c64584..554dfa55fe7e 100644
--- a/drivers/phy/phy-lpc18xx-usb-otg.c
+++ b/drivers/phy/phy-lpc18xx-usb-otg.c
@@ -10,10 +10,11 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "phy-provider.h"
+
 /* USB OTG PHY register offset and bit in CREG */
 #define LPC18XX_CREG_CREG0		0x004
 #define LPC18XX_CREG_CREG0_USB0PHY	BIT(5)
diff --git a/drivers/phy/phy-nxp-ptn3222.c b/drivers/phy/phy-nxp-ptn3222.c
index c6179d8701e6..ae75b760a30d 100644
--- a/drivers/phy/phy-nxp-ptn3222.c
+++ b/drivers/phy/phy-nxp-ptn3222.c
@@ -7,10 +7,11 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 
+#include "phy-provider.h"
+
 #define NUM_SUPPLIES 2
 
 struct ptn3222 {
diff --git a/drivers/phy/phy-pistachio-usb.c b/drivers/phy/phy-pistachio-usb.c
index 231792f48ced..8eed6f505a31 100644
--- a/drivers/phy/phy-pistachio-usb.c
+++ b/drivers/phy/phy-pistachio-usb.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2015 Google, Inc.
  */
 
+#include <dt-bindings/phy/phy-pistachio-usb.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/io.h>
@@ -12,11 +13,10 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
-#include <dt-bindings/phy/phy-pistachio-usb.h>
+#include "phy-provider.h"
 
 #define USB_PHY_CONTROL1				0x04
 #define USB_PHY_CONTROL1_FSEL_SHIFT			2
diff --git a/drivers/phy/phy-snps-eusb2.c b/drivers/phy/phy-snps-eusb2.c
index f90bf7e95463..9062737bfad4 100644
--- a/drivers/phy/phy-snps-eusb2.c
+++ b/drivers/phy/phy-snps-eusb2.c
@@ -13,6 +13,8 @@
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 
+#include "phy-provider.h"
+
 #define EXYNOS_USB_PHY_HS_PHY_CTRL_RST	(0x0)
 #define USB_PHY_RST_MASK		GENMASK(1, 0)
 #define UTMI_PORT_RST_MASK		GENMASK(5, 4)
diff --git a/drivers/phy/phy-xgene.c b/drivers/phy/phy-xgene.c
index 5007dc7a357c..90a00498ec0a 100644
--- a/drivers/phy/phy-xgene.c
+++ b/drivers/phy/phy-xgene.c
@@ -43,9 +43,10 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/delay.h>
-#include <linux/phy/phy.h>
 #include <linux/clk.h>
 
+#include "phy-provider.h"
+
 /* Max 2 lanes per a PHY unit */
 #define MAX_LANE			2
 
-- 
2.43.0

[PATCH v2 phy-next 22/24] phy: include PHY provider header (2/2)

[vladimir.oltean]

The majority of PHY drivers are PHY providers (obviously).

Some are chained PHY provider+consumer (phy-qcom-m31-eusb2.c,
phy-exynos5-usbdrd.c).

Others include <linux/phy/phy.h> because they call consumer functions
such as phy_pm_runtime_get() - phy-mapphone-mdm6600.c. See commit
2ad2af081622 ("phy: mapphone-mdm6600: Improve phy related runtime PM
calls") for the story behind that. My understanding is it's a pragmatic
shortcut, but it doesn't bother much.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> #phy/qualcomm
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
---
v1->v2: split in two parts to pass through linux-phy mailing list
moderation. The split is at letter 'q' (Qualcomm)
---
 drivers/phy/qualcomm/phy-ath79-usb.c               | 3 ++-
 drivers/phy/qualcomm/phy-qcom-apq8064-sata.c       | 3 ++-
 drivers/phy/qualcomm/phy-qcom-edp.c                | 3 ++-
 drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c     | 3 ++-
 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c        | 3 ++-
 drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c       | 3 ++-
 drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c        | 3 ++-
 drivers/phy/qualcomm/phy-qcom-m31-eusb2.c          | 2 ++
 drivers/phy/qualcomm/phy-qcom-m31.c                | 3 ++-
 drivers/phy/qualcomm/phy-qcom-pcie2.c              | 3 ++-
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c          | 3 ++-
 drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c   | 3 ++-
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c           | 3 ++-
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c            | 3 ++-
 drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c     | 3 ++-
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c            | 3 ++-
 drivers/phy/qualcomm/phy-qcom-qmp-usbc.c           | 3 ++-
 drivers/phy/qualcomm/phy-qcom-qusb2.c              | 4 ++--
 drivers/phy/qualcomm/phy-qcom-sgmii-eth.c          | 3 ++-
 drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c      | 3 ++-
 drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c   | 3 ++-
 drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c        | 3 ++-
 drivers/phy/qualcomm/phy-qcom-usb-hs.c             | 3 ++-
 drivers/phy/qualcomm/phy-qcom-usb-hsic.c           | 3 ++-
 drivers/phy/qualcomm/phy-qcom-usb-ss.c             | 3 ++-
 drivers/phy/ralink/phy-mt7621-pci.c                | 3 ++-
 drivers/phy/ralink/phy-ralink-usb.c                | 3 ++-
 drivers/phy/realtek/phy-rtk-usb2.c                 | 3 ++-
 drivers/phy/realtek/phy-rtk-usb3.c                 | 3 ++-
 drivers/phy/renesas/phy-rcar-gen2.c                | 3 ++-
 drivers/phy/renesas/phy-rcar-gen3-pcie.c           | 3 ++-
 drivers/phy/renesas/phy-rcar-gen3-usb2.c           | 3 ++-
 drivers/phy/renesas/phy-rcar-gen3-usb3.c           | 3 ++-
 drivers/phy/renesas/phy-rzg3e-usb3.c               | 3 ++-
 drivers/phy/renesas/r8a779f0-ether-serdes.c        | 3 ++-
 drivers/phy/rockchip/phy-rockchip-dp.c             | 3 ++-
 drivers/phy/rockchip/phy-rockchip-dphy-rx0.c       | 3 ++-
 drivers/phy/rockchip/phy-rockchip-emmc.c           | 3 ++-
 drivers/phy/rockchip/phy-rockchip-inno-csidphy.c   | 3 ++-
 drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c   | 4 ++--
 drivers/phy/rockchip/phy-rockchip-inno-hdmi.c      | 2 ++
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c      | 3 ++-
 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c | 3 ++-
 drivers/phy/rockchip/phy-rockchip-pcie.c           | 2 +-
 drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c  | 3 ++-
 drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c  | 2 ++
 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c     | 3 ++-
 drivers/phy/rockchip/phy-rockchip-typec.c          | 4 ++--
 drivers/phy/rockchip/phy-rockchip-usb.c            | 3 ++-
 drivers/phy/rockchip/phy-rockchip-usbdp.c          | 2 ++
 drivers/phy/samsung/phy-exynos-dp-video.c          | 3 ++-
 drivers/phy/samsung/phy-exynos-mipi-video.c        | 3 ++-
 drivers/phy/samsung/phy-exynos-pcie.c              | 3 ++-
 drivers/phy/samsung/phy-exynos4210-usb2.c          | 3 ++-
 drivers/phy/samsung/phy-exynos4x12-usb2.c          | 3 ++-
 drivers/phy/samsung/phy-exynos5-usbdrd.c           | 2 ++
 drivers/phy/samsung/phy-exynos5250-sata.c          | 3 ++-
 drivers/phy/samsung/phy-exynos5250-usb2.c          | 3 ++-
 drivers/phy/samsung/phy-s5pv210-usb2.c             | 3 ++-
 drivers/phy/samsung/phy-samsung-ufs.c              | 2 +-
 drivers/phy/samsung/phy-samsung-ufs.h              | 3 ++-
 drivers/phy/samsung/phy-samsung-usb2.c             | 2 ++
 drivers/phy/samsung/phy-samsung-usb2.h             | 3 ++-
 drivers/phy/socionext/phy-uniphier-ahci.c          | 3 ++-
 drivers/phy/socionext/phy-uniphier-pcie.c          | 3 ++-
 drivers/phy/socionext/phy-uniphier-usb2.c          | 3 ++-
 drivers/phy/socionext/phy-uniphier-usb3hs.c        | 3 ++-
 drivers/phy/socionext/phy-uniphier-usb3ss.c        | 3 ++-
 drivers/phy/sophgo/phy-cv1800-usb2.c               | 3 ++-
 drivers/phy/spacemit/phy-k1-pcie.c                 | 4 ++--
 drivers/phy/spacemit/phy-k1-usb2.c                 | 3 ++-
 drivers/phy/st/phy-miphy28lp.c                     | 4 ++--
 drivers/phy/st/phy-spear1310-miphy.c               | 3 ++-
 drivers/phy/st/phy-spear1340-miphy.c               | 3 ++-
 drivers/phy/st/phy-stih407-usb.c                   | 3 ++-
 drivers/phy/st/phy-stm32-combophy.c                | 3 ++-
 drivers/phy/st/phy-stm32-usbphyc.c                 | 2 ++
 drivers/phy/starfive/phy-jh7110-dphy-rx.c          | 3 ++-
 drivers/phy/starfive/phy-jh7110-dphy-tx.c          | 3 ++-
 drivers/phy/starfive/phy-jh7110-pcie.c             | 3 ++-
 drivers/phy/starfive/phy-jh7110-usb.c              | 3 ++-
 drivers/phy/sunplus/phy-sunplus-usb2.c             | 3 ++-
 drivers/phy/tegra/phy-tegra194-p2u.c               | 3 ++-
 drivers/phy/tegra/xusb-tegra124.c                  | 2 +-
 drivers/phy/tegra/xusb-tegra186.c                  | 2 +-
 drivers/phy/tegra/xusb-tegra210.c                  | 2 +-
 drivers/phy/tegra/xusb.c                           | 2 +-
 drivers/phy/ti/phy-am654-serdes.c                  | 3 ++-
 drivers/phy/ti/phy-da8xx-usb.c                     | 3 ++-
 drivers/phy/ti/phy-dm816x-usb.c                    | 3 ++-
 drivers/phy/ti/phy-gmii-sel.c                      | 3 ++-
 drivers/phy/ti/phy-omap-usb2.c                     | 3 ++-
 drivers/phy/ti/phy-ti-pipe3.c                      | 3 ++-
 drivers/phy/ti/phy-twl4030-usb.c                   | 3 ++-
 drivers/phy/xilinx/phy-zynqmp.c                    | 4 ++--
 include/linux/phy/phy-sun4i-usb.h                  | 2 +-
 include/linux/phy/ulpi_phy.h                       | 2 +-
 97 files changed, 186 insertions(+), 96 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-ath79-usb.c b/drivers/phy/qualcomm/phy-ath79-usb.c
index f8d0199c6e78..2f07241be600 100644
--- a/drivers/phy/qualcomm/phy-ath79-usb.c
+++ b/drivers/phy/qualcomm/phy-ath79-usb.c
@@ -8,9 +8,10 @@
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 struct ath79_usb_phy {
 	struct reset_control *reset;
 	/* The suspend override logic is inverted, hence the no prefix
diff --git a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
index cae290a6e19f..dd73ecbb6c1e 100644
--- a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
+++ b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
@@ -13,7 +13,8 @@
 #include <linux/clk.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
 
 /* PHY registers */
 #define UNIPHY_PLL_REFCLK_CFG		0x000
diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index 7372de05a0b8..faddba0f20c7 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/phy/phy-dp.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
@@ -22,6 +21,8 @@
 
 #include <dt-bindings/phy/phy.h>
 
+#include "../phy-provider.h"
+
 #include "phy-qcom-qmp-dp-phy.h"
 #include "phy-qcom-qmp-qserdes-com-v4.h"
 #include "phy-qcom-qmp-qserdes-com-v6.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
index efeec4709a15..5783bdabc287 100644
--- a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
+++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
@@ -8,7 +8,8 @@
 #include <linux/regulator/consumer.h>
 #include <linux/regmap.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
 
 /* eUSB2 status registers */
 #define EUSB2_RPTR_STATUS		0x08
diff --git a/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
index da6f290af722..f1c1c2969e37 100644
--- a/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
@@ -14,10 +14,11 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 struct ipq4019_usb_phy {
 	struct device		*dev;
 	struct phy		*phy;
diff --git a/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c b/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
index f5eb0bdac418..1a9d4dae6a33 100644
--- a/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
+++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
@@ -13,7 +13,8 @@
 #include <linux/clk.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
+
+#include "phy-provider.h"
 
 struct qcom_ipq806x_sata_phy {
 	void __iomem *mmio;
diff --git a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
index f22c0000479f..54144f0547f0 100644
--- a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
@@ -5,13 +5,14 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/regmap.h>
 #include <linux/mfd/syscon.h>
 #include <linux/bitfield.h>
 
+#include "../phy-provider.h"
+
 /* USB QSCRATCH Hardware registers */
 #define QSCRATCH_GENERAL_CFG		(0x08)
 #define HSUSB_PHY_CTRL_REG		(0x10)
diff --git a/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c b/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c
index 68f1ba8fec4a..9e3a911023cd 100644
--- a/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c
@@ -18,6 +18,8 @@
 
 #include <linux/regulator/consumer.h>
 
+#include "../phy-provider.h"
+
 #define USB_PHY_UTMI_CTRL0		(0x3c)
 #define SLEEPM				BIT(0)
 
diff --git a/drivers/phy/qualcomm/phy-qcom-m31.c b/drivers/phy/qualcomm/phy-qcom-m31.c
index 168ea980fda0..1a63a5807d37 100644
--- a/drivers/phy/qualcomm/phy-qcom-m31.c
+++ b/drivers/phy/qualcomm/phy-qcom-m31.c
@@ -10,11 +10,12 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 #define USB2PHY_PORT_UTMI_CTRL1		0x40
 
 #define USB2PHY_PORT_UTMI_CTRL2		0x44
diff --git a/drivers/phy/qualcomm/phy-qcom-pcie2.c b/drivers/phy/qualcomm/phy-qcom-pcie2.c
index 11a2bb958681..4c74d8e7722d 100644
--- a/drivers/phy/qualcomm/phy-qcom-pcie2.c
+++ b/drivers/phy/qualcomm/phy-qcom-pcie2.c
@@ -8,11 +8,12 @@
 #include <linux/clk.h>
 #include <linux/iopoll.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 #include <dt-bindings/phy/phy.h>
 
 #define PCIE20_PARF_PHY_STTS         0x3c
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index b9ea7d058e93..04c54c229f08 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -14,7 +14,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_graph.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
@@ -28,6 +27,8 @@
 
 #include <dt-bindings/phy/phy-qcom-qmp.h>
 
+#include "../phy-provider.h"
+
 #include "phy-qcom-qmp-common.h"
 
 #include "phy-qcom-qmp.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
index a7c65cfe31df..df38d5b6d5be 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
@@ -13,12 +13,13 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 #include "phy-qcom-qmp-common.h"
 
 #include "phy-qcom-qmp.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index fed2fc9bb311..06680151360e 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -15,7 +15,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/phy/pcie.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
@@ -24,6 +23,8 @@
 
 #include <dt-bindings/phy/phy-qcom-qmp.h>
 
+#include "../phy-provider.h"
+
 #include "phy-qcom-qmp-common.h"
 
 #include "phy-qcom-qmp.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index df138a5442eb..75cd5b10fdb2 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -13,7 +13,6 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
@@ -21,6 +20,8 @@
 
 #include <ufs/unipro.h>
 
+#include "../phy-provider.h"
+
 #include "phy-qcom-qmp-common.h"
 
 #include "phy-qcom-qmp.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
index 2bd5862c5ba8..a682b30db03e 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
@@ -14,13 +14,14 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 #include "phy-qcom-qmp.h"
 #include "phy-qcom-qmp-pcs-misc-v3.h"
 #include "phy-qcom-qmp-pcs-usb-v4.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index d88b8a415e85..3db0a5282dbf 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -13,13 +13,14 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 #include "phy-qcom-qmp-common.h"
 
 #include "phy-qcom-qmp.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
index f62e1f6ecc07..b77007f8fee3 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
@@ -14,7 +14,6 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
@@ -25,6 +24,8 @@
 #include <linux/usb/typec_mux.h>
 #include <dt-bindings/phy/phy-qcom-qmp.h>
 
+#include "../phy-provider.h"
+
 #include "phy-qcom-qmp-common.h"
 
 #include "phy-qcom-qmp.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 191040f6d60f..e5516099b911 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -3,6 +3,7 @@
  * Copyright (c) 2017, 2019, The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/err.h>
@@ -12,7 +13,6 @@
 #include <linux/module.h>
 #include <linux/nvmem-consumer.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
@@ -20,7 +20,7 @@
 #include <linux/reset.h>
 #include <linux/slab.h>
 
-#include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include "../phy-provider.h"
 
 #define QUSB2PHY_PLL			0x0
 #define QUSB2PHY_PLL_TEST		0x04
diff --git a/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c b/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
index 5b1c82459c12..4f8ffc6524ab 100644
--- a/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
+++ b/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
@@ -7,10 +7,11 @@
 #include <linux/ethtool.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #include "phy-qcom-qmp-pcs-sgmii.h"
 #include "phy-qcom-qmp-qserdes-com-v5.h"
 #include "phy-qcom-qmp-qserdes-txrx-v5.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
index 8915fa250e81..17a33e545008 100644
--- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
+++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
@@ -10,7 +10,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
@@ -18,6 +17,8 @@
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 #define USB2_PHY_USB_PHY_UTMI_CTRL0		(0x3c)
 #define SLEEPM					BIT(0)
 #define OPMODE_MASK				GENMASK(4, 3)
diff --git a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
index 324c0a5d658e..13828d4f788e 100644
--- a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
+++ b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
@@ -12,12 +12,13 @@
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/units.h>
 
+#include "../phy-provider.h"
+
 #define RST_ASSERT_DELAY_MIN_US		100
 #define RST_ASSERT_DELAY_MAX_US		150
 #define PIPE_CLK_DELAY_MIN_US		5000
diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c b/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
index a52a9bf13b75..ce317deaeacb 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
@@ -11,12 +11,13 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_graph.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 /* PHY register and bit definitions */
 #define PHY_CTRL_COMMON0		0x078
 #define SIDDQ				BIT(2)
diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs.c b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
index 98a18987f1be..95581926023f 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-hs.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
@@ -8,11 +8,12 @@
 #include <linux/clk.h>
 #include <linux/regulator/consumer.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/reset.h>
 #include <linux/extcon.h>
 #include <linux/notifier.h>
 
+#include "../phy-provider.h"
+
 #define ULPI_PWR_CLK_MNG_REG		0x88
 # define ULPI_PWR_OTG_COMP_DISABLE	BIT(0)
 
diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hsic.c b/drivers/phy/qualcomm/phy-qcom-usb-hsic.c
index 20f6dd37c7c1..fe9315a2f207 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-hsic.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hsic.c
@@ -5,12 +5,13 @@
 #include <linux/module.h>
 #include <linux/ulpi/driver.h>
 #include <linux/ulpi/regs.h>
-#include <linux/phy/phy.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/pinctrl-state.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
 
+#include "../phy-provider.h"
+
 #define ULPI_HSIC_CFG		0x30
 #define ULPI_HSIC_IO_CAL	0x33
 
diff --git a/drivers/phy/qualcomm/phy-qcom-usb-ss.c b/drivers/phy/qualcomm/phy-qcom-usb-ss.c
index a3a6d3ce7ea1..17ca14a0b34d 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-ss.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-ss.c
@@ -11,12 +11,13 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 #define PHY_CTRL0			0x6C
 #define PHY_CTRL1			0x70
 #define PHY_CTRL2			0x74
diff --git a/drivers/phy/ralink/phy-mt7621-pci.c b/drivers/phy/ralink/phy-mt7621-pci.c
index a591ad95347c..4865a264136d 100644
--- a/drivers/phy/ralink/phy-mt7621-pci.c
+++ b/drivers/phy/ralink/phy-mt7621-pci.c
@@ -10,11 +10,12 @@
 #include <linux/bitops.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/sys_soc.h>
 
+#include "../phy-provider.h"
+
 #define RG_PE1_PIPE_REG				0x02c
 #define RG_PE1_PIPE_RST				BIT(12)
 #define RG_PE1_PIPE_CMD_FRC			BIT(4)
diff --git a/drivers/phy/ralink/phy-ralink-usb.c b/drivers/phy/ralink/phy-ralink-usb.c
index 0ff07e210769..cc61139ce157 100644
--- a/drivers/phy/ralink/phy-ralink-usb.c
+++ b/drivers/phy/ralink/phy-ralink-usb.c
@@ -14,11 +14,12 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define RT_SYSC_REG_SYSCFG1		0x014
 #define RT_SYSC_REG_CLKCFG1		0x030
 #define RT_SYSC_REG_USB_PHY_CFG		0x05c
diff --git a/drivers/phy/realtek/phy-rtk-usb2.c b/drivers/phy/realtek/phy-rtk-usb2.c
index 248550ef98ca..a0431f11972e 100644
--- a/drivers/phy/realtek/phy-rtk-usb2.c
+++ b/drivers/phy/realtek/phy-rtk-usb2.c
@@ -16,9 +16,10 @@
 #include <linux/regmap.h>
 #include <linux/sys_soc.h>
 #include <linux/mfd/syscon.h>
-#include <linux/phy/phy.h>
 #include <linux/usb.h>
 
+#include "../phy-provider.h"
+
 /* GUSB2PHYACCn register */
 #define PHY_NEW_REG_REQ BIT(25)
 #define PHY_VSTS_BUSY   BIT(23)
diff --git a/drivers/phy/realtek/phy-rtk-usb3.c b/drivers/phy/realtek/phy-rtk-usb3.c
index cce453686db2..3f565c4d96be 100644
--- a/drivers/phy/realtek/phy-rtk-usb3.c
+++ b/drivers/phy/realtek/phy-rtk-usb3.c
@@ -16,9 +16,10 @@
 #include <linux/regmap.h>
 #include <linux/sys_soc.h>
 #include <linux/mfd/syscon.h>
-#include <linux/phy/phy.h>
 #include <linux/usb.h>
 
+#include "../phy-provider.h"
+
 #define USB_MDIO_CTRL_PHY_BUSY BIT(7)
 #define USB_MDIO_CTRL_PHY_WRITE BIT(0)
 #define USB_MDIO_CTRL_PHY_ADDR_SHIFT 8
diff --git a/drivers/phy/renesas/phy-rcar-gen2.c b/drivers/phy/renesas/phy-rcar-gen2.c
index 6c671254c625..ca5498986120 100644
--- a/drivers/phy/renesas/phy-rcar-gen2.c
+++ b/drivers/phy/renesas/phy-rcar-gen2.c
@@ -12,11 +12,12 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 #include <linux/atomic.h>
 
+#include "../phy-provider.h"
+
 #define USBHS_LPSTS			0x02
 #define USBHS_UGCTRL			0x80
 #define USBHS_UGCTRL2			0x84
diff --git a/drivers/phy/renesas/phy-rcar-gen3-pcie.c b/drivers/phy/renesas/phy-rcar-gen3-pcie.c
index 3e2cf59ad480..747a1cd74639 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-pcie.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-pcie.c
@@ -9,11 +9,12 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/spinlock.h>
 
+#include "../phy-provider.h"
+
 #define PHY_CTRL		0x4000		/* R8A77980 only */
 
 /* PHY control register (PHY_CTRL) */
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index cfc2a8d9028d..48ae5a507752 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -19,7 +19,6 @@
 #include <linux/mutex.h>
 #include <linux/mux/consumer.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
@@ -29,6 +28,8 @@
 #include <linux/usb/of.h>
 #include <linux/workqueue.h>
 
+#include "../phy-provider.h"
+
 /******* USB2.0 Host registers (original offset is +0x200) *******/
 #define USB2_INT_ENABLE		0x000
 #define USB2_AHB_BUS_CTR	0x008
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb3.c b/drivers/phy/renesas/phy-rcar-gen3-usb3.c
index 0420f5b283ce..3511831e95d2 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb3.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb3.c
@@ -10,10 +10,11 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 
+#include "../phy-provider.h"
+
 #define USB30_CLKSET0		0x034
 #define USB30_CLKSET1		0x036
 #define USB30_SSC_SET		0x038
diff --git a/drivers/phy/renesas/phy-rzg3e-usb3.c b/drivers/phy/renesas/phy-rzg3e-usb3.c
index 6b3453ea0004..1c9e2276bb73 100644
--- a/drivers/phy/renesas/phy-rzg3e-usb3.c
+++ b/drivers/phy/renesas/phy-rzg3e-usb3.c
@@ -11,11 +11,12 @@
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define USB3_TEST_RESET				0x0000
 #define USB3_TEST_UTMICTRL2			0x0b04
 #define USB3_TEST_PRMCTRL5_R			0x0c10
diff --git a/drivers/phy/renesas/r8a779f0-ether-serdes.c b/drivers/phy/renesas/r8a779f0-ether-serdes.c
index c34427ac4fdb..807af518aeda 100644
--- a/drivers/phy/renesas/r8a779f0-ether-serdes.c
+++ b/drivers/phy/renesas/r8a779f0-ether-serdes.c
@@ -10,11 +10,12 @@
 #include <linux/kernel.h>
 #include <linux/of.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define R8A779F0_ETH_SERDES_NUM			3
 #define R8A779F0_ETH_SERDES_OFFSET		0x0400
 #define R8A779F0_ETH_SERDES_BANK_SELECT		0x03fc
diff --git a/drivers/phy/rockchip/phy-rockchip-dp.c b/drivers/phy/rockchip/phy-rockchip-dp.c
index 592aa956eead..63e972969379 100644
--- a/drivers/phy/rockchip/phy-rockchip-dp.c
+++ b/drivers/phy/rockchip/phy-rockchip-dp.c
@@ -10,10 +10,11 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define GRF_SOC_CON12                           0x0274
 
 #define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK   BIT(20)
diff --git a/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c b/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c
index e6a768bbb9b3..de7e00580e20 100644
--- a/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c
+++ b/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c
@@ -21,11 +21,12 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/phy/phy-mipi-dphy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define RK3399_GRF_SOC_CON9		0x6224
 #define RK3399_GRF_SOC_CON21		0x6254
 #define RK3399_GRF_SOC_CON22		0x6258
diff --git a/drivers/phy/rockchip/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c
index 5187983c58e5..fd292f063f48 100644
--- a/drivers/phy/rockchip/phy-rockchip-emmc.c
+++ b/drivers/phy/rockchip/phy-rockchip-emmc.c
@@ -13,10 +13,11 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /*
  * The higher 16-bit of this register is used for write protection
  * only if BIT(x + 16) set to 1 the BIT(x) can be written.
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
index c79fb53d8ee5..3b5d86b07564 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
@@ -13,13 +13,14 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
 #include <linux/phy/phy-mipi-dphy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 /* GRF */
 #define RK1808_GRF_PD_VI_CON_OFFSET	0x0430
 
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
index 30d5e5ddff4a..5613b34958fe 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
@@ -15,13 +15,13 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/phy/phy-mipi-dphy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
 #include <linux/time64.h>
 
-#include <linux/phy/phy.h>
-#include <linux/phy/phy-mipi-dphy.h>
+#include "../phy-provider.h"
 
 #define UPDATE(x, h, l)	(((x) << (l)) & GENMASK((h), (l)))
 
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
index 1483907413fa..82b5e7434f83 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
@@ -20,6 +20,8 @@
 #include <linux/phy/phy.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 #define UPDATE(x, h, l)		(((x) << (l)) & GENMASK((h), (l)))
 
 /* REG: 0x00 */
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 8f4c08e599aa..f88e09f61994 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -18,7 +18,6 @@
 #include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
 #include <linux/regmap.h>
@@ -27,6 +26,8 @@
 #include <linux/usb/of.h>
 #include <linux/usb/otg.h>
 
+#include "../phy-provider.h"
+
 #define BIT_WRITEABLE_SHIFT	16
 #define SCHEDULE_DELAY		(60 * HZ)
 #define OTG_SCHEDULE_DELAY	(2 * HZ)
diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
index b60d6bf3f33c..2deb2666acb1 100644
--- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
@@ -9,12 +9,13 @@
 #include <linux/clk.h>
 #include <linux/mfd/syscon.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/units.h>
 
+#include "../phy-provider.h"
+
 #define BIT_WRITEABLE_SHIFT		16
 #define REF_CLOCK_24MHz			(24 * HZ_PER_MHZ)
 #define REF_CLOCK_25MHz			(25 * HZ_PER_MHZ)
diff --git a/drivers/phy/rockchip/phy-rockchip-pcie.c b/drivers/phy/rockchip/phy-rockchip-pcie.c
index 126306c01454..604ff00653b0 100644
--- a/drivers/phy/rockchip/phy-rockchip-pcie.c
+++ b/drivers/phy/rockchip/phy-rockchip-pcie.c
@@ -13,12 +13,12 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
 
 #define PHY_MAX_LANE_NUM      4
 #define PHY_CFG_DATA_MASK     GENMASK(10, 7)
diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c b/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
index 0f69060aa5d5..78a0446b81df 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
@@ -15,12 +15,13 @@
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define BIAS_CON0		0x0000
 #define I_RES_CNTL_MASK		GENMASK(6, 4)
 #define I_RES_CNTL(x)		FIELD_PREP(I_RES_CNTL_MASK, x)
diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
index 2d973bc37f07..01801a4dc436 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
@@ -21,6 +21,8 @@
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define GRF_HDPTX_CON0			0x00
 #define LC_REF_CLK_SEL			BIT(11)
 #define HDPTX_I_PLL_EN			BIT(7)
diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
index 4e8ffd173096..029566330aa0 100644
--- a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
+++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
@@ -14,11 +14,12 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/phy/pcie.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 /* Register for RK3568 */
 #define GRF_PCIE30PHY_CON1			0x4
 #define GRF_PCIE30PHY_CON6			0x18
diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
index 0a318ccf1bbf..4a9756ca4f68 100644
--- a/drivers/phy/rockchip/phy-rockchip-typec.c
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
@@ -43,6 +43,7 @@
 #include <linux/io.h>
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
@@ -53,8 +54,7 @@
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
-#include <linux/mfd/syscon.h>
-#include <linux/phy/phy.h>
+#include "../phy-provider.h"
 
 #define CMN_SSM_BANDGAP			(0x21 << 2)
 #define CMN_SSM_BIAS			(0x22 << 2)
diff --git a/drivers/phy/rockchip/phy-rockchip-usb.c b/drivers/phy/rockchip/phy-rockchip-usb.c
index cef96739cf3f..0652f821332b 100644
--- a/drivers/phy/rockchip/phy-rockchip-usb.c
+++ b/drivers/phy/rockchip/phy-rockchip-usb.c
@@ -14,7 +14,6 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/regulator/consumer.h>
@@ -23,6 +22,8 @@
 #include <linux/mfd/syscon.h>
 #include <linux/delay.h>
 
+#include "../phy-provider.h"
+
 static int enable_usb_uart;
 
 #define UOC_CON0					0x00
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index fba35510d88c..cf2abf29512f 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -25,6 +25,8 @@
 #include <linux/usb/typec_dp.h>
 #include <linux/usb/typec_mux.h>
 
+#include "../phy-provider.h"
+
 /* USBDP PHY Register Definitions */
 #define UDPHY_PCS				0x4000
 #define UDPHY_PMA				0x8000
diff --git a/drivers/phy/samsung/phy-exynos-dp-video.c b/drivers/phy/samsung/phy-exynos-dp-video.c
index a636dee07585..00d0ed82a620 100644
--- a/drivers/phy/samsung/phy-exynos-dp-video.c
+++ b/drivers/phy/samsung/phy-exynos-dp-video.c
@@ -12,11 +12,12 @@
 #include <linux/module.h>
 #include <linux/mfd/syscon.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/soc/samsung/exynos-regs-pmu.h>
 
+#include "../phy-provider.h"
+
 struct exynos_dp_video_phy_drvdata {
 	u32 phy_ctrl_offset;
 };
diff --git a/drivers/phy/samsung/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c
index be925508ed97..ce8a258a104e 100644
--- a/drivers/phy/samsung/phy-exynos-mipi-video.c
+++ b/drivers/phy/samsung/phy-exynos-mipi-video.c
@@ -11,13 +11,14 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/spinlock.h>
 #include <linux/soc/samsung/exynos-regs-pmu.h>
 #include <linux/mfd/syscon.h>
 
+#include "../phy-provider.h"
+
 enum exynos_mipi_phy_id {
 	EXYNOS_MIPI_PHY_ID_NONE = -1,
 	EXYNOS_MIPI_PHY_ID_CSIS0,
diff --git a/drivers/phy/samsung/phy-exynos-pcie.c b/drivers/phy/samsung/phy-exynos-pcie.c
index 53c9230c2907..9dd3a4a90fa7 100644
--- a/drivers/phy/samsung/phy-exynos-pcie.c
+++ b/drivers/phy/samsung/phy-exynos-pcie.c
@@ -12,9 +12,10 @@
 #include <linux/mfd/syscon.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define PCIE_PHY_OFFSET(x)		((x) * 0x4)
 
 /* Sysreg FSYS register offsets and bits for Exynos5433 */
diff --git a/drivers/phy/samsung/phy-exynos4210-usb2.c b/drivers/phy/samsung/phy-exynos4210-usb2.c
index 3898a7f58217..beb2f96bebbf 100644
--- a/drivers/phy/samsung/phy-exynos4210-usb2.c
+++ b/drivers/phy/samsung/phy-exynos4210-usb2.c
@@ -8,8 +8,9 @@
 
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
+
+#include "../phy-provider.h"
 #include "phy-samsung-usb2.h"
 
 /* Exynos USB PHY registers */
diff --git a/drivers/phy/samsung/phy-exynos4x12-usb2.c b/drivers/phy/samsung/phy-exynos4x12-usb2.c
index b528a5d037fe..a402f80d0aab 100644
--- a/drivers/phy/samsung/phy-exynos4x12-usb2.c
+++ b/drivers/phy/samsung/phy-exynos4x12-usb2.c
@@ -8,8 +8,9 @@
 
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
+
+#include "../phy-provider.h"
 #include "phy-samsung-usb2.h"
 
 /* Exynos USB PHY registers */
diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
index 5a181cb4597e..cb476d007e3f 100644
--- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
@@ -26,6 +26,8 @@
 #include <linux/usb/typec.h>
 #include <linux/usb/typec_mux.h>
 
+#include "../phy-provider.h"
+
 /* Exynos USB PHY registers */
 #define EXYNOS5_FSEL_9MHZ6		0x0
 #define EXYNOS5_FSEL_10MHZ		0x1
diff --git a/drivers/phy/samsung/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c
index 595adba5fb8f..0f85ae0a5901 100644
--- a/drivers/phy/samsung/phy-exynos5250-sata.c
+++ b/drivers/phy/samsung/phy-exynos5250-sata.c
@@ -15,12 +15,13 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/spinlock.h>
 #include <linux/mfd/syscon.h>
 
+#include "../phy-provider.h"
+
 #define SATAPHY_CONTROL_OFFSET		0x0724
 #define EXYNOS5_SATAPHY_PMU_ENABLE	BIT(0)
 #define EXYNOS5_SATA_RESET		0x4
diff --git a/drivers/phy/samsung/phy-exynos5250-usb2.c b/drivers/phy/samsung/phy-exynos5250-usb2.c
index 21b06072f866..04815633f290 100644
--- a/drivers/phy/samsung/phy-exynos5250-usb2.c
+++ b/drivers/phy/samsung/phy-exynos5250-usb2.c
@@ -8,8 +8,9 @@
 
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
+
+#include "../phy-provider.h"
 #include "phy-samsung-usb2.h"
 
 /* Exynos USB PHY registers */
diff --git a/drivers/phy/samsung/phy-s5pv210-usb2.c b/drivers/phy/samsung/phy-s5pv210-usb2.c
index 32be62e49804..4d72559d29a9 100644
--- a/drivers/phy/samsung/phy-s5pv210-usb2.c
+++ b/drivers/phy/samsung/phy-s5pv210-usb2.c
@@ -8,7 +8,8 @@
 
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
 #include "phy-samsung-usb2.h"
 
 /* Exynos USB PHY registers */
diff --git a/drivers/phy/samsung/phy-samsung-ufs.c b/drivers/phy/samsung/phy-samsung-ufs.c
index ee665f26c236..b55a726cd44e 100644
--- a/drivers/phy/samsung/phy-samsung-ufs.c
+++ b/drivers/phy/samsung/phy-samsung-ufs.c
@@ -15,10 +15,10 @@
 #include <linux/iopoll.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
 #include "phy-samsung-ufs.h"
 
 #define for_each_phy_lane(phy, i) \
diff --git a/drivers/phy/samsung/phy-samsung-ufs.h b/drivers/phy/samsung/phy-samsung-ufs.h
index f2c2e744e5ba..90f4d4cef631 100644
--- a/drivers/phy/samsung/phy-samsung-ufs.h
+++ b/drivers/phy/samsung/phy-samsung-ufs.h
@@ -10,9 +10,10 @@
 #ifndef _PHY_SAMSUNG_UFS_
 #define _PHY_SAMSUNG_UFS_
 
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define PHY_COMN_BLK	1
 #define PHY_TRSV_BLK	2
 #define END_UFS_PHY_CFG { 0 }
diff --git a/drivers/phy/samsung/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c
index d2749b67cf8f..362dd4ae3cab 100644
--- a/drivers/phy/samsung/phy-samsung-usb2.c
+++ b/drivers/phy/samsung/phy-samsung-usb2.c
@@ -13,6 +13,8 @@
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
+
+#include "../phy-provider.h"
 #include "phy-samsung-usb2.h"
 
 static int samsung_usb2_phy_power_on(struct phy *phy)
diff --git a/drivers/phy/samsung/phy-samsung-usb2.h b/drivers/phy/samsung/phy-samsung-usb2.h
index ebaf43bfc5a2..515c7938fccd 100644
--- a/drivers/phy/samsung/phy-samsung-usb2.h
+++ b/drivers/phy/samsung/phy-samsung-usb2.h
@@ -10,12 +10,13 @@
 #define _PHY_EXYNOS_USB2_H
 
 #include <linux/clk.h>
-#include <linux/phy/phy.h>
 #include <linux/device.h>
 #include <linux/regmap.h>
 #include <linux/spinlock.h>
 #include <linux/regulator/consumer.h>
 
+#include "../phy-provider.h"
+
 #define KHZ 1000
 #define MHZ (KHZ * KHZ)
 
diff --git a/drivers/phy/socionext/phy-uniphier-ahci.c b/drivers/phy/socionext/phy-uniphier-ahci.c
index 28cf3efe0695..6b3ce56c7f0c 100644
--- a/drivers/phy/socionext/phy-uniphier-ahci.c
+++ b/drivers/phy/socionext/phy-uniphier-ahci.c
@@ -12,10 +12,11 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 struct uniphier_ahciphy_priv {
 	struct device *dev;
 	void __iomem  *base;
diff --git a/drivers/phy/socionext/phy-uniphier-pcie.c b/drivers/phy/socionext/phy-uniphier-pcie.c
index c19173492b79..00f6cdf846f1 100644
--- a/drivers/phy/socionext/phy-uniphier-pcie.c
+++ b/drivers/phy/socionext/phy-uniphier-pcie.c
@@ -12,12 +12,13 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/resource.h>
 
+#include "../phy-provider.h"
+
 /* PHY */
 #define PCL_PHY_CLKCTRL		0x0000
 #define PORT_SEL_MASK		GENMASK(11, 9)
diff --git a/drivers/phy/socionext/phy-uniphier-usb2.c b/drivers/phy/socionext/phy-uniphier-usb2.c
index c49d432e526b..6ee566478be0 100644
--- a/drivers/phy/socionext/phy-uniphier-usb2.c
+++ b/drivers/phy/socionext/phy-uniphier-usb2.c
@@ -10,11 +10,12 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 
+#include "../phy-provider.h"
+
 #define SG_USBPHY1CTRL		0x500
 #define SG_USBPHY1CTRL2		0x504
 #define SG_USBPHY2CTRL		0x508
diff --git a/drivers/phy/socionext/phy-uniphier-usb3hs.c b/drivers/phy/socionext/phy-uniphier-usb3hs.c
index 8c8673df0084..a08db863223f 100644
--- a/drivers/phy/socionext/phy-uniphier-usb3hs.c
+++ b/drivers/phy/socionext/phy-uniphier-usb3hs.c
@@ -17,12 +17,13 @@
 #include <linux/nvmem-consumer.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 #define HSPHY_CFG0		0x0
 #define HSPHY_CFG0_HS_I_MASK	GENMASK(31, 28)
 #define HSPHY_CFG0_HSDISC_MASK	GENMASK(27, 26)
diff --git a/drivers/phy/socionext/phy-uniphier-usb3ss.c b/drivers/phy/socionext/phy-uniphier-usb3ss.c
index f402ed8732fd..8829305e9d4c 100644
--- a/drivers/phy/socionext/phy-uniphier-usb3ss.c
+++ b/drivers/phy/socionext/phy-uniphier-usb3ss.c
@@ -16,11 +16,12 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define SSPHY_TESTI		0x0
 #define TESTI_DAT_MASK		GENMASK(13, 6)
 #define TESTI_ADR_MASK		GENMASK(5, 1)
diff --git a/drivers/phy/sophgo/phy-cv1800-usb2.c b/drivers/phy/sophgo/phy-cv1800-usb2.c
index 6fe846534e9c..1fd7bba498ad 100644
--- a/drivers/phy/sophgo/phy-cv1800-usb2.c
+++ b/drivers/phy/sophgo/phy-cv1800-usb2.c
@@ -12,10 +12,11 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 #include <linux/spinlock.h>
 
+#include "../phy-provider.h"
+
 #define REG_USB_PHY_CTRL		0x048
 
 #define PHY_VBUS_POWER_EN		BIT(0)
diff --git a/drivers/phy/spacemit/phy-k1-pcie.c b/drivers/phy/spacemit/phy-k1-pcie.c
index 75477bea7f70..6f8f2f39f7f8 100644
--- a/drivers/phy/spacemit/phy-k1-pcie.c
+++ b/drivers/phy/spacemit/phy-k1-pcie.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2025 by RISCstar Solutions Corporation.  All rights reserved.
  */
 
+#include <dt-bindings/phy/phy.h>
 #include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
@@ -12,12 +13,11 @@
 #include <linux/kernel.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
-#include <dt-bindings/phy/phy.h>
+#include "../phy-provider.h"
 
 /*
  * Three PCIe ports are supported in the SpacemiT K1 SoC, and this driver
diff --git a/drivers/phy/spacemit/phy-k1-usb2.c b/drivers/phy/spacemit/phy-k1-usb2.c
index 14a02f554810..f482b6c9b6d4 100644
--- a/drivers/phy/spacemit/phy-k1-usb2.c
+++ b/drivers/phy/spacemit/phy-k1-usb2.c
@@ -9,11 +9,12 @@
 #include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/iopoll.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/usb/of.h>
 
+#include "../phy-provider.h"
+
 #define PHY_RST_MODE_CTRL		0x04
 #define  PHY_PLL_RDY			BIT(0)
 #define  PHY_CLK_CDR_EN			BIT(1)
diff --git a/drivers/phy/st/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c
index 43cef89af55e..e9792deb629a 100644
--- a/drivers/phy/st/phy-miphy28lp.c
+++ b/drivers/phy/st/phy-miphy28lp.c
@@ -7,6 +7,7 @@
  * Author: Alexandre Torgue <alexandre.torgue@st.com>
  */
 
+#include <dt-bindings/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
@@ -16,13 +17,12 @@
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
 #include <linux/clk.h>
-#include <linux/phy/phy.h>
 #include <linux/delay.h>
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
-#include <dt-bindings/phy/phy.h>
+#include "../phy-provider.h"
 
 /* MiPHY registers */
 #define MIPHY_CONF_RESET		0x00
diff --git a/drivers/phy/st/phy-spear1310-miphy.c b/drivers/phy/st/phy-spear1310-miphy.c
index c661ab63505f..86acc2412c46 100644
--- a/drivers/phy/st/phy-spear1310-miphy.c
+++ b/drivers/phy/st/phy-spear1310-miphy.c
@@ -14,10 +14,11 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /* SPEAr1310 Registers */
 #define SPEAR1310_PCIE_SATA_CFG			0x3A4
 	#define SPEAR1310_PCIE_SATA2_SEL_PCIE		(0 << 31)
diff --git a/drivers/phy/st/phy-spear1340-miphy.c b/drivers/phy/st/phy-spear1340-miphy.c
index 85a60d64ebb7..4dbd3158c060 100644
--- a/drivers/phy/st/phy-spear1340-miphy.c
+++ b/drivers/phy/st/phy-spear1340-miphy.c
@@ -14,10 +14,11 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /* SPEAr1340 Registers */
 /* Power Management Registers */
 #define SPEAR1340_PCM_CFG			0x100
diff --git a/drivers/phy/st/phy-stih407-usb.c b/drivers/phy/st/phy-stih407-usb.c
index 7a3e4584895c..497f9aa4139d 100644
--- a/drivers/phy/st/phy-stih407-usb.c
+++ b/drivers/phy/st/phy-stih407-usb.c
@@ -16,7 +16,8 @@
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/mfd/syscon.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
 
 #define PHYPARAM_REG	0
 #define PHYCTRL_REG	1
diff --git a/drivers/phy/st/phy-stm32-combophy.c b/drivers/phy/st/phy-stm32-combophy.c
index 607b4d607eb5..8757b1993e90 100644
--- a/drivers/phy/st/phy-stm32-combophy.c
+++ b/drivers/phy/st/phy-stm32-combophy.c
@@ -10,12 +10,13 @@
 #include <linux/clk.h>
 #include <linux/mfd/syscon.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <dt-bindings/phy/phy.h>
 
+#include "../phy-provider.h"
+
 #define SYSCFG_COMBOPHY_CR1 0x4c00
 #define SYSCFG_COMBOPHY_CR2 0x4c04
 #define SYSCFG_COMBOPHY_CR4 0x4c0c
diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c
index b44afbff8616..647fbbe5c734 100644
--- a/drivers/phy/st/phy-stm32-usbphyc.c
+++ b/drivers/phy/st/phy-stm32-usbphyc.c
@@ -18,6 +18,8 @@
 #include <linux/reset.h>
 #include <linux/units.h>
 
+#include "../phy-provider.h"
+
 #define STM32_USBPHYC_PLL	0x0
 #define STM32_USBPHYC_MISC	0x8
 #define STM32_USBPHYC_MONITOR(X) (0x108 + ((X) * 0x100))
diff --git a/drivers/phy/starfive/phy-jh7110-dphy-rx.c b/drivers/phy/starfive/phy-jh7110-dphy-rx.c
index 0b039e1f71c5..099a1ebf6194 100644
--- a/drivers/phy/starfive/phy-jh7110-dphy-rx.c
+++ b/drivers/phy/starfive/phy-jh7110-dphy-rx.c
@@ -13,11 +13,12 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define STF_DPHY_APBCFGSAIF_SYSCFG(x)		(x)
 
 #define STF_DPHY_ENABLE_CLK			BIT(6)
diff --git a/drivers/phy/starfive/phy-jh7110-dphy-tx.c b/drivers/phy/starfive/phy-jh7110-dphy-tx.c
index c64d1c91b130..a5faf06b6d14 100644
--- a/drivers/phy/starfive/phy-jh7110-dphy-tx.c
+++ b/drivers/phy/starfive/phy-jh7110-dphy-tx.c
@@ -15,12 +15,13 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/phy/phy.h>
 #include <linux/phy/phy-mipi-dphy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define STF_DPHY_APBIFSAIF_SYSCFG(x)			(x)
 
 #define STF_DPHY_AON_POWER_READY_N_ACTIVE		0
diff --git a/drivers/phy/starfive/phy-jh7110-pcie.c b/drivers/phy/starfive/phy-jh7110-pcie.c
index 734c8e007727..d68d396ac3cc 100644
--- a/drivers/phy/starfive/phy-jh7110-pcie.c
+++ b/drivers/phy/starfive/phy-jh7110-pcie.c
@@ -12,10 +12,11 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/mfd/syscon.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define PCIE_KVCO_LEVEL_OFF		0x28
 #define PCIE_USB3_PHY_PLL_CTL_OFF	0x7c
 #define PCIE_KVCO_TUNE_SIGNAL_OFF	0x80
diff --git a/drivers/phy/starfive/phy-jh7110-usb.c b/drivers/phy/starfive/phy-jh7110-usb.c
index b505d89860b4..5762586e5c7d 100644
--- a/drivers/phy/starfive/phy-jh7110-usb.c
+++ b/drivers/phy/starfive/phy-jh7110-usb.c
@@ -12,11 +12,12 @@
 #include <linux/io.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/usb/of.h>
 
+#include "../phy-provider.h"
+
 #define USB_125M_CLK_RATE		125000000
 #define USB_CLK_MODE_OFF		0x0
 #define USB_CLK_MODE_RX_NORMAL_PWR	BIT(1)
diff --git a/drivers/phy/sunplus/phy-sunplus-usb2.c b/drivers/phy/sunplus/phy-sunplus-usb2.c
index 637a5fbae6d9..2ddbc37d09ee 100644
--- a/drivers/phy/sunplus/phy-sunplus-usb2.c
+++ b/drivers/phy/sunplus/phy-sunplus-usb2.c
@@ -17,10 +17,11 @@
 #include <linux/module.h>
 #include <linux/nvmem-consumer.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define HIGH_MASK_BITS				GENMASK(31, 16)
 #define LOW_MASK_BITS				GENMASK(15, 0)
 #define OTP_DISC_LEVEL_DEFAULT			0xd
diff --git a/drivers/phy/tegra/phy-tegra194-p2u.c b/drivers/phy/tegra/phy-tegra194-p2u.c
index f49b417c9eb6..467b6b97e53d 100644
--- a/drivers/phy/tegra/phy-tegra194-p2u.c
+++ b/drivers/phy/tegra/phy-tegra194-p2u.c
@@ -11,9 +11,10 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 #define P2U_CONTROL_CMN			0x74
 #define P2U_CONTROL_CMN_ENABLE_L2_EXIT_RATE_CHANGE		BIT(13)
 #define P2U_CONTROL_CMN_SKP_SIZE_PROTECTION_EN			BIT(20)
diff --git a/drivers/phy/tegra/xusb-tegra124.c b/drivers/phy/tegra/xusb-tegra124.c
index 70b6213370a8..21686c6fb2d7 100644
--- a/drivers/phy/tegra/xusb-tegra124.c
+++ b/drivers/phy/tegra/xusb-tegra124.c
@@ -8,7 +8,6 @@
 #include <linux/mailbox_client.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
@@ -16,6 +15,7 @@
 
 #include <soc/tegra/fuse.h>
 
+#include "../phy-provider.h"
 #include "xusb.h"
 
 #define FUSE_SKU_CALIB_HS_CURR_LEVEL_PADX_SHIFT(x) ((x) ? 15 : 0)
diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
index 1ddf11265974..e017cb1ff484 100644
--- a/drivers/phy/tegra/xusb-tegra186.c
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -7,7 +7,6 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/regulator/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
@@ -15,6 +14,7 @@
 
 #include <soc/tegra/fuse.h>
 
+#include "../phy-provider.h"
 #include "xusb.h"
 
 /* FUSE USB_CALIB registers */
diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index 1abc5913ec49..006aba47b93d 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
@@ -21,6 +20,7 @@
 
 #include <soc/tegra/fuse.h>
 
+#include "../phy-provider.h"
 #include "xusb.h"
 
 #define FUSE_SKU_CALIB_HS_CURR_LEVEL_PADX_SHIFT(x) \
diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index 9d74c0ecc31b..07a2f5a4dbee 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -9,7 +9,6 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
 #include <linux/phy/tegra/xusb.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
@@ -19,6 +18,7 @@
 
 #include <soc/tegra/fuse.h>
 
+#include "../phy-provider.h"
 #include "xusb.h"
 
 static struct phy *tegra_xusb_pad_of_xlate(struct device *dev,
diff --git a/drivers/phy/ti/phy-am654-serdes.c b/drivers/phy/ti/phy-am654-serdes.c
index 5b6c27aa7e8b..8990b715525e 100644
--- a/drivers/phy/ti/phy-am654-serdes.c
+++ b/drivers/phy/ti/phy-am654-serdes.c
@@ -15,11 +15,12 @@
 #include <linux/mfd/syscon.h>
 #include <linux/mux/consumer.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define CMU_R004		0x4
 #define CMU_R060		0x60
 #define CMU_R07C		0x7c
diff --git a/drivers/phy/ti/phy-da8xx-usb.c b/drivers/phy/ti/phy-da8xx-usb.c
index 62fa6f89c0e6..261b65abd38b 100644
--- a/drivers/phy/ti/phy-da8xx-usb.c
+++ b/drivers/phy/ti/phy-da8xx-usb.c
@@ -11,12 +11,13 @@
 #include <linux/mfd/da8xx-cfgchip.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_data/phy-da8xx-usb.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define PHY_INIT_BITS	(CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN)
 
 struct da8xx_usb_phy {
diff --git a/drivers/phy/ti/phy-dm816x-usb.c b/drivers/phy/ti/phy-dm816x-usb.c
index d274831b731c..515ef7812bde 100644
--- a/drivers/phy/ti/phy-dm816x-usb.c
+++ b/drivers/phy/ti/phy-dm816x-usb.c
@@ -12,10 +12,11 @@
 #include <linux/err.h>
 #include <linux/pm_runtime.h>
 #include <linux/delay.h>
-#include <linux/phy/phy.h>
 
 #include <linux/mfd/syscon.h>
 
+#include "../phy-provider.h"
+
 /*
  * TRM has two sets of USB_CTRL registers.. The correct register bits
  * are in TRM section 24.9.8.2 USB_CTRL Register. The TRM documents the
diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c
index 6213c2b6005a..ce7dc692d7be 100644
--- a/drivers/phy/ti/phy-gmii-sel.c
+++ b/drivers/phy/ti/phy-gmii-sel.c
@@ -14,9 +14,10 @@
 #include <linux/of_address.h>
 #include <linux/of_net.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /* AM33xx SoC specific definitions for the CONTROL port */
 #define AM33XX_GMII_SEL_MODE_MII	0
 #define AM33XX_GMII_SEL_MODE_RMII	1
diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
index 1eb252604441..318f51d09c28 100644
--- a/drivers/phy/ti/phy-omap-usb2.c
+++ b/drivers/phy/ti/phy-omap-usb2.c
@@ -16,7 +16,6 @@
 #include <linux/of_platform.h>
 #include <linux/phy/omap_control_phy.h>
 #include <linux/phy/omap_usb.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/property.h>
@@ -25,6 +24,8 @@
 #include <linux/sys_soc.h>
 #include <linux/usb/phy_companion.h>
 
+#include "../phy-provider.h"
+
 #define USB2PHY_ANA_CONFIG1		0x4c
 #define USB2PHY_DISCON_BYP_LATCH	BIT(31)
 
diff --git a/drivers/phy/ti/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c
index b5543b5c674c..d63c8e872d5b 100644
--- a/drivers/phy/ti/phy-ti-pipe3.c
+++ b/drivers/phy/ti/phy-ti-pipe3.c
@@ -10,7 +10,6 @@
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/slab.h>
-#include <linux/phy/phy.h>
 #include <linux/of.h>
 #include <linux/clk.h>
 #include <linux/err.h>
@@ -22,6 +21,8 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define	PLL_STATUS		0x00000004
 #define	PLL_GO			0x00000008
 #define	PLL_CONFIGURATION1	0x0000000C
diff --git a/drivers/phy/ti/phy-twl4030-usb.c b/drivers/phy/ti/phy-twl4030-usb.c
index a26aec3ab29e..67c9883691fc 100644
--- a/drivers/phy/ti/phy-twl4030-usb.c
+++ b/drivers/phy/ti/phy-twl4030-usb.c
@@ -20,7 +20,6 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/usb/otg.h>
-#include <linux/phy/phy.h>
 #include <linux/pm_runtime.h>
 #include <linux/usb/musb.h>
 #include <linux/usb/ulpi.h>
@@ -29,6 +28,8 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 /* Register defines */
 
 #define MCPC_CTRL			0x30
diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c
index fe6b4925d166..db40594622da 100644
--- a/drivers/phy/xilinx/phy-zynqmp.c
+++ b/drivers/phy/xilinx/phy-zynqmp.c
@@ -12,6 +12,7 @@
  * PCIe should also work but that is experimental as of now.
  */
 
+#include <dt-bindings/phy/phy.h>
 #include <linux/clk.h>
 #include <linux/debugfs.h>
 #include <linux/delay.h>
@@ -19,12 +20,11 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
 
-#include <dt-bindings/phy/phy.h>
+#include "../phy-provider.h"
 
 /*
  * Lane Registers
diff --git a/include/linux/phy/phy-sun4i-usb.h b/include/linux/phy/phy-sun4i-usb.h
index f3e7b13608e4..66612be0dac5 100644
--- a/include/linux/phy/phy-sun4i-usb.h
+++ b/include/linux/phy/phy-sun4i-usb.h
@@ -6,7 +6,7 @@
 #ifndef PHY_SUN4I_USB_H_
 #define PHY_SUN4I_USB_H_
 
-#include "phy.h"
+struct phy;
 
 /**
  * sun4i_usb_phy_set_squelch_detect() - Enable/disable squelch detect
diff --git a/include/linux/phy/ulpi_phy.h b/include/linux/phy/ulpi_phy.h
index 7054b440347c..0f9e8430d398 100644
--- a/include/linux/phy/ulpi_phy.h
+++ b/include/linux/phy/ulpi_phy.h
@@ -1,5 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-#include <linux/phy/phy.h>
+#include "../../drivers/phy/phy-provider.h"
 
 /**
  * Helper that registers PHY for a ULPI device and adds a lookup for binding it
-- 
2.43.0

Re: [PATCH v2 phy-next 22/24] phy: include PHY provider header (2/2)

[Russell King (Oracle)]

On Sun, Mar 08, 2026 at 01:40:07PM +0200, vladimir.oltean@nxp.com wrote:
> diff --git a/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c b/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
> index 5b1c82459c12..4f8ffc6524ab 100644
> --- a/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
> +++ b/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
> @@ -7,10 +7,11 @@
>  #include <linux/ethtool.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
> -#include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
>  #include <linux/regmap.h>
>  
> +#include "../phy-provider.h"
> +

As we know, this will conflict with my patch in net-next. I guess Vinod
hasn't (yet?) merged the commit that Jakub provided.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!

Re: [PATCH v2 phy-next 22/24] phy: include PHY provider header (2/2)

[Vladimir Oltean]

On Sun, Mar 08, 2026 at 12:01:36PM +0000, Russell King (Oracle) wrote:
> On Sun, Mar 08, 2026 at 01:40:07PM +0200, vladimir.oltean@nxp.com wrote:
> > diff --git a/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c b/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
> > index 5b1c82459c12..4f8ffc6524ab 100644
> > --- a/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
> > +++ b/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
> > @@ -7,10 +7,11 @@
> >  #include <linux/ethtool.h>
> >  #include <linux/module.h>
> >  #include <linux/of.h>
> > -#include <linux/phy/phy.h>
> >  #include <linux/platform_device.h>
> >  #include <linux/regmap.h>
> >  
> > +#include "../phy-provider.h"
> > +
> 
> As we know, this will conflict with my patch in net-next. I guess Vinod
> hasn't (yet?) merged the commit that Jakub provided.

Right (https://lore.kernel.org/netdev/20260302155736.1fd2980e@kernel.org/).

My thinking is that linux-phy needs to provide this series as a tag
itself for other trees, so it needs to be applied apply on top of
v7.0-rc1 plus Jakub's tag.

But to get some (public) build testing, I based it onto current
linux-phy/next. I believe the adjustments can be made during patch
application. Jakub's tag can be pulled on demand when constructing the
linux-phy tag.

[PATCH v2 phy-next 23/24] phy: remove temporary provider compatibility from consumer header

[vladimir.oltean]

Now that all consumers have been updated to no longer dereference fields
inside struct phy, we can hide its definition altogether from public view.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
v1->v2: collect tag
---
 include/linux/phy/phy.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index 34b656084caf..0fdcefaa3f55 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -12,8 +12,6 @@
 
 #include <linux/phy/phy-props.h>
 
-#include "../../../drivers/phy/phy-provider.h"
-
 struct device;
 struct device_node;
 struct phy;
-- 
2.43.0

[PATCH v2 phy-next 24/24] MAINTAINERS: add regexes for linux-phy

[vladimir.oltean]

Some pragmatic shortcuts are being taken by PHY consumer driver authors,
which put a burden on the framework. A lot of these can be caught during
review.

Make sure the linux-phy list is copied on as many keywords that regexes
can reasonably catch.

Some considerations that led to this solution and not a simpler one:
- Consumers may be located anywhere, and their file naming provides no
  indication whatsoever that they are PHY API consumers.
- The network PHY API has similarly sounding API: phy_start(),
  phy_connect(), etc. Similarly, matching on "phy" would hit
  phys_addr_t, "cryptography", etc.
- The header files themselves need attention to avoid matching on
  include/linux/phy.h (network PHY), include/linux/usb/phy.h,
  drivers/net/vendor/device/phy.h, etc.
- At least for a transitional period, I suppose developers will still
  try to add PHY providers outside the subsystem (which is discouraged).

So I used \b to try to match on actual word boundaries and I went for
listing all markers of PHY API use as they may appear in patch contexts.

Bit rot is a valid concern. I will add a test to the build automation
that newly introduced struct and function names in include/linux/phy.h,
include/linux/phy-props.h and drivers/phy/phy-provider.h are matched by
the MAINTAINERS entry K: patterns.

The keyword patterns were written with great help from Joe Perches
<joe@perches.com>.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Joe Perches <joe@perches.com>

v1->v2:
- split into multiple regex patterns
- use matching-only (insted of capturing) regex patterns
- adjust commit message to reflect the Q&A from v1
---
 MAINTAINERS | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 55af015174a5..29a1c2474bf2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10713,6 +10713,17 @@ F:	Documentation/devicetree/bindings/phy/
 F:	drivers/phy/
 F:	include/dt-bindings/phy/
 F:	include/linux/phy/
+K:	(?:linux/phy/phy\.h|phy-props\.h|phy-provider\.h)
+K:	\b(?:__)?(?:devm_)?(?:of_)?phy_(?:create|destroy|provider_(?:un)?register)\b
+K:	\bphy_(?:create|remove)_lookup\b
+K:	\bphy_(?:get|set)_drvdata\b
+K:	\b(?:devm_)?(?:of_)?phy_(?:optional_)?(?:get|put)(?:_by_index)?\b
+K:	\bphy_pm_runtime_(?:get|put)(?:_sync)?\b
+K:	\bphy_(?:init|exit|power_(?:on|off))\b
+K:	\bphy_(?:get|set)_(?:mode(?:_ext)?|media|speed|bus_width|max_link_rate)\b
+K:	\bphy_(?:reset|configure|validate|calibrate)\b
+K:	\bphy_notify_(?:connect|disconnect|state)\b
+K:	\bstruct\s+phy(?:_ops|_attrs|_lookup|_provider)?\b
 
 GENERIC PINCTRL I2C DEMULTIPLEXER DRIVER
 M:	Wolfram Sang <wsa+renesas@sang-engineering.com>
-- 
2.43.0

Re: [PATCH v2 phy-next 24/24] MAINTAINERS: add regexes for linux-phy

[Joe Perches]

On Sun, 2026-03-08 at 13:40 +0200, vladimir.oltean@nxp.com wrote:
> diff --git a/MAINTAINERS b/MAINTAINERS
[]
> @@ -10713,6 +10713,17 @@ F:	Documentation/devicetree/bindings/phy/
> +K:	(?:linux/phy/phy\.h|phy-props\.h|phy-provider\.h)

phy-props.h and phy-provider.h don't seem to exist.
Are these going to be added later?
Maybe this should be phy-common-props.h ?

Perhaps if matching only the include uses:
(/ is escaped because get_maintainer is stupid)
something like:

K:	include\s*\<linux\/phy\/phy(?:-common-props|-provider)?\.h\>

Re: [PATCH v2 phy-next 24/24] MAINTAINERS: add regexes for linux-phy

[Vladimir Oltean]

On Sun, Mar 08, 2026 at 11:40:44AM -0700, Joe Perches wrote:
> On Sun, 2026-03-08 at 13:40 +0200, vladimir.oltean@nxp.com wrote:
> > diff --git a/MAINTAINERS b/MAINTAINERS
> []
> > @@ -10713,6 +10713,17 @@ F:	Documentation/devicetree/bindings/phy/
> > +K:	(?:linux/phy/phy\.h|phy-props\.h|phy-provider\.h)
> 
> phy-props.h and phy-provider.h don't seem to exist.
> Are these going to be added later?

They're actually provided by patch 13/24:
https://lore.kernel.org/linux-phy/20260308114009.2546587-13-vladimir.oltean@nxp.com/T/#u
./include/linux/phy/phy-props.h
./drivers/phy/phy-provider.h

> Maybe this should be phy-common-props.h ?

No, that's unrelated.

> Perhaps if matching only the include uses:
> (/ is escaped because get_maintainer is stupid)
> something like:
> 
> K:	include\s*\<linux\/phy\/phy(?:-common-props|-provider)?\.h\>

Why is get_maintainer stupid? I ran git format-patch -1 0fc83bd79589b
(random patch which includes <linux/phy/phy.h> and I got:

GENERIC PHY FRAMEWORK status: Supported:Keyword:(?:linux/phy/phy\.h|phy-props\.h|phy-provider\.h)
GENERIC PHY FRAMEWORK status: Supported:Keyword:\b(?:devm_)?(?:of_)?phy_(?:optional_)?(?:get|put)(?:_by_index)?\b
GENERIC PHY FRAMEWORK status: Supported:Keyword:\bphy_(?:init|exit|power_(?:on|off))\b
GENERIC PHY FRAMEWORK status: Supported:Keyword:\bphy_(?:get|set)_(?:mode(?:_ext)?|media|speed|bus_width|max_link_rate)\b
GENERIC PHY FRAMEWORK status: Supported:Keyword:\bstruct\s+phy(?:_ops|_attrs|_lookup|_provider)?\b

which seems to be OK, it matched the (?:linux/phy/phy\.h|phy-props\.h|phy-provider\.h) regex.

Re: [PATCH v2 phy-next 24/24] MAINTAINERS: add regexes for linux-phy

[Joe Perches]

On Sun, 2026-03-08 at 21:10 +0200, Vladimir Oltean wrote:
> On Sun, Mar 08, 2026 at 11:40:44AM -0700, Joe Perches wrote:
> > Perhaps if matching only the include uses:
> > (/ is escaped because get_maintainer is stupid)
> > something like:
> > 
> > K:	include\s*\<linux\/phy\/phy(?:-common-props|-provider)?\.h\>

> Why is get_maintainer stupid?

The get_maintainer code used to match keywords is

	    foreach my $line (keys %keyword_hash) {
		if ($text =~ m/$keyword_hash{$line}/x) {

so it seems the first / in the K: <foo> regex would terminate
the match.

It might have been better to use a different delimiter.
Maybe:

		if ($text =~ m{$keyword_hash{$line}}/x

Re: [PATCH v2 phy-next 24/24] MAINTAINERS: add regexes for linux-phy

[Vladimir Oltean]

On Sun, Mar 08, 2026 at 12:25:32PM -0700, Joe Perches wrote:
> On Sun, 2026-03-08 at 21:10 +0200, Vladimir Oltean wrote:
> > On Sun, Mar 08, 2026 at 11:40:44AM -0700, Joe Perches wrote:
> > > Perhaps if matching only the include uses:
> > > (/ is escaped because get_maintainer is stupid)
> > > something like:
> > > 
> > > K:	include\s*\<linux\/phy\/phy(?:-common-props|-provider)?\.h\>
> 
> > Why is get_maintainer stupid?
> 
> The get_maintainer code used to match keywords is
> 
> 	    foreach my $line (keys %keyword_hash) {
> 		if ($text =~ m/$keyword_hash{$line}/x) {
> 
> so it seems the first / in the K: <foo> regex would terminate
> the match.
> 
> It might have been better to use a different delimiter.
> Maybe:
> 
> 		if ($text =~ m{$keyword_hash{$line}}/x

So why does it match in my example?

Re: [PATCH v2 phy-next 24/24] MAINTAINERS: add regexes for linux-phy

[Joe Perches]

On Sun, 2026-03-08 at 22:56 +0200, Vladimir Oltean wrote:
> On Sun, Mar 08, 2026 at 12:25:32PM -0700, Joe Perches wrote:
> > On Sun, 2026-03-08 at 21:10 +0200, Vladimir Oltean wrote:
> On Sun, Mar 08, 2026 at 11:40:44AM -0700, Joe Perches wrote:
> > > Perhaps if matching only the include uses:
> > > > (/ is escaped because get_maintainer is stupid)
> > > > something like:
> > > > 
> > > > K:	include\s*\<linux\/phy\/phy(?:-common-props|-provider)?\.h\>
> 
> > > Why is get_maintainer stupid?
> > 
> > The get_maintainer code used to match keywords is
> > 
> 	    foreach my $line (keys %keyword_hash) {
> 		if ($text =~ m/$keyword_hash{$line}/x) {
> > 
> > so it seems the first / in the K: <foo> regex would terminate
> > the match.
> > 
> > It might have been better to use a different delimiter.
> > Maybe:
> > 
> 		if ($text =~ m{$keyword_hash{$line}}/x
> 
> So why does it match in my example?

Not sure really.  But it does match exactly.
Maybe the regex code scans forward until the last /
as the / character is not a "real" metacharacter.

I added some test code and it produced:

line:	<+#include <linux/phy/phy.h>>
kw:	<(?:linux/phy/phy\.h|phy-props\.h|phy-provider\.h)>
test:	<^[+-].*(?:linux/phy/phy\.h|phy-props\.h|phy-provider\.h)>
match:	<+#include <linux/phy/phy.h>

From https://perldoc.perl.org/perlrequick

Not all characters can be used 'as is' in a match.
Some characters, called metacharacters, are considered special,
and reserved for use in regex notation. The metacharacters are

{}[]()^$.|*+?\

A metacharacter can be matched literally by putting a backslash before it:

"2+2=4" =~ /2+2/;    # doesn't match, + is a metacharacter
"2+2=4" =~ /2\+2/;   # matches, \+ is treated like an ordinary +
'C:\WIN32' =~ /C:\\WIN/;                       # matches
"/usr/bin/perl" =~ /\/usr\/bin\/perl/;  # matches

In the last regex, the forward slash '/' is also backslashed, because it is used to delimit the regex.