From: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
To: kys@microsoft.com, haiyangz@microsoft.com, wei.liu@kernel.org,
decui@microsoft.com, longli@microsoft.com, andrew+netdev@lunn.ch,
davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com, kotaranov@microsoft.com, horms@kernel.org,
shradhagupta@linux.microsoft.com, dipayanroy@linux.microsoft.com,
yury.norov@gmail.com, kees@kernel.org,
ssengar@linux.microsoft.com, ernis@linux.microsoft.com,
gargaditya@linux.microsoft.com, shirazsaleem@microsoft.com,
linux-hyperv@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-rdma@vger.kernel.org
Subject: [PATCH net-next v3] net: mana: Expose hardware diagnostic info via debugfs
Date: Mon, 16 Mar 2026 04:23:27 -0700 [thread overview]
Message-ID: <20260316112339.1208155-1-ernis@linux.microsoft.com> (raw)
Add debugfs entries to expose hardware configuration and diagnostic
information that aids in debugging driver initialization and runtime
operations without adding noise to dmesg.
The debugfs directory creation and removal for each PCI device is
integrated into mana_gd_setup() and mana_gd_cleanup_device()
respectively, so that all callers (probe, remove, suspend, resume,
shutdown) share a single code path.
Device-level entries (under /sys/kernel/debug/mana/<slot>/):
- num_msix_usable, max_num_queues: Max resources from hardware
- gdma_protocol_ver, pf_cap_flags1: VF version negotiation results
- num_vports, bm_hostmode: Device configuration
Per-vPort entries (under /sys/kernel/debug/mana/<slot>/vportN/):
- port_handle: Hardware vPort handle
- max_sq, max_rq: Max queues from vPort config
- indir_table_sz: Indirection table size
- steer_rx, steer_rss, steer_update_tab, steer_cqe_coalescing:
Last applied steering configuration parameters
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
---
Changes in v3:
* Rename mana_gd_cleanup to mana_gd_cleanup_device.
* Add creation of debugfs entries in mana_gd_setup.
* Add removal of debugfs entries in mana_gd_cleanup_device.
* Remove bm_hostmode and num_vports from debugfs in mana_remove itself,
because "ac" gets freed before debugfs_remove_recursive, to avoid
Use-After-Free error.
* Add "goto out:" in mana_cfg_vport_steering to avoid populating apc
values when resp.hdr.status is not NULL.
Changes in v2:
* Add debugfs_remove_recursice for gc>mana_pci_debugfs in
mana_gd_suspend to handle multiple duplicates creation in
mana_gd_setup and mana_gd_resume path.
* Move debugfs creation for num_vports and bm_hostmode out of
if(!resuming) condition since we have to create it again even for
resume.
* Recreate mana_pci_debugfs in mana_gd_resume.
---
.../net/ethernet/microsoft/mana/gdma_main.c | 65 ++++++++++---------
drivers/net/ethernet/microsoft/mana/mana_en.c | 35 ++++++++++
include/net/mana/gdma.h | 1 +
include/net/mana/mana.h | 8 +++
4 files changed, 79 insertions(+), 30 deletions(-)
diff --git a/drivers/net/ethernet/microsoft/mana/gdma_main.c b/drivers/net/ethernet/microsoft/mana/gdma_main.c
index ef0dbfaac8f4..4d77e7fa565a 100644
--- a/drivers/net/ethernet/microsoft/mana/gdma_main.c
+++ b/drivers/net/ethernet/microsoft/mana/gdma_main.c
@@ -169,6 +169,11 @@ static int mana_gd_query_max_resources(struct pci_dev *pdev)
if (gc->max_num_queues > gc->num_msix_usable - 1)
gc->max_num_queues = gc->num_msix_usable - 1;
+ debugfs_create_u32("num_msix_usable", 0400, gc->mana_pci_debugfs,
+ &gc->num_msix_usable);
+ debugfs_create_u32("max_num_queues", 0400, gc->mana_pci_debugfs,
+ &gc->max_num_queues);
+
return 0;
}
@@ -1239,6 +1244,13 @@ int mana_gd_verify_vf_version(struct pci_dev *pdev)
return err ? err : -EPROTO;
}
gc->pf_cap_flags1 = resp.pf_cap_flags1;
+ gc->gdma_protocol_ver = resp.gdma_protocol_ver;
+
+ debugfs_create_x64("gdma_protocol_ver", 0400, gc->mana_pci_debugfs,
+ &gc->gdma_protocol_ver);
+ debugfs_create_x64("pf_cap_flags1", 0400, gc->mana_pci_debugfs,
+ &gc->pf_cap_flags1);
+
if (resp.pf_cap_flags1 & GDMA_DRV_CAP_FLAG_1_HWC_TIMEOUT_RECONFIG) {
err = mana_gd_query_hwc_timeout(pdev, &hwc->hwc_timeout);
if (err) {
@@ -1918,15 +1930,23 @@ static int mana_gd_setup(struct pci_dev *pdev)
struct gdma_context *gc = pci_get_drvdata(pdev);
int err;
+ if (gc->is_pf)
+ gc->mana_pci_debugfs = debugfs_create_dir("0", mana_debugfs_root);
+ else
+ gc->mana_pci_debugfs = debugfs_create_dir(pci_slot_name(pdev->slot),
+ mana_debugfs_root);
+
err = mana_gd_init_registers(pdev);
if (err)
- return err;
+ goto remove_debugfs;
mana_smc_init(&gc->shm_channel, gc->dev, gc->shm_base);
gc->service_wq = alloc_ordered_workqueue("gdma_service_wq", 0);
- if (!gc->service_wq)
- return -ENOMEM;
+ if (!gc->service_wq) {
+ err = -ENOMEM;
+ goto remove_debugfs;
+ }
err = mana_gd_setup_hwc_irqs(pdev);
if (err) {
@@ -1966,11 +1986,14 @@ static int mana_gd_setup(struct pci_dev *pdev)
mana_gd_remove_irqs(pdev);
free_workqueue:
destroy_workqueue(gc->service_wq);
+remove_debugfs:
+ debugfs_remove_recursive(gc->mana_pci_debugfs);
+ gc->mana_pci_debugfs = NULL;
dev_err(&pdev->dev, "%s failed (error %d)\n", __func__, err);
return err;
}
-static void mana_gd_cleanup(struct pci_dev *pdev)
+static void mana_gd_cleanup_device(struct pci_dev *pdev)
{
struct gdma_context *gc = pci_get_drvdata(pdev);
@@ -1982,6 +2005,10 @@ static void mana_gd_cleanup(struct pci_dev *pdev)
destroy_workqueue(gc->service_wq);
gc->service_wq = NULL;
}
+
+ debugfs_remove_recursive(gc->mana_pci_debugfs);
+ gc->mana_pci_debugfs = NULL;
+
dev_dbg(&pdev->dev, "mana gdma cleanup successful\n");
}
@@ -2039,12 +2066,6 @@ static int mana_gd_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
gc->dev = &pdev->dev;
xa_init(&gc->irq_contexts);
- if (gc->is_pf)
- gc->mana_pci_debugfs = debugfs_create_dir("0", mana_debugfs_root);
- else
- gc->mana_pci_debugfs = debugfs_create_dir(pci_slot_name(pdev->slot),
- mana_debugfs_root);
-
err = mana_gd_setup(pdev);
if (err)
goto unmap_bar;
@@ -2073,16 +2094,8 @@ static int mana_gd_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
cleanup_mana:
mana_remove(&gc->mana, false);
cleanup_gd:
- mana_gd_cleanup(pdev);
+ mana_gd_cleanup_device(pdev);
unmap_bar:
- /*
- * at this point we know that the other debugfs child dir/files
- * are either not yet created or are already cleaned up.
- * The pci debugfs folder clean-up now, will only be cleaning up
- * adapter-MTU file and apc->mana_pci_debugfs folder.
- */
- debugfs_remove_recursive(gc->mana_pci_debugfs);
- gc->mana_pci_debugfs = NULL;
xa_destroy(&gc->irq_contexts);
pci_iounmap(pdev, bar0_va);
free_gc:
@@ -2132,11 +2145,7 @@ static void mana_gd_remove(struct pci_dev *pdev)
mana_rdma_remove(&gc->mana_ib);
mana_remove(&gc->mana, false);
- mana_gd_cleanup(pdev);
-
- debugfs_remove_recursive(gc->mana_pci_debugfs);
-
- gc->mana_pci_debugfs = NULL;
+ mana_gd_cleanup_device(pdev);
xa_destroy(&gc->irq_contexts);
@@ -2158,7 +2167,7 @@ int mana_gd_suspend(struct pci_dev *pdev, pm_message_t state)
mana_rdma_remove(&gc->mana_ib);
mana_remove(&gc->mana, true);
- mana_gd_cleanup(pdev);
+ mana_gd_cleanup_device(pdev);
return 0;
}
@@ -2197,11 +2206,7 @@ static void mana_gd_shutdown(struct pci_dev *pdev)
mana_rdma_remove(&gc->mana_ib);
mana_remove(&gc->mana, true);
- mana_gd_cleanup(pdev);
-
- debugfs_remove_recursive(gc->mana_pci_debugfs);
-
- gc->mana_pci_debugfs = NULL;
+ mana_gd_cleanup_device(pdev);
pci_disable_device(pdev);
}
diff --git a/drivers/net/ethernet/microsoft/mana/mana_en.c b/drivers/net/ethernet/microsoft/mana/mana_en.c
index ea71de39f996..3beaddb1d585 100644
--- a/drivers/net/ethernet/microsoft/mana/mana_en.c
+++ b/drivers/net/ethernet/microsoft/mana/mana_en.c
@@ -1263,6 +1263,9 @@ static int mana_query_vport_cfg(struct mana_port_context *apc, u32 vport_index,
apc->port_handle = resp.vport;
ether_addr_copy(apc->mac_addr, resp.mac_addr);
+ apc->vport_max_sq = *max_sq;
+ apc->vport_max_rq = *max_rq;
+
return 0;
}
@@ -1405,10 +1408,16 @@ static int mana_cfg_vport_steering(struct mana_port_context *apc,
netdev_err(ndev, "vPort RX configuration failed: 0x%x\n",
resp.hdr.status);
err = -EPROTO;
+ goto out;
}
netdev_info(ndev, "Configured steering vPort %llu entries %u\n",
apc->port_handle, apc->indir_table_sz);
+
+ apc->steer_rx = rx;
+ apc->steer_rss = apc->rss_state;
+ apc->steer_update_tab = update_tab;
+ apc->steer_cqe_coalescing = req->cqe_coalescing_enable;
out:
kfree(req);
return err;
@@ -3110,6 +3119,24 @@ static int mana_init_port(struct net_device *ndev)
eth_hw_addr_set(ndev, apc->mac_addr);
sprintf(vport, "vport%d", port_idx);
apc->mana_port_debugfs = debugfs_create_dir(vport, gc->mana_pci_debugfs);
+
+ debugfs_create_u64("port_handle", 0400, apc->mana_port_debugfs,
+ &apc->port_handle);
+ debugfs_create_u32("max_sq", 0400, apc->mana_port_debugfs,
+ &apc->vport_max_sq);
+ debugfs_create_u32("max_rq", 0400, apc->mana_port_debugfs,
+ &apc->vport_max_rq);
+ debugfs_create_u32("indir_table_sz", 0400, apc->mana_port_debugfs,
+ &apc->indir_table_sz);
+ debugfs_create_u32("steer_rx", 0400, apc->mana_port_debugfs,
+ &apc->steer_rx);
+ debugfs_create_u32("steer_rss", 0400, apc->mana_port_debugfs,
+ &apc->steer_rss);
+ debugfs_create_u32("steer_update_tab", 0400, apc->mana_port_debugfs,
+ &apc->steer_update_tab);
+ debugfs_create_u32("steer_cqe_coalescing", 0400, apc->mana_port_debugfs,
+ &apc->steer_cqe_coalescing);
+
return 0;
reset_apc:
@@ -3598,6 +3625,11 @@ int mana_probe(struct gdma_dev *gd, bool resuming)
ac->bm_hostmode = bm_hostmode;
+ debugfs_create_u16("num_vports", 0400, gc->mana_pci_debugfs,
+ &ac->num_ports);
+ debugfs_create_u8("bm_hostmode", 0400, gc->mana_pci_debugfs,
+ &ac->bm_hostmode);
+
if (!resuming) {
ac->num_ports = num_ports;
@@ -3738,6 +3770,9 @@ void mana_remove(struct gdma_dev *gd, bool suspending)
mana_gd_deregister_device(gd);
+ debugfs_lookup_and_remove("num_vports", gc->mana_pci_debugfs);
+ debugfs_lookup_and_remove("bm_hostmode", gc->mana_pci_debugfs);
+
if (suspending)
return;
diff --git a/include/net/mana/gdma.h b/include/net/mana/gdma.h
index 7fe3a1b61b2d..c4e3ce5147f7 100644
--- a/include/net/mana/gdma.h
+++ b/include/net/mana/gdma.h
@@ -442,6 +442,7 @@ struct gdma_context {
struct gdma_dev mana_ib;
u64 pf_cap_flags1;
+ u64 gdma_protocol_ver;
struct workqueue_struct *service_wq;
diff --git a/include/net/mana/mana.h b/include/net/mana/mana.h
index a078af283bdd..83f6de67c0cc 100644
--- a/include/net/mana/mana.h
+++ b/include/net/mana/mana.h
@@ -563,6 +563,14 @@ struct mana_port_context {
/* Debugfs */
struct dentry *mana_port_debugfs;
+
+ /* Cached vport/steering config for debugfs */
+ u32 vport_max_sq;
+ u32 vport_max_rq;
+ u32 steer_rx;
+ u32 steer_rss;
+ u32 steer_update_tab;
+ u32 steer_cqe_coalescing;
};
netdev_tx_t mana_start_xmit(struct sk_buff *skb, struct net_device *ndev);
--
2.43.0
next reply other threads:[~2026-03-16 11:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-16 11:23 Erni Sri Satya Vennela [this message]
2026-03-19 2:36 ` [PATCH net-next v3] net: mana: Expose hardware diagnostic info via debugfs Jakub Kicinski
2026-03-19 6:48 ` Erni Sri Satya Vennela
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260316112339.1208155-1-ernis@linux.microsoft.com \
--to=ernis@linux.microsoft.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=decui@microsoft.com \
--cc=dipayanroy@linux.microsoft.com \
--cc=edumazet@google.com \
--cc=gargaditya@linux.microsoft.com \
--cc=haiyangz@microsoft.com \
--cc=horms@kernel.org \
--cc=kees@kernel.org \
--cc=kotaranov@microsoft.com \
--cc=kuba@kernel.org \
--cc=kys@microsoft.com \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=longli@microsoft.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=shirazsaleem@microsoft.com \
--cc=shradhagupta@linux.microsoft.com \
--cc=ssengar@linux.microsoft.com \
--cc=wei.liu@kernel.org \
--cc=yury.norov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox