[PATCH v2 0/9] gpio: remove uneeded Kconfig dependencies on OF_GPIO

[PATCH v2 0/9] gpio: remove uneeded Kconfig dependencies on OF_GPIO

[Bartosz Golaszewski]

NOTE: Each patch in this series can be picked up independently into
maintainer trees.

CONFIG_OF_GPIO is a switch that enables the compilation of the gpiolib-of
module. The module itself handles GPIO lookup via the OF-node tree and
is automatically enabled on all OF systems. It does not export any
public symbols to drivers. There is no reason for them to select or
depend on it in Kconfig.

This series removes any such dependencies from Kconfig. If a given entry
has no other dependencies than OF_GPIO - they are converted to OF to
avoid new symbols popping up for everyone in make config.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
Changes in v2:
- Make gpio-watchdog depend on OF && GPIOLIB
- Drop picked up patches
- Link to v1: https://patch.msgid.link/20260304-gpio-of-kconfig-v1-0-d597916e79e7@oss.qualcomm.com

---
Bartosz Golaszewski (9):
      arm64: Kconfig: drop unneeded dependency on OF_GPIO
      net: mdio: drop unneeded dependency on OF_GPIO
      gpio: drop unneeded Kconfig dependencies on OF_GPIO
      leds: Kconfig: drop unneeded dependency on OF_GPIO
      watchdog: convert the Kconfig dependency on OF_GPIO to OF
      bus: drop unneeded dependency on OF_GPIO
      staging: media: max96712: drop unneeded dependency on OF_GPIO
      power: reset: drop unneeded dependencies on OF_GPIO
      media: i2c: drop unneeded dependencies on OF_GPIO

 arch/arm64/Kconfig.platforms           |  1 -
 drivers/bus/Kconfig                    |  2 +-
 drivers/gpio/Kconfig                   | 53 +++++++++++-----------------------
 drivers/leds/Kconfig                   |  1 -
 drivers/media/i2c/Kconfig              | 12 ++++----
 drivers/net/mdio/Kconfig               |  2 +-
 drivers/power/reset/Kconfig            |  8 ++---
 drivers/staging/media/max96712/Kconfig |  1 -
 drivers/watchdog/Kconfig               |  2 +-
 9 files changed, 29 insertions(+), 53 deletions(-)
---
base-commit: b84a0ebe421ca56995ff78b66307667b62b3a900
change-id: 20260304-gpio-of-kconfig-e257ea7c9a09

Best regards,
-- 
Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

[PATCH v2 1/9] arm64: Kconfig: drop unneeded dependency on OF_GPIO

[Bartosz Golaszewski]

OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs so there's really no reason to select it
explicitly.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 arch/arm64/Kconfig.platforms | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 54eb1d7fd419b4249a6860357da8b3dce2e2146d..9441ea827524df368f5aa1304b0122bebac3d245 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -245,7 +245,6 @@ config ARCH_MVEBU
 	select MVEBU_ODMI
 	select MVEBU_PIC
 	select MVEBU_SEI
-	select OF_GPIO
 	select PINCTRL
 	select PINCTRL_ARMADA_37XX
 	select PINCTRL_ARMADA_AP806

-- 
2.47.3

[PATCH v2 2/9] net: mdio: drop unneeded dependency on OF_GPIO

[Bartosz Golaszewski]

OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs so there's really no reason to select it
explicitly.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 drivers/net/mdio/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/mdio/Kconfig b/drivers/net/mdio/Kconfig
index 44380378911b7d72e7289951fca90282d731913d..d7ca7fce7a3b86a435fac035534260146f114bc7 100644
--- a/drivers/net/mdio/Kconfig
+++ b/drivers/net/mdio/Kconfig
@@ -247,7 +247,7 @@ config MDIO_BUS_MUX_BCM_IPROC
 
 config MDIO_BUS_MUX_GPIO
 	tristate "GPIO controlled MDIO bus multiplexers"
-	depends on OF_GPIO && OF_MDIO
+	depends on OF_MDIO
 	select MDIO_BUS_MUX
 	help
 	  This module provides a driver for MDIO bus multiplexers that

-- 
2.47.3

[PATCH v2 3/9] gpio: drop unneeded Kconfig dependencies on OF_GPIO

[Bartosz Golaszewski]

OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs so there's really no reason to select it
explicitly. Remove all Kconfig dependencies/selects for GPIO drivers.
For those that have no other dependencies: convert it to requiring
CONFIG_OF instead to avoid new symbols popping up in make config.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 drivers/gpio/Kconfig | 53 +++++++++++++++++-----------------------------------
 1 file changed, 17 insertions(+), 36 deletions(-)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b45fb799e36c19794e56bbac7539250c09beaeb7..e649384f436e7fdd6ac633d9caad94bbee724439 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -145,7 +145,7 @@ menu "Memory mapped GPIO drivers"
 
 config GPIO_74XX_MMIO
 	tristate "GPIO driver for 74xx-ICs with MMIO access"
-	depends on OF_GPIO
+	depends on OF
 	select GPIO_GENERIC
 	help
 	  Say yes here to support GPIO functionality for 74xx-compatible ICs
@@ -175,14 +175,14 @@ config GPIO_AMDPT
 
 config GPIO_ASPEED
 	tristate "Aspeed GPIO support"
-	depends on (ARCH_ASPEED || COMPILE_TEST) && OF_GPIO
+	depends on ARCH_ASPEED || COMPILE_TEST
 	select GPIOLIB_IRQCHIP
 	help
 	  Say Y here to support Aspeed AST2400 and AST2500 GPIO controllers.
 
 config GPIO_ASPEED_SGPIO
 	bool "Aspeed SGPIO support"
-	depends on (ARCH_ASPEED || COMPILE_TEST) && OF_GPIO
+	depends on ARCH_ASPEED || COMPILE_TEST
 	select GPIO_GENERIC
 	select GPIOLIB_IRQCHIP
 	help
@@ -201,7 +201,6 @@ config GPIO_ATH79
 config GPIO_RASPBERRYPI_EXP
 	tristate "Raspberry Pi 3 GPIO Expander"
 	default RASPBERRYPI_FIRMWARE
-	depends on OF_GPIO
 	# Make sure not 'y' when RASPBERRYPI_FIRMWARE is 'm'. This can only
 	# happen when COMPILE_TEST=y, hence the added !RASPBERRYPI_FIRMWARE.
 	depends on (ARCH_BCM2835 && RASPBERRYPI_FIRMWARE) || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE)
@@ -218,7 +217,7 @@ config GPIO_BCM_KONA
 
 config GPIO_BCM_XGS_IPROC
 	tristate "BRCM XGS iProc GPIO support"
-	depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
 	select GPIO_GENERIC
 	select GPIOLIB_IRQCHIP
 	default ARCH_BCM_IPROC
@@ -229,7 +228,6 @@ config GPIO_BLZP1600
 	tristate "Blaize BLZP1600 GPIO support"
 	default y if ARCH_BLAIZE
 	depends on ARCH_BLAIZE || COMPILE_TEST
-	depends on OF_GPIO
 	select GPIO_GENERIC
 	select GPIOLIB_IRQCHIP
 	help
@@ -240,7 +238,7 @@ config GPIO_BLZP1600
 config GPIO_BRCMSTB
 	tristate "BRCMSTB GPIO support"
 	default y if (ARCH_BRCMSTB || BMIPS_GENERIC)
-	depends on OF_GPIO && (ARCH_BRCMSTB || ARCH_BCM2835 || BMIPS_GENERIC || COMPILE_TEST)
+	depends on ARCH_BRCMSTB || ARCH_BCM2835 || BMIPS_GENERIC || COMPILE_TEST
 	select GPIO_GENERIC
 	select IRQ_DOMAIN
 	help
@@ -248,7 +246,7 @@ config GPIO_BRCMSTB
 
 config GPIO_CADENCE
 	tristate "Cadence GPIO support"
-	depends on OF_GPIO
+	depends on OF
 	select GPIO_GENERIC
 	select GPIOLIB_IRQCHIP
 	help
@@ -280,14 +278,13 @@ config GPIO_DWAPB
 config GPIO_EIC_SPRD
 	tristate "Spreadtrum EIC support"
 	depends on ARCH_SPRD || COMPILE_TEST
-	depends on OF_GPIO
 	select GPIOLIB_IRQCHIP
 	help
 	  Say yes here to support Spreadtrum EIC device.
 
 config GPIO_EM
 	tristate "Emma Mobile GPIO"
-	depends on (ARCH_EMEV2 || COMPILE_TEST) && OF_GPIO
+	depends on ARCH_EMEV2 || COMPILE_TEST
 	help
 	  Say yes here to support GPIO on Renesas Emma Mobile SoCs.
 
@@ -329,7 +326,7 @@ config GPIO_GE_FPGA
 
 config GPIO_FTGPIO010
 	bool "Faraday FTGPIO010 GPIO"
-	depends on OF_GPIO
+	depends on OF
 	select GPIO_GENERIC
 	select GPIOLIB_IRQCHIP
 	default (ARCH_GEMINI || ARCH_MOXART)
@@ -383,7 +380,7 @@ config GPIO_HISI
 
 config GPIO_HLWD
 	tristate "Nintendo Wii (Hollywood) GPIO"
-	depends on OF_GPIO
+	depends on OF
 	select GPIO_GENERIC
 	select GPIOLIB_IRQCHIP
 	help
@@ -434,7 +431,6 @@ config GPIO_LOONGSON
 config GPIO_LOONGSON_64BIT
 	tristate "Loongson 64 bit GPIO support"
 	depends on LOONGARCH || COMPILE_TEST
-	depends on OF_GPIO
 	select GPIO_GENERIC
 	select GPIOLIB_IRQCHIP
 	help
@@ -447,7 +443,7 @@ config GPIO_LOONGSON_64BIT
 config GPIO_LPC18XX
 	tristate "NXP LPC18XX/43XX GPIO support"
 	default y if ARCH_LPC18XX
-	depends on OF_GPIO && (ARCH_LPC18XX || COMPILE_TEST)
+	depends on ARCH_LPC18XX || COMPILE_TEST
 	select IRQ_DOMAIN_HIERARCHY
 	select GPIOLIB_IRQCHIP
 	help
@@ -456,7 +452,7 @@ config GPIO_LPC18XX
 
 config GPIO_LPC32XX
 	tristate "NXP LPC32XX GPIO support"
-	depends on OF_GPIO && (ARCH_LPC32XX || COMPILE_TEST)
+	depends on ARCH_LPC32XX || COMPILE_TEST
 	help
 	  Select this option to enable GPIO driver for
 	  NXP LPC32XX devices.
@@ -499,7 +495,6 @@ config GPIO_MPC8XXX
 config GPIO_MT7621
 	bool "Mediatek MT7621 GPIO Support"
 	depends on SOC_MT7620 || SOC_MT7621 || COMPILE_TEST
-	depends on OF_GPIO
 	select GPIO_GENERIC
 	select GPIOLIB_IRQCHIP
 	help
@@ -592,7 +587,6 @@ config GPIO_RCAR
 config GPIO_RDA
 	bool "RDA Micro GPIO controller support"
 	depends on ARCH_RDA || COMPILE_TEST
-	depends on OF_GPIO
 	select GPIO_GENERIC
 	select GPIOLIB_IRQCHIP
 	help
@@ -642,7 +636,6 @@ config GPIO_RTD
 config GPIO_SAMA5D2_PIOBU
 	tristate "SAMA5D2 PIOBU GPIO support"
 	depends on MFD_SYSCON
-	depends on OF_GPIO
 	depends on ARCH_AT91 || COMPILE_TEST
 	select GPIO_SYSCON
 	help
@@ -654,7 +647,7 @@ config GPIO_SAMA5D2_PIOBU
 
 config GPIO_SIFIVE
 	tristate "SiFive GPIO support"
-	depends on OF_GPIO
+	depends on OF
 	select IRQ_DOMAIN_HIERARCHY
 	select GPIO_GENERIC
 	select GPIOLIB_IRQCHIP
@@ -673,7 +666,6 @@ config GPIO_SIOX
 config GPIO_SNPS_CREG
 	bool "Synopsys GPIO via CREG (Control REGisters) driver"
 	depends on ARC || COMPILE_TEST
-	depends on OF_GPIO
 	help
 	  This driver supports GPIOs via CREG on various Synopsys SoCs.
 	  This is a single-register MMIO GPIO driver for complex cases
@@ -683,7 +675,6 @@ config GPIO_SNPS_CREG
 config GPIO_SPACEMIT_K1
 	tristate "SPACEMIT K1 GPIO support"
 	depends on ARCH_SPACEMIT || COMPILE_TEST
-	depends on OF_GPIO
 	select GPIO_GENERIC
 	select GPIOLIB_IRQCHIP
 	help
@@ -699,7 +690,6 @@ config GPIO_SPEAR_SPICS
 config GPIO_SPRD
 	tristate "Spreadtrum GPIO support"
 	depends on ARCH_SPRD || COMPILE_TEST
-	depends on OF_GPIO
 	select GPIOLIB_IRQCHIP
 	help
 	  Say yes here to support Spreadtrum GPIO device.
@@ -707,7 +697,6 @@ config GPIO_SPRD
 config GPIO_STP_XWAY
 	bool "XWAY STP GPIOs"
 	depends on SOC_XWAY || COMPILE_TEST
-	depends on OF_GPIO
 	help
 	  This enables support for the Serial To Parallel (STP) unit found on
 	  XWAY SoC. The STP allows the SoC to drive a shift registers cascade,
@@ -742,7 +731,6 @@ config GPIO_TEGRA
 	tristate "NVIDIA Tegra GPIO support"
 	default ARCH_TEGRA
 	depends on ARCH_TEGRA || COMPILE_TEST
-	depends on OF_GPIO
 	select GPIOLIB_IRQCHIP
 	select IRQ_DOMAIN_HIERARCHY
 	help
@@ -752,7 +740,6 @@ config GPIO_TEGRA186
 	tristate "NVIDIA Tegra186 GPIO support"
 	default ARCH_TEGRA_186_SOC || ARCH_TEGRA_194_SOC || ARCH_TEGRA_234_SOC
 	depends on ARCH_TEGRA_186_SOC || ARCH_TEGRA_194_SOC || ARCH_TEGRA_234_SOC || COMPILE_TEST
-	depends on OF_GPIO
 	select GPIOLIB_IRQCHIP
 	select IRQ_DOMAIN_HIERARCHY
 	help
@@ -760,7 +747,6 @@ config GPIO_TEGRA186
 
 config GPIO_TS4800
 	tristate "TS-4800 DIO blocks and compatibles"
-	depends on OF_GPIO
 	depends on SOC_IMX51 || COMPILE_TEST
 	select GPIO_GENERIC
 	help
@@ -780,7 +766,6 @@ config GPIO_THUNDERX
 config GPIO_UNIPHIER
 	tristate "UniPhier GPIO support"
 	depends on ARCH_UNIPHIER || COMPILE_TEST
-	depends on OF_GPIO
 	select IRQ_DOMAIN_HIERARCHY
 	help
 	  Say yes here to support UniPhier GPIOs.
@@ -797,7 +782,6 @@ config GPIO_VF610
 config GPIO_VISCONTI
 	tristate "Toshiba Visconti GPIO support"
 	depends on ARCH_VISCONTI || COMPILE_TEST
-	depends on OF_GPIO
 	select GPIOLIB_IRQCHIP
 	select GPIO_GENERIC
 	select IRQ_DOMAIN_HIERARCHY
@@ -806,14 +790,14 @@ config GPIO_VISCONTI
 
 config GPIO_WCD934X
 	tristate "Qualcomm Technologies Inc WCD9340/WCD9341 GPIO controller driver"
-	depends on MFD_WCD934X && OF_GPIO
+	depends on MFD_WCD934X
 	help
          This driver is to support GPIO block found on the Qualcomm Technologies
 	 Inc WCD9340/WCD9341 Audio Codec.
 
 config GPIO_XGENE
 	bool "APM X-Gene GPIO controller support"
-	depends on ARM64 && OF_GPIO
+	depends on ARM64
 	help
 	  This driver is to support the GPIO block within the APM X-Gene SoC
 	  platform's generic flash controller. The GPIO pins are muxed with
@@ -1111,7 +1095,7 @@ menu "I2C GPIO expanders"
 
 config GPIO_ADNP
 	tristate "Avionic Design N-bit GPIO expander"
-	depends on OF_GPIO
+	depends on OF
 	select GPIOLIB_IRQCHIP
 	help
 	  This option enables support for N GPIOs found on Avionic Design
@@ -1144,7 +1128,7 @@ config GPIO_DS4520
 
 config GPIO_GW_PLD
 	tristate "Gateworks PLD GPIO Expander"
-	depends on OF_GPIO
+	depends on OF
 	help
 	  Say yes here to provide access to the Gateworks I2C PLD GPIO
 	  Expander. This is used at least on the Cambria GW2358-4.
@@ -1567,7 +1551,6 @@ config GPIO_PALMAS
 config GPIO_PMIC_EIC_SPRD
 	tristate "Spreadtrum PMIC EIC support"
 	depends on MFD_SC27XX_PMIC || COMPILE_TEST
-	depends on OF_GPIO
 	select GPIOLIB_IRQCHIP
 	help
 	  Say yes here to support Spreadtrum PMIC EIC device.
@@ -1606,7 +1589,6 @@ config GPIO_SL28CPLD
 config GPIO_STMPE
 	tristate "STMPE GPIOs"
 	depends on MFD_STMPE
-	depends on OF_GPIO
 	select GPIOLIB_IRQCHIP
 	help
 	  This enables support for the GPIOs found on the STMPE I/O
@@ -1615,7 +1597,6 @@ config GPIO_STMPE
 config GPIO_TC3589X
 	bool "TC3589X GPIOs"
 	depends on MFD_TC3589X
-	depends on OF_GPIO
 	select GPIOLIB_IRQCHIP
 	help
 	  This enables support for the GPIOs found on the TC3589X
@@ -2005,7 +1986,7 @@ config GPIO_LATCH
 
 config GPIO_LINE_MUX
 	tristate "GPIO line mux driver"
-	depends on OF_GPIO
+	depends on OF
 	select MULTIPLEXER
 	help
 	  Say Y here to support the GPIO line mux, which can provide virtual

-- 
2.47.3

[PATCH v2 4/9] leds: Kconfig: drop unneeded dependency on OF_GPIO

[Bartosz Golaszewski]

OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs so there's really no reason to select it
explicitly.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 drivers/leds/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 597d7a79c988b35f304e953e873af3afe2ae04b8..f4a0a3c8c8705e0f10ba26584277dbb2d5eac5b5 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -765,7 +765,6 @@ config LEDS_NETXBIG
 	tristate "LED support for Big Network series LEDs"
 	depends on LEDS_CLASS
 	depends on MACH_KIRKWOOD || COMPILE_TEST
-	depends on OF_GPIO
 	default MACH_KIRKWOOD
 	help
 	  This option enables support for LEDs found on the LaCie 2Big

-- 
2.47.3

Re: (subset) [PATCH v2 4/9] leds: Kconfig: drop unneeded dependency on OF_GPIO

[Lee Jones]

On Mon, 16 Mar 2026 10:45:24 +0100, Bartosz Golaszewski wrote:
> OF_GPIO is selected automatically on all OF systems. Any symbols it
> controls also provide stubs so there's really no reason to select it
> explicitly.

Applied, thanks!

[4/9] leds: Kconfig: drop unneeded dependency on OF_GPIO
      commit: b727ba2560a8a806680b45c9acc5a49bc39b8e43

--
Lee Jones [李琼斯]

[PATCH v2 5/9] watchdog: convert the Kconfig dependency on OF_GPIO to OF

[Bartosz Golaszewski]

OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs so there's really no reason to select it
explicitly. We could simply remove the dependency but in order to avoid
a new symbol popping up for everyone in make config - just convert it to
requiring CONFIG_OF.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 drivers/watchdog/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index dc78729ba2a5d6e035ed3cbe5c2b631d11b76b20..ab1d5d6df5f32f084c893a7af54d040082a3b6f3 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -250,7 +250,7 @@ config DA9062_WATCHDOG
 
 config GPIO_WATCHDOG
 	tristate "Watchdog device controlled through GPIO-line"
-	depends on OF_GPIO
+	depends on OF && GPIOLIB
 	select WATCHDOG_CORE
 	help
 	  If you say yes here you get support for watchdog device

-- 
2.47.3

[PATCH v2 6/9] bus: drop unneeded dependency on OF_GPIO

[Bartosz Golaszewski]

OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs so there's really no reason to select it
explicitly.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 drivers/bus/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 3181d8aa32a3e3ec26935afdbde1ef647f425fd5..e4b1db809187fc5f8b39e3950776df94005476ad 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -216,7 +216,7 @@ config TI_SYSC
 config TS_NBUS
 	tristate "Technologic Systems NBUS Driver"
 	depends on SOC_IMX28
-	depends on OF_GPIO && PWM
+	depends on PWM
 	help
 	  Driver for the Technologic Systems NBUS which is used to interface
 	  with the peripherals in the FPGA of the TS-4600 SoM.

-- 
2.47.3

[PATCH v2 7/9] staging: media: max96712: drop unneeded dependency on OF_GPIO

[Bartosz Golaszewski]

OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs so there's really no reason to select it
explicitly.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 drivers/staging/media/max96712/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/staging/media/max96712/Kconfig b/drivers/staging/media/max96712/Kconfig
index 117fadf81bd086cc3e5e95210503000d9e4d8738..93a2d583e90ddb2b797c5167a6d3373836e88126 100644
--- a/drivers/staging/media/max96712/Kconfig
+++ b/drivers/staging/media/max96712/Kconfig
@@ -2,7 +2,6 @@
 config VIDEO_MAX96712
 	tristate "Maxim MAX96712 Quad GMSL2 Deserializer support"
 	depends on I2C
-	depends on OF_GPIO
 	depends on VIDEO_DEV
 	select V4L2_FWNODE
 	select VIDEO_V4L2_SUBDEV_API

-- 
2.47.3

[PATCH v2 8/9] power: reset: drop unneeded dependencies on OF_GPIO

[Bartosz Golaszewski]

OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs so there's really no reason to select it
explicitly. For Kconfig entries that have no other dependencies: convert
it to requiring OF to avoid new symbols popping up for everyone in make
config, for others just drop it altogether.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 drivers/power/reset/Kconfig | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index f6c1bcbb57deff3568d6b1b326454add3b3bbf06..8af398b4e6f7fc5f2ecd92f11d03c43cdefe1ab6 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -97,7 +97,7 @@ config POWER_RESET_GEMINI_POWEROFF
 
 config POWER_RESET_GPIO
 	bool "GPIO power-off driver"
-	depends on OF_GPIO
+	depends on OF
 	help
 	  This driver supports turning off your board via a GPIO line.
 	  If your board needs a GPIO high/low to power down, say Y and
@@ -105,7 +105,7 @@ config POWER_RESET_GPIO
 
 config POWER_RESET_GPIO_RESTART
 	bool "GPIO restart driver"
-	depends on OF_GPIO
+	depends on OF
 	help
 	  This driver supports restarting your board via a GPIO line.
 	  If your board needs a GPIO high/low to restart, say Y and
@@ -181,7 +181,7 @@ config POWER_RESET_PIIX4_POWEROFF
 
 config POWER_RESET_LTC2952
 	bool "LTC2952 PowerPath power-off driver"
-	depends on OF_GPIO
+	depends on OF
 	help
 	  This driver supports an external powerdown trigger and board power
 	  down via the LTC2952. Bindings are made in the device tree.
@@ -198,7 +198,7 @@ config POWER_RESET_MT6323
 
 config POWER_RESET_QNAP
 	bool "QNAP power-off driver"
-	depends on OF_GPIO && PLAT_ORION
+	depends on PLAT_ORION
 	help
 	  This driver supports turning off QNAP NAS devices by sending
 	  commands to the microcontroller which controls the main power.

-- 
2.47.3

[PATCH v2 9/9] media: i2c: drop unneeded dependencies on OF_GPIO

[Bartosz Golaszewski]

OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs so there's really no reason to select it
explicitly. For Kconfig entries that have no other dependencies: convert
it to requiring OF to avoid new symbols popping up for everyone in make
config, for others just drop it altogether.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 drivers/media/i2c/Kconfig | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 20482be35f268221b2a14a73f4cac107fa0ffa93..1bfc7f0f0fffd395c548c8ce36d4e31931efd093 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -237,7 +237,7 @@ config VIDEO_IMX319
 
 config VIDEO_IMX334
 	tristate "Sony IMX334 sensor support"
-	depends on OF_GPIO
+	depends on OF
 	select V4L2_CCI_I2C
 	help
 	  This is a Video4Linux2 sensor driver for the Sony
@@ -248,7 +248,7 @@ config VIDEO_IMX334
 
 config VIDEO_IMX335
 	tristate "Sony IMX335 sensor support"
-	depends on OF_GPIO
+	depends on OF
 	select V4L2_CCI_I2C
 	help
 	  This is a Video4Linux2 sensor driver for the Sony
@@ -268,7 +268,7 @@ config VIDEO_IMX355
 
 config VIDEO_IMX412
 	tristate "Sony IMX412 sensor support"
-	depends on OF_GPIO
+	depends on OF
 	help
 	  This is a Video4Linux2 sensor driver for the Sony
 	  IMX412 camera.
@@ -278,7 +278,7 @@ config VIDEO_IMX412
 
 config VIDEO_IMX415
 	tristate "Sony IMX415 sensor support"
-	depends on OF_GPIO
+	depends on OF
 	select V4L2_CCI_I2C
 	help
 	  This is a Video4Linux2 sensor driver for the Sony
@@ -690,7 +690,7 @@ config VIDEO_OV8865
 
 config VIDEO_OV9282
 	tristate "OmniVision OV9282 sensor support"
-	depends on OF_GPIO
+	depends on OF
 	select V4L2_CCI_I2C
 	help
 	  This is a Video4Linux2 sensor driver for the OmniVision
@@ -1246,7 +1246,6 @@ config VIDEO_BT866
 config VIDEO_ISL7998X
 	tristate "Intersil ISL7998x video decoder"
 	depends on VIDEO_DEV && I2C
-	depends on OF_GPIO
 	select MEDIA_CONTROLLER
 	select VIDEO_V4L2_SUBDEV_API
 	select V4L2_FWNODE
@@ -1284,7 +1283,6 @@ config VIDEO_MAX9286
 	tristate "Maxim MAX9286 GMSL deserializer support"
 	depends on I2C && I2C_MUX
 	depends on VIDEO_DEV
-	depends on OF_GPIO
 	select V4L2_FWNODE
 	select VIDEO_V4L2_SUBDEV_API
 	select MEDIA_CONTROLLER

-- 
2.47.3

Re: (subset) [PATCH v2 0/9] gpio: remove uneeded Kconfig dependencies on OF_GPIO

[Bartosz Golaszewski]

On Mon, 16 Mar 2026 10:45:20 +0100, Bartosz Golaszewski wrote:
> NOTE: Each patch in this series can be picked up independently into
> maintainer trees.
> 
> CONFIG_OF_GPIO is a switch that enables the compilation of the gpiolib-of
> module. The module itself handles GPIO lookup via the OF-node tree and
> is automatically enabled on all OF systems. It does not export any
> public symbols to drivers. There is no reason for them to select or
> depend on it in Kconfig.
> 
> [...]

Applied, thanks!

[3/9] gpio: drop unneeded Kconfig dependencies on OF_GPIO
      https://git.kernel.org/brgl/c/7803501e5754dc4b295ab22b20562e2b965358ba

Best regards,
-- 
Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>