From: Nicolai Buchwitz <nb@tipi-net.de>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Doug Berger <opendmb@gmail.com>,
Florian Fainelli <florian.fainelli@broadcom.com>
Cc: "Broadcom internal kernel review list"
<bcm-kernel-feedback-list@broadcom.com>,
"Vikas Gupta" <vikas.gupta@broadcom.com>,
"Bhargava Marreddy" <bhargava.marreddy@broadcom.com>,
"Rajashekar Hudumula" <rajashekar.hudumula@broadcom.com>,
"Eric Biggers" <ebiggers@kernel.org>,
"Heiner Kallweit" <hkallweit1@gmail.com>,
"Markus Blöchl" <mbloch@rooftopnetworks.de>,
"Arnd Bergmann" <arnd@arndb.de>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
"Nicolai Buchwitz" <nb@tipi-net.de>
Subject: [PATCH net-next v2 3/6] net: bcmgenet: add basic XDP support (PASS/DROP)
Date: Sun, 15 Mar 2026 22:49:11 +0100 [thread overview]
Message-ID: <20260315214914.1555777-4-nb@tipi-net.de> (raw)
In-Reply-To: <20260315214914.1555777-1-nb@tipi-net.de>
Add XDP program attachment via ndo_bpf and execute XDP programs in the
RX path. XDP_PASS builds an SKB from the xdp_buff (handling
xdp_adjust_head/tail), XDP_DROP returns the page to page_pool without
SKB allocation.
XDP_TX and XDP_REDIRECT are not yet supported and return XDP_ABORTED.
Advertise NETDEV_XDP_ACT_BASIC in xdp_features.
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
---
.../net/ethernet/broadcom/genet/bcmgenet.c | 147 +++++++++++++++---
.../net/ethernet/broadcom/genet/bcmgenet.h | 4 +
2 files changed, 133 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 6e610e73e12f..f6a2567af7cb 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -35,6 +35,8 @@
#include <linux/ip.h>
#include <linux/ipv6.h>
#include <linux/phy.h>
+#include <linux/bpf_trace.h>
+#include <linux/filter.h>
#include <linux/unaligned.h>
@@ -2274,6 +2276,53 @@ static int bcmgenet_rx_refill(struct bcmgenet_rx_ring *ring,
return 0;
}
+static struct sk_buff *bcmgenet_xdp_build_skb(struct bcmgenet_rx_ring *ring,
+ struct xdp_buff *xdp,
+ struct page *rx_page)
+{
+ unsigned int metasize;
+ struct sk_buff *skb;
+
+ skb = napi_build_skb(xdp->data_hard_start, PAGE_SIZE);
+ if (unlikely(!skb))
+ return NULL;
+
+ skb_mark_for_recycle(skb);
+
+ metasize = xdp->data - xdp->data_meta;
+ skb_reserve(skb, xdp->data - xdp->data_hard_start);
+ __skb_put(skb, xdp->data_end - xdp->data);
+
+ if (metasize)
+ skb_metadata_set(skb, metasize);
+
+ return skb;
+}
+
+static unsigned int
+bcmgenet_run_xdp(struct bcmgenet_rx_ring *ring, struct bpf_prog *prog,
+ struct xdp_buff *xdp, struct page *rx_page)
+{
+ unsigned int act;
+
+ act = bpf_prog_run_xdp(prog, xdp);
+
+ switch (act) {
+ case XDP_PASS:
+ return XDP_PASS;
+ case XDP_DROP:
+ page_pool_put_full_page(ring->page_pool, rx_page, true);
+ return XDP_DROP;
+ default:
+ bpf_warn_invalid_xdp_action(ring->priv->dev, prog, act);
+ fallthrough;
+ case XDP_ABORTED:
+ trace_xdp_exception(ring->priv->dev, prog, act);
+ page_pool_put_full_page(ring->page_pool, rx_page, true);
+ return XDP_ABORTED;
+ }
+}
+
/* bcmgenet_desc_rx - descriptor based rx process.
* this could be called from bottom half, or from NAPI polling method.
*/
@@ -2283,6 +2332,7 @@ static unsigned int bcmgenet_desc_rx(struct bcmgenet_rx_ring *ring,
struct bcmgenet_rx_stats64 *stats = &ring->stats64;
struct bcmgenet_priv *priv = ring->priv;
struct net_device *dev = priv->dev;
+ struct bpf_prog *xdp_prog;
struct enet_cb *cb;
struct sk_buff *skb;
u32 dma_length_status;
@@ -2293,6 +2343,8 @@ static unsigned int bcmgenet_desc_rx(struct bcmgenet_rx_ring *ring,
unsigned int p_index, mask;
unsigned int discards;
+ xdp_prog = READ_ONCE(priv->xdp_prog);
+
/* Clear status before servicing to reduce spurious interrupts */
mask = 1 << (UMAC_IRQ1_RX_INTR_SHIFT + ring->index);
bcmgenet_intrl2_1_writel(priv, mask, INTRL2_CPU_CLEAR);
@@ -2403,26 +2455,52 @@ static unsigned int bcmgenet_desc_rx(struct bcmgenet_rx_ring *ring,
goto next;
} /* error packet */
- /* Build SKB from the page - data starts at hard_start,
- * frame begins after RSB(64) + pad(2) = 66 bytes.
- */
- skb = napi_build_skb(hard_start, PAGE_SIZE - GENET_XDP_HEADROOM);
- if (unlikely(!skb)) {
- BCMGENET_STATS64_INC(stats, dropped);
- page_pool_put_full_page(ring->page_pool, rx_page,
- true);
- goto next;
- }
-
- skb_mark_for_recycle(skb);
+ /* XDP: frame data starts after RSB + pad */
+ if (xdp_prog) {
+ struct xdp_buff xdp;
+ unsigned int xdp_act;
+ int pkt_len;
+
+ pkt_len = len - GENET_RSB_PAD;
+ if (priv->crc_fwd_en)
+ pkt_len -= ETH_FCS_LEN;
+
+ xdp_init_buff(&xdp, PAGE_SIZE, &ring->xdp_rxq);
+ xdp_prepare_buff(&xdp, page_address(rx_page),
+ GENET_RX_HEADROOM, pkt_len, false);
+
+ xdp_act = bcmgenet_run_xdp(ring, xdp_prog, &xdp,
+ rx_page);
+ if (xdp_act != XDP_PASS)
+ goto next;
+
+ /* XDP_PASS: build SKB from (possibly modified) xdp */
+ skb = bcmgenet_xdp_build_skb(ring, &xdp, rx_page);
+ if (unlikely(!skb)) {
+ BCMGENET_STATS64_INC(stats, dropped);
+ page_pool_put_full_page(ring->page_pool,
+ rx_page, true);
+ goto next;
+ }
+ } else {
+ /* Build SKB from the page - data starts at
+ * hard_start, frame begins after RSB(64) + pad(2).
+ */
+ skb = napi_build_skb(hard_start,
+ PAGE_SIZE - GENET_XDP_HEADROOM);
+ if (unlikely(!skb)) {
+ BCMGENET_STATS64_INC(stats, dropped);
+ page_pool_put_full_page(ring->page_pool,
+ rx_page, true);
+ goto next;
+ }
- /* Reserve the RSB + pad, then set the data length */
- skb_reserve(skb, GENET_RSB_PAD);
- __skb_put(skb, len - GENET_RSB_PAD);
+ skb_mark_for_recycle(skb);
+ skb_reserve(skb, GENET_RSB_PAD);
+ __skb_put(skb, len - GENET_RSB_PAD);
- if (priv->crc_fwd_en) {
- skb_trim(skb, skb->len - ETH_FCS_LEN);
- len -= ETH_FCS_LEN;
+ if (priv->crc_fwd_en)
+ skb_trim(skb, skb->len - ETH_FCS_LEN);
}
/* Set up checksum offload */
@@ -3743,6 +3821,37 @@ static int bcmgenet_change_carrier(struct net_device *dev, bool new_carrier)
return 0;
}
+static int bcmgenet_xdp_setup(struct net_device *dev,
+ struct netdev_bpf *xdp)
+{
+ struct bcmgenet_priv *priv = netdev_priv(dev);
+ struct bpf_prog *old_prog;
+ struct bpf_prog *prog = xdp->prog;
+
+ if (prog && dev->mtu > PAGE_SIZE - GENET_RX_HEADROOM -
+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info))) {
+ NL_SET_ERR_MSG_MOD(xdp->extack,
+ "MTU too large for single-page XDP buffer");
+ return -EOPNOTSUPP;
+ }
+
+ old_prog = xchg(&priv->xdp_prog, prog);
+ if (old_prog)
+ bpf_prog_put(old_prog);
+
+ return 0;
+}
+
+static int bcmgenet_xdp(struct net_device *dev, struct netdev_bpf *xdp)
+{
+ switch (xdp->command) {
+ case XDP_SETUP_PROG:
+ return bcmgenet_xdp_setup(dev, xdp);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
static const struct net_device_ops bcmgenet_netdev_ops = {
.ndo_open = bcmgenet_open,
.ndo_stop = bcmgenet_close,
@@ -3754,6 +3863,7 @@ static const struct net_device_ops bcmgenet_netdev_ops = {
.ndo_set_features = bcmgenet_set_features,
.ndo_get_stats64 = bcmgenet_get_stats64,
.ndo_change_carrier = bcmgenet_change_carrier,
+ .ndo_bpf = bcmgenet_xdp,
};
/* GENET hardware parameters/characteristics */
@@ -4056,6 +4166,7 @@ static int bcmgenet_probe(struct platform_device *pdev)
NETIF_F_RXCSUM;
dev->hw_features |= dev->features;
dev->vlan_features |= dev->features;
+ dev->xdp_features = NETDEV_XDP_ACT_BASIC;
netdev_sw_irq_coalesce_default_on(dev);
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
index 82a6d29f481d..1459473ac1b0 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
@@ -16,6 +16,7 @@
#include <linux/dim.h>
#include <linux/ethtool.h>
#include <net/page_pool/helpers.h>
+#include <linux/bpf.h>
#include <net/xdp.h>
#include "../unimac.h"
@@ -671,6 +672,9 @@ struct bcmgenet_priv {
u8 sopass[SOPASS_MAX];
struct bcmgenet_mib_counters mib;
+
+ /* XDP */
+ struct bpf_prog *xdp_prog;
};
static inline bool bcmgenet_has_40bits(struct bcmgenet_priv *priv)
--
2.51.0
next prev parent reply other threads:[~2026-03-15 21:50 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-15 21:49 [PATCH net-next v2 0/6] net: bcmgenet: add XDP support Nicolai Buchwitz
2026-03-15 21:49 ` [PATCH net-next v2 1/6] net: bcmgenet: convert RX path to page_pool Nicolai Buchwitz
2026-03-15 21:49 ` [PATCH net-next v2 2/6] net: bcmgenet: register xdp_rxq_info for each RX ring Nicolai Buchwitz
2026-03-15 21:49 ` Nicolai Buchwitz [this message]
2026-03-17 16:19 ` [net-next,v2,3/6] net: bcmgenet: add basic XDP support (PASS/DROP) Simon Horman
2026-03-17 19:27 ` Nicolai Buchwitz
2026-03-15 21:49 ` [PATCH net-next v2 4/6] net: bcmgenet: add XDP_TX support Nicolai Buchwitz
2026-03-17 16:20 ` [net-next,v2,4/6] " Simon Horman
2026-03-17 19:25 ` Nicolai Buchwitz
2026-03-15 21:49 ` [PATCH net-next v2 5/6] net: bcmgenet: add XDP_REDIRECT and ndo_xdp_xmit support Nicolai Buchwitz
2026-03-15 21:49 ` [PATCH net-next v2 6/6] net: bcmgenet: add XDP statistics counters Nicolai Buchwitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260315214914.1555777-4-nb@tipi-net.de \
--to=nb@tipi-net.de \
--cc=andrew+netdev@lunn.ch \
--cc=arnd@arndb.de \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bhargava.marreddy@broadcom.com \
--cc=davem@davemloft.net \
--cc=ebiggers@kernel.org \
--cc=edumazet@google.com \
--cc=florian.fainelli@broadcom.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mbloch@rooftopnetworks.de \
--cc=netdev@vger.kernel.org \
--cc=opendmb@gmail.com \
--cc=pabeni@redhat.com \
--cc=rajashekar.hudumula@broadcom.com \
--cc=vikas.gupta@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox