* [PATCH v3] tg3: replace placeholder MAC address with device property
@ 2026-03-13 6:08 Atharva Tiwari
2026-03-14 16:38 ` Jakub Kicinski
0 siblings, 1 reply; 2+ messages in thread
From: Atharva Tiwari @ 2026-03-13 6:08 UTC (permalink / raw)
Cc: Atharva Tiwari, Rishon Jonathan R, Vincent MORVAN, Paul SAGE,
Pavan Chebbi, Michael Chan, Andrew Lunn, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni, netdev, linux-kernel
From: Paul SAGE <paul.sage@42.fr>
On some systems (e.g. iMac 20,1 with BCM57766), the tg3 driver reads
a default placeholder mac address (00:10:18:00:00:00) from the
mailbox. The correct value on those systems are stored in the
'local-mac-address' property.
This patch, detect the default value and tries to retrieve
the correct address from the device_get_mac_address
function instead.
The patch has been tested on two different systems:
- iMac 20,1 (BCM57766) model which use the local-mac-address property
- iMac 13,2 (BCM57766) model which can use the mailbox,
NVRAM or MAC control registers
Tested-by: Rishon Jonathan R <mithicalaviator85@gmail.com>
Co-developed-by: Vincent MORVAN <vinc@42.fr>
Signed-off-by: Vincent MORVAN <vinc@42.fr>
Signed-off-by: Paul SAGE <paul.sage@42.fr>
Signed-off-by: Atharva Tiwari <atharvatiwarilinuxdev@gmail.com>
---
v3:
- Used ether_addr_equal
v2:
- Wrapped commit message to 70 characters
- Removed BROADCOM_OUI constant
---
---
drivers/net/ethernet/broadcom/tg3.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 75f66587983d..1a074ebdf58b 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -17030,6 +17030,13 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent)
return err;
}
+static int tg3_is_default_mac_address(u8 *addr)
+{
+ const u8 default_mac_address[ETH_ALEN] = { 0x00, 0x10, 0x18, 0x00, 0x00, 0x00 };
+
+ return ether_addr_equal(default_mac_address, addr);
+}
+
static int tg3_get_device_address(struct tg3 *tp, u8 *addr)
{
u32 hi, lo, mac_offset;
@@ -17103,6 +17110,10 @@ static int tg3_get_device_address(struct tg3 *tp, u8 *addr)
if (!is_valid_ether_addr(addr))
return -EINVAL;
+
+ if (tg3_is_default_mac_address(addr))
+ device_get_mac_address(&tp->pdev->dev, addr);
+
return 0;
}
--
2.43.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v3] tg3: replace placeholder MAC address with device property
2026-03-13 6:08 [PATCH v3] tg3: replace placeholder MAC address with device property Atharva Tiwari
@ 2026-03-14 16:38 ` Jakub Kicinski
0 siblings, 0 replies; 2+ messages in thread
From: Jakub Kicinski @ 2026-03-14 16:38 UTC (permalink / raw)
To: Atharva Tiwari
Cc: Rishon Jonathan R, Vincent MORVAN, Paul SAGE, Pavan Chebbi,
Michael Chan, Andrew Lunn, David S. Miller, Eric Dumazet,
Paolo Abeni, netdev, linux-kernel
On Fri, 13 Mar 2026 11:38:09 +0530 Atharva Tiwari wrote:
> +static int tg3_is_default_mac_address(u8 *addr)
> +{
> + const u8 default_mac_address[ETH_ALEN] = { 0x00, 0x10, 0x18, 0x00, 0x00, 0x00 };
Please add static as well. I think it should result in slightly smaller
object code.
> + return ether_addr_equal(default_mac_address, addr);
> +}
> +
> static int tg3_get_device_address(struct tg3 *tp, u8 *addr)
> {
> u32 hi, lo, mac_offset;
> @@ -17103,6 +17110,10 @@ static int tg3_get_device_address(struct tg3 *tp, u8 *addr)
>
> if (!is_valid_ether_addr(addr))
> return -EINVAL;
> +
> + if (tg3_is_default_mac_address(addr))
> + device_get_mac_address(&tp->pdev->dev, addr);
Shouldn't we return device_get_mac_address(); IOW return an error if
device_get.. failed?
--
pw-bot: cr
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-03-14 16:38 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-03-13 6:08 [PATCH v3] tg3: replace placeholder MAC address with device property Atharva Tiwari
2026-03-14 16:38 ` Jakub Kicinski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox