[PATCH net-next v9 0/4] riscv: spacemit: Add ethernet support for K3

[Inochi Amaoto <inochiama@gmail.com>]

Add initial support for ethernet controller of the Spacemit K3 SoC.
This ethernet controller is almost a standard Synopsys DesignWare
MAC (version 5.40a). This controller require a syscon device to
configure some basic features, like interface type and internal delay.

Change from v8:
- https://lore.kernel.org/netdev/20260309004305.315018-1-inochiama@gmail.com
patch 2:
1. Apply Russell's tag.
patch 3:
1. reverse the order of the local variable to make it "reverse christmas
   tree" for function spacemit_dwmac_update_irq_config() and function
   spacemit_set_phy_intf_sel()
2. Apply Russell's tag
patch 4:
1. Add MAINTAINERS entry

Change from v7:
- https://lore.kernel.org/netdev/20260304080721.1658224-1-inochiama@gmail.com
patch 3:
1. Remove unused parameter in spacemit_dwmac_fix_delay().

Change from v6:
- https://lore.kernel.org/netdev/20260303010630.567674-1-inochiama@gmail.com
patch 1:
1. Drop the extra blank line at the last

Change from v5:
- https://lore.kernel.org/netdev/20260227075718.2243818-1-inochiama@gmail.com
patch 3:
1. fix error from checkpatch

Change from v4:
- https://lore.kernel.org/netdev/20260130022705.1059214-1-inochiama@gmail.com
patch 1:
1 Apply Rob's tag.
2 Adjust clock description according to Russell's suggestion.
patch 3:
1. Add set_phy_intf_sel() and get_interfaces() hook, suggested by Russell.

Change from v3:
- https://lore.kernel.org/netdev/20260128072931.875041-1-inochiama@gmail.com
patch 1:
1. fix the uncorrect compatible string postion
patch 3:
1. add "CTRL_" prefix to all ctrl register definition
2. only use delay config 0 to calculate delay code.
3. fix typo in the comment

Change from v2:
- https://lore.kernel.org/netdev/20260121071315.940130-1-inochiama@gmail.com
patch 1:
1. remove not needed compatible for select
2. drop empty line in "spacemit,apmu" properties
3. add spacemit,apmu properties to required.
patch 3:
1. remove misused phy_fix_phy_mode_for_mac_delays.
2. use local tx clock instead of the clk_tx_i in the dwmac.

Change from v1:
- https://lore.kernel.org/netdev/20260120043609.910302-1-inochiama@gmail.com
patch 1:
1. remove phy clock
patch 3:
1. improve comment and include something special about Spacmit K3 dwmac
2. reorder the included file
3. fix wrong delay macro used in spacemit_dwmac_set_delay.
4. add check for maximum supported delay.
5. use DIV_ROUND_CLOSEST to calculate best delay configuration.
6. use assign for the ctrl register initial value.
7. fix input when calling of_property_read_u32().

Inochi Amaoto (4):
  dt-bindings: net: Add support for Spacemit K3 dwmac
  net: stmmac: platform: Add snps,dwmac-5.40a IP compatible string
  net: stmmac: Add glue layer for Spacemit K3 SoC
  MAINTAINERS: add entry for SpacemiT DWMAC glue layer

 .../devicetree/bindings/net/snps,dwmac.yaml   |   2 +
 .../bindings/net/spacemit,k3-dwmac.yaml       | 102 ++++++++
 MAINTAINERS                                   |   6 +
 drivers/net/ethernet/stmicro/stmmac/Kconfig   |  12 +
 drivers/net/ethernet/stmicro/stmmac/Makefile  |   1 +
 .../ethernet/stmicro/stmmac/dwmac-spacemit.c  | 227 ++++++++++++++++++
 .../ethernet/stmicro/stmmac/stmmac_platform.c |   1 +
 7 files changed, 351 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/spacemit,k3-dwmac.yaml
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c

--
2.53.0